3D Printing. (and more) Nick Birbilis
|
|
|
- Louise Willis
- 5 years ago
- Views:
Transcription
1 3D Printing. (and more) Nick Birbilis
2 Where do I come from? It s a real pleasure to be here at Australian Mining and Energy I am fortunate to have what I believe is a bit of a fun talk, blending technology and context
3 The worlds quickest intro into 3D printing for the non 3D printer Polymers Metals Ceramics Composites
4 Relative cost The worlds quickest intro into 3D printing for the non 3D printer Polymers Metals Ceramics Composites 1k 100k 1M+ FDM Resin-based methods SLS Polyjet DLD SLM Being codeveloped by us in 2017 FDM with multiple extruders *ignoring non-printing fabrication methods
5 Fused deposition modelling
6 Polyjet
7 Polyjet
8 Composites Continuous, conformal Carbon fibre Glass fibre Kevlar
9 Direct laser deposition
10 Selective laser melting Woodside HX V3.2x (prototype) Think big Prototype small Upscale fast
11 OK. So now I am assuming all of us are 3D printing experts. Resources 2050: Technologies transforming the industry
12 Carried on >1600 media sites 3D printing can help reduce new engine development time from the current 20 years down to 3 years
13
14 + Alcoa transforming its business towards powder supply, etc.
15 SLM Printed Ti64
16 In the context of today..what is being done in the trenches? 3D printing of Stainless steel
17 No stone being left unturned. Nanoscale x-ray mapping 100nm
18 What does the future hold? Bespoke components Repair or dreamt up Deglobalisation Surety of component supply A workforce that can deliver them Plant of the future.. Anywhere, anytime, cost effectively Major Disruption Disruption from within is critical Collaboration Including cross industry
19 What does the future hold? Bespoke components Repair or dreamt up Deglobalisation Surety of component supply A workforce that can deliver them Plant of the future.. Anywhere, anytime, cost effectively Major Disruption Disruption from within is critical Collaboration Including cross industry
20 What does the future hold? Bespoke components Repair or dreamt up Deglobalisation Surety of component supply A workforce that can deliver them Plant of the future.. Anywhere, anytime, cost effectively Capabilities of the Australian steel industry to supply major projects in Australia Major Disruption Disruption from within is critical Collaboration Including cross industry Australia no longer produces stainless compiled by Ian Cairns - National Manager steel Industry Development on behalf of the Australian Steel Institute Version March 2010
21 What does the future hold? Bespoke components Repair or dreamt up Deglobalisation Surety of component supply A workforce that can deliver them Plant of the future.. Anywhere, anytime, cost effectively Major Disruption Disruption from within is critical Collaboration Including cross industry Disrupters! On secondment at Monash
22 What does the future hold? Bespoke components Repair or dreamt up Deglobalisation Surety of component supply A workforce that can deliver them Plant of the future.. Anywhere, anytime, cost effectively Major Disruption Disruption from within is critical Collaboration Including cross industry
23 What does the future hold? Bespoke components Repair or dreamt up Deglobalisation Surety of component supply A workforce that can deliver them Plant of the future.. Anywhere, anytime, cost effectively Major Disruption Disruption from within is critical Collaboration Including cross industry
24 A note to finish on with regards to collaboration
25
26 Thank You
Visual Imaging in the Electronic Age
Visual Imaging in the Electronic Age ART 2107, ARCH 3702, CS 1620, ENGRI 1620 3D Printing November 6, 2014 Prof. Donald P. Greenberg dpg5@cornell.edu Types of 3D Printers Selective deposition printers
Visual Imaging in the Electronic Age
Visual Imaging in the Electronic Age ART 2107, ARCH 3702, CS 1620, ENGRI 1620 3D Printing October 20, 2015 Prof. Donald P. Greenberg dpg5@cornell.edu Types of 3D Printers Selective deposition printers
Laura Lindsey West Professor of Sculpture Fresno City College
Laura Lindsey West Professor of Sculpture Fresno City College Create an original pattern and scan the image (L. West at ASU Prism lab) Create the image entirely on the computer (Rinus Roelofs) POINT SCANNER
CREATE PROJECT Edit Printer. Tutorial_V2 - Updated: 13,0600,1489,1629(SP6)
CREATE PROJECT Tutorial_V2 - Updated: 13,0600,1489,1629(SP6) In this exercise, we will learn how to edit the printer! Notice/ Remember Left mouse button name is "pick" Middle mouse button name is "Exit"
3D PRINTING AND DESIGN TECHNOLOGY, PROGRAMMING AND ROBOTICS
3D PRINTING AND DESIGN TECHNOLOGY, PROGRAMMING AND ROBOTICS INTRODUCTION What are we going to learn? How the designing process works 3D printing Uses Types Printing process Materials CAD Software Practical
3D Printing: Opportunities Abound. July 14, 2016
3D Printing: Opportunities Abound July 14, 2016 Agenda What is 3D printing? Technologies and Materials Market Players/Disruptors Applications Advantages and Take-aways 2 3D print Yoda, you will! 3 What
This document is downloaded from DR-NTU, Nanyang Technological University Library, Singapore.
This document is downloaded from DR-NTU, Nanyang Technological University Library, Singapore. Title The Disruptive Evolution Of 3D Printing Author(s) Citation Panda, Biranchi; Tan, Ming Jen; Gibson, Ian;
A customer requiring anonymity was able to procure the casting it needed at a lower cost and lead time than its previous fabrication.
Rapid Tooling Opens New Diecasting Doors Think diecasting tooling will ruin your lead times? Think again. North American Die Casting Association, Wheeling, Illinois Manufacturers seeking a competitive
3D Printing Technologies for Prototyping and Production
3D Printing Technologies for Prototyping and Production HOW TO LEVERAGE ADDITIVE MANUFACTURING TO BUILD BETTER PRODUCTS ADDITIVE MANUFACTURING CNC MACHINING INJECTION MOLDING Architects don t build without
A Review on 3d Printing
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X PP. 26-32 www.iosrjournals.org A Review on 3d Printing Anand Karpe 1, Prof. P.Z. Lokhande 2 Mechanical Department,
A violent debate: could guns be made at home by 3D printers?
University of Wollongong Research Online Faculty of Social Sciences - Papers Faculty of Social Sciences 2013 A violent debate: could guns be made at home by 3D printers? Thomas Birtchnell University of
3D PRINTING IS POISED TO CHANGE YOUR BUSINESS BUT HOW TO ADOPT IT IN YOUR OPERATIONS? MORE THEN TECHNOLOGY DEVELOPMENT
3D PRINTING IS POISED TO CHANGE YOUR BUSINESS BUT HOW TO ADOPT IT IN YOUR OPERATIONS? MORE THEN TECHNOLOGY DEVELOPMENT YA N G C H E N G, DEPA RT M ENT OF MAT E R I A L S A N D P R ODUCTION A A L B ORG
TEMPERATURE CONTROL OF CONTINUOUS CARBON FIBRE REINFORCED THERMOPLASTIC COMPOSITES BY 3D PRINTING
TEMPERATURE CONTROL OF CONTINUOUS CARBON FIBRE REINFORCED THERMOPLASTIC COMPOSITES BY 3D PRINTING Jing Pu 1, Peng Zhuo 2, Arthur Jones 3, Shuguang Li 4, Ian Ashcroft 5, Tao Yang 6, Kulsangcharoen Ponggorn
Design Analysis Process
Prototype Design Analysis Process Rapid Prototyping What is rapid prototyping? A process that generates physical objects directly from geometric data without traditional tools Rapid Prototyping What is
3D PRINTING IS POISED TO CHANGE YOUR BUSINESS: ARE YOU READY?
3D PRINTING IS POISED TO CHANGE YOUR BUSINESS: ARE YOU READY? YANG CHENG DEPARTMENT OF MATERIALS AND PRODUCTION AALBORG UNIVERSITY About myself Yang Cheng Education PhD in Operations Management from Center
The Additive Manufacturing Gold Rush. Dream or Reality?
The Additive Manufacturing Gold Rush Dream or Reality? Where s the Rush? Source: Gartner (July 2014) The Additive Manufacturing Gold Rush Tools of the Trade Additive Manufacturing (AM) Basics CAD Solid
Additive Manufacturing. amc.ati.org
Additive Manufacturing amc.ati.org Traditional Tooling 356-T6 lever casting for DSCR Wood pattern on matchboard Additive Manufacturing (AM) A new term but the technology is almost three decades old Formerly
Fluidic Factory Layer Offset Function
Fluidic Factory Layer Offset Function Use of layer offset function to print on top of COC transparent substrate Application Note Page Aim & Objectives 1 Introduction 1 Layer Offset Function (Case Study)
the state of 3D PRINTING
the state of 3D PRINTING The data you need to understand the 3D Printing world and build your 3D Printing strategy EDITION Table of contents Page 2 Introduction 3 Foreword 3 Survey Demographics 4 Key Takeaways
MISSISSIPPI POLYMER INSTITUTE: Real World Solutions to Your Technical Challenges
MISSISSIPPI POLYMER INSTITUTE: Real World Solutions to Your Technical Challenges MPI is an ISO/IEC 17025 accredited, full-service resource for polymer and material science-related industries. Established
Ink-Jet Three-dimensional Printing of Photopolymers: A Method of Producing Novel Composite Materials
Ink-Jet Three-dimensional Printing of Photopolymers: A Method of Producing Novel Composite Materials Eduardo Napadensky, Objet Geometries Ltd., Israel Current additive type manufacturing technologies such
TL2 Technology Developer User Guide
TL2 Technology Developer User Guide The Waveguide available for sale now is the TL2 and all references in this section are for this optic. Handling and care The TL2 Waveguide is a precision instrument
White paper. Exploring metal finishing methods for 3D-printed parts
01 Exploring metal finishing methods for 3D-printed parts 02 Overview Method tested Centrifugal disc Centrifugal barrel Media blasting Almost all metal parts whether forged, stamped, cast, machined or
Rapid Prototyping. Andy Fisher Faculty of Engineering and Applied Science Memorial University. Speaking of Engineering St. John s, February 19, 2009
Rapid Prototyping Andy Fisher Faculty of Engineering and Applied Science Memorial University it g St. John s, How do we make complex things? How do we make complex things? Traditionally Subtractive ti
Who we are. was born in 2006 as Spin-Off of Politecnico of Torino. Full time people employed 8. Laboratories and facilities 300 m 2
Who we are was born in 2006 as Spin-Off of Politecnico of Torino Full time people employed 8 Laboratories and facilities 300 m 2 Administration and offices 250 m 2 Consolidated Turnover more then 600k
Unlike machining or grinding, waterjet cutting does not produce any dust or particles that are harmful if inhaled.
We are K-Cut The Uk s leading Abrasive Waterjet Cutting Specialists Abrasive Water Jet Cutting is a sophisticated modern technique for cutting soft materials like paper through to the hardest substances
RPT/RT BUDAPEST UNIVERSITY OF TECHNOLOGY AND ECONOMICS FACULTY OF MECHANICAL ENGINEERING DEPARTMENT OF POLYMER ENGINEERING
B4 BUDAPEST UNIVERSITY OF TECHNOLOGY AND ECONOMICS FACULTY OF MECHANICAL ENGINEERING DEPARTMENT OF POLYMER ENGINEERING RPT/RT SMALL SERIES MANUFACTURING OF POLYMER PRODUCTS HTTP://WWW.PT.BME.HU LOCATION
International Journal of Advance Engineering and Research Development. 3D Printing for Different Casting Patterns
Scientific Journal of Impact Factor (SJIF): 4.72 International Journal of Advance Engineering and Research Development Volume 4, Issue 8, August -2017 3D Printing for Different Casting Patterns B.Lakshmisai
Making business with E-printing
Making business with E-printing Erik Teunissen BERENSCHOT 1 SRWC Abstract The transfer of new technologies to the market consumes more time and effort than we think off. The main issues to be successful
3D Printing Processes and Printing Materials
3D Printing Processes and Printing Materials Introduction to 3D Printing Three-dimensional (3D) printing in recent years has become the main focus of public and media attention as a technology has at last
To Printing The World. R4- - Public Additive International conference René van der Meer Océ R&D
From The World Of Print To Printing The World R4- - Public Additive International conference René van der Meer Océ R&D The world of imaging is changing radically. We know, because we are the ones changing
DESIGN ELEMENTS INDEX MEDALLIONS 4-5 MONUMENTAL 8-9 CUSTOM TECHNICAL PAGE COLORS SHADOW MOUNT MEMORIAL SIGNS DEDICATION SITE SPECIFIC
INDEX DESIGN ELEMENTS I N S T O N E A N D PAGE MEDALLIONS M E T A L 4-5 stone metal COLORS GRILLES 6-7 stone metal colors SHADOW MOUNT MONUMENTAL 8-9 PUBLIC ART MEMORIAL SIGNAGE 10-11 SIGNS ABOUT US SEALS
LASER CUTTING, ROBOTIZED BENDING AND WELDING. Med Matrix, a reliable partner ready for any challenge! HIGH PRECISION METAL SHEET PROCESSING
www.med-matrix.com HIGH PRECISION METAL SHEET PROCESSING LASER CUTTING, ROBOTIZED BENDING AND WELDING Our first aim has always been to offer the highest quality and the best service. Med Matrix, a reliable
ADVANTAGE. Insight Creating Advantage
THE ADVANTAGE Insight Creating Advantage Lucideon is a unique business that creates and delivers game-changing materials technologies and processes to allow you, our clients, to make step-change gains
1.8.3 Haptic-Based CAD 1.9 About this Book 1.10 Exercises References Development of Additive Manufacturing Technology
Contents 1 Introduction and Basic Principles 1 1.1 What Is Additive Manufacturing? 1 1.2 What Are AM Parts Used for? 3 1.3 The Generic AM Process 4 1.3.1 Step 1: CAD 4 1.3.2 Step 2: Conversion to STL 4
THE PROBLEM OF CORRECT TECHNOLOGY SELECTION IN RAPID PROTOTYPING Arkadiusz Rzucidło, Grzegorz Budzik, Łukasz Przeszłowski
Transactions on Business and Engineering Intelligent Applications 117 THE PROBLEM OF CORRECT TECHNOLOGY SELECTION IN RAPID PROTOTYPING Arkadiusz Rzucidło, Grzegorz Budzik, Łukasz Przeszłowski Abstract:
Uses Fabrications Decoration Signage Artwork Glass alternative
Acrylic A very popular sheet plastic often sold under the trade name Perspex in a variety of colours and finishes such as opaque, clear and translucent. Tough, versatile and available in many thicknesses,
3D PRINTER MATERIALS GUIDE
3D PRINTER MATERIALS GUIDE The two primary technologies used for desktop 3D printing are fused deposition modeling () and stereolithography (). For those new to 3D printing, technology feeds melted plastic
World-class metal fabrication solutions
World-class metal fabrication solutions Mining Industrial Commercial FIND OUT MORE AT WWW.WESTERNMETALWORX.COM.AU FABRICATING SOLUTIONS FOR CHALLENGING PROJECTS Western Metalworx provide world-class metal
THE OPPORTUNITY SPACE OF 3D PRINT IN THE MARITIME INDUSTRY
THE OPPORTUNITY SPACE OF 3D PRINT IN THE MARITIME INDUSTRY CONTENTS Introduction..3 What is 3D print and additive manufacturing? and why is it so important?....4 How does it work?....5 Common Technologies...5
APPLICATION OF ADDITIVE TECHNOLOGY IN FOOTWEAR DESIGN
APPLICATION OF ADDITIVE TECHNOLOGY IN FOOTWEAR DESIGN Suzana KUTNJAK-MRAVLINČIĆ, Sandra BISCHOF and Ana SUTLOVIĆ University of Zagreb Faculty of Textile Technology Prilaz baruna Filipovica 28a 10 000 Zagreb
Precision Prototyping THE ROLE OF 3D PRINTED MOLDS IN THE INJECTION MOLDING INDUSTRY
By Lior Zonder, Applications Team Leader & Nadav Sella, Solutions Sales Manager, Global Field Operations INTRODUCTION Injection molding (IM) the process of injecting plastic material into a mold cavity
PRECISION PROTOTYPING:
PRECISION PROTOTYPING: THE ROLE OF 3D PRINTED MOLDS IN THE INJECTION MOLDING INDUSTRY By Lior Zonder, Applications Team Leader Nadav Sella, Solutions Sales Manager, Global Field Operations INTRODUCTION
The Impact of 3D Printing on Industrial Manufacturing
Powered By The Impact of 3D Printing on Industrial Manufacturing Moderator David Wagman Editorial Director, Engineering360 Producer, Jonathan Fuller Sponsored by: Housekeeping 3 Using the Webinar console
PRECISION PROTOTYPING THE ROLE OF 3D PRINTED MOLDS IN THE INJECTION MOLDING INDUSTRY
PRECISION PROTOTYPING THE ROLE OF 3D PRINTED MOLDS IN THE INJECTION MOLDING INDUSTRY By Lior Zonder & Nadav Sella INTRODUCTION Injection molding (IM) the process of injecting plastic material into a mold
PROCEEDINGS OF SPIE. Opportunities and challenges for 3D printing of solid-state lighting systems
PROCEEDINGS OF SPIE SPIEDigitalLibrary.org/conference-proceedings-of-spie Opportunities and challenges for 3D printing of solid-state lighting systems Nadarajah Narendran Indika U. Perera Xi Mou Dinusha
AMRC Design & Prototyping Group Capability directory
AMRC Design & Prototyping Group Capability directory The AMRC Design & Prototyping Group undertakes high-risk research to develop novel products, machinery and equipment to help UK manufacturers deliver
When Bob Swartz first saw a 3D printer
Contract manufacturing profile 3D carbon fiber composite parts made from Impossible Objects CBAM process. Impossible Objects Become Possible with New 3D Process Northbrook, IL-based 3D printing company
Fieldlab Multi-material 3D Printing 3D printed structural electronics at TNO AMSYSTEMS Center
Fieldlab Multi-material 3D Printing 3D printed structural electronics at TNO AMSYSTEMS Center Dr. Wijnand Germs wijnand.germs@tno.nl 3DP STRUCTURAL ELECTRONICS DEMO STATUS TODAY 3DP STRUCTURAL ELECTRONICS
DESIGN PRODUCT 3D SCANNING
DESIGN PRODUCT ENGINEERING 3D SCANNING INSPECTION PLASTIC ADDITIVE MANUFACTURING 3D PRINTING METAL ADDITIVE MANUFACTURING TOOLING / INJECTION MOLDING THERMOPLASTIC We are the leading company in France
Design technology Standard level Paper 1
Design technology Standard level Paper 1 Monday 14 November 2016 (morning) 45 minutes Instructions to candidates Do not open this examination paper until instructed to do so. Answer all the questions.
Recent Architectural Engineering Projects Using Rapid Prototyping
Session 2406 Recent Architectural Engineering Projects Using Rapid Prototyping Abstract Michael McGeen, AIA Milwaukee School of Engineering In today s construction industry, with the introduction of new
The third dimension. This article is supported by...
The Wild Format guides are intended to expand awareness and understanding of the craziness that can be created on wide format digital printing devices, from floors to lampshades and everything in between.
CHAPTER 3 MATERIALS AND METHODS
35 CHAPTER 3 MATERIALS AND METHODS 3.1 INTRODUCTION Electrically conducting and/or ferromagnetic materials in combination with fibres and textiles are proven to be effective in shielding against electromagnetic
The Laser Processing of Diamond and Sapphire
The Laser Processing of Diamond and Sapphire Neil Sykes Micronanics Limited neil@micronanics.com Diamond Diamond has the highest hardness and thermal conductivity of any bulk material 10/10 on the Mohs
Wednesday, February 27, 13. LUNAR 3D PRINTING Launch Less by Launching More Dan Nevius -
LUNAR 3D PRINTING Launch Less by Launching More Dan Nevius - danielnevius@gmail.com lunar 3d printing motivation the space game why we don t live on the moon (yet) what is 3d printing adapting for the
Thinking ahead the Future. of Additive Manufacturing: Research Landscape, Opportunities and Barriers
Thinking ahead the Future of Additive Manufacturing: Research Landscape, Opportunities and Barriers Analysing Future Commercial Opportunities For 3D Printing And Examining Trends In Additive Manufacturing
UNIT T15: RAPID PROTOTYPING TECHNOLOGIES. Technologies
Unit T15: Rapid Prototyping Technologies Unit code: R/503/7413 QCF level: 6 Credit value: 15 Aim This unit aims to develop learners understanding of rapid prototyping through the study of their evolution,
High Value Manufacturing Catapult
High Value Manufacturing Catapult Dr Daniel Thompson Senior Technology Officer @ National Composites Centre HVM Catapult Presentation 11 February 2016 UK Manufacturing the Facts The global manufacturing
"Material fields per se" such as polymer materials or compositions and kind of fibrous web.
D06N WALL, FLOOR OR LIKE COVERING MATERIALS, e.g. LINOLEUM, OILCLOTH, ARTIFICIAL LEATHER, ROOFING FELT, CONSISTING OF A FIBROUS WEB COATED WITH A LAYER OF MACROMOLECULAR MATERIAL; FLEXIBLE SHEET MATERIAL
Global Subsea University Alliance: Subsea education and research programs. Prof Brian Evans Curtin University, Perth Australia
Global Subsea University Alliance: Subsea education and research programs Prof Brian Evans Curtin University, Perth Australia Subsea GSUA Alliance Showcase, 9 February 2018 Global Subsea University Alliance
Advanced Manufacturing Laboratory to Enhance STEM Learning
2017 ASEE Mid Atlantic Section Spring Conference: Morgan State University, Baltimore, Maryland Apr 7 Paper ID #20824 Advanced Manufacturing Laboratory to Enhance STEM Learning Dr. Kee M Park, Queensborough
Horizon 2020 Project: FENIX (No: ) Type of action: RIA. To be supplied to I3DU
Horizon 2020 Project: FENIX (No: 760792) Type of action: RIA Tender for the Provision of Services concerning the development of advanced filaments and materials for 3D printing processes with the use of
Innovation and Entrepreneurship in Engineering Education. Prof. KC Chan Head Department of Industrial and Systems Engineering
Innovation and Entrepreneurship in Engineering Education Prof. KC Chan Head Department of Industrial and Systems Engineering The T.I.E. Innovation drives technology growth Entrepreneurship consummates
Prototyping Services
Prototyping Services Introduction Our prototyping and process development team provides fabrication services for all composite related parts. We specialize in custom shaping by machine or hand and can
Design and Technology Resistant materials Key words and definitions
Design and Technology Resistant materials Key words and definitions Word Acrylic Definition a type of thermoplastic, which is hard and can be transparent. Used to make shop signs. Perspex is a trade/brand
MANUFACTURED FIBRE TECHNOLOGY
MANUFACTURED FIBRE TECHNOLOGY PDF File: Manufactured Fibre Technology 1 RELATED BOOK : Rayon textile fibre Britannica com Rayon, artificial textile material composed of regenerated and purified cellulose
The Brand you Trust with a Brand New Look
ABC professional steel wool The Brand you Trust with a Brand New Look Since 1929 Jex and ABC Steel Wool have been synonymous with quality steel wool products throughout Australia. Now a division of Edco
PI: Rhoads. ERRoS: Energetic and Reactive Robotic Swarms
ERRoS: Energetic and Reactive Robotic Swarms 1 1 Introduction and Background As articulated in a recent presentation by the Deputy Assistant Secretary of the Army for Research and Technology, the future
E TREMEFLAP FLAP WHEELS
E TREMEFLAP REFERENCE & APPLICATION GUIDE Flap Wheels EASY WAYS TO PLACE AN ORDER Phone: 905 282 1313 Fax: 905 282 1313 e-mail: sales@extremeabrasivesl.com Over the Web: (coming soon) EXTREME ABRASIVES
Effect of deposition speed on the flatness and cylindricity of parts produced by three dimensional printing process
Journal of Physics: Conference Series PAPER OPEN ACCESS Effect of deposition speed on the flatness and cylindricity of parts produced by three dimensional printing process To cite this article: Muhammad
Rapid Prototyping: An Explorative Study on Its Viability in Pottery Production (Sub-Theme:17)
Rapid Prototyping: An Explorative Study on Its Viability in Pottery Production (Sub-Theme:17) Ab. Aziz Shuaib (aziz@umk.edu.my) Faculty of creative Technology and Heritage, University Malaysia Kelantan
A Study of Applications of 3D printing technology and potential applications in the plastic thermoforming industry
IOSR Journal of Engineering (IOSRJEN) ISSN (e): 2250-3021, ISSN (p): 2278-8719 Vol. 07, Issue 08 (August. 2017), V1 PP 16-22 www.iosrjen.org A Study of Applications of 3D printing technology and potential
Contents. Additive Manufacturing: Global trends and South African opportunities
Contents Additive Manufacturing: Global trends and South African opportunities 2017 Additive manufacturing (AM) is defined by ASTM as the "process of joining materials to make objects from 3D model data,
: APPLICATION OF RAPID PROTOTYPING FOR ENGINEERING DESIGN PROJECTS
2006-2317: APPLICATION OF RAPID PROTOTYPING FOR ENGINEERING DESIGN PROJECTS Jorge Rodriguez, Western Michigan University Jorge Rodriguez is an Associate Professor in the Department of Industrial and Manufacturing
The Leading Program for Innovation of Manufacturing in Japan
German-Japanese Economic Forum at Hannover Messe (April.15 th, 2015) The Leading Program for Innovation of Manufacturing in Japan - The project outline of SIP: Innovative /Manufacturing Technologies -
RESEARCH & DEVELOPMENT Dr. Mohsen Mohammadi PO Box 4400, 15 Dineen Drive Fredericton, New Brunswick Canada E3B 5A3 506)
RESEARCH & DEVELOPMENT Dr. Mohsen Mohammadi PO Box 4400, 15 Dineen Drive Fredericton, New Brunswick Canada E3B 5A3 506) 458-7104 mmohamm2@unb.ca COMMERCIALIZATION Dr. Craig Murphy 300 Union Street Saint
Autonomous Self-Extending Machines for Accelerating Space Exploration
Autonomous Self-Extending Machines for Accelerating Space Exploration NIAC CP 01-02 Phase I Hod Lipson, Evan Malone Cornell University Computational Motivation Robotic exploration has a long cycle time
A-level DESIGN AND TECHNOLOGY (PRODUCT DESIGN)
SPECIMEN MATERIAL A-level DESIGN AND TECHNOLOGY (PRODUCT DESIGN) Paper 1 Technical Principles Specimen 2016 Morning Time allowed: 2 hours 30 minutes Materials For this paper you must have: Normal writing
ADDING VALUE TO YOUR BUSINESS
Developed by experts made for tooling Uddeholm AM Corrax ADDING VALUE TO YOUR BUSINESS #1 IN HIGH PERFORMANCE TOOL STEEL With pioneering research and development, innovative thinking and deep commitment,
ADDITIVE MANUFACTURING (3D PRINTING)
ADDITIVE MANUFACTURING (3D PRINTING) AND ITS USE IN ALLIED HEALTH PROFESSIONS BRADFORD GILDON ASSISTANT PROFESSOR DEPT. OF MEDICAL IMAGING AND RADIATION SCIENCES WHAT IS ADDITIVE MANUFACTURING? Rapid prototyping
An Introduction to Vacuum Casting and the High Performance of Nylon (PA6) It takes just 1 day to complete a silicone mold
An Introduction to Vacuum Casting and the High Performance of Nylon (PA6) ~Technical collaboration with SLM Solutions (Germany)~ Process Overview Our nylon casting aims at delivering high quality parts
Introduction to Manufacturing Processes
Introduction to Manufacturing Processes Products and Manufacturing Product Creation Cycle Design Material Selection Process Selection Manufacture Inspection Feedback Typical product cost breakdown Manufacturing
DT MIND MAPS. Application. Information. Steps. Planning. Creativity Process. Analysis MIND MAPS NAME.
DT MIND MAPS Information Steps MIND MAPS Creativity Process Analysis DT Planning Application NAME. These mind maps are a visual thinking tool that helps structure information, helping to better analyse,
Polyjet technology applications for rapid tooling
DOI: 10.1051/ matecconf/20171120301 1 Polyjet technology applications for rapid tooling Razvan Udroiu *, and Ion Cristian Braga Transilvania University of Brasov, Department of Manufacturing Engineering,
Canaccord Genuity 37 th Annual Growth Conference
Canaccord Genuity 37 th Annual Growth Conference August 10, 2017 Jim McCarley Chief Executive Officer Brian Smith CFO & Treasurer Asia The Americas Europe 1 2017 ExOne Safe Harbor Statement These slides
ART. Art I 1/2 credit
ART Art I 9 th, 10 th, 11 th and 12 th This hands-on class is for students who want to learn more about Art and Design while working with a lot of different mediums (colored pencils, papier mache, clay,
PRESS RELEASE HENDZEL + HUNT // BESPOKE INTERIORS + EXPERIMENTAL FURNITURE/PRODUCT ^^^COLLECTORS ITEMS// THE INFAMOUS 2009 BUSINESS CARDS
Designers + makers 9 Gowlett road, Unit 4 Peckham, SE15 4HX, London www.hendzelandhunt.com tel. +44 (0)77 9129 3751 (Jan) +44 (0)78 3811 6118 (Oscar) +44 (0)20 7639 2277 (Studio) HENDZEL + HUNT // BESPOKE
[4168] - 34 Third Year B.Des. (Set Design) Light and Camera - II (Sem. - VI)
![[4168] - 34 Third Year B.Des. (Set Design) Light and Camera - II (Sem. - VI)](/thumbs/89/97851813.jpg "[4168] - 34 Third Year B.Des. (Set Design) Light and Camera - II (Sem. - VI)")
Total No. of Questions : 5] P621 [4168] - 1 Second Year B.Des (Product Design) ERGONOMICS - II 1) All questions are compulsory. 2) Figures to the right indicate the marks. 3) Elaborate with sketches wherever
IDC Innovators: Plastic-Based 3D Printing, 2018
IDC Innovators IDC Innovators: Plastic-Based 3D Printing, 2018 Tim Greene THIS IDC INNOVATORS EXCERPT FEATURES: RIZE IN THIS EXCERPT The content for this excerpt was taken directly from IDC Innovators:
TOWARDS A NEW TECHNO-AESTHETIC PARADIGM: EXPERIMENTS WITH PATTERN, TEXTURE AND COLOUR IN 3D-PRINTED WOOD-PLASTIC COMPOSITES
Solid Freeform Fabrication 2016: Proceedings of the 26th 27th Annual International Solid Freeform Fabrication Symposium An Additive Manufacturing Conference Reviewed Paper TOWARDS A NEW TECHNO-AESTHETIC
3D PRINTING ON TEXTILES: TESTING OF ADHESION
ABSTRACT 3D PRINTING ON TEXTILES: TESTING OF ADHESION Malengier B 1, Hertleer C 1, Cardon L 2, Van Langenhove L 1 (12 pt, bold) 1 Centre for Textile Science and Engineering, Department MaTCh, Ghent University,
Advances in Laser Micro-machining for Wafer Probing and Trimming
Advances in Laser Micro-machining for Wafer Probing and Trimming M.R.H. Knowles, A.I.Bell, G. Rutterford & A. Webb Oxford Lasers June 10, 2002 Oxford Lasers June 2002 1 Introduction to Laser Micro-machining
Emerging Subsea Networks
3D PRINTING SUBMERGED EQUIPMENT Adrian Jarvis (Huawei Marine Networks Co., Limited) Email: adrian.jarvis@globalmarinesystems.com Huawei Marine Networks, Co., Limited, c/o Global Marine Systems Ltd, Winsford
Current status and future prospects of laser stereolithography. Today s talk:
Current status and future prospects of laser Industrial application [26-1]#049 HAGIWARA, Tsuneo CMET Inc. E-mail: hagi@cmet.co.jp personal website: http://www.urban.ne.jp/home/hagi Today s talk: background
Sensor Fusion Enables Comprehensive Analysis of Laser Processing in Additive Manufacturing
MKS Instruments 1 of 6 Sensor Fusion Enables Comprehensive Analysis of Laser Processing in Additive Manufacturing By Kevin Kirkham, Senior Manager, Product Development, Ophir Sensor: "A device that detects
For personal use only
ASX ANNOUNCEMENT 24 March 2017 PRESENTATION AT MASTER INVESTOR SHOW IN LONDON Aurora Labs Limited (the Company ) (ASX: A3D) is pleased to provide the investor presentation being delivered by Managing Director,
Prototypes on demand? Peter Arras De Nayer instituut [Hogeschool voor Wetenschap en Kunst]
![Prototypes on demand? Peter Arras De Nayer instituut [Hogeschool voor Wetenschap en Kunst]](/thumbs/78/77202330.jpg "Prototypes on demand? Peter Arras De Nayer instituut [Hogeschool voor Wetenschap en Kunst]")
Prototypes on demand? Peter Arras De Nayer instituut [Hogeschool voor Wetenschap en Kunst] Pressure on time to market urges for new ways of faster prototyping. Key words: Rapid prototyping, rapid tooling,
Attractive wheelie bin enclosures...for inside & outside
120 The Malvern - 120L Wheelie Bin Enclosures - Stainless Steel Facia - Available in 4 waste streams - Tamper proof magnetic signage can be updated for events anytime 120L Without Rainhood 65kg 981mm 120L
Advanced Manufacturing in the Civil, Mechanical and Manufacturing Innovation (CMMI) Division
Advanced Manufacturing in the Civil, Mechanical and Manufacturing Innovation (CMMI) Division Research leading to transformative advances in manufacturing and building technologies, with emphases on efficiency,