TESTING High type is available (.5 kv between open contacts) TX-D RELAYS New Compliance with RoHS Directive FEATURES. Lineup now includes high type that achieves between open contacts of,5 V AC. between open contacts:,5 V 6 µsec. (FCC part 68) between contact and coil: 6, V. 5 µsec. (EN695). Approved to the supplementary insulation class in the EN standards (EN695). The insulation distance between the contact and coil meet the supplementary insulation class of the EN695 standards as required for equipment connected to the telephone lines in Europe. Satisfies the following conditions: Clearances:. mm.79 inch or more Creepage distance:.5 mm.98 inch or more 3. 3, V between contact and coil. ( 6, V type) The body block construction of the coil that is sealed formation offers a high of 3, V between contact and coil.. Nominal operating power: High sensitivity of mw By using the highly efficient polar magnetic circuit seesaw balance mechanism, a nominal operating power of mw has been achieved. 5. High contact capacity: A 3 V DC 6. High contact reliability achieved with gold-clad crossbar twin contacts and the use of gas expelling materials during formation. *We also offer a range of products with AgPd contacts suitable for use in low level load analog circuits ( V DC ma). *SX relays designed for low level loads are also available. (,5 V type only) 7. Outstanding vibration and shock resistance. Functional shock resistance: 75 m/s Destructive shock resistance:, m/s Functional vibration resistance: to 55 Hz (at double amplitude of 3.3 mm.3 inch) Destructive vibration resistance: to 55 Hz (at double amplitude of 5 mm.97 inch) 8. Sealed construction allows automatic washing. 9. A range of surface-mount types is also available. SA: Low-profile surface-mount terminal type SL: High connection reliability surfacemount terminal type SS: Space saving surface-mount terminal type. M.B.B. type available (,5 V type only) TYPICAL APPLICATIONS. Facsimile. Modem 3. Communications (xdsl). Medical equipment 5. Automotive equipment 6. Security
ORDERING INFORMATION : Surface-mount availability Nil: Standard PC board terminal or self-clinching terminal SA: SA type SL: SL type SS: SS type Operating function Nil: Terminal shape Nil: Standard PC board terminal or surface-mount terminal H: Self-clinching terminal (DC).5, 3,.5, 5, 6, 9,, V L: Type of operation Nil: Standard type M: M.B.B. type (,5 V and type only) TXD material/ (between contact and coil)/breakdown (between open contacts) Nil: Standard contact (AgAu clad),,5 V/, V : AgPd contact (low level load); AgPdAu clad (stationary), AgPd (movable),,5 V/, V 3: Standard contact (AgAu clad), 6, V/,5 V : AgPd contact (low level load); AgPdAu clad (stationary), AgPd (movable), 6, V/,5 V 6: Standard contact (AgAu clad ), 6, V/, V 7: AgPd contact (low level load); AgPdAu clad (stationary), AgPd (movable), 6, V/, V Packing style Nil: Tube packing X: Tape and reel (picked from /3//5-pin side) Z: Tape and reel packing (Picked from the 8/9//-pin side) Note: In case of 5 V transistor drive circuit, it is recommended to use.5 V type relay. TYPES. Standard (B.B.M.) type/ (between contact and coil),5 V/ Breakdown (between open contacts), V ) Standard PC board terminal.5v DC TXD-.5V TXD-L-.5V 3V DC TXD-3V TXD-L-3V.5V DC TXD-.5V TXD-L-.5V 5V DC TXD-5V TXD-L-5V 6V DC TXD-6V TXD-L-6V 9V DC TXD-9V TXD-L-9V V DC TXD-V TXD-L-V V DC TXD-V TXD-L-V Standard packing: Tube: pcs.; Case:, pcs. Note: Please add - to the end of the part number for AgPd contacts (low level load). ) Self-clinching terminal.5v DC TXD-H-.5V TXD-L-H-.5V 3V DC TXD-H-3V TXD-L-H-3V.5V DC TXD-H-.5V TXD-L-H-.5V 5V DC TXD-H-5V TXD-L-H-5V 6V DC TXD-H-6V TXD-L-H-6V 9V DC TXD-H-9V TXD-L-H-9V V DC TXD-H-V TXD-L-H-V V DC TXD-H-V TXD-L-H-V Standard packing: Tube: pcs.; Case:, pcs. Note: Please add - to the end of the part number for AgPd contacts (low level load).
3) Surface-mount terminal () Tube packing.5v DC TXDS -.5V TXDS -L-.5V 3V DC TXDS -3V TXDS -L-3V.5V DC TXDS -.5V TXDS -L-.5V 5V DC TXDS -5V TXDS -L-5V 6V DC TXDS -6V TXDS -L-6V 9V DC TXDS -9V TXDS -L-9V V DC TXDS -V TXDS -L-V V DC TXDS -V TXDS -L-V Standard packing: Tube: pcs.; Case:, pcs. Note: Please add - to the end of the part number for AgPd contacts (low level load). () Tape and reel packing.5v DC TXDS -.5V-Z TXDS -L-.5V-Z 3V DC TXDS -3V-Z TXDS -L-3V-Z.5V DC TXDS -.5V-Z TXDS -L-.5V-Z 5V DC TXDS -5V-Z TXDS -L-5V-Z 6V DC TXDS -6V-Z TXDS -L-6V-Z 9V DC TXDS -9V-Z TXDS -L-9V-Z V DC TXDS -V-Z TXDS -L-V-Z V DC TXDS -V-Z TXDS -L-V-Z Standard packing: Tape and reel: 5 pcs.; Case:, pcs. Notes:. Tape and reel packing symbol -Z is not marked on the relay. X type tape and reel packing (picked from /3//5-pin side) is also available.. Please add - to the part number for AgPd contacts (low level load). (Ex. TXDSA-.5V--Z). M.B.B type/ (between contact and coil),5 V/ Breakdown (between open contacts), V ) Standard PC board terminal.5v DC TXD-M-.5V 3V DC TXD-M-3V.5V DC TXD-M-.5V 5V DC TXD-M-5V 6V DC TXD-M-6V 9V DC TXD-M-9V V DC TXD-M-V V DC TXD-M-V Standard packing: Tube: pcs.; Case:, pcs. ) Self-clinching terminal.5v DC TXD-M-H-.5V 3V DC TXD-M-H-3V.5V DC TXD-M-H-.5V 5V DC TXD-M-H-5V 6V DC TXD-M-H-6V 9V DC TXD-M-H-9V V DC TXD-M-H-V V DC TXD-M-H-V Standard packing: Tube: pcs.; Case:, pcs.
3) Surface-mount terminal () Tube packing.5v DC TXDS -M-.5V 3V DC TXDS -M-3V.5V DC TXDS -M-.5V 5V DC TXDS -M-5V 6V DC TXDS -M-6V 9V DC TXDS -M-9V V DC TXDS -M-V V DC TXDS -M-V Standard packing: Tube: pcs.; Case:, pcs. () Tape and reel packing.5v DC TXDS -M-.5V-Z 3V DC TXDS -M-3V-Z.5V DC TXDS -M-.5V-Z 5V DC TXDS -M-5V-Z 6V DC TXDS -M-6V-Z 9V DC TXDS -M-9V-Z V DC TXDS -M-V-Z V DC TXDS -M-V-Z Standard packing: Tape and reel: 5 pcs.; Case:, pcs. Notes:. Types designed to withstand strong vibration caused, for example, by the use of terminal cutters, can also be ordered. However, please contact us if you need parts for use in low level load. (Ex. TXDSA-M-.5V--Z). Tape and reel packing symbol -Z is not marked on the relay. X type tape and reel packing (picked from /3//5-pin side) is also available. 3. Standard (B.B.M.) type/ (between contact and coil) 6, V/ Breakdown (between open contacts), V ) Standard PC board terminal.5v DC TXD-.5V-6 TXD-L-.5V-6 3V DC TXD-3V-6 TXD-L-3V-6.5V DC TXD-.5V-6 TXD-L-.5V-6 5V DC TXD-5V-6 TXD-L-5V-6 6V DC TXD-6V-6 TXD-L-6V-6 9V DC TXD-9V-6 TXD-L-9V-6 V DC TXD-V-6 TXD-L-V-6 V DC TXD-V-6 TXD-L-V-6 Standard packing: Tube: pcs.; Case:, pcs. Note: Please add -7 to the end of the part number for AgPd contacts (low level load). ) Self-clinching terminal.5v DC TXD-H-.5V-6 TXD-L-H-.5V-6 3V DC TXD-H-3V-6 TXD-L-H-3V-6.5V DC TXD-H-.5V-6 TXD-L-H-.5V-6 5V DC TXD-H-5V-6 TXD-L-H-5V-6 6V DC TXD-H-6V-6 TXD-L-H-6V-6 9V DC TXD-H-9V-6 TXD-L-H-9V-6 V DC TXD-H-V-6 TXD-L-H-V-6 V DC TXD-H-V-6 TXD-L-H-V-6 Standard packing: Tube: pcs.; Case:, pcs. Note: Please add -7 to the end of the part number for AgPd contacts (low level load).
3) Surface-mount terminal () Tube packing.5v DC TXDS -.5V-6 TXDS -L-.5V-6 3V DC TXDS -3V-6 TXDS -L-3V-6.5V DC TXDS -.5V-6 TXDS -L-.5V-6 5V DC TXDS -5V-6 TXDS -L-5V-6 6V DC TXDS -6V-6 TXDS -L-6V-6 9V DC TXDS -9V-6 TXDS -L-9V-6 V DC TXDS -V-6 TXDS -L-V-6 V DC TXDS -V-6 TXDS -L-V-6 Standard packing: Tube: pcs.; Case:, pcs. Note: Please add -7 to the end of the part number for AgPd contacts (low level load). () Tape and reel packing.5v DC TXDS -.5V-6-Z TXDS -L-.5V-6-Z 3V DC TXDS -3V-6-Z TXDS -L-3V-6-Z.5V DC TXDS -.5V-6-Z TXDS -L-.5V-6-Z 5V DC TXDS -5V-6-Z TXDS -L-5V-6-Z 6V DC TXDS -6V-6-Z TXDS -L-6V-6-Z 9V DC TXDS -9V-6-Z TXDS -L-9V-6-Z V DC TXDS -V-6-Z TXDS -L-V-6-Z V DC TXDS -V-6-Z TXDS -L-V-6-Z Standard packing: Tape and reel: 5 pcs.; Case:, pcs. Notes:. Tape and reel packing symbol -Z is not marked on the relay. X type tape and reel packing (picked from /3//5-pin side) is also available.. Please add -7 to the part number for AgPd contacts (low level load). (Ex. TXDSA-.5V-7-Z). Standard (B.B.M.) type/ (between contact and coil) 6, V/ Breakdown (between open contacts),5 V (High type) ) Standard PC board terminal.5v DC TXD-.5V-3 TXD-L-.5V-3 3V DC TXD-3V-3 TXD-L-3V-3.5V DC TXD-.5V-3 TXD-L-.5V-3 5V DC TXD-5V-3 TXD-L-5V-3 6V DC TXD-6V-3 TXD-L-6V-3 9V DC TXD-9V-3 TXD-L-9V-3 V DC TXD-V-3 TXD-L-V-3 V DC TXD-V-3 TXD-L-V-3 Standard packing: Tube: pcs.; Case: 8 pcs. Note: Please add - to the end of the part number for AgPd contacts (low level load). ) Surface-mount terminal () Tube packing.5v DC TXDS -.5V-3 TXDS -L-.5V-3 3V DC TXDS -3V-3 TXDS -L-3V-3.5V DC TXDS -.5V-3 TXDS -L-.5V-3 5V DC TXDS -5V-3 TXDS -L-5V-3 6V DC TXDS -6V-3 TXDS -L-6V-3 9V DC TXDS -9V-3 TXDS -L-9V-3 V DC TXDS -V-3 TXDS -L-V-3 V DC TXDS -V-3 TXDS -L-V-3 Standard packing: Tube: pcs.; Case: 8 pcs. Note: Please add - to the end of the part number for AgPd contacts (low level load).
() Tape and reel packing *Only for SA type. Standard packing: Tape and reel: 5 pcs.; Case:, pcs. Notes:. Tape and reel packing symbol -Z is not marked on the relay. X type tape and reel packing (picked from /3//5-pin side) is also available.. Please add - to the part number for AgPd contacts (low level load). (Ex. TXDSA-.5V--Z) RATING. Coil data [Standard (B.B.M.) type] ) ) [M.B.B. type].5v DC TXDSA-.5V-3-Z TXDSA-L-.5V-3-Z 3V DC TXDSA-3V-3-Z TXDSA-L-3V-3-Z.5V DC TXDSA-.5V-3-Z TXDSA-L-.5V-3-Z 5V DC TXDSA-5V-3-Z TXDSA-L-5V-3-Z 6V DC TXDSA-6V-3-Z TXDSA-L-6V-3-Z 9V DC TXDSA-9V-3-Z TXDSA-L-9V-3-Z V DC TXDSA-V-3-Z TXDSA-L-V-3-Z V DC TXDSA-V-3-Z TXDSA-L-V-3-Z Pick-up (at C 68 F) Drop-out (at C 68 F) *Pulse drive (JIS C 5-986) *Only for surge of,5 V. Nominal operating current [±%] (at C 68 F) :,5V/6, V : 6, V (High ) Coil resistance [±%] (at C 68 F) :,5V/6, V : 6, V (High ) Nominal operating power :,5V/6, V : 6, V (High ) applied (at C 68 F).5V DC 3.7mA 87.5mA Ω 8Ω 3V DC 66.7mA 93.5mA 5Ω 3Ω.5V DC.mA 6.5mA Ω 7Ω 75%V or less %V or more 5V DC of nominal of nominal.ma 56.mA 5Ω 89Ω mw 8mW %V of nominal 6V DC * * 33.3mA 6.5mA 8Ω 9Ω (Initial) (Initial) 9V DC.mA 3.mA 5Ω 89Ω V DC 6.7mA 3.3mA 7Ω 5Ω V DC 9.6mA.9mA,5Ω,858Ω 3mW 3mW Set (at C 68 F) Reset (at C 68 F) Nominal operating current [±%] (at C 68 F) :,5V/6, V : 6, V (High ) Coil resistance [±%] (at C 68 F) :,5V/6, V : 6, V (High ) Nominal operating power :,5V/6, V : 6, V (High ) applied (at C 68 F).5V DC.mA 53.mA 5Ω Ω 3V DC 5.mA 76.9mA 6Ω 39Ω.5V DC 33.3mA 5.mA 35Ω 88Ω 75%V or less 75%V or less 5V DC of nominal of nominal 3.mA 6.3mA 66Ω 9Ω 5mW 3mW %V of nominal 6V DC * * 5.mA 38.5mA Ω 56Ω (Initial) (Initial) 9V DC 6.7mA 5.6mA 5Ω 35Ω V DC.5mA 9.mA 96Ω 66Ω V DC 7.mA.mA 3,388Ω,3Ω 7mW 5mW Pick-up (at C 68 F) Drop-out (at C 68 F) Nominal operating current [±%] (at C 68 F) 66.7mA Coil resistance [±%] (at C 68 F) Nominal operating power.5v DC 9Ω 3V DC 83.3mA 36Ω.5V DC 55.6mA 8Ω 5V DC 75%V or less of %V or more of 5.mA Ω 5mW nominal * nominal * 6V DC (Initial) (Initial).7mA Ω 9V DC 7.8mA 3Ω V DC.8mA 576Ω V DC.3mA,33Ω 7mW applied (at C 68 F) %V of nominal
. Specifications Characteristics Item Specifications Rating Electrical characteristics Mechanical characteristics Expected life Conditions Unit weight Arrangement Form D (M.B.B.type)* resistance (Initial) mω (By drop 6 V DC A) material Nominal switching capacity switching power Standard contact: AgAu clad, AgPd contact (low level load): AgPdAu clad (stationary), AgPd (movable) Standard contact: A 3 V DC, AgPd contact: A 3 V DC (resistive load) Standard contact: 6 W (DC), AgPd contact: 3 W (DC) (resistive load) A 3 V DC (resistive load) 3 W (DC) (resistive load) switching V DC V DC switching current Standard contact: A, AgPd contact: A A TX-D switching capacity (Reference value)* µamv DC,5 V and 6, V types: mw (.5 to V DC), 3mW ( V DC) 6, V (High ) type: 5mW (.5 to V DC), 7mW ( V DC) Nominal operating power 8mW (.5 to V DC), 3mW ( V DC),5 V and 6, V types: 5mW (.5 to V DC), 7mW ( V DC) 6, V (High ) type: 3mW (.5 to V DC), 5mW ( V DC) Insulation resistance (Initial),MΩ (at 5V DC) Measurement at same location as Initial section.,5 V and 6, V types: Between open contacts, Vrms for min. (Detection current: ma) 5 Vrms for min. (Detection current: ma) 6, V (High ) type: Breakdown,5 Vrms for min. (Detection current: ma) (Initial),5 V type:, Vrms for min. (Detection current: ma) Between contact and coil 6, V and, Vrms for min. (Detection current: ma) 6, V (High ) types: 3, Vrms for min. (Detection current: ma) Between contact sets, Vrms for min. (Detection current: ma) Between open contacts,5 V ( 6µs) (FCC Part 68) (Initial) Between contacts and coil* Temperature rise (at C 68 F) Operate time [Set time] (at C 68 F) Release time [Reset time] (at C 68 F) Shock resistance Functional,5 V type:,5 V, µs (Telcordia) 6, V and 6, V,5 V, µs (Telcordia) (High ) types: 6, V,. 5µs 5 C F (By resistive method, nominal coil applied to the coil; contact carrying current: A [A: M.B.B.].) ms [ ms] ( applied to the coil, excluding contact bounce time.) ms [ ms] ( applied to the coil, excluding contact bounce time.) (without diode) 75 m/s (Half-wave pulse of sine wave: 6 ms; detection time: µs.) 5 m/s (Half-wave pulse of sine wave: ms; detection time: µs.) Destructive, m/s {G} (Half-wave pulse of sine wave: 6 ms.) Vibration Functional to 55 Hz at double amplitude of 3.3 mm (Detection time: µs.) resistance Destructive to 55 Hz at double amplitude of 5 mm Mechanical 8 (at 8 cpm) 7 (at 8 cpm) Electrical 5 ( A 3 V DC resistive), 5 5 ( A 3 V DC resistive) (at cpm) 5 ( A 3 V DC resistive) (at cpm) Conditions for operation, transport and storage* 3 operating speed (at rated load) Ambient temperature: C to 85 C F to 85 F; Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) cpm Approx. g.7 oz Notes: * M.B.B. type models are only available in,5 V surge type. * This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (AgPd contact type or SX relays are available for low level load switching [V DC, ma max. level]) *3 The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to [6] AMBIENT ENVIRONMENT in GENERAL APPLICATION GUIDELINES.
REFERENCE DATA. Maximum switching capacity. Life curve 3. Mechanical life Tested sample: TXD-5V, pcs. Operating speed: 8 cpm Switching current, A 3....5..3. DC resistive load 3 5 3, V No. of operations 5 3 3V DC resistive load.. Switching current, A Ratio against the rated, %V 9 8 7 6 5 3 Pick-up Drop-out No. of operations,. Electrical life ( A 3 V DC resistive load) Tested sample: TXD-5V, 6 pcs. Operating speed: cpm Change of pick-up and drop-out Change of contact resistance 5-(). Coil temperature rise Tested sample: TXD-5V, 6 pcs. Measured portion: Inside the coil Ambient temperature: 5 C 77 F, 7 C 58 F Ratio against the rated, %V 9 8 7 6 5 3 Pick-up Drop-out resistance, mω 9 8 7 6 5 3 Temperature rise, C 7 6 5 3 A A A A 5 C 7 C 77 F 58 F 6 8 No. of operations, 6 8 No. of operations, Coil applied, %V 5-(). Coil temperature rise Tested sample: TXD-V, 6 pcs. Measured portion: Inside the coil Ambient temperature: 5 C 77 F, 7 C 58 F 6-(). Operate/release time characteristics (with diode) Tested sample: TXD-5V, pcs. 6-(). Operate/release time characteristics (without diode) Tested sample: TXD-5V, pcs. Temperature rise, C 7 6 5 3 A A A A 5 C 7 C 77 F 58 F Operate and release time, ms 5 3 Operate time Release time Operate and release time, ms 5 3 Operate time Release time Coil applied, %V 7 8 9 Coil applied, %V 7 8 9 Coil applied, %V 7. Ambient temperature characteristics Tested sample: TXD-5V, 5 pcs. 8. High-frequency characteristics (Isolation) Tested sample: TXD-V, pcs. 9. High-frequency characteristics (Insertion loss) Tested sample: TXD-V, pcs. Variation ratio, % x Drop-out x Pick-up 6 8 Ambient temperature, C Isolation, db 5 Insertion loss, db..8.6.., Frequency, MHz, Frequency, MHz
. Malfunctional shock (single side stable) Tested sample: TXD-5V, 6 pcs -(). Influence of adjacent mounting Tested sample: TXD-V, 6 pcs. -(). Influence of adjacent mounting Tested sample: TXD-V, 6 pcs. TX-D Z' Y Y' Z X m/s m/s Z' X X' m/s Y m/s Y' Deenergized condition Energized condition Z m/s m/s X' Rate of change, % Rate of change, % 5 ON ON Pick-up 5 5 5 ON OFF OFF Drop-out OFF 6 8.79.57.36.35.39 Inter-relay distance, mm inch Rate of change, % Rate of change, % 5 ON Pick-up ON 5 ON OFF 5 Drop-out OFF 5 OFF 6 8.79.57.36.35.39 Inter-relay distance, mm inch. Actual load test (35 ma 8 V DC wire spring relay load) Tested sample: TXD-5V, 6 pcs. Change of pick-up and drop-out Change of contact resistance Circuit 58 Ω.8.8 µf µf 8 V DC 58 Ω Wire spring relay 3 TXD Ratio against the rated, %V 9 8 7 6 5 3 Pick-up Drop-out resistance, mω 9 8 7 6 5 3 3 5 No. of operation, 3 No. of operation, 5 3-(). Distribution of M.B.B. time Tested sample: TXD-M-5V, 5 pcs. Terminal No. 3--5: ON Terminal No. 3--5: OFF 6 5 x: 3.5 µs σn-: 55.3 µs : 65 µs : 5 µs 6 5 x: 98.8 µs σn-: 5.8 µs : 5 µs : 3 µs 3 3 7 6 5 5 3 35 µs min. 5 5 3 35 5 µs max. 6 3 8 5 5 3 35 µs min. 5 5 3 35 5 µs max. 3-(). Distribution of M.B.B. time Tested sample: TXD-M-5V, 5 pcs. Terminal No. 8-9-: ON Terminal No. 8-9-: OFF. test Tested sample: TXD-3V-6, 3 pcs. 6 5 x: 93. µs σn-: 6. µs : 55 µs : 5 µs 6 5 x: 8. µs σn-: 58.3 µs : µs : µs 3 5 5 3 35 µs min. 5 5 3 35 5 µs max. 8 5 3 3 5 5 3 35 µs min. 5 5 3 35 5 µs max. 6 9 5 8 6 7 7 7 76 78 8 8 8 86, V
DIMENSIONS (mm inch) The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac.,5 V and 6, V types ) Standard PC board terminal and self-clinching terminal CAD Data External dimensions Standard PC board terminal PC board pattern (Bottom view) Schematic (Bottom view),5 V type 5..59.5..5 5.8.5...65.6 8..33 3.5.38 7..9.5 5.8...6.. 5.8. 8-. dia. 8-.39 dia. Tolerance: ±. ±. 3 5 9 8 (Deenergized condition) 3 5 9 8 (Reset condition) Self clinching terminal 5..59.65.6 8..33 7..9 6, V type.5..5 5.8.5.. 3.5.38.5. 5.8. General tolerance: ±.3 ±. ) Surface-mount terminal CAD Data Type External dimensions (General tolerance: ±.3 ±.) Suggested mounting pad (Top view) (Tolerance: ±. ±.) and and SA type.5. 5.8. 5.59 8..33.65.6. 8..33 7..9 5.8. 9.±.5.37±..5. 3.6.39. 5.8.. 7..85 SL type.5. 5.8. 5.59. 8..33.39 7..9.65.6 5.8. 9.±.5.37±..5. 3.6.39. 5.8.. 7..85 SS type.5. 5.8. 5.59. 8..33.39 7..9.65.6 5.8. 7.±.5.9±..5..6.85.39 5.8.. 6..6 Schematic (Top view) 9 8 9 8 3 5 (Deenergized condition) 3 5 (Reset condition)
. 6, V (High type) ) Standard PC board terminal CAD Data External dimensions Standard PC board terminal PC board pattern (Bottom view) TX-D Schematic (Bottom view).5..5.5 5..59 5.8.. 7..9.65 9.5.6.37 3.5.38 5.8..5..6.. 5.8. 8-. dia. 8-.39 dia. Tolerance: ±. ±. 3 5 9 8 (Deenergized condition) 3 5 9 8 (Reset condition) General tolerance: ±.3 ±. ) Surface-mount terminal CAD Data Type External dimensions (General tolerance: ±.3 ±.) Suggested mounting pad (Top view) (Tolerance: ±. ±.) and and 5..59 7..9 3.6.39. 5.8.. SA type.5. 9.5.37 9.65.38 7..85.5.65 5.8..6. 5.8.5.5.. 9.±.5.37±. SL type 5..59 7..9 3.6.39..5 9.5.5..37.3 7..85 5.8...65.5.6. 5.8.5.5.. 5.8. 9.±.5.37±. 7..9 SS type.5. 5..59 9.5.37.5.3.6.85.39 5.8.. 6..6.65.5.6. 5.8.5.5.. 5.8. 7.±.5.9±. Schematic (Top view) 9 8 9 8 3 5 (Deenergized condition) 3 5 (Reset condition)
NOTES. Packing style ) Tube packing The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below. Orientation (indicates PIN No.) stripe () Dimensions of plastic reel. ±.5.79 ±..87 ±.6 ±. dia. dia. mm inch ± 8 dia. ±.39 3.5 dia. 3. M.B.B. type A small OFF time may be generated by the contact bounce during contact switching. Check the actual circuit carefully. If the relay is dropped accidentally, check the appearance and characteristics including M.B.B. time before use. Stopper (gray) ) Tape and reel packing (surface-mount terminal type) () Tape dimensions (i) SA type mm inch TX-D relays (ii) SL type (iii) SS type 6..63 Tape coming out direction D..39 Stopper (green)..5 dia. Relay polarity bar..59 (Z type)...75 dia...79.57.69.6 C A B.5.53 5.5.6 Relay polarity bar (Z type) TX-D relays Relay polarity bar (Z type) TX-D relays 6..63..39 Tape coming out direction. ±.3 ±. ±..95 9..36±.8 mm inch..5 dia...59 dia....75..79.57.69.6 6..63 Tape coming out direction.5.53 5.5.6. ±.3.95 ±. ±..8.5±.8.5.53 5.5.6 8..35 mm inch..5 dia...59 dia....75..79.57.69.6. ±.3.95 ±. ±..8 ±.8.5 3.5 dia. dia...96 3) Ambient temperature when transporting and during storage with the product in its original packaging: to 7 C to 58 F. Automatic insertion To maintain the internal function of the relay, the chucking pressure should not exceed the values below. A Chucking pressure in the direction A:.9 N {5gf} or less Chucking pressure in the direction B: 9.8 N { kgf} or less Chucking pressure in the direction C: 9.8 N { kgf} or less Please chuck the portion. Avoid chucking the center of the relay. In addition, excessive chucking pressure to the pinpoint of the relay should be avoided. C ±.5 ±..79 B ± 38 dia. ±.79.96 dia. ±...79 ±.8 5V DC µs 5Ω Measuring condition of M.B.B. time For general cautions for use, please refer to the Cautions for use of Signal Relays or General Application Guidelines.