Genuine Stone Veneers Wafer-thin for creative design www.design-mwm.de
2 5 years guarantee
GENUINE STONE VENEERS Wafer-thin for creative design Our Genuine Stone Veneer, also called Slate-Lite is a veneer with a genuine stone surface. Many wafer-thin slates can be produced from the most beautiful slate blocks of the world by our method. 3 Each individual slate is unique for itself that maintains the haptics and optics of an entire slate. Because the material shows all properties of a genuine stone on the side of the stone, however it is incredibly flexible and light, fabulous projects can be realized. There is virtually no limit with regard to the application. Be it for wall cladding, in the furniture industry or as covering for walls and floors, there is a solution for all applications.
Genuine Stone Veneer Slate Lite (Interior, Outside, Bath) 4 Areas of application Wall cladding Walls at fireplaces and fire place construction Bath / sanitary areas Interior design with light Outside walls Furniture decors Door decors Floorings Ceilings Kitchens Properties 100% natural stone surface More resistant than rough slates by penetration with polyester Strength 1.2 2.0 mm Weight approx. 1.5 kg/m2 Shapes: 1,220mm x 610mm (Other sizes upon request) Tolerance 1-2 mm in length and width Fire protected material available: CdOs3 Adhesive PU adhesive Polymer adhesive Epoxy resins Silicones Processing Cutting with circular table saw/hand-held circular saw (Timber or stone saw blade) Drilling and milling: attachments for timber or stone Increase of flexibility by heat (Heat gun approx. 400ₒC) Specialities Extreme easy to transport Long-time subsequent delivery of decors possible Easy to lay over curves and edges Can be fitted tile on tile Material composition Subject to human error
Genuine Stone Veneer Eco Stone (Interior, Furniture) Areas of application Wall cladding Walls at fireplaces and fire place construction Kitchens Furniture decors Door decors Ceilings Properties 100% natural stone surface Rear of a textile mat Strength 1 mm Weight approx. 0.8 kg/m2 Shapes: 1,220mm x 610mm +/- 3mm in length and width and tolerance in the right angels For the industrial demand the tolerance can be adjusted Processing Cutting: from the rear with a carpet knife Flexibility and elasticity: natural elasticity Joints: standard stone silicone or joint material, can be fitted joint on joint also Specialities Abrasion-resistant by sealing Extremely light for transport Long-term subsequent delivery of decors Easy to lay over curves and edges, also 90 ₒcorners Flexible material allows a complete new application area Environmentally friendly production 5 Adhesive Inner wall: glass fibre wallpaper paste Timber: white or wood glue Steel, glass, etc.: any glue which can stick together with the base material Material composition Subject to human error
Decor Standard size of slate = 1,220mm x 610mm One slate corresponds = 0.7442m 2 Colour slate Falling Leaves California Gold Negro 6 Akrobalento Colore Molto Rosa Rustique Terra Rosso Tan Akrobalento Gris Blanco Availability of decors upon request
Decor Standard size of slate = 1,220mm x 610mm One slate corresponds = 0.7442m 2 Mica-slate Cobre Verde Galaxy Black Cobre New Auro Argento Auro 7 Mare Burning Forest Silver Grey Verde Gris Argento D. Black Availability of decors upon request Decor Translucent The decor Translucent is available in all above shown decors. Translucent Genuine Stone Veneer is the absolute design element. The translucent stones turn every room into a unique experience of the senses. Translucent has the same properties like Genuine Stone Veneer, except for the translucence. If the illumination behind the Genuine Stone Veneer is switched off, the effect is like ordinary slate. Unique patterns appear when the light source is switched on.
MWM GmbH & Co KG Hüttenstr. 12 59759 Arnsberg Telephone +49 (0) 29 32-4 75 98-01 Telefax +49 (0) 29 32-4 75 98-10 E-Mail info@design-mwm.de www.design-mwm.de