Distinctive Feature: International well situated
|
|
- Marshall Brent Lamb
- 6 years ago
- Views:
Transcription
1 News & Trends in Industrial Production Distinctive Feature: International well situated Market concentration and globalization are two trends which will define the development of the automotive industry and mechanical engineering over the coming years. They also hold great challenges for their suppliers particularly for mediumsized companies in the forging industry. The German forging industry enjoys a reputation as technology leader. In Europe it is the clear market leader; globally, it is number two after China. Last year, around 250 companies produced almost two billion components with a total weight of around 2.9 million tons and a value of 8.5 billion euros. It was primarily small and mediumsized companies which contributed to this success more than every third company in the industry only has up to 49 employees. Having to expand in distant countries abroad involves considerable effort for such companies, says industry expert Franz Saliger, who has been responsible for the area of forging at process monitoring specialist, BRANKAMP, for almost 25 years. No matter whether it is in Eastern Europe, India or China, the same unconditional quality requirements are valid at all locations. Everywhere customers place the highest demands on process efficiency and productivity. One of the key elements in mastering this challenge even as a small company are modern process monitoring technologies. These technologies enable optimized quality and improved degrees of utilization. At the same time, they prevent process errors or shut down machines promptly in the event of malfunction. At the same time, the systems used form the basis for a production network, referred to as FactoryNet. This allows production locations across the world to be controlled centrally, for example. Yet the technology is only one side of the coin: For our customers, availability worldwide, local service and investment security are also decisive factors, says Franz Saliger. These requirements have now led to the formation of a new provider in the area of process monitoring. Under the umbrel- la of the Italian MARPOSS Group, the world s largest enterprise in the industry has been generated. This combines the advantages of strong medium-sized brands such as ARTIS, BRANKAMP, SANTec or DITTEL with those of an integrated Group. Since March 2012, BRANKAMP has also been part of the MARPOSS Group. BRANKAMP can now draw on a close-knit network of 80 locations in 23 countries. We are particularly strong in Germany, the US, Japan and China. We have a potential of around 300 service technicians worldwide who are in close proximity to our customers and who speak their language. That represents a real advantage for our customers, says Franz Saliger. BRANKAMP at the wire trade fair: Hall 15, Booth 15H35 ECO 600 The system sets new standards in its class. Page 4 Gripper Monitoring BRANKAMP can recognize transfer failures by measuring gripper movement. Page 3 X3 High-tech tightly arranged. Page 5 Imprint Published by: BRANKAMP GmbH, Max-Planck-Straße 9, D Erkrath Responsible for content under the German press law: Hans-Peter Schneider Editorial work and design: Enterpress
2 Page 2 Innovative MARPOSS-Solutions for the Forging Industry The MARPOSS Group is one of the ten largest patent applicants in the European Union in the segment for modern production engineering. BRANKAMP customers profit from direct access to new types of technology from this strong group of companies. Here are two examples, among others, which will be shown at the wire trade fair. Eddy Current Test by MARPOSS BRANKAMP will exhibit a material test using eddy currents. This technology is a non-destructive test used for characterization of materials. It is based on measuring the amplitude and phase of eddy currents. MARPOSS customers have successfully used this technology to produce camshafts or fastening elements, for example. Thread Testing with ARTIS DDU ARTIS, headquartered in Lunenburg Heath, Lower Saxony, will demonstrate the contact-free DDU sensor system, which enables torque and axial forces to be measured equally. The system is used in an industrial context in thread drilling and testing, for example.
3 Page 3 Gripper Monitoring on Hot Forging Presses On automated multi-stage presses, BRANKAMP can recognize whether transfer failures are occurring between the individual stages by measuring gripper movement. Together with development partner Volkswagen AG in Kassel, the innovative technology has been developed to market maturity. Photo: Hatebur press force The goal of this new method is to measure the gripper movement on automated multi-stage presses when a part is inserted into the transport gripper, explains Dr.-Ing. Thomas Terzyk, CEO of Prokos GmbH, a company of the BRANKAMP Group. The new monitoring method was developed together with Dipl. Ing. Björn Hesse, Process Optimization Forge, Volkswagen AG Kassel. With the aid of the new sensor, it is possible to check at an early stage whether and how a part is ejected and transported. The monitoring system recognizes precisely if a part is inserted into the gripper incorrectly. In cases where a part should not be present, such as during bar transfer when billets are dropped, the existing material can nevertheless be recognized reliably. This is also the case if a part remains stuck to the punch or if a part cannot be ejected from the die and is thus not transported, says Mr. Hesse. The special issue Through this new measurement method, we can measure gripper movement to ensure reliable recognition of transfer errors between the individual stages, adds Dr. Thomas Terzyk. Transfer errors are often an indication of ejector or tool failure. Now we can detect this at such gripper movement an early stage that we can intervene even before the next stroke, thereby preventing massive tool damage. The innovative sensor technology can be retrofitted easily. The measuring signals of the new type of distance sensors on the gripper can be assessed problem-free by all current BRANKAMP Process- Monitoring systems. Volkswagen AG in Kassel inspired the development of the new measurement technology. Together with the Volkswagen team, we initially worked on comprehensive fundamental analyses for gripper monitoring. To do this, we carried out precise measurements under realistic conditions for various applications. The new system was used on different Hatebur machines, says Dr. Terzyk. Now, at every stage, we can precisely record the movement of the transport grippers when parts are inserted and ejected as well as during transport, thereby further increasing process reliability.
4 Page 4 Simply Clever : The new Standard BRANKAMP exhibits the newly developed ECO 600-system at wire trade fair in Düsseldorf. Die Vorteile des BRANKAMP ECO 600-Systems auf einen Blick: monitoring and visualisation of six parallel sensor signals compact system with 9 touch screen eeasy-to-use and very little training effort Duomatic: double envelope curve technology to ensure the quality of the parts quick Installation for rapid and easy installation on all metal forming presses and thread rolling machines Process Quality factor - a reliable indicator for the quality of the entire process Stop & Go Diagram records the running and down-times over the last 7 days and creates the fever chart of the plant multi-channel display of the stage-related maximum force with its preset limits numerous counters: order counter, tool counter, total counter, sorting and dose function Powerful programs to monitor maximum force, envelope curves, trend etc. for all forming processes The BRANKAMP ECO 600 is optimized for use in the forming industry. The operator can even select configuration for the relevant machine type from the menu of this innovative system. Irrespective of whether it is a multi-stage press or a thread roller, operation of the ProcessMonitoring system is the same across the entire production line thanks to the universal All with one click: further information about the new BRANKAMP ECO 600. Come and experience the innovative BRAN- KAMP ECO 200-system at the wire 2014 BRANKAMP ECO 600. The BRAN- KAMP ECO 600 is a robust Process- Monitoring system which can be used to solve virtually all standard applications in a hassle-free way, says Franz Saliger from BRANKAMP. Furthermore, thanks to a new type of system architecture, the BRANKAMP ECO 600 is available at a highly competitive
5 A Step Ahead due Technology: BRANKAMP X3 High-tech tightly arranged: BRANKAMP shows the innovative X3-system at the wire trade fair. The innovative X3 system from BRAN- KAMP can handle much more than just standard applications. It is equipped with a patented algorithm for crack detection as well as with innovative Quattromatic envelope curve signal Here you ll find further information about the innovative BRANKAMP X3-system. processing for detecting and sorting micro chipping during running production. Thus, the BRANKAMP X3 fits seamlessly into the high-quality X Series, which is characterized in particular by its technological Page 5 The advantages of the BRANKAMP X3 at a glance: attractive device design with integrated warning lamps (Superlux) 9 inch display touch screen multi-curve display (up to six) tool memory for up to ten different tools tool safety device for up to 16 inputs with one query per channel up to 16 cam outputs Special monitoring program for thread rollers (optional with line up aide) FactoryNet LAN compatible as a standard, W-LAN optional Come and experience the whole X-series at the wire 2014
6 March 2014 Edition 1 Volume 31 Page 6 Crack Detection thanks to Innovative TrifleX Measuring Technology The innovative TrifleX measuring sensor from BRANKAMP provides enhanced inprocess control for detecting material cracks on parts produced with multi-stage presses. Due to the complexity of formed parts on the one hand and the quality requirements of the automotive industry on the other, the demands placed on modern ProcessMonitoring systems have grown enormously over the past few years. Brankamp is meeting these demands with the innovative development of new sensors, signal processing methods and ProcessMonitoring systems. The measurement BRANKAMP GmbH Max-Planck-Str Erkrath Germany signal is considerably more precise and is not influenced by neighboring production stages or the travel of the adjustment wedge. Specially developed performance hardware and software in the systems of the X-series analyze the input signals and react even to the slightest changes in amplitude. This ensures that material cracks and microchipping are recognized reliably. Phone Fax Web +49/ 211/ / 211/ bpd@brankamp.com Come and experience the comprehensive range of sensors at the wire 2014 BRANKAMP is directly present worldwide in 27 countries by the sales and service network from the MARPOSS Group and also represented in other countries via authorized dealers.
Beam Shaping Excellence
Beam Shaping Excellence 300 patents 200 employees 13 countries 2 Every photon. In the right place, at the right time. LIMO: The world of beam shaping Whether it's materials processing, illumination or
More informationMechanical Engineering in Baden-Württemberg High-quality machines, first-class technologies and smart solutions for Industry 4.0 Baden-Württemberg is
Mechanical Engineering in Baden-Württemberg High-quality machines, first-class technologies and smart solutions for Industry 4.0 Baden-Württemberg is the centre of German mechanical engineering Facts and
More informationN e w s R e l e a s e
N e w s R e l e a s e Infineon Austria achieves double-digit growth and takes the vanguard of Industry 4.0 in Austria year-end statement for fiscal year 2014 New Management Board team since April 2014
More informationPress release Page 1 20th April 2016
Press release Page 1 20th April 2016 12 th Interbrush 27th 29th April 2016, Messe Freiburg Interview with Ulrich Zahoransky about Interbrush: This is where investment decisions are made Ulrich Zaharonsky
More informationOtto Bihler Maschinenfabrik GmbH & Co. KG
Otto Bihler Maschinenfabrik GmbH & Co. KG WELCOME Dear Readers, Welcome to Bihler. For over 60 years, our family-owned company stands for cutting-edge technology made in Germany. More than 1000 employees
More informationPowermat Series. The Revolutionary New Moulder Concept
Powermat Series The Revolutionary New Moulder Concept WEINIG presents: The New Moulder Generation Super-fast processing of solid wood and composite materials, such as MDF and even plastic. Designed to
More informationGEA proplus. The major plus in protein yield, with GEA Separators
GEA proplus The major plus in protein yield, with GEA Separators 2 GEA PROPLUS GEA proplus for better milk skimming and bacterial removal Protein yields Protect the environment Steady operation A win-win
More informationRoller shutter systems Sun blinds
Individual system solutions for roller shutters and sun blinds D&M Rolladentechnik GmbH Auf den Dorfwiesen 1-5 D-56204 Hillscheid / Germany Tel.: +49 26 24 20 81-0 Fax: +49 26 24 20 83 info@dundm.com www.dundm.com
More informationMetalsa: Automated Quality Control of Formed Sheet Metal Parts
Application Note Metalsa: Automated Quality Control of Formed Sheet Metal Parts Location / country: Bergneustadt, Germany GOM system: ATOS ScanBox 6130 GOM software: ATOS Professional Sector: automotive
More informationDiMod 307 and SAE J211-1 Compliance. Dipl.-Ing. (FH) Jochen Schulz, Service Engineer, Kistler Automotive GmbH, Heidelberg, Germany
DiMod 307 and SAE J211-1 Compliance Dipl.-Ing. (FH) Jochen Schulz, Service Engineer, Kistler Automotive GmbH, 69126 Heidelberg, Germany Contents 1 Performance Requirements for a Data Channel...3 2 Linearity
More informationAKH FAS-NER SYSTEM. Joining Expertise with Technology. Joining Expertise with Technology. AKH Inc. AKH FASNER IN CROSS-SECTION A PROVEN SOLID JOINT
I N S E R T I O N P R E S S E S S E L F P I E R C I N G F L U S H A K H F A S - N E R S AKH FAS-NER SYSTEM AKH FASNER IN CROSS-SECTION Since 1981, AKH has provided the engineering and manufacturing support
More informationPERFECTION AND DIVERSITY
PERFECTION AND DIVERSITY WHY BÖTTCHER? Elastomer compounds for a wide variety of applications have played a major role at Böttcher in the more recent decades of our more than 275-year history. Leading
More informationFrom analysis to the future
Leading International Trade Fair DÜSSELDORF, GERMANY 18 21 NOVEMBER 2019 www.medica.de Member of BE PART OF THE NO. 1! WORLD FORUM FOR MEDICINE From analysis to the future Laboratory equipment and diagnostics
More informationAMADA MACHINE TOOLS EUROPE
AMADA MACHINE TOOLS EUROPE PRODUCT OVERVIEW MILLING TECHNOLOGY THV DUPLEX MILLING MACHINES PMH PLATE MILLING MACHINES AMADA MACHINE TOOLS Headquarters in Japan (Isehara) High-tech Development Centre near
More informationPerspectives.
www.blanco-germany.com BLANCO GmbH + Co KG Flehinger Strasse 59 75038 Oberderdingen GERMANY Tel. +49 7045 44-81100 Fax +49 7045 44-81299 info@blanco.de www.blanco-germany.com 4677/12-14 SAP 191 895 BLANCO
More informationFlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company
FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company The universal genius from RAIMANN: FlexiRip is synonymous with flexible ripping The original Jrion from Raimann stands for
More informationKistler Instrumente GmbH has new German headquarters.
Press Release Kistler Instrumente GmbH has new German headquarters. Following a long phase of planning, preparations, and conversion work, Kistler Instrumente GmbH has a new home for its German headquarters
More informationCONTACTS: Michaela Hessling Executive Director Corporate Communications Tel
Aurubis continues developing its strategy Group working on a more effective organization, an increase in productivity and a sustainable improvement in earnings Resolution for dividend payment of 1.10 per
More informationKistler View2017. Understanding in order to change. Page 3 Measurement solutions for the challenges of our times. Page 4 Direct path to test results
Kistler View2017 Understanding in order to change Page 3 Measurement solutions for the challenges of our times Page 4 Direct path to test results Page 5 Industry 4.0 starts with us Page 6 Measuring the
More informationBeyond Traditional Trade Show Exhibits, Taiwan Encouraging Plant Tours
FEATURE Beyond Traditional Trade Show Exhibits, Taiwan Encouraging Plant Tours The 2016 Taiwan International Fastener Show is designed to be more than distributors walking trade show aisles and talking
More informationInterview with Prof. Dr. Stefan Mecheels, CEO Hohenstein Institute in Bönnigheim (Germany)
Press information Competence in textiles - worldwide Interview with Prof. Dr. Stefan Mecheels, CEO Hohenstein Institute in Bönnigheim (Germany) 21-Oct-2013 524-EN BÖNNIGHEIM (ri) The Hohenstein Institute
More informationPresse- Information. First of its kind: nibbler for fiber composite materials
First of its kind: nibbler for fiber composite materials Handheld TRUMPF power tool punches CFRP // Drastic reduction in emissions // Long service life of wear parts Ditzingen, April 2017 TRUMPF has developed
More informationMeets Cobots. The NEW Collaborative SCHUNK Gripper
The NEW Collaborative SCHUNK Gripper Meets Cobots Superior Clamping and Gripping Top Performance in the Team SCHUNK is the world s No. 1 for clamping technology and gripping systems from the smallest parallel
More informationAhead of the times with PLUG & WORK
Ahead of the times with PLUG & WORK SMS SIEMAG X-Pact Electrics and Automation Saving time A competitive edge YOUR BENEFITS FROM PLUG & WORK The sooner a new or revamped plant goes on stream and reaches
More informationKistler View2015. Smart Measuring Solutions for Self-Regulated Production Processes. Get Better. With Kistler.
Kistler View2015 Smart Measuring Solutions for Self-Regulated Production Processes. Get Better. With Kistler. Page 4 Development Partner on the Innovation Front. Page 5 Smart Systems for Smart Factories.
More informationInvestment Location Baden-Württemberg Strong economy, excellent research landscape, modern infrastructure Baden-Württemberg is the leading innovation
Investment Location Baden-Württemberg Strong economy, excellent research landscape, modern infrastructure Baden-Württemberg is the leading innovation region in Germany and Europe Attractive location for
More informationTurning the wheels of your success
INDUSTRIAL SERVICES Turning the wheels of your success A comprehensive package of integrated services combining traditional certification and inspection with innovative business solutions based on the
More informationHIGH TECH FOR HIGH PURITY
HIGH TECH FOR HIGH PURITY - HISTORY Company founding as a metalworking shop in Munich First installation of a high purity gas system at the SIEMENS AG, Munich Making history the innovative way The history
More informationRobotics and Automation at a glance
Robotics + Automation Robotics and Automation at a glance The sector the association the suppliers 2 ROBOTICS + AUTOMATION About the sector* Sector turnover: 15.8 bn EUR Employees: > 60.000 Export ratio:
More informationFinger jointing lines CombiPact
Finger jointing lines CombiPact High performance for horizontal and vertical joints WEINIG GRECON Finger jointing line CombiPact State-of-the-art technology for tomorrows demand GRECON is the leading manufacturer
More informationTackling complexity Information technology is underestimated Mechanical engineering and software in medium-sized companies
Tackling complexity Industry 4.0 is the basis for competitive mechanical engineering when it comes to the industrial world of the future. The networking of machines, information and people is providing
More informationSmall, Fine and Precise
Small, Fine and Precise Convenient, safe and reliable: Everyday life without a car is unimaginable. But what would happen if we had to get to an appointment quickly and the vehicle lets us down? What if
More informationIn-line eddy current testing of wire rod
In-line eddy current testing of wire rod By Dr. Thomas Knöll Dr. Thomas Knöll is Managing Director of, Ismaning, Germany. This article appeared in Millennium Steel Journal 2004 and has been reprinted with
More informationPresentation, Conference and Media Technology
Presentation, Conference and Media Technology Paulinus Hohmann Preface Paulinus Hohmann "Innovation means more than just keeping up with the market. It means being one step ahead of it at all times." The
More informationNIIGON - For the Future
competence TWO:17 IN DIALOGUE - Robert Schad, Athena 36 37 NIIGON - For the Future An interview with Robert Schad, Chairman of Athena Automation Ltd., on the challenges to enter an established market At
More informationFluid Technology Automation Technology smart buildings Technology
Fluid Technology Automation Technology smart buildings Technology THE PARTNER OF Higher Standards 002003 Hainzl Technology for Higher Standards Engineering & system competence 004-005 Production ServicE
More informationPress Release 19 December 2017
3 rd Symposium on Driving Simulation Experts discuss the technical progress of driving simulation en route to autonomous driving Fellbach/Stuttgart, - Around 75 participants gathered in Braunschweig on
More informationPAVE-TM LAYER THICKNESS MEASUREMENT
PAVE-TM LAYER THICKNESS MEASUREMENT With more than 40 years experience in road construction and the development of market leading systems like MOBA-matic and Big Sonic-Ski, MOBA Mobile Automation AG is
More informationANALYZING START-UP AND INVESTMENT TRENDS IN THE MOBILITY ECOSYSTEM
Matthias Kässer, Thibaut Müller, and Andreas Tschiesner ANALYZING START-UP AND INVESTMENT TRENDS IN THE MOBILITY ECOSYSTEM November 2017 How can companies identify and source the technologies that will
More informationSwiss-type & multispindle PRODUCT RANGE
Swiss-type & multispindle PRODUCT RANGE Y41 S42 Z41 Y41 X41 S42 X41 Z41 C41 Z11 C41 S12 X31 Z31 Y21 X21 S31 S21 C11 Y11 X11 X31 Z31 S31 Y21 X21 S21 C11 Z11 Y11 X11 EvoDECO 10 EvoDECO 20 & EvoDECO 32 X41
More informationTHE ITALIAN MACHINE TOOL ROBOT AND AUTOMATION INDUSTRY
THE ITALIAN MACHINE TOOL ROBOT AND AUTOMATION INDUSTRY MAJOR MANUFACTURING COUNTRIES IN 2016 China 20,687 +3.9% Germany Japan United States Italy South Korea Taiwan Switzerland 3,370 2,700 3,901 5,341
More informationsavages have grown up
26 decomagazine 01-2017 PRESENTATION From a supplier to a system The young partner in the medical industry savages have grown up Meinolf Skudlarek once had a vision when he founded his own company at the
More informationThere is always a good argument for Kopp.
1 There is always a good argument for Kopp. We operate at full voltage. Welcome to Kopp. Inspiring with quality. This is what everything we do at Kopp is about. And this is why we have been one of the
More informationSPIRAL PIPE PLANTS. Tailor-made solutions with measurable benefits
SPIRAL PIPE PLANTS Tailor-made solutions with measurable benefits SMS GROUP Leaders in plant construction and machine engineering The SMS group unites global players in the construction of plants and machines
More informationHeavy metal in concrete
Press release Waldachtal, March 19, 2019 A new addition to the fischer concrete screw family ULTRACUT FBS II Heavy metal in concrete The fixing specialist fischer is expanding its range of concrete screws
More informationAutomotive Industry in Baden-Württemberg World-class vehicles, innovative technologies, intelligent mobility solutions Baden-Württemberg is a leading
Automotive Industry in Baden-Württemberg World-class vehicles, innovative technologies, intelligent mobility solutions Baden-Württemberg is a leading location of the global automotive industry Facts and
More informationAVENTICS: AGILE, FOCUSED, AND WITH PASSION FOR TOMORROW S MARKETS
AVENTICS: AGILE, FOCUSED, AND WITH PASSION FOR TOMORROW S MARKETS troduction AVENTICS Our ambition is to become known as the smart pneumatic engineering company that is easy to do business with. Paul Cleaver,
More information2010 IRI Annual Meeting R&D in Transition
2010 IRI Annual Meeting R&D in Transition U.S. Semiconductor R&D in Transition Dr. Peter J. Zdebel Senior VP and CTO ON Semiconductor May 4, 2010 Some Semiconductor Industry Facts Founded in the U.S. approximately
More informationCompany Profile. Jongen. Werkzeugtechnik
Company Profile Jongen Werkzeugtechnik Company Profile Jongen Werkzeugtechnik GmbH has been founded in 1974 and has its headquarter in Willich, near Düsseldorf, Germany. Jongen Werkzeugtechnik GmbH is
More informationHorizontal finger jointing lines HS
Horizontal finger jointing lines HS The innovative solution for horizontal finger jointing WEINIG GRECON high-capacity horizontal finger jointing lines technology and speed for economical and efficient
More informationX-Shape Precise flatness measurement and control
X-Shape Precise flatness measurement and control X-SHAPE Precise X-Shape flatness measuring system with measuring rollers of the latest generation. Challenge In addition to constant strip thickness, the
More informationAUTOMOTIVE REFINISH PRODUCT CATALOGUE
AUTOMOTIVE REFINISH PRODUCT CATALOGUE JAPAN S NUMBER 1 AUTOMOTIVE COATINGS MANUFACTURER JAPAN S NUMBER 1 AUTOMOTIVE COATINGS MANUFACTURER FROM JAPAN, NOW SERVING THE GLOBE With nearly 10,000 employees
More informationCamGrind L. Key data. Superproductive and perfect for batch production. A member of the United Grinding Group
A member of the United Grinding Group Superproductive and perfect for batch production Key data The as a single-slide or two-slide machine allows you to machine shaft-type components with a length of up
More informationAutomotive Fasteners for Automotive Industry
Automotive Fasteners for Automotive Industry PEINER Umformtechnik GmbH Woltorfer Straße 20-24 D-31224 Peine Phone + 49 (0) 5171 545-0 Fax + 49 (0) 5171 545-180 e- mail sales@peiner-ut.com Internet www.peiner-ut.com
More informationTraining Modules 2018
INFO-BROCHURE Training Modules 2018 Training Modules for M17 Ultrasonic Wire Bonders and M17LSB Laserbonders Only highly trained employees get the best from bonding technology. Therefore we support our
More informationFestool: 90 years of motivation for the future
Festool Wendlingen (Germany) April 2015 Press release for the industry press Infoline for reader and journalists TTS Tooltechnic Systems GB Ltd Burcham, Jonathon Saxham Business Park Suffolk IP28 6RX Bury
More informationClamping Testing Automation. A world of individual solutions
Clamping Testing Automation A world of individual solutions SPREITZER a name that stands for precision The family company SPREITZER PRECISION TOOLS was founded in 1983 by Johann Spreitzer for the development,
More informationHalf-Year Press Conference
Half-Year Press Conference 11 May 2017 Prof. Dr. Michael Kaschke President & CEO ZEISS Group, Half-Year Press Conference 2016/17 Thomas Spitzenpfeil Chief Financial Officer 11 May 2017 Prof. Dr. Michael
More informationPWF Kunststofftechnik GmbH & Co. KG PWF a competent partner for automotive suppliers
August 2017, Kottingbrunn/Austria USER REPORT PWF Kunststofftechnik GmbH & Co. KG PWF a competent partner for automotive suppliers PWF Kunststofftechnik, domiciled in Glinde near Hamburg/Germany, specializes
More informationAM Manufacturing Module Perfection in the high performance connecting rod machining segment
AM Manufacturing Module Perfection in the high performance connecting rod machining segment 01 CONTENT Page Application 3 Machine concept 4 Connecting rod machining 8 Process quality 9 Loading and automation
More informationHochperformante Inline-3D-Messung
Hochperformante Inline-3D-Messung mittels Lichtfeld Dipl.-Ing. Dorothea Heiss Deputy Head of Business Unit High Performance Image Processing Digital Safety & Security Department AIT Austrian Institute
More informationWho we are. How we think.
www.ebmpapst.com English 37775-7-8811 pr+co - 06/17-1.5 ebm-papst Mulfingen GmbH & Co. KG ebm-papst St. Georgen GmbH & Co. KG ebm-papst Landshut GmbH Bachmühle 2 74673 Mulfingen Germany Phone + 49 7938
More informationUSER REPORT. Healthcare service with the assistance of WITTMANN BATTENFELD. Greiner Bio-One International AG:
April 2011, Kottingbrunn/Austria USER REPORT Greiner Bio-One International AG: Healthcare service with the assistance of WITTMANN BATTENFELD In February of this year, Greiner Bio-One International had
More informationMeet the. Organic and Printed. Electronics Industry. A working group within
Meet the Organic and Printed Electronics Industry A working group within What is the OE-A? The OE-A (Organic and Printed Electronics Association) is the leading international industry association for organic
More informationOVERVIEW MANAGEMENT BOARD INTRO EMPLOYEES WORLDWIDE HISTORY RANGE OF BUSINESS MARKETS & SOLUTIONS SALES. Navigation
WELCOME TO MOBA OVERVIEW INTRO HISTORY MANAGEMENT BOARD WORLDWIDE EMPLOYEES SALES RANGE OF BUSINESS KNOW-HOW PRODUCTS MARKETS & SOLUTIONS INTRO +40 YEARS OF EXPERIENCE IN MOBILE AUTOMATION Made in Germany
More informationCamGrind S. Key data. Small and versatile. A member of the UNITED GRINDING Group
A member of the UNITED GRINDING Group Small and versatile Key data The allows you to grind shaft-type workpieces with a length of up to 650 mm. This small, versatile grinding machine guarantees high-precision
More informationOptiCut S 90 Vario Series. The fully automatic cutting center for modern woodworking
OptiCut S 90 Vario Series The fully automatic cutting center for modern woodworking New DIMTER concept OptiCut S 90: Economical cutting including all options High cutting accuracy, flexibility and maximum
More informationSpecial Machines. Ultrasonic Technology Automotive Industry
Special Machines Ultrasonic Technology Automotive Industry Building special machines Development and production from one source One of more than 1000 special machines, which we have produced in our company
More informationKASTOssb A 2: Fully Automatic Bandsawing Machine for Mass Production Cuts.
KASTOssb A 2: Fully Automatic Bandsawing Machine for Mass Production Cuts. KASTOssb: More Economic Mass Production Cutting. Great performance, efficient footprint. The vertically running saw blade characterizes
More informationcontrolled energy Å V^
controlled energy Å V^ Interview with Ralf Schwarzkopf, CEO of Hotset GmbH What are the reasons for these changes? And this has changed hotset s self-perception? hotset is presenting itself with a new
More informationFace the future of manufacturing. Visitor information
Connecting Global Competence Face the future of manufacturing Visitor information The Leading Exhibition for Smart Automation and Robotics June 19 22, 2018 Munich automatica-munich.com automatica. Our
More informationVision with foresight
Vision with foresight At SensoPar t we already anticipate the future of automation Our standard is not what is possible today, but the vision of what will be achievable in future this has been our credo
More informationMicroControl: high quality products, premium service, satisfied customers
Making your systems precise, reliable and high-quality. MicroControl: high quality products, premium service, satisfied customers From proven, standard products to tailor-made, special solutions, MicroControl
More informationALFING KESSLER SONDERMASCHINEN. The AS Product Line. Single-spindle machining center for high speed machining of light metal parts
ALFING KESSLER SONDERMASCHINEN The AS Product Line Single-spindle machining center for high speed machining of light metal parts Rivenditore autorizzato (Authorizedd dealer) Techservice srl S.S. per Voghera
More informationadaptivemechanical adaptive
Mechanical clamping elements mechanical 6 Content Product group 6 Sliding clamp, mechanical 6.2210 Clamping block, mechanical 6.2212 High-pressure spindle, mechanical with integral wedge system 6.2270
More informationSportradar esports Service. Unlocking the incredible potential of esports
Sportradar esports Service Unlocking the incredible potential of esports esports A global mass phenomenon with a bright future! esports REVENUE GROWTH Total revenue growth 2015-2020 of 35,6 percent CAGR
More informationGlobal Partner Summit 2017: Competing to Win
February 14 17 Napa, California Global Partner Summit 2017: Competing to Win Global Partner Summit 2017: Competing to Win 1 Why Germany? Stephan Reimelt President and CEO Germany and Austria Why Germany?
More information4 Who we are: 24 Careers: The company. Careers for experienced professionals. Shareholders/investors. Careers for recent graduates.
Spring 2009 1 2 1 4 Who we are: The company Shareholders/investors Management team 24 Careers: Careers for experienced professionals Careers for recent graduates 28 Contact us 16 Our mission and guiding
More informationHegla: MACHINES AND SYSTEMS IN REAL-TIME OPERATION AT GLASSTEC MACHINERY ON SHOW
Among other things, Hegla presented four cutting lines, two ReMaster systems and a SortJet in operation on over 1500m 2 of display area. During glasstec, the machines and systems convinced customers of
More informationKKS Circular Sawing Machines
If Steel is Your Deal! KKS Circular Sawing www.kaltenbach.com 1 The complete KALTENBACH program for metal processing 2 www.kaltenbach.com 3 The Economical One Applications: locksmith s shop, metal construction,
More informationPress release. A powerful motivator and a hard worker: On the 70th birthday of Dr. Friedhelm Loh. Friedhelm Loh Group
Portrait of a visionary: Dr. Friedhelm Loh at 70 A powerful motivator and a hard worker: On the 70th birthday of Dr. Friedhelm Loh The s success story is inextricably linked with its owner, and not only
More informationOil can talk. We understand the message.
Oil can talk We understand the message www.oelcheck.com Oil can talk We understand the message High performance and still full of power reserves or already used and contaminated and posing serious risks
More informationVacuum Automation. Compact Terminal SCTMi
Vacuum Automation WWW.SCHMALZ.COM/AUTOMATION Flexible, fully networked vacuum generation Variety, optimization of production processes, and continuous energy and process control are the challenges of the
More informationOur mission. Tooling systems and application consulting for the milling of complex 2.5 and 3D geometries
Our mission Tooling systems and application consulting for the milling of complex 2.5 and 3D geometries Who we are Pokolm Frästechnik GmbH & Co. KG stands for the development and manufacture of innovative,
More informationTool Shop. TCM Servicecenter Bochum GmbH TOOL CONSULTING & MANAGEMENT. Copyright Servicecenter Bochum 07/08/2006 Page 1 of 10
Tool Shop TCM Servicecenter Bochum GmbH Servicecenter Bochum 07/08/2006 Page 1 of 10 We See Ourselves as Partners Good partnership to us means to manufacture highquality machine- and equipment components
More informationExploring the full potential of Industry 4.0 in plastics processing
INSTITUT FÜR KUNSTSTOFFVERARBEITUNG IN INDUSTRIE UND HANDWERK AN DER RWTH AACHEN Exploring the full potential of Industry 4.0 in plastics processing Joint potential analysis and readiness study (Arburg)
More informationCustomer intimacy. Vision. Sense of tradition, sound engineering knowledge and sophisticated technology for our customers' success.
Vision Vision Sense of tradition, sound engineering knowledge and sophisticated technology for our customers' success We are a customer-oriented, internationally operating company committed to tradition.
More informationMAGNATEST D. Magneto-Inductive Component Testing for Magnetic and Electrical Properties
MAGNATEST D Magneto-Inductive Component Testing for Magnetic and Electrical Properties COMPONENT TESTING (CT) The Company FOERSTER is a global technology leader for non-destructive testing of metallic
More informationThe group of companies
The group of companies www.kirchhoff-group.com WE.MOVE.FUTURE. The shareholders of the KIRCHHOFF Group (f.l.t.r.): Arndt G. Kirchhoff, Dr. Johannes F. Kirchhoff, Dr.-Ing. Jochen F. Kirchhoff, J. Wolfgang
More informationWelcome at RIM Plus. Manufacturing Network and Best Practice in Baden-Württemberg and Stuttgart Region Dipl.Ing. Gunther Rieger
Welcome at RIM Plus and many more.. Manufacturing Network and Best Practice in Baden-Württemberg and Stuttgart Region Dipl.Ing. Gunther Rieger 14.11.2016 Today s Mission at RIM Plus in Bruxelles PRESENTATION
More informationAdvanced Technology for the Wallpaper Industry. Create intelligent solutions.
Advanced Technology for the Wallpaper Industry Create intelligent solutions. Highest Quality for an Optimum Efficiency. You want to know more: www.olbrich.com/wallcoverings Wallpaper Industry Advanced
More informationTITGEMEYER Tb1671GB(0917)1. n TIOS hand tools
TITGEMEYER Tb1671GB(0917)1 n TIOS hand tools All rights reserved. All technical data, performance descriptions, recommendations and guidelines contained in this catalogue and relating e.g. to the installation
More informationSTEINBICHLER 25 YEARS OF INSPIRING INNOVATION ABIS OPTICAL SURFACE INSPECTION
STEINBICHLER ABIS OPTICAL SURFACE INSPECTION 25 YEARS OF INSPIRING INNOVATION 25 YEARS OF INSPIRING INNOVATION EXPERTISE AND EXPERIENCE IN OPTICAL 3D MEASUREMENT TECHNOLOGY 25 years of experience and expertise
More informationDOWEL & TAPER PINS. made by GREMAKO.
DOWEL & TAPER PINS made by GREMAKO. INHALTSVERZEICHNIS Sonja Vollmert CEO Andreas Vollmert CEO» We create lasting connections of the highest quality. Made by GREMAKO - 100% made in Germany «THERE S RUN
More informationShaftGrind S. Key data. Compact and extremely versatile. A member of the UNITED GRINDING Group
A member of the UNITED GRINDING Group Compact and extremely versatile Key data The allows you to grind shaft-type workpieces with a length of up to 650 mm. This small, versatile grinding machine guarantees
More informationFONG S EUROPE GMBH. A Chinese name with German roots: Our headquarters in Schwäbisch Hall is the living proof of a successful globalization.
FONG S EUROPE GMBH A Chinese name with German roots: Our headquarters in Schwäbisch Hall is the living proof of a successful globalization. Traditional European brands such as GOLLER, THEN or XORELLA joint
More informationINDUSTRIAL IMAGE PROCESSING BUCHANAN
INDUSTRIAL IMAGE PROCESSING BUCHANAN Industrial Image Processing Image processing is an important efficiency factor in industrial production, whether to support handling processes, the quality control
More information// ipq-spectral Precise color measurement during the printing process. Be inspired. Move forward.
// ipq-spectral Precise color measurement during the printing process. Be inspired. Move forward. FULLY AUTOMATED IN-LINE MEASUREMENT FOR COLOR QUALITY RIGHT FROM THE START OF THE PRINTING JOB. Competition
More informationPress release II / 2017 Dresdner scientists print tomorrow s world
Press release II / 2017 Dresdner scientists print tomorrow s world The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden
More informationTECHNOLOGY SOLUTIONS FOR AUTOMOTIVE INTERIORS.
TECHNOLOGY SOLUTIONS FOR AUTOMOTIVE INTERIORS. HISTORY Hannes Auer founded GmbH in Oberaudorf, Germany, in 1998. The company produces innovative tooling and equipment technologies for manufacturing automotive
More information