Dipl.-Ing. Armin Kueck. Research Engineer. Baker Hughes, a GE company Baker-Hughes-Straße Celle

Transcription

1 Dipl.-Ing. Armin Kueck Tel.: Armin Kueck holds a diploma degree in mechanical engineering from the Technische Universität Braunschweig, Germany, and the Université de Technolgie Compiègne, France. He is working as a research engineer at Baker Hughes, a GE Company. He has authored multiple scientific papers and focuses his research on drillstring and reamer dynamics, data evaluation, life-time prediction and modeling and simulation of mechanical systems. - Kueck, A., Herbig, C., Reckmann, H., Ostermeyer, G.-P., Hohl, A.: Optimal storage of load data for lifetime prediction of drilling tools, DGMK-Frühjahrstagung, Celle Herbig, C., Heinisch, D., Hohl, A., Kueck, A., Mantle, S., Reckmann, H., "Benefits of Big Data Usage in the Daily Drilling Business", 2017 IADC World Drilling - Kueck, A., Ostermeyer, G.-P.: Automated Identification of Drill String Vibrations of a Scaled Rig. Celle Drilling Kueck, A., Hohl,A., Reckmann,H., Ostermeyer, G.-P.: Automated Generation of Minimal Models for Drill String Dynamics. OIL GAS-EUROPEAN MAGAZINE 42.1 (2016) : Kueck, A., Recke, B., Ostermeyer, G.-P.: Reduction of non-linear drill string models using proper orthogonal decomposition, PAMM Volume 14, Issue 1, pages , December 2014, DOI: /pamm Dr.-Ing. Bernhard Meyer-Heye Manager Design Reliability Bernhard.Meyer-Heye@bhge.com Tel.: Bernhard Meyer-Heye holds a Ph.D. in mechanical engineering from the Technische Universität Braunschweig. Today he is leading the Design Reliability within Drilling Services for Baker Hughes, a GE company. Reckmann, H.; Meyer-Heye, B.; Herbig, C.: Steps and Methods to Drive Reliability and Performance of Drilling Systems. OIL GAS European Magazine 1/2015, 2015

2 M.Sc. Mohamed Ichaoui TU Braunschweig Institute of Dynamics and Vibrations Schleinitzstraße Braunschweig Tel.: Mohamed Ichaoui obtained the master degree in mechanical engineering from the Technische Universität Braunschweig, Germany in He is working towards a Ph.D. since 2016 at the same university at the Institute of Dynamics and Vibrations. His main research intrests are in the dynamics and control of drilling systems. - Hohl,A., Tergeist,M., Oueslati,H., Herbig,C., Ichaoui M.,Ostermeyer,G.-P., Reckmann,H.:Model-Based Optimization Approach for Mitigation of Torsional Oscillations in Drilling Systems. OIL GAS European Magazine, 42, 37-38, Tergeist, M., Ichaoui,M., Hohl,A., Reckmann,H.Ostermeyer,G.-P.:Particle Based Evaluation of Rock Deformation in Stabilizer-Wall Contact for Drilling Dynamics, OIL GAS European Magazine,43,18-19,2017 Dipl.-Ing. B.Sc. Christian Herbig Christian.Herbig@bhge.com Tel.: Christian Herbig has a Diploma in mechanical engineering from the Leibniz University of Hannover and a Bachelor in business informatics from University Hagen. He is working as a Research and Development Engineer at Baker Hughes since He has authored and co-authored several research papers and patent applications about drilling performance, dynamics and modelling. - Kueck, A.; Herbig, C.; Hohl, A.; Reckmann, H., Ostermeyer, G.-P.: Optimale Speicherung von Lastdaten zur Lebensdauervorhersage von Bohrwerkzeugen, DGMK Frühjahrstagung Hohl, A., Hohl, C., Herbig, C., Oueslati, H., & Reckmann, H. Characterization and Mitigation of Mud Motor Vibrations. In SPE/IADC Drilling Conference and Exhibition. Society of Petroleum Engineers., Hohl, A., Heinisch, D., Oueslati, H., Herbig, C., & Reckmann, H.. Development of an efficient Vibration Modeling Technique for Design-Related Optimization of Tools in the Global Drilling Environment. In SPE Middle East Oil & Gas Show and Conference. Society of Petroleum Engineers, 2017

3 - Herbig, C., Linke, C., Reckmann, H., Hohl, A., Heinisch, D., Boyd, A.,... & Murphy, S.: Reaming and Drilling Practice Optimization using Modeling and Simulation Techniques. In SPE Deepwater Drilling and Completions Conference. Society of Petroleum Engineers, Hohl, A., Tergeist, M., Oueslati, H., Herbig, C., Ichaoui, M., Ostermeyer, G. P., & Reckmann, H.. Prediction and Mitigation of Torsional Vibrations in Drilling Systems. In IADC/SPE Drilling Conference and Exhibition. Society of Petroleum Engineers, Hohl, A.; Herbig, C.; Ichaoui, M.; Oueslati, H.; Reckmann, H.; Tergeist, M.; Ostermeyer, G.-P.: Model-based optimization approach to predict and mitigate torsional oscillations in drilling systems, Celle Drilling Heinisch, D.; Herbig, C.; Meyer-Heye, B.; Reckmann, H.: Shock Loads on Drilling Tools, Celle Drilling Herbig, C., Oueslati, H., Hohl, A., Reckmann, H., Heinisch, D., Pessier, R.,... & Gozzi, D. S. (2015, March). Drillpipe Influence on Drilling Performance. In SPE/IADC Drilling Conference and Exhibition. Society of Petroleum Engineers. - Reckmann, H., Meyer-Heye, B., & Herbig, C. (2015). Steps and Methods to Drive Reliability and Performance of Drilling Systems. OIL GAS-EUROPEAN MAGAZINE, 41(1), Herbig, C., Hohl, A., Oueslati, H., Reckmann, H., Heuermann-Kühn, L., Baumann, J., & Heinisch, D. (2015). Data-driven drilling optimization: Using historical data to improve future performance. OIL GAS-EUROPEAN MAGAZINE, 41(1), Oueslati, H., Hohl, A., Makkar, N., Schwefe, T., & Herbig, C. (2014, March). The need for high frequency vibration measurement along with dynamics modeling to understand the genesis of PDC bit damage. In IADC/SPE Drilling Conference and Exhibition. Society of Petroleum Engineers. Dr.-Ing. Dipl.-Oek. Andreas Hohl Project Manager, Product Development Andreas.Hohl@bhge.com Tel.: Andreas Hohl has a Doctor s degree in mechanical engineering and a Diploma in business sciences from the Leibniz University of Hannover. He has work experience in the turbine and oil industry and has authored several research papers and patent applications. He is currently working as a Research and Development Engineer at Baker Hughes. - HOHL, A., et al. Investigation of lateral & torsional vibrations of drillstrings based on simulations, laboratory modal analysis and field tests. OIL GAS-EUROPEAN MAGAZINE, 2014, 40. Jg., Nr. 1, S HOHL, Andreas, et al. Derivation and experimental validation of an analytical criterion for the identification of self-excited modes in drilling systems. Journal of Sound and Vibration, 2015, 342. Jg., S HOHL, Andreas; HOHL, Carsten; HERBIG, Christian. A Combined Analytical and Numerical Approach to Analyze Mud Motor Excited Vibrations in Drilling Systems. In: ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, S. V009T24A004-V009T24A HOHL, A., et al. Model-Based Optimization Approach for Mitigation of Torsional Oscillations in Drilling Systems. OIL GAS-EUROPEAN MAGAZINE, 2016, 42. Jg., Nr. 1, S HOHL, Andreas, et al. Prediction and Mitigation of Torsional Vibrations in Drilling Systems. In: IADC/SPE Drilling Conference and Exhibition. Society of Petroleum Engineers, 2016.

4 - HOHL, Andreas, et al. Development of an efficient Vibration Modeling Technique for Design- Related Optimization of Tools in the Global Drilling Environment. In: SPE Middle East Oil & Gas Show and Conference. Society of Petroleum Engineers, HOHL, Andreas, et al. Characterization and Mitigation of Mud Motor Vibrations. In: SPE/IADC Drilling Conference and Exhibition. Society of Petroleum Engineers, HOHL, Andreas, et al. Development of an efficient Vibration Modeling Technique for Design- Related Optimization of Tools in the Global Drilling Environment. In: SPE Middle East Oil & Gas Show and Conference. Society of Petroleum Engineers, OUESLATI, Hatem, et al. The need for high frequency vibration measurement along with dynamics modeling to understand the genesis of PDC bit damage. In: IADC/SPE Drilling Conference and Exhibition. Society of Petroleum Engineers, JAIN, Jayesh R., et al. High-Frequency Torsional Dynamics of Drilling Systems: An Analysis of the Bit-System Interaction. In: IADC/SPE Drilling Conference and Exhibition. Society of Petroleum Engineers, HERBIG, Christian, et al. Reaming and Drilling Practice Optimization using Modeling and Simulation Techniques. In: SPE Deepwater Drilling and Completions Conference. Society of Petroleum Engineers, TERGEIST, M., et al. Particle Based Evaluation of Rock Deformation in Stabilizer-Wall Contact for Drilling Dynamics. OIL GAS-EUROPEAN MAGAZINE, 2017, 43. Jg., Nr. 1, S. OG18-OG20. - TERGEIST, M., et al. Modeling Rock Cutting Under Extreme Downhole Conditions. OIL GAS- EUROPEAN MAGAZINE, 2016, 42. Jg., Nr. 1, S KUECK, A., et al. Automated Generation of Minimal Models for Drill String Dynamics. OIL GAS-EUROPEAN MAGAZINE, 2016, 42. Jg., Nr. 1, S Prof. Dr.-Ing. habil. G.-P. Ostermeyer Head of Institute TU Braunschweig Institute of Dynamics and Vibrations Schleinitzstraße Braunschweig gp.ostermeyer@tu-braunschweig.de Tel.: Prof. Dr.-Ing. habil. G.-P. Ostermeyer is professor and head of the Institute of Dynamics and Vibrations at the Technische Universität Braunschweig in Germany since He started in 1987 as a senior researcher at Volkswagen AG, from 1992 to early 2000 he was professor for Mechanics and Friction Physics at the Technische Universität Berlin. Main research fields are drilling and reservoir dynamics, complex systems with friction, novel computational techniques and engineering science. 60+ publications, thereof: - Ostermeyer,G.-P.,Schiefer,F.,Raczek,S.,Bubser,F.,Hanne,C.:Innovative tribologische Untersuchungsmethoden für die Bohr-und Fördertechnik,DGMK/ÖGEW-Frühjahrstagung 2017,Celle,DGMK-Tagungsbericht ,ISBN Ostermeyer,G.-P.,Schiefer,F.,Bubser,F.,Hanne,C.: Hydoabrasion Test Stand, OIL GAS European Magazine,43,33-34, Ostermeyer,G.-P., Völpel,A., Müller,M.: A Method towards Investigating the Influence of ODE based Friction Laws in the Frequency Domain, Proceedings of Eurobrake 2016 Mailand,Paper EB 2016-FBR Ostermeyer,G.-P., Merlis,J.: Effective Simulation of the Boundary Layer of an Entire Brake Pad.No SAE Technical Paper, Ostermeyer,G.-P.,Wilkening,L.,Morbach,M.: Reib-und Grenzschichtdesign bei Bremsen. VDI Verkehrstechnik, VDI-Berichte 2241 (2015) pp

5 - Ostermeyer,G.-P., Raczek,S., Abendroth,H., Wernitz,B., Kölsch,C., Giese,A.: On the Correlation of Friction Behaviour and Brake Squeal,Proc.Eurobrake 2015 Dresden, EB2015- FMC Ostermeyer,G.-P., Schramm,T., Raczek,S., Bubser,F., Perzborn,N.: The Automated Universal Tribotester,Proc. Eurobrake 2015 Dresden, EB2015-STQ Ostermeyer,G.-P., Schiefer, F., Keisenberg,T.: Stabilitäts- und Schwingungsanalysen flüssigkeitsgefüllter Zuckerzentrifugen, Sugar Industry 140, No.6 (2015), P Ostermeyer, G.-P., Schiefer,F., Weibel,M., Voß,C.: Virtual Sugar Centrifuges as Resources for Prevention, XX World Congress on Safety and Health at Work 2014, Frankfurt, Germany - Ostermeyer, G.-P., Schiefer,F., Shi,M.: Reflections on Modeling and Simulation of Drill String Dynamics within gebo, OIL GAS European Magazine pp 16-18,1/ Ostermeyer, G.-P., Graf, M.: Influence of abrasive wear on thermoelastic in-stabilities in brakes, SAE International Journal of Materials & Manufacturing 7 (1), pp. 1-15, 2014 Dr.-Ing. Hanno Reckmann Manager Drilling Dynamics Hanno.Reckmann@bhge.com Tel.: Hanno Reckmann has a PhD degree in mechanical engineering from the Leibniz University of Hannover and is currently Manager of the Global Dynamics Group Baker Hughes. He has co-authored several research papers and patent applications. - H. Reckmann, Condition Monitoring and Life Prediction of Drilling Tools Based on Downhole Data, 2015 SPE Workshop From Sensors to Solutions, Galveston, Texas, USA, 1-3 September M. Tergeist, H. Reckmann, M. Neubert, G. Ostermeyer, Localizing the Excitation Source of High Frequency Torsional Oscillations, 2015 International Conference on Engineering Vibration (ICoEV), Ljubljana, Slowenia, 7-10 September, C. Herbig, A. Hohl, D. Heinisch, H. Reckmann, H. Oueslati, N. Silva, R. Pessier, C. Castilho, D. Gozzi, Drillpipe Influence on Drilling Performance, SPE , SPE/IADC Drilling Conference and Exhibition held in London, United Kingdom, 17à â â œ19 March H. Reckmann, B. Meyer-Heye, C. Herbig, Steps and Methods to Drive Reliability and Performance of Drilling Systems, European Oil and Gas Journal, 03/ C. Herbig, A. Hohl, D. Heinisch, H. Reckmann, H. Oueslati, J. Baumann, L. Heuermann- Kuehn, Data-Driven Drilling Optimization: Using Historical Data to Improve Future Performance, European Oil and Gas Journal, 03/ A. Hohl, C. Herbig, H. Reckmann, H. Oueslati, J. Jain, M. Tergeist, G. Ostermeyer, Derivation and experimental validation of an analytical criterion for the identification of self-excited modes in drilling systems, Journal of Sound and Vibration, Volume 342, 2015, Pages A. Hohl, C. Herbig, H. Reckmann, H. Oueslati, J. Jain, Investigation of Lateral and Torsional Vibrations of Drillstrings Based on Simulations, Laboratory Modal Analysis and Field Tests, European Oil and Gas Journal, 03/ J. Jayesh, L. Ledgerwood, H. Oueslati, H. Reckmann, M. Tergeist, On the Torsional Dynamics of Drilling Systems: An Analysis of the Bit-System Interaction, IADC/SPE Drilling Conference and Exhibition held in Fort Worth, Texas, USA, 4th March 2014