cats and dogs Quilt Sze: 40 x 55 Design by: Marinda Stewart Level: CONFIDENT BEGINNER Free Pattern available on michaelmillerfabrics.com
FABRIC REQUIREMENTS CX6929 Lime CX6929 Aqua CX6929 Clementine CX7615 Lime & 2 7/8 backing CX7615 Aqua CX7615 Clementine Fat 1/4 CX5456 Black Paw Prints CX4768 Aqua CX4768 Limeade CX7256 Coral Tiny Stitches CX1065 Dalmatian Garden Pindot CX5514 Ebony Pinhead CX0482 White Clown Check 1/2 yard SC5333 Coral SC5333 Caribbean SC5333 Kryptonite 12 Kits 24 Kits CX6929 Lime 1 1/2 yards (1 bolt) 3 yards (1 bolt) CX6929 Aqua 1 1/2 yards (1 bolt) 3 yards (1 bolt) CX6929 Clementine 4 1/2 yards (1 bolt) 9 yards (1 bolt) CX7615 Lime 1 1/2 yards (1 bolt) 3 yards (1 bolt) CX7615 Aqua 4 1/2 yards (1 bolt) 9 yards (1 bolt) CX7615 Clementine 3 yards (1 bolt) 6 yards (1 bolt) CX5456 Black 4 1/2 yards (1 bolt) 9 yards (1 bolt) CX4768 Aqua 1 1/2 yards (1 bolt) 3 yards (1 bolt) CX4768 Limeade 4 1/2 yards (1 bolt) 9 yards (1 bolt) CX7256 Coral 1 1/2 yards (1 bolt) 3 yards (1 bolt) CX1065 Dalmatian 1 1/2 yards (1 bolt) 3 yards (1 bolt) CX5514 Ebony 4 1/2 yards (1 bolt) 9 yards (1 bolt) CX0482 White 6 yards (1 bolt) 12 yards (1 bolt) SC5333 Coral 1 1/2 yards (1 bolt) 3 yards (1 bolt) SC5333 Caribbean 1 1/2 yards (1 bolt) 3 yards (1 bolt) SC5333 Kryptonite 1 1/2 yards (1 bolt) 3 yards (1 bolt) CX7615 Lime (Backing) 34 1/2 yards (3 bolts) 69 yards (5 bolts) p. 212.704.0774 f. 212.633.0272 info@michaelmillerfabrics.com www.michaelmillerfabrics.com
Cats and Dogs Quilt designed by Marinda Stewart Size: 40 W x 55 H Skill Level: Confident Beginner Note: This quilt is constructed using (8) vertical rows Fabrics Yardage Cutting CX6929 Lime * (2) 5 ½ square (4) 3 ½ square CX6929 Aqua * (2) 5 ½ square CX6929 Clementine (2) 5 ½ square (2) 1 ¾ W x 10 ½ H ** CX7615 Lime * (2) 6 square CX7615 Aqua CX5456 Black Paw Prints CX4768 Aqua CX4768 Limeade CX7256 Coral Tiny Stiches CX1065 Dalmatian Garden Pindot CX5514 Ebony Pinhead CX0482 White Clown Check SC5333 Coral SC5333 Caribbean SC5333 Kryptonite CX7615 Lime CX7615 Clementine (2) 5 ½ square (2) 6 square (2) 5 ½ square (2) 1 ¾ W x 10 ½ H ** (5) 2 ½ x W.O.F. binding * (2) 5 ½ square (1) 5 ½ square (4) 3 ½ square (12) 1 ¾ x 10 ½ * (2) 5 ½ square * (4) 5 ½ square (4) 5 ½ square (12) 1 ¾ x10 ½ ½ yard (9) 5 ½ x 10 ½ * (2) 6 square (3) 3 ¼ circles *** * (2) 6 square (3) 3 ¼ circles *** * (2) 6 square (3) 3 ¼ circles *** 27/8 yards Backing see directions oneway print Fat 1/4 (2) 6 square (2) 5 ½ square * A piece of fabric 9 x 22
** Cut vertically one-way print *** See pattern Also Needed: 48 x 65 batting, threads to match, scissors, straight pins, rotary cutter, acrylic ruler, mat, and fusible web. Directions: 1. Sew together (1) each 1 ¾ x 10 ½ pieces of CX4768 Limeade, CX7615 Aqua, CX6929 Clementine, CX5514 in order left to right. Keep motifs upright. Make (12) 5 ½ x 10 ½ units total. Set aside. 2. For large pinwheel block units place one CX7615 Lime 6 square right sides together on top of one SC5333 Kryptonite 6 square. Draw a diagonal line from corner to corner. Sew ¼ on each side of the drawn line. Cut apart on the drawn line. Press. Trim each half square triangle unit to an accurate 5 ½ square. Repeat with the remaining CX7615 Lime and SC5333 Kryptonite 6 squares. Make (4) total. Repeat using CX7615 Aqua and SC5333 Caribbean 6 squares and CX7615 Clementine and SC5333 Coral 6 squares. Set all aside. 3. For small pinwheel blocks (5 ½ square) repeat the process in Step #2 using CX4768 Aqua 2 ½ squares and CX6929 Aqua 3 ½ squares. Trim each half square triangle to an accurate 3 square. Sew (4) half square triangles together, as shown, to make (1) 5 ½ square pinwheel. Make (3) pinwheel blocks total. Repeat using CX7256 3 ½ squares and CX6929 Clementine. Make (3) 5 ½ blocks. Repeat using CX4768 Limeade and CX6929 Lime. Make (2) 5 ½ blocks total. Set all blocks aside. 4. Trace (9) 3 ¼ circles onto the paper side of the fusible web. Rough cut out. Iron (3) each on SC5333 Coral, Caribbean, and Kryptonite. Cut out. Remove paper backing, Iron one circle onto the right side of one CX0482 5 ½ x 10 ½ piece as shown. Using matching thread, hand or machine stitch around the raw edges of the circle. Machine satin stitching was used in this quilt. Make (3) each of Caribbean, Coral, and Kryptonite. Set aside. 5. To assemble quilt by row from top to bottom: Row #1 Start with a Lime 5 ½ half square triangle, add another Lime 5 ½ half square triangle as shown. Refer to photo. Next, add a CX4768 Aqua 5 ½ square, followed by a CX5514 5 ½ square. Add a 5 ½ x 10 ½ stripe unit, followed a CX7256 5 ½ square and end with a 5 ½ x 10 ½ stripe unit. Keep motifs upright. Row #2 Sew the remaining (2) Lime 5 ½ half square triangles together as shown. Add a striped unit, a 5 ½ Coral pinwheel, a 5 ½ x 10 ½ Coral circle unit, CX7615 Aqua 5 ½ square, CX1065 5 ½ square, and a Lime circle unit. Sew row to right side of Row #1. Row #3 CX7256 5 ½ square, Aqua circle piece, CX6929 Aqua 5 ½ square, CX1068 5 ½ square, CX7615 Clementine 5 ½ square, stripe unit, Aqua 5 ½ half square triangle. Refer to photo for placement. End with a CX6929 Clementine 5 ½ square. Join to quilt.
Row #4 Begin with a stripe unit followed by a CX7615 Clementine 5 ½ square. Add another stripe unit followed with an Aqua 5 ½ pinwheel. Add an Aqua circle block. Follow with (2) Aqua half square triangles to complete the large pinwheel as shown. End with a CX5514 5 ½ square. Join to quilt, matching seams as needed. Row #5 Sew an Aqua pinwheel to the bottom of a CX7615 Lime 5 ½ square. Add a Lime circle block followed by a CX4768 Limeade 5 ½ square. Add a stripe unit, followed by a CX5514 5 ½ square and a CX6929 Lime 5 ½ square. End with a stripe unit. Join to the quilt. Row #6 Sew a CX4768 Aqua 5 ½ square to the bottom of a stripe unit. Add (2) Coral 5 ½ half square triangles as shown, followed by a CX6929 Lime 5 ½ square and a CX1065 5 ½ square. Add a Coral 5 ½ pinwheel, a Coral circle block, and end with a CX6929 Aqua 5 ½ square. Join to the quilt. Row #7 Sew a stripe unit to the bottom of a CX6939 Coral 5 ½ square. Follow with (2) Coral 5 ½ half square triangle units. Refer to photo for placement. Add a Lime circle block. Follow with a stripe unit, a Coral 5 ½ pinwheel, and a CX5514 5 ½ square. Join to quilt. Row #8 Sew a CX7615 Aqua 5 ½ square to the bottom of a Lime pinwheel. Follow with an Aqua circle block, a stripe unit, and Aqua pinwheel, a CX7615 Lime 5 ½ Square, CX1065 5 ½ square, and a stripe unit. Join to quilt. 6. For backing, from CX7615 Lime cut (1) W.O.F. x 66 piece. Remove selvage edges. From the remaining yardage cut (2) 6 wide pieces vertically. Sew together across the 6 edge. Keep motifs upright. Sew pieced strip to one side of the 66 piece. Trim off excess to make approximately 50 x 66 piece. 7. Layer backing, batting, and quilt top. Baste. 8. Quilt as desired. 9. Bind quilt using CX5456 2 ½ wide strips, pieced as needed for length.
Kit Info (12) Kits (24) Kits CX6929 Lime 1 ½ yards (1) bolt 3 yards (1) bolt CX6929 Aqua 1 ½ yards (1) bolt 3 yards (1) bolt CX6929 Clementine 4 ½ yards (1) bolt 9 yards (1) bolt ** CX7615 Lime 1 ½ yards (1) bolt 3 yards (1) bolt CX7615 Aqua 4 ½ yards (1) bolt 9 yards (1) bolt CX7615 Clementine 3 yards (1) bolt 6 yards (1) bolt CX5456 Black 4 ½ yards (1) bolt 9 yards (1) bolt CX4768 Aqua 1 ½ yards (1) bolt 3 yards (1) bolt CX4768 Limeade 4 ½ yards (1) bolt 9 yards (1) bolt CX7256 Coral 1 ½ yards (1) bolt 3 yards (1) bolt CX1065 Dalmatian 1 ½ yards (1) bolt 3 yards (1) bolt CX5514 Ebony 4 ½ yards (1) bolt 9 yards (1) bolt CX0482 White 6 yards (1) bolt 12 yards (1) bolt SC5333 Coral 1 ½ yards (1) bolt 3 yards (1) bolt SC5333 Kryptonite 1 ½ yards (1) bolt 3 yards (1) bolt SC5333 Caribbean 1 ½ yards (1) bolt 3 yards (1) bolt Backing: CX7615 Lime 10 ½ yards (1) bolt ** 21 yards (2) bolts ** ** Includes amount for piecework listed above