DEPARTMENT OF MACHINE PARTS
|
|
- Hilary Bishop
- 5 years ago
- Views:
Transcription
1 STU, Faculty of Mechanical Engineering, Nám. slobody 17, Bratislava, Slovak Republic Annual Report 2004 Head of Department: Tel: Štefan Král, PhD., Professor (until August 31, 2004) Fax: Ladislav Gulan, PhD., Assoc. Professor (since September 1, 2004) I. STAFF Professors Juraj Bukoveczky, PhD., Prof. Professor in: Transport Machines and Equipments Research Topics: Reliability, Modular Design, Logistics Štedan Král, PhD., Prof. Research Topics: Gear Transmissions of the New Generation, Design of Machine Assemblies and their Parts Associate Professors: Jozef Antala, PhD., Assoc. Prof. Associate Professor in: Machine Parts and Mechanisms Research Topics: Gear transmissions, Technical documentation Ladislav Beleš, PhD., Assoc. Prof. (until August 31, 2004) Associate Professor in: Machine Parts and Mechanisms Research Topics: Mechanical transmissions, Design of machine assemblies and their parts Miroslav Bošanský, PhD., Assoc. Prof. Associate Professor in: Machine parts and mechanisms Research topics: Gear transmissions, Design of machine assemblies and their parts Jozef Čačko, Assoc. Prof., D.Sc. (since September 20, 2004 external employee) Associate Professor in: Applied mechanics Research Topics: Material fatigue, Deformation properties, Optimisation of dynamic systems Ladislav Gulan, PhD., Assoc. Prof. Associate Professor in: Machines and machineries for building, processing and agriculture Research Topics: Design methodology modular design of mobile working machines Miroslav Vereš, PhD., Assoc. Prof. Associate Professor in: Machine Parts and Mechanisms Research Topics: Mechanical transmissions, Optimisation, Design methodology of Elements from non-conventional materials 69
2 Annual Report 2004 Senior lecturers: 5 Research workers: 2 PhD. students: 6 Technical staff: 2 II. EQUIPMENT II. 1. Teaching and Research Laboratories - Laboratory of transmissions Diagnostics Centre - Tribology laboratory - Computer centre of the department with reference workshop of the CATIA system II.2 Special measuring instruments and computers - Experimental stations with open power flow for life tests of gear transmissions - 2 Niemann s (FZG) gearboxes (2 pieces) with possibility of grade regulation of load levels - Nieman s (FZG) gearbox with possibility of continuous change of load - Tribotester - Analyzer of slide friction ratio - Four ball device - Sensors and evaluation device of torque - Measurement and evaluation system for processing of service loads - Involute measurement device Zeiss III. TEACHING III.1 Undergraduate Study A) Faculty of Mechanical Engineering Machine Parts and Mechanisms I Š. Král, Introduction to Machine Engineering J. Antala, M. Nemčeková, I. Kožuch, J. Bukoveczky Engineering Graphics P. Slovák Design I Š. Král, M. Bošanský, J. Čačko Design II M. Vereš, M. Bošanský, 70
3 Annual Report 2004 J. Čačko Tribology M. Bošanský Transportation Technology* J. Bukoveczky Mobile Working Machines J. Bukoveczky Subject was assured by the department during 3 weeks B) Faculty of Architecture Study major: Design Designology in Design I M. Bošanský, M. Vereš Designology in Design II Š. Král C) Faculty of Civil Engineering Study major: Earth Buildings and Architecture Technology of Building Processes II J. Bukoveczky (Building Machines and Mechanisation) Subject was assured by the department during 3 weeks III.2 Graduate Study A) The 3 rd year of the 5-years continuous engineering study Machine Parts III project M. Vereš, (transitionl year) L. Beleš B) The 4 th and 5 th year of the 5- years continuous engineering study Study major: Machines and Equipments for Civil Engineering, Processing and Agriculture Steel Constructions J. Bukoveczky Term Project L. Gulan Earth Machines I. Mazurkievič Design Methodology of Building Machines M. Vereš Term Project I. Mazurkievič Logistics Fundamentals L. Gulan 71
4 Annual Report 2004 Road Machines I. Mazurkievič Machines for production of Building Elements L. Gulan Probabilistic Dimensioning J. Bukoveczky Diploma project J. Bukoveczky Controling Systems of Chosen Machine Types L. Gulan Lifts and Elevators I. Mazurkievič Diploma project th week J. Bukoveczky C) Engineering Study the 1 st year Study major: Machines and Equipments for Civil Engineering, Processing and Agriculture Computer Design M. Vereš Theory of Working Machines J. Bukovecky, L. Gulan Subject was assured also for study major of engineering study Transportation Technology III.3 Postgraduate Study Study major: Machine Parts and mechanisms Selected parts from mechanisms and machines Gear Systems, Drives and Transmissions Tribology Š. Král M. Vereš M. Bošanský Study major: Transportation Machines and Machineries. Specialisation Building and Agricultural Machines Service Strength and Life of Structures J. Bukoveczky Selected Parts from Design Theory of Transportation Technology I. Mazurkievič Mechanical and Hydraulic Drive Systems I. Mazurkievič IV. RESEARCH TARGETS - mechanical transmissions - shafts mountings - tribological and tribotechnical processes - application of composite materials in machines and machineries - problems of modular design of mobile working machines - problems of design, developmental and service character 72
5 Annual Report 2004 V. RESEARCH PROJECTS - International scientific-technical project MVTP-ZR 2000-RF/ČR/SR/1 Diagnostics of gear mechanisms (Štefan Král) - Project APVT Complex interactive computational system for design objectivisation of modules of working machines (Juraj Bukoveczky) - Project APVT Application of ecological and tribological principles in contemporary structures of drive and transmission systems (Miroslav Vereš, Štefan Král) - Project VEGA 1/0296/03 Ecological, tribological, dynamic and optimisation characteristics of developmental types of gear transmission of chosen structural nodes (Miroslav Bošanský, Štefan Král) - Makrofractographic Analysis of Fracture of a Crankshaft IBA, Ltd., Nové Zámky (J. Bukoveczky, L. Gulan, M. Mráz) - Strength Assessment of Chosen Components of the Bridge Košická for Doprastav, Inc. Bratislava (J. Bukoveczky, V. Chmelko) VI. COOPERATION VI.1 Cooperation in Slovakia - IBM Slovensko - WUSAM, Inc., Zvolen - JE Jaslovské Bohunice - WAY INDUSTRY, Inc., Krupina - SPP, Inc. - RAND Slovakia - DYTRON, Inc., Bratislava - DOPRASTAV, Inc. VI.2. International Cooperation - VŠB TU Ostrava, Czech Republic - VUT Brno, Czech Republic - Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje Zagreb, Croatia - Sveučilište u Rijeci, Tehnički fakultet Rijeka, Croatia - Tehnički fakultet, TU Rijeka, Croatia - IžGTU Iževsk, Russian Federation - SZE Győr, Hungary VI.3 International Scientific Program - International scientific-technical program International scientific and educational centre Gears and Transmissions VI.4. International Contracts - International contract with Izhevsk State Technical University in Izhevsk, Russia federation 73
6 Annual Report Contract about scientific and research cooperation between Faculty of Mechanical Engineering STU in Bratislava and Faculty of Mechanical Engineering and Ship Building in Zagreb - Contract about scientific and research cooperation between Faculty of Mechanical Engineering STU in Bratislava and Technical Faculty of University in Rijeka VI.5. Membership in Domestic Organisations and Societies - member of SASI (Š. Král) - member of the National Committee CIGR (L. Gulan) - member of the editorial board of the quaterly Výťahy (J. Bukoveczky, L. Gulan, I. Kožuch) - member of the Advisory Group for Mechanisation in Building Industry (L. Gulan) - member of the Working Group of the Accreditation Committee Ministry of Education SR (J. Bukoveczky) - member of the Group of Experts of the Association of Mechanical Engineering Industry of SR for Public Procurement (I. Mazurkievič) - member of the Specialist Committee for Intellectual Property (I. Mazurkievič) - member of the Scientific Technical Committee WUSAM, Inc. (I. Mazurkievič) - member of the Committee of the Agency for Support of Science and Technology Ministry of Education SR. (I. Mazurkievič) VI.6 Membership in International Organisations and Societies - member of the Editorial Board of Electronic Journal Hungarian Electronic Journal (J. Bukoveczky Head of the section Mechanical Engineering and Transportation, M. Vereš - member of the editorial board) - member of the Europäische Konferenz deutschsprechender Fördertechnikprofessoren (J. Bukoveczky) - member of the VEAB (J. Bukoveczky) - member of the editorial board GÉP (J. Bukoveczky) - member of the editorial board of the Engineering Review, Rijeka, Croatia (M. Vereš) - member of the IFToMM Gearing and Transmissions Technical Committee (Š. Král) - vice-editor in chief and member of the editorial board of the journal Gearings and Transmissions (Š. Král) VI.7 Foreign Visitors to the Department - prof. dr.sc. Božidar Križan - dean, Tehnički fakultet, TU Rijeka, Croatia (7 days) - prof. dr.sc. Vladimir Medica - Tehnički fakultet, TU Rijeka, Croatia (2 days) - prof. dr.sc. Gordana Marunić - Tehnički fakultet, TU Rijeka, Croatia (4 days) - doc. dipl.ing. Neven Lovren - Tehnički fakultet, TU Rijeka, Croatia (4 days) - dipl. ing. mgr. Marina Franulović - Tehnički fakultet, TU Rijeka, Croatia (4 days) - dipl.ing. Sanja Troha - Tehnički fakultet, TU Rijeka, Croatia (4 days) - dipl. ing. Robert Bašan - Tehnički fakultet, TU Rijeka, Chorvátsko, 4 days - dipl. ing. Kristina Buljanović - Tehnički fakultet, TU Rijeka, Croatia (4 days) - dipl. ing. Josipa Rubeša - Tehnički fakultet, TU Rijeka, Croatia (4 days) - prof. Ing. Zdenĕk Dejl, DrSc. - VŠB TU Ostrava, Czech Republic (1 day) - prof. Ing. Vladimír Moravec, CSc. - VŠB TU Ostrava, Czech Republic (1 day) - dipl. Ing. Georg Haindl Eurocopter Deutschland, GmbH, Donauwőrth, Germany (2 days) 74
7 Annual Report 2004 VI.8 Visits of Staff Members and Postgraduate Students to Foreign Institutions - Štefan Král - IFToMM Geraring TC, Miškolc, Hungary (1 day) - Štefan Král The 11 th World Congress in Mechanism and Machine Science, Tianjin, China (10 days) - Juraj Bukoveczky - BAUMA 2004, Munich, Germany (2 days) - Ladislav Gulan - BAUMA 2004, Munich, Germany (2 days) - Miroslav Vereš The 45 th International Conference of Departments of Machine Parts and Mechanisms, VUT Brno Blansko, Czech Republic (3 days) - Miroslav Bošanský The 45 th International Conference of Departments of Machine Parts and Mechanisms, VUT Brno Blansko, Czech Republic (3 days) - Juraj Bukoveczky The XV th European conference of material handling teaching professors, University of Novi Sad, Faculty of technical sciences, Serbian and Montenegro (5 days) - Pavol Slovák - PSA Paris, France (52 days) - Miroslav Bošanský - MSV Brno, Czech Republic (1 day) - Ladislav Beleš - MSV Brno, Czech Republic (1 day) - Ľudovít Jánošík - MSV Brno, Czech Republic (1 day) - Juraj Medzihradský - MSV Brno, Czech Republic (1 day) - Rastislav Majtán - MSV Brno, Czech Republic (1 day) - Marián Mráz - MSV Brno, Czech Republic (1 day) VII. Theses VII.1 Habilitation theses [1] Gulan, L.: Creation of Flexible Structures of Mobile Working Machines VII.2 Doctoral Theses (Supervisor s name is in brackets) [1] Jančo, R.: Modeling of Structural elements from Composite Materials used in Transportation Technology [2] Orokocký, R: Wear Resistance Increase of Gears in Interaction with Ecological Lubricants (M. Vereš) (M. Bošanský) VII.3 Diploma Theses Study Major: Machines and Machineries for Building, Processing and Agriculture (Supervisor s name is in brackets) [1] Bajcar, B.: Depth Digging Machinery for Loader LOCUST 1203 (I. Mazurkievič) [2] Dacej, R.: Working Platform as Attaching Machinery for Manipulator UTM (M. Michalíček) [3] Gál, M.: Digger Design for Loader of Power Category 60 kw - Digger Machinery and Chassiss Structure (I. Mazurkievič) [4] Huska, R.: Attaching Communal Machinery for Road Cleaning for Small Tractors up to Power 20 kw (M. Bošanský [5] Jánošík, Ľ.: Optimisation of Seat Frame of the Type Mistral PMS
8 Annual Report 2004 from the point of view of Fatigue Failure (J. Bukoveczky) [6] Jurča, R.: Cutting Equipment for Loader LOCUST 1203 (L. Gulan) [7] Matok, M.: Digger Design for Loader of Power Category 60 kw Loading Machine and Travel Drive (I. Mazurkievič) [8] Michalíček, M.: Telescopic Crane for Rescue Vehicle (M. Vereš) VIII. OTHER ACTIVITIES - Membership in program committees of conferences (Š. Král, J. Bukoveczky, M. Vereš) - Membership in Dissertation Committees in branches: Machine Parts and Mechanisms (Š. Král, M. Vereš, M. Bošanský, L. Beleš) Transportation Machines and Mechanisms (J. Bukoveczky, I. Mazurkievič) - Membership in State Committees: Bachelor study (J. Bukoveczky, Š. Král, M. Vereš, L. Gulan, M. Bošanský, L. Beleš, I. Mazurkievič, J. Antala) Master study (J. Bukoveczky, M. Vereš, L. Gulan, M. Bošanský, L. Beleš, I. Mazurkievič) - Membership in oponent committees, expert, review, opinions (J. Bukoveczky, M. Vereš, M. Bošanský, L. Gulan, J. Antala, Š. Král, I. Mazurkievič, I. Kožuch, M. Nemčeková) - Membership in Technical Standardisation Committees (J. Antala, L. Gulan, Š. Král, M. Vereš) - Cooperation in the project PSA (P. Slovák, J. Antala) - Preparing of courses of further education (Ľudmila Zajacová, I. Kožuch) - Participation in preparing of Accreditation Report - Presentation of Diploma Theses created in the system CATIA IX. PUBLICATIONS [1] Antala, J., Bajla, J., Barysz. I., Bronček, J., Čillík, L., Kacko, P., Klimo, V., Ľahučký, D., Rusnák, J., Veselovský, J.: Mechanical Engineering Charts, Choice of Standards. Issued by the Institute of Technical Standardisation Bratislava, Bratislava, 2004 (in Slovak) [2] Antala, J.: Possibilities of Influencing of the Process of Education in Design. Proceedings of the International Scientific Conference on the Occasion of the 11 th International Mechanical Fair in Nitra New Trends in Design and in Creation of Technical Documentation 2004, Nitra, May 2004, pp (in Slovak) [3] Bukoveczky, J., Gulan, L., Majtán, R., Mráz, M.: Interactive System Supporting Design of Cabins of Working Machines. Proceedings of the International Scientific Conference on the Occasion of the 11 th International Mechanical Fair in Nitra New Trends in Design and in Creation of Technical Documentation 2004, Nitra, May 2004, pp (in Slovak) [4] Bukoveczky, J., Gulan, L., Majtán, R., Mráz, M., Nogely, C.: Interactive System Supporting Design of Cabins of Working Machines. Proceedings of the XXX th International Seminary of the Departments and Institutes of Transport Building and Agricultural Machines, Herľany, September 2004 (in Slovak) [5] Gulan, L., Bukoveczky, J., Zajacová, Ľ.: Verification of Modularity Ratio on the Set of Mobile Working Machines. Proceedings of the XV th European conference of material handling teaching professors, Novi Sad, September 2004, pp
9 Annual Report 2004 [6] Gulan, L., Bukoveczky, J.: A Platform of Machine Assemblies. Proceedings of the XLV th Conference of Departments of Machine Parts, Brno Blansko, September 2004, pp (in Slovak) [7] Kožuch, I.: Influence of Axial Distance Change on Engagement of Modified K-K Gear. Proceedings of the XLV th Conference of Departments of Machine Parts, Brno, September 2004 (in Slovak) [8] Mazurkievič, I.: Optimisation of Drive of Turn. Proceedings of the XXX th International Seminary of the Departments and Institutes of Transport Building and Agricultural Machines, Herľany, September 2004 (in Slovak) [9] Nemčeková, M.: Computer Support of Life Cycle of Product. Proceedings of the XLV th Conference of Departments of Machine Parts, Brno, September 2004 (in Slovak) [10] Nemčeková, M.: PLM. Computer Support of Life Cycle of Product. Proceedings of the International Scientific Conference on the Occasion of the 11 th International Mechanical Fair in Nitra New Trends in Design and in Creation of Technical Documentation 2004, Nitra, May 2004, pp (in Slovak) [11] Opalić, M., Vereš, M., Žeželj, D.: Measurement line design. Proceedings of the XLV th Conference of Departments of Machine Parts, Brno, September 2004 [12] Orokocký, R., Bošanský, M., Vereš, M.: Possibilities of Use of Software AUTOCAD in Design of Profiles of Plane Gears. Proceedings of the International Scientific Conference on the Occasion of the 11 th International Mechanical Fair in Nitra New Trends in Design and in Creation of Technical Documentation 2004, Nitra, May 2004, pp (in Slovak) [13] Orokocký, R., Bošanský, M., Vereš, M.: Modification of Tooth Shape of K-K Gearing from the point of View of Production. Proceedings of the XLV th Conference of Departments of Machine Parts, Brno, September 2004, pp (in Slovak) [14] Tolnay, M., Magdolen, Ľ., Jaššo, P., Fibich, J.: Stress Analysis of Telescopic Covers in Machining Devices. In: Production Engineering, No.3, Vol. III, Košice, pp (in Slovak) [15] Vereš, M., Bošanský, M., Orokocký, R.: Strength and Reliability Computation of Anchoring of Aggregates in Concrete Bases. Proceedings of the International Scientific Conference on the Occasion of the 11 th International Mechanical Fair in Nitra New Trends in Design and in Creation of Technical Documentation 2004, Nitra, May 2004, pp (in Slovak) [16] Vereš, M., Opalič, M., Bošanský, M., Orokocký, R.: Anchoring of Aggregates in Concrete Bases with Special Bolts. Proceedings of the XLV th Conference of Departments of Machine Parts, Brno, September 2004, pp (in Slovak) Research reports [17] Bukoveczky, J., Gulan, L., Vereš, M., Zajacová, Ľ., Schmidtová, C., Majtán, R., Mráz, M., Nogely, C.: Project of Research and Development APVT Complex Interactive Computational System for Objectivisation of Design of Modules of Working Machines. Phase 03. Filling in of Database of Unified Modules and Aggregates of Machines. Interactive System Supporting Design of Modules of Mobile Working Machines. Faculty of Mechanical Engineering, STU in Bratislava, March 2004 [18] Bukoveczky, J., Gulan, L., Vereš, M., Zajacová, Ľ., Schmidtová, C.: Project of Research and Development APVT Complex Interactive Computational System for 77
10 Annual Report 2004 Objectivisation of Design of Modules of Working Machines. Phase 07. Filling.in of Database of Service Spectra of Service Load Conditions. Faculty of Mechanical Engineering, STU in Bratislava, June
DEPARTMENT OF MECHANICS
STU Faculty of Electrical Engineering and Information Technology, Bratislava Annual Report 2005 DEPARTMENT OF MECHANICS http://www.elf.stuba.sk/departments/kmech/kmech.html Head of Department Prof. Ing.
More informationSTU Faculty of Electrical Engineering and Information Technology, Bratislava DEPARTMENT OF MECHANICS
STU Faculty of Electrical Engineering and Information Technology, Bratislava DEPARTMENT OF MECHANICS http://aladin.elf.stuba.sk/katedry/kmech/ Head of Department Prof. Ing. Justín Murín, DrSc. Tel/Fax:
More informationFACULTY OF MECHANICAL ENGINEERING.
FACULTY OF MECHANICAL ENGINEERING www.sjf.tuke.sk History Establishment of the Košice University confirmed Emperor Leopold I. August 7, 1660 Golden Bull (Bulla Aurea) Governmental Decree No.30 / 1952 created
More informationResearch Center of Manufacturing Technology
Czech Technical University of Prague, Faculty of Mechanical Engineering g Horská 3, 128 00 Praha 2, tel.: +420 221 990 900, fax: +420 221 990 999 http://rcmt.cvut.cz RCMT Intro The Short Introduction of
More informationSurface Mining Machines
Surface Mining Machines Eugeniusz Rusiński Jerzy Czmochowski Przemysław Moczko Damian Pietrusiak Surface Mining Machines Problems of Maintenance and Modernization 123 Eugeniusz Rusiński Faculty of Mechanical
More informationInternational. September 29th October 3rd 2014 Brno, Czech Republic. 56 th International Engineering Fair
56 th International Engineering Fair Measuring, control, automation and regulation technology 1 International Engineering Fair September 29th October 3rd 2014 Brno, Czech Republic International Engineering
More informationDEPARTMENT OF ECONOMICS AND MARKETING
DEPARTMENT OF ECONOMICS AND MARKETING E-mail: kpikafeim@gmail.com Our department was founded in 1984. From the day of founding it is managed by Doctor of Economics, prof. Yakovlev Anatoliy Ivanovich. He
More informationDEVELOPMENT OF THE STU FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN 2012
DEVELOPMENT OF THE STU FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN 2012 The priorities for development in 2012 were as follows: The long-term plan of STU MTF development for the period 2012 2017, along
More informationThe presentation of the first-year Ph.D. students. Supervisor: doc. Ing. Martin Vrbka, Ph.D. Matúš Ranuša
The presentation of the first-year Ph.D. students Matúš Ranuša Supervisor: doc. Ing. Martin Vrbka, Ph.D. Institute of Machine and Industrial Design Faculty of Mechanical Engineering Brno University of
More informationTransport and Telecommunication, 2013, volume 14, no. 2. Igor V. Kabashkin (born in Riga, August 6, 1954)
Igor V. Kabashkin (born in Riga, August 6, 1954) Vice-rector for Research and Development Affairs of Transport and Telecommunication Institute, Professor, Director of Telematics and Logistics Institute
More informationPRINCIPLES AND CRITERIA FOR THE EVALUATION OF SCIENTIFIC ORGANISATIONS IN THE REPUBLIC OF CROATIA
ashe Agency for Science and Higher Education PRINCIPLES AND CRITERIA FOR THE EVALUATION OF SCIENTIFIC ORGANISATIONS IN THE REPUBLIC OF CROATIA February 2013 Donje Svetice 38/5 10 000 Zagreb, Croatia T
More informationSK CRIS as an Information Resource for Technology Transfer
Podporujeme výskumné aktivity na Slovensku Projekt je spolufinancovaný zo zdrojov EÚ SK CRIS as an Information Resource for Technology Transfer Shearman Adriana Slovak Centre of Technical and Scientific
More informationUNIVERSITY FACULTY OF. State of the
530577 TEMPUS 1 2012 1 RS TEMPUS JPCR http:// /iprod.masfak.ni.ac.rs iprod@ @masfak.ni.ac.rs Work package WP1: 1.2 REPORT UNIVERSITY OF KRAGUJEVAC FACULTY OF ENGINEERING State of the product development
More informationConference Summary Report
Conference Summary Report on Academia-Industry Matching Event on the Mutual Impact of Industry 4.0 and High-Energy Physics Slovakia, March 15-16, 2018 INDUSTRY 4.0 high-tech strategy for German government
More informationDEPARTMENT OF TECHNICAL MECHANICS
STU, Faculty of Mechanical Engineering, Nám. slobody 17, 812 31 Bratislava, Slovak Republic Head of Department: Tel: ++421-2 - 57296484 Ladislav Starek, PhD, Professor Fax: ++421-2 - 57296445 e-mail: ladislav.starek@stuba.sk
More informationScienceDirect. New Design Duplo-Headstock
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 69 ( 2014 ) 1336 1344 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2013 New Design Duplo-Headstock
More informationKyiv National University of Trade and Economics Faculty of Trade and Marketing INFORMATION PACKAGE
Kyiv National University of Trade and Economics Faculty of Trade and Marketing INFORMATION PACKAGE European Credit Transfer and Accumulation System (ECTS) Field of knowledge Specialty Specialization Education
More informationSES 2016 Preparation of the new energy market of EU Secure energy supply Bratislava, Reduta, 27. october International conference.
International conference SES 2016 Preparation of the new energy market of EU Secure energy supply Bratislava, Reduta, 27. october 2016 Organizers: Conference auspices: prime minister of SR with support
More informationSmart specialisation strategy in Bratislava Region
Smart specialisation strategy in Bratislava Region Dr. Stefan VRATNY BIC Bratislava Smart Specialisation Conference Strasbourg 4.12.2012 Innovation strategies on the state and lands level present situation
More information3 calls for proposals announced
Annual Report TA CR 2016 You are opening the first pages of a document that summarises all that was important for and regarding our Agency in 2016. It was a year of many changes that led to the reinforcement
More informationQuality assurance in converging quality cultures. Olve I. Holaas Senior advisor NTNU
Quality assurance in converging quality cultures Olve I. Holaas Senior advisor NTNU Today s questions 1. How can a QA system be rigged to allow for mechanisms of change, change both on an operational level
More informationPROCEEDINGS OF SPIE. Collaboration between applied and. computer optics department of ITMO University with industry s leading
PROCEEDINGS OF SPIE SPIEDigitalLibrary.org/conference-proceedings-of-spie Collaboration between applied and computer optics department of ITMO University with industry s leading manufacturers Alexey Bakholdin,
More informationMICROCHIP PATTERN RECOGNITION BASED ON OPTICAL CORRELATOR
38 Acta Electrotechnica et Informatica, Vol. 17, No. 2, 2017, 38 42, DOI: 10.15546/aeei-2017-0014 MICROCHIP PATTERN RECOGNITION BASED ON OPTICAL CORRELATOR Dávid SOLUS, Ľuboš OVSENÍK, Ján TURÁN Department
More informationStress and Strain Analysis in Critical Joints of the Bearing Parts of the Mobile Platform Using Tensometry
American Journal of Mechanical Engineering, 2016, Vol. 4, No. 7, 394-399 Available online at http://pubs.sciepub.com/ajme/4/7/30 Science and Education Publishing DOI:10.12691/ajme-4-7-30 Stress and Strain
More informationPUC-Rio. Pipeline Engineering
PUC-Rio Pipeline Engineering Research and Education (2018) The Campus at Gavea The University Founded in 1941 Excellence in education & research Leadership role in Brazil Four Centers: Center for Human
More informationAutomation, Robotics, Industrial Research, Basic Research, Academic Education. Address of employer Via Università 4, Modena, tel.
Curriculum Vitae Informazioni personali Surname Name Fantuzzi Cesare Citizenship Italian Date of birth 15/08/1964 Place of birth Bentivoglio (Bologna) Residenza lavorativa e recapiti Address 2, via Amendola,
More informationYancho Todorov, Ph.D. 5, Vodoley st., 4000 Plovdiv, Bulgaria
1 Yancho Todorov, Ph.D. 5, Vodoley st., 4000 Plovdiv, Bulgaria E-mail: yancho.todorov@ieee.org Objective Seeking a position in higher educational institution for teaching of electrical engineering at undergraduate/graduate
More informationUniversity of Technology. Control and Systems Eng. Dept. Curriculum Vitae (C.V.)
University of Technology Control and Dept. Curriculum Vitae (C.V.) Last updated: 1/8/2017 Full name: Assist. Prof. Dr. LAITH JASIM SAUD Gender: Date of birth : Nationality : Place of work : Languages:
More informationOil can talk. We understand the message.
Oil can talk We understand the message www.oelcheck.com Oil can talk We understand the message High performance and still full of power reserves or already used and contaminated and posing serious risks
More informationComputer Simulated and Experimental Verification of Tooling for Progressive Deep Drawing.
8 th International LS-DYNA Users Conference Metal Forming (1) Computer Simulated and Experimental Verification of Tooling for Progressive Deep Drawing. Peter Kostka, Peter Cekan Slovak University of Technology
More informationRESAULTS AND FURTHER RESEARCH AND DEVELOPMENT IN MAINTENANCE
3 rd Conference MAINTENANCE 2014 Zenica, B&H, June 11 13, 2014 RESAULTS AND FURTHER RESEARCH AND DEVELOPMENT IN MAINTENANCE Assoc. Prof. Meng Josef Novák, Ph.D. VŠB-Technical University of Ostrava Ostrava
More informationAerospace Research Centre in Brno University of Technology -goals, organisation and project activities
Aerospace Research Centre in Brno University of Technology -goals, organisation and project activities Prof. Antonin Pistek - Brno University Of Technology, Czech Republic Introduction At the beginning
More informationResearch strategy
Department of People & Technology Research strategy 2017-2020 Introduction The Department of People and Technology was established on 1 January 2016 through an integration of academic environments from
More informationMohammad Abuhaiba, Ph.D., P.E. Registered Professional Engineer at the state of Ohio OBJECTIVE EDUCATION RELEVANT COURSES PUBLICATIONS
Mohammad Abuhaiba, Ph.D., P.E. Registered Professional Engineer at the state of Ohio Email: mhaiba@yahoo.com OBJECTIVE To secure a challenging Academic / Technical position in the field of Mechanical Engineering
More informationCollaboration of Slovak Industry with CERN Future plans and vision
Collaboration of Slovak Industry with CERN Future plans and vision Barbora Bruant Gulejova Industrial Liaison Officer (ILO) & Representative at Knowledge Transfer Forum of CERN 1 Collaboration of Slovak
More informationM.Tech in Machine Design
M.Tech in Machine Design Department of Mechanical Engineering The National Institute of Engineering Mysore-08 (Established in 1946) A Heritage of Excellence NIE Premier educational institutions in India
More informationSven Schmitz. Assistant Professor
Assistant Professor Department of Aerospace Engineering The Pennsylvania State University, University Park, PA 16802 phone: 814-863-0778 email: sus52@engr.psu.edu EDUCATION Ph.D., Mechanical and Aeronautical
More informationBELARUSIAN NATIONAL TECHNICAL UNIVERSITY. BNTU was founded in 1920
BELARUSIAN NATIONAL TECHNICAL UNIVERSITY BNTU was founded in 1920 2014 BELARUSSIAN NATIONAL TECHNICAL UNIVERSITY Leading Higher Engineering-Technical Education Institution in the National Educational System
More informationIntroduction to HSE ISSEK
Introduction to HSE ISSEK Leonid Gokhberg First Vice-Rector, HSE Director, HSE ISSEK Linkages between Actors in the Innovation System Extended Workshop Moscow, 13 June 2012 HSE: Key Facts and Figures Campuses:
More informationMember of the Supervisory Board of Linde Aktien gesellschaft since May 2011 as well as member of the Audit Committee and of the Nomination Committee.
PROF. DR OEC. DR IUR. ANN-KRISTIN ACHLEITNER Member of the Supervisory Board of Linde Aktien gesellschaft since May 2011 as well as member of the Audit Committee and of the Nomination Committee. Born 1966
More informationStudying at preparing courses Studying at PC (Russian language 10 months) Study at PC (Russian language, entrance after 1-st of
Cost for foreign students at the Faculty of International Education NTU "KhPI" in 2016/2017 academic year to students enrolled on an individual contract Type of study Cost per 1 year, in $ Studying at
More informationPIR ROSHAN DIN SHAH RASHDI,
PROFILE PIR ROSHAN DIN SHAH RASHDI, PhD Mehran University of Institute of Science and Technology Development Mehran University of Engineering & Technology Jamshoro, Sindh Pakistan Phone: + 92 222 772430/31
More informationSESSION 2 GOOD PRACTICES FOR ACCELERATING DIGITAL TRANSFORMATION ATING DIGITAL TRANSFORMATION GOOD PRACTICES FOR ACCELER-
SESSION 2 GOOD PRACTICES FOR ACCELER Damian Derlukiewicz, Phd MEng Deputy Director of The Centre for Scientific and Technical Information Specialist of Comercializationand Technology Transfer facilitate
More informationGender Male Date of birth 21 April 1984 Nationality INDIAN. Assistant Professor in Mechanical Engineering (Machine Design)
Curriculum Vitae PERSONAL INFORMATION Mohammad Azeem 57- I Block, Muneer Apartments, Near Badi Masjid, Sir Syed Nagar, Aligarh, 202002, +91-9058819938 ask2azeem@gmail.com https://www.linkedin.com/in/azeemmohammad
More informationCommission on science and Technology for Development. Ninth Session Geneva, May2006
Commission on science and Technology for Development Ninth Session Geneva, 15-19 May2006 Policies and Strategies of the Slovak Republic in Science, Technology and Innovation by Mr. Stefan Moravek Head
More informationTHE CONFERENCE AEROSPACE TECHNOLOGY, MODERN MATERIALS AND EQUIPMENT IS THE PLATFORM FOR THE DEVELOPMENT OF AVIATION ENGINEERING EDUCATION IN RUSSIA
Asian Workshop on Aircraft Design Education AWADE 2016 Nanjing University of Aeronautics and Astronautics (NUAA), 08-11 October 2016 http://aircraftdesign.nuaa.edu.cn/awade2016 THE CONFERENCE AEROSPACE
More informationElection of Members of the Supervisory Board and determination of their remuneration
Magyar Telekom Telecommunications Public Limited Company Submission and resolution proposals to the General Meeting of Magyar Telekom Plc. Subject: Election of Members of the Supervisory Board and determination
More informationPHYSICAL CAVITY OF A DOUBLE-SKIN FACADE EXPERIMENT IN-SITU
PHYSICAL CAVITY OF A DOUBLE-SKIN FACADE EXPERIMENT IN-SITU Milan Bielek Boris Bielek Daniel Szabó Summary Double-skin transparent facade of the Slovak National Bank building in Bratislava. Natural physical
More informationTHE COMPANY PROFILE machine tool manufacturing started
THE COMPANY PROFILE THE COMPANY PROFILE The machine tools bearing the ŠKODA trademark have been manufactured since 1911. For years, the machine tool production volume and exports had been growing until
More informationSERBIA. National Development Plan. November
Consortium of European Social Science Data Archives European Research Infrastructure Consortium November 2017 www.cessda.eu Introduction This first plan for establishing a national data service for the
More informationApplication of NX Siemens PLM software in educational process in preparing students of engineering branch
Application of NX Siemens PLM software in educational process in preparing students of engineering branch G. M. Sadchikova Citation: AIP Conference Proceedings 1797, 030015 (2017); View online: https://doi.org/10.1063/1.4972454
More informationProfile description of the Chair of Ports and Waterways
Faculty Civil Engineering and Geosciences Department of Hydraulic Engineering Profile description of the Chair of Ports and Waterways 1. Position of the Chair of Ports and Waterways 1.1 Background With
More informationManagement and Industrial Engineering. Series editor J. Paulo Davim, Aveiro, Portugal
Management and Industrial Engineering Series editor J. Paulo Davim, Aveiro, Portugal More information about this series at http://www.springer.com/series/11690 J. Paulo Davim Editor Progress in Lean Manufacturing
More informationThe Balkan print media community shows a huge potential
Press Release, 08.11.2011. The Balkan print media community shows a huge potential The sixth Balkan Print Forum (BPF) event under the patronage of manroland AG and the first meeting of the Initiative for
More informationMr. Wolfgang Metzen was trained as a mechanical
Germany AKUSTEC Implementation of PULSE into Automotive Test Cells Automotive, Consultants PULSE Solutions Akustec, based near Munster, Germany, is a consultancy company which was founded by Mr. Wolfgang
More informationAn introduction to the concept of Science Shops and to the Science Shop at The Technical University of Denmark
An introduction to the concept of Science Shops and to the Science Shop at The Technical University of Denmark September 2005 Michael Søgaard Jørgensen (associate professor, co-ordinator), The Science
More informationDemagnetization of instrument transformers before calibration
sciendo COMMUNICATIONS Journal of ELECTRICAL ENGINEERING, VOL 69 (2018), NO6, 426 430 Demagnetization of instrument transformers before calibration Karel Draxler, Renata Styblíková This paper describes
More informationNEW WAYS OF TOOL CUTTING STRATEGY MOTION FOR CNC MILLING OPERATIONS
THE INTERNATIONAL CONFERENCE OF THE CARPATHIAN EURO-REGION SPECIALISTS IN INDUSTRIAL SYSTEMS 7 th edition NEW WAYS OF TOOL CUTTING STRATEGY MOTION FOR CNC MILLING OPERATIONS Jozef Novák-Marcinčin, Technical
More informationSimulation of Negative Influences on the CWDM Signal Transmission in the Optical Transmission Media
Simulation of Negative Influences on the CWDM Signal Transmission in the Optical Transmission Media Rastislav Róka, Martin Mokráň and Pavol Šalík Abstract This lecture is devoted to the simulation of negative
More informationFINANCIAL REFORM IN CENTRAL AND EASTERN EUROPE
FINANCIAL REFORM IN CENTRAL AND EASTERN EUROPE Also by Stephany Griffith-Jones THE CRISES OF DEBT AND DEVELOPMENT LOAN GUARANTEES FOR LARGE INFRASTRUCTURE PROJECTS MANAGING WORLD DEBT INTERNATIONAL FINANCE
More informationRESEARCH PAPERS FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN TRNAVA SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA
RESEARCH PAPERS FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN TRNAVA SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA 2010 Number 28 INFLUENCE OF CUTTING MEDIUM ON DEFORMATION OF THIN RIBS Jozef PETERKA,
More informationWORK PACKAGE 4: Resource alliance
RePCI-PROJECT WORK PACKAGE 4: Resource alliance Deliverable D4.3 Report on analyzing of expertise, facilities and related activities Gabriella Vadászné Bognár University of Miskolc 15 th September 2014
More informationСonceptual framework and toolbox for digital transformation of industry of the Eurasian Economic Union
Сonceptual framework and toolbox for digital transformation of industry of the Eurasian Economic Union Dmitry Krupsky Head of Department of Economy of Innovation Activity, Ministry of Economy of the Republic
More informationApril 18 to 20, 2018 Time: 9:00 am to 5:00 pm Venue: IBA, City Campus
Institute of Business Administration Karachi Leadership and Ideas for Tomorrow April 18 to 20, 2018 Time: 9:00 am to 5:00 pm Venue: CEE @ IBA, City Campus cee.iba.edu.pk Introduction Effective execution
More informationThe Shell Bitumen Handbook
The Shell Bitumen Handbook Sixth edition Principal aufhors Dr Robert N. Hunter, Andy Self and Professor John Read Shell Bitumen Contents About the principal authors Foreword Acknowledgements xii xiv xv
More informationCOLOPHON ZBORNÍK PRÍSPEVKOV PROCEEDING OF PAPERS FROM INTERNATIONAL CONFERENCE OF NÁBYTOK Reviewers:
ZORNÍK PRÍSPEVKOV PROCEEDING OF PPERS FROM INTERNTIONL CONFERENCE OF NÁYTOK 28 Reviewers: Prof. Ing Štefan Schneider, PhD., TU vo Zvolene ssoc. prof. Ing.Pavol Joščák, PhD., TU vo Zvolene ssoc. prof. Juraj
More informationAC : THE NATIONAL PROJECT FOR THE INNOVATIVE DEVELOPMENT OF THE HIGHER ENGINEERING EDUCATION IN RUSSIA
AC 2007-1888: THE NATIONAL PROJECT FOR THE INNOVATIVE DEVELOPMENT OF THE HIGHER ENGINEERING EDUCATION IN RUSSIA Vasili Zhurakovskiy, Russian Association of Engineering Universities Prof., Dr. of Sc., Former
More informationArch Bridge in Nijmegen - new 3D Approach to Workshop Plans
Available online at www.sciencedirect.com Procedia Engineering 40 (2012 ) 114 118 Steel Structures and Bridges 2012 Arch Bridge in Nijmegen - new 3D Approach to Workshop Plans D. Franc a and A. Pechal
More informationAPPOINTMENT OF DIRECTORS AND SUPERVISORS
Hong Kong Exchanges and Clearing Limited and The Stock Exchange of Hong Kong Limited take no responsibility for the contents of this announcement, make no representation as to its accuracy or completeness
More informationEuropass Curriculum Vitae
Europass Curriculum Vitae Personal information Surname(s) / First name(s) Address(es) ŢUCU Dumitru 2, Paris Street, Ap.2, 300 002, Timisoara, Romania Telephone(s) office 0040 256 403601, -3589 home 0040
More informationPublic hearing VADEMECUM OF THE SPEAKERS
Public hearing VADEMECUM OF THE SPEAKERS CZECH TRADE INSPECTION AUTHORITY Jana Sobotková Jana Sobotková studied Law, History of Art and Environmentalism at Masaryk University in Brno and Mykolas Romeris
More informationSLOVAK CLUSTER MATCHMAKING ROADSHOW Prosperity through Cooperation
SLOVAK CLUSTER MATCHMAKING ROADSHOW Prosperity through Cooperation PROFILES OF CONFERENCE SPEAKERS Martin Hlinka Martin Hlinka is an expert in the field of innovation. He was responsible for the creation
More informationFEST Engineering Ltd. Technical Company for Engineering, Calculation and Design of Energy Facilities
FEST Engineering Ltd. Technical Company for Engineering, Calculation and Design of Energy Facilities ABOUT US In operation since 2005, first as FEST Engineering s.r.o., now FEST Engineering Ltd., was originally
More informationRegister of Artistic Results / New Paintings
Register of Artistic Results / Josef Sládek Institute of Machine and Industrial Design Department of Industrial Design Faculty of Mechanical Engineering Brno University of Technology Register of Artistic
More informationBackup Power Supply System Analysis
Backup Power Supply System Analysis Bohuslav LAKOTA 1, Zdislav EXNAR 2, Miroslav MATEJCEK 1, Mikulas SOSTRONEK 1 1 Department of Electronics, Armed Forces Academy of gen. M. R. Stefanik, Demanova 393,
More informationEuropass Curriculum Vitae
Europass Curriculum Vitae Personal information Surname(s) / First name(s) Jelemenský Martin Address(es) 1534/38, Bratislavská, 900 01, Modra, Slovakia Telephone(s) +421 908 846 685 Email(s) martin.jelemensky@gmail.com
More informationDEPARTMENT OF ELECTRICAL ENERGY, METALS, MECHANICAL CONSTRUCTION AND SYSTEMS - EEMMECS SOETE LABORATORY MASTER SOETE LABORATORY
DEPARTMENT OF ELECTRICAL ENERGY, METALS, MECHANICAL CONSTRUCTION AND SYSTEMS - EEMMECS SOETE LABORATORY MASTER THESIS @ SOETE LABORATORY A work in which a student gives proof of analytical, independent,
More informationAutomotive Fasteners for Automotive Industry
Automotive Fasteners for Automotive Industry PEINER Umformtechnik GmbH Woltorfer Straße 20-24 D-31224 Peine Phone + 49 (0) 5171 545-0 Fax + 49 (0) 5171 545-180 e- mail sales@peiner-ut.com Internet www.peiner-ut.com
More informationCONTROL AND DIAGNOSTIC MODEL OF BRUSHLESS DC MOTOR
Journal of ELECTRICAL ENGINEERING, VOL. 65, NO. 5, 4, 77 8 CONTROL AND DIAGNOSTIC MODEL OF BRUSHLESS DC MOTOR Ivan V. Abramov Yury R. Nikitin Andrei I. Abramov Ella V. Sosnovich Pavol Božek A simulation
More informationHOUSE OF COMMONS JOB DESCRIPTION
HOUSE OF COMMONS JOB DESCRIPTION I. JOB IDENTIFICATION Position Title: Collection Cataloguer Job Code: 1927 Position Number: 17170 II. POSITION SUMMARY The Collection Cataloguer develops and maintains
More informationAgenda Item No. C-29 AGENDA ITEM BRIEFING. Vice Chancellor and Dean of Engineering Director, Texas A&M Engineering Experiment Station
Agenda Item No. C-29 AGENDA ITEM BRIEFING Submitted by: Subject: M. Katherine Banks Vice Chancellor and Dean of Engineering Director, Texas A&M Engineering Experiment Station Establishment of the Center
More informationCAPACITIVE EARTH-FAULT CURRENT IN DISTRIBUTION NETWORKS OPERATED WITH THE ISOLATED NEUTRAL POINT
25 TH Expert Meeting "KOMUNALNA ENERGETIKA / POWER ENGINEERING", Maribor, 2016 1 CAPACITIVE EARTH-FAULT CURRENT IN DISTRIBUTION NETWORKS OPERATED WITH THE ISOLATED NEUTRAL POINT Lucie NOHÁČOVÁ, František
More informationProgress begins with transparency
Walter Schmidt CEO ista International Sustainability at ista From metering to conscious action A report on progress Progress begins with transparency»our products and services meter and visualise individual
More informationPOCKET FACTS. ltu.se
POCKET FACTS 2018 ltu.se OURSTRENGTHS n Cutting-edge research n Education and research in close cooperation with companies and society n Areas of excellence in research and innovation VISION Luleå University
More informationDefence and security engineering
Defence and security engineering 2018-2019 Symposia Symposia at Shrivenham provides a forum to Government agencies, military and civilian, industry and research establishments for the exploration and exchange
More informationSyllabus Master Program. Страница 1
SYLLABUS OF MASTER PROGRAM Date : University : Kuban State Agrarian University Master Program Tittle : 19.04.02 Food Products of Plant Origin National Registration Number : 1481 Registration date : 20/11/2014
More informationGAMI Global Advanced Manufacturing Institute Thesis and Internship in Suzhou, China
GAMI Global Advanced Manufacturing Institute Thesis and Internship in Suzhou, China Tobias Arndt November 04 th, 2015 Dipl.-Wirt.-Ing. Stefan Ruhrmann General Manager of GAMI / Suzhou SILU Production Engineering
More informationIntelligent Technologies and Systems Research Team
Intelligent Technologies and Systems Research Team Centre for Intelligent Technologies KKUI FEI TU v Košiciach B. Němcovej 3 042 00 Košice Slovakia http://web.tuke.sk/kkui/ Team Members Prof. Peter Sinčák,
More informationInternational Atomic Energy Agency. Global Safety Assessment Network (GSAN) and Safety Assessment Education and Training (SAET)
Global Safety Assessment Network (GSAN) and Safety Assessment Education and Training (SAET) Global Safety Assessment Network (GSAN) and Safety Assessment Education and Training (SAET) 3 rd Meeting of the
More informationMECHANICAL ENGINEERING
Kaunas University of Technology Faculty of Mechanical and Mechatronics MASTER STUDY PROGRAMME MECHANICAL ENGINEERING Assoc. Prof. Kęstutis Pilkauskas Faculty of Mechanical and Mechatronics The Faculty
More informationWE CREATE AN EXCELLENT FUTURE TOGETHER
WE CREATE AN EXCELLENT FUTURE TOGETHER Introduce yourself on SRIF 2018 2018 Brno s Exhibition Centre II. YEAR 2017 Recapitulation Science Research Innovation Fair creates a new interdisciplinary platform
More informationMarián Gál. VENTURE CAPITAL AS FINANCIAL SOURCE FOR SMEs IN TRANSITIVE ECONOMY OF SLOVAKIA AND HUNGARY. PhD. thesis of defence
UNIVERSITY OF MISKOLC FACULTY OF ECONOMICS Doctoral school Enterprise Theory and Practice Marián Gál VENTURE CAPITAL AS FINANCIAL SOURCE FOR SMEs IN TRANSITIVE ECONOMY OF SLOVAKIA AND HUNGARY PhD. thesis
More informationINNOVATIVE TRENDS IN RAW MATERIALS HEAT TREATMENT
INNOVATIVE TRENDS IN RAW MATERIALS HEAT TREATMENT Prof. Ing. Imrich Kostial, CSc. Ing.Pavol Palicka Ing. Silvia Polakova Development and realization workplace of raw materials extracting and treatment,
More informationSUSTAINABILITY OF RESEARCH CENTRES IN RELATION TO GENERAL AND ACTUAL RISKS
SUSTAINABILITY OF RESEARCH CENTRES IN RELATION TO GENERAL AND ACTUAL RISKS Branislav Hadzima, Associate Professor Stefan Sedivy, PhD., MSc. Lubomír Pepucha, PhD., MSc. Ingrid Zuziaková,MSc. University
More informationIntellectual Property
Tennessee Technological University Policy No. 732 Intellectual Property Effective Date: July 1January 1, 20198 Formatted: Highlight Formatted: Highlight Formatted: Highlight Policy No.: 732 Policy Name:
More informationCurriculum Vitae. Abd El Khalick Mohammad, 17 Nov Doctor of Engineering H-index: 6 and Citation: 107 (Google Scholar) 1.
Curriculum Vitae Abd El Khalick Mohammad, 17 Nov. 1984 Doctor of Engineering H-index: 6 and Citation: 107 (Google Scholar) Previous position: Research Fellow Centre for E-City EXQUISITUS, Electrical and
More informationPLAN OF SECOND DEGREE POSTGRADUATE STUDY
Zał. nr 1 do uchwały nr 44/2015 Rady Wydziału Elektrycznego PB z dnia 20.05.2015 r. BIALYSTOK UNIVERSITY OF TECHNOLOGY FACULTY OF ELECTRICAL ENGINEERING PLAN OF SECOND DEGREE POSTGRADUATE STUDY course
More informationEfficiency classes of three-phase, cage-induction motors (IE-code) software
IX Symposium Industrial Electronics INDEL 2012, Banja Luka, November 0103, 2012 Efficiency classes of three-phase, cage-induction motors (IE-code) software Miloš Božić, Marko Rosić, Branko Koprivica, Miroslav
More informationNEW WORLD ORDER Integration and Multipolarity 2018
NEW WORLD ORDER Integration and Multipolarity 2018 Conference Program 08:30 09:00 REGISTRATION 12:45 14:00 LUNCH 09:00 09:10 09:10 10:30 10:30 11:00 OPENING Norbert Csizmadia (president of the Board, PAIGEO)
More informationGear Technology and Automation Systems
Gear Technology and Automation Systems Gear hobbing machines For machining workpieces with a pitch diameter of max. 16 metres, Liebherr offers a choice of gear hobbing machines with individual concepts
More information