nvt.com Network Video Technologies CCTV NETWORK SOLUTIONS
NETWORK VIDEO TECHNOLOGIES Who we are, what we do NVT is in the business of transmitting CCTV video over unshielded twisted pair wire via structured cabling networks. It is our mission to enable our customers to connect cameras and control/recording equipment via transmission methods that provide the highest video quality and system reliability, even under adverse conditions. We allow our customers to fully utilize their currently installed legacy analog equipment or switch to IP as needed via bridged structured cabling networks that are robust and future proof for any application eventuality. NVT it is all about providing choices NVT s goal is to provide customer choice. Choice about the use of UTP over coax or fiber; choice to use existing high quality analog cameras over expensive and low performing IP cameras. NVT provides products that allow our customers a choice on how to migrate to structured cabling and IP. We want to educate our customers on how they can use their current analog equipment, connect it via UTP structured cabling and migrate to IP if they so choose on their own schedule and within their own budget constraints. The NVT Power-Video-Data (PVD) product range allows customers to power cameras at a distance and providing cable saving connections for video and control. All current NVT products utilize a UTP based structured cabling infrastructure to provide organized cable management and future proof application choice to the customer. On the horizon NVT is experiencing substantial growth on a global basis, not only in mature markets like North America, but also in the UK, EU, Latin America and Asia. We have established NVT UTP based video solutions as a reliable CCTV transmission choice. We are very excited to develop quality products for our customers and provide cost effective and future proof solutions to the global market. 2
CONTACT INFORMATION, WARRANTY AND SUPPORT Who is NVT? NVT is the worldwide leader in UTP CCTV transmission. Our focus on this technology enables us to supply excellence in product quality and world-class customer support. Constant product research and evaluation guarantees that NVT s product offering contains technologies and user interfaces that work for the customer. We only supply products that are best in class, easy to use and well supported. Consistent Stock Availability We expect our customers to be able to place an order with us, large or small and receive a professional reception and same day shipment. NVT is sold through hundreds of CCTV product distributor locations in the US and Canada. Fast and Reliable Delivery Capability Our goal is fast and reliable delivery of customer orders. This commitment is the primary objective of our logistical infrastructure. Items ordered prior to 4:00PM (PST Monday to Friday) will typically ship the same day. Limited Lifetime Warranty and Advance Replacement We offer a unique limited lifetime warranty. If an NVT product fails for any reason, any time, it will be replaced. Just call customer service to make arrangements to return the product and arrange for an advanced replacement shipment. Superior Technical and Application Support Our technical staff is trained to provide first line support on every product we sell, providing installers with the reassurance of expert technical backup from 8:00AM to 5:30PM Monday to Friday PST. NVT has over ten sales managers throughout the US and Canada who provide training and support as needed. Our sales team is supported by 17 independent representative groups across the North American region. North American Customer/Technical Support NVT customer support can be reached 8:00AM to 5:30PM PST at (800) 959-9870 or at (+1) (650) 462-8100. 3
WHY NVT PRODUCTS ARE BETTER Why is NVT Technically Better? In order to create a solution that is robust, reliable and usable, NVT designed products that can be used with confidence under varied conditions. Unlike conventional video baluns, NVT incorporated many technical features into its products, resulting in award winning performance. Here are the details: Video Interference Immunity When video cables are run near potential interfering sources such as low voltage power, datacom or telecom, most baluns depend on the inherent cross-talk performance of the cable to achieve adequate interference immunity. Unfortunately they only do a limited job of balancing the signal. One pivotal advantage of NVT products is their unsurpassed interference immunity. Measured as the Common-Mode Rejection Ratio (CMRR), most baluns have about 30 db of immunity. NVT s patented technology affords 60 db of CMRR over the wide frequency range (15KHz to 5MHz) of a video signal. Surge and Lighting Protection In many locations, the effects of surge or lightning can be a problem affecting security exposure and replacement cost. NVT devices have a seven-element protection circuit that incorporate high-current lowcapacitance avalanche-diode, gas-discharge, and multi-stage series inductive and shunt-capacitive filtering. These units meet ANSI/IEEE 587 C62.41. All NVT passive transceivers employ this protection. Floating the equipment at the camera end while grounding the head-end yields exceptional protection. Ordinary baluns don t have this feature. Ground Loop Isolation Video baluns and NVT transceivers do not have low-frequency groundloop immunity. They are not worse than a piece of coax, but they re not better either. To ensure ground-loop immunity, NVT recommends floating the low-voltage camera (follow the camera manufacturer s instructions). By doing so, the camera s ground and the control-room ground will never compete and generate noise currents. Some cameras do not have isolated low-voltage power inputs. For this reason, consider using a power supply that has individually floating outputs. Most multi-output supplies share a common bus with separate fuses, which will not prevent these sorts of ground loops. Unlike conventional multi-output supplies, the NV-4PS10-PVD, NV-16PS10-PVD, NV-8PS13-PVD, and NV-16PS13-PVD provide power that is truly individually floating. Another way to prevent ground-loops is to incorporate active NVT receivers. These devices have a differential input for ground lifting. Distance Equalization As a signal travels down any wire, its amplitude attenuates. Regardless of the manufacturer (or their extended distance datasheet claims) passive-to-passive solutions will begin to show dim grey images above 750 feet of wire. It s not the baluns, it s the wire. To address this, NVT has active receivers. These devices amplify the signal to compensate for cable-loss, and can bring the signal level back up to 1 volt peak-to-peak. Unlike other devices, NVT active receivers have continuously adjustable gain settings that allow accurate equalization at any distance up to 3000 feet, or 1 mile when used with the NV-653T Transmitter. With ground-loop immune active receivers, field installations go in and work correctly every time. Lifetime Warranty Although not a technical spec per se, NVT s lifetime warranty is one way NVT can demonstrate its confidence in the quality and reliability of its products. Competent tech support and advance-replacements are other measures NVT delivers to provide a total support solution to its customers. 4
TRADITIONAL CCTV PRODUCT BENEFITS AND APPLICATIONS Fiber-like quality at a fraction of the cost Superior interference immunity Transmit longer distances than coax Potential of using existing cable Lower labor costs to install vs. coax {(1) 25 pair pull = (1) coax pull} Higher density than coax (1/10th the size) UTP is a multi-use cable Easier termination and/or repair than coax or fiber Lower cost for cable, cable trays, and conduit Passive to Passive Application Up to 750ft (225m) NV-208A-M Backbone UTP Multi-pair Multi-channel transceiver passive hub available in 4, 8, 16 and 32 Channel Monitor NV-214A-M Punch blocks (IDF) DVR/NVR IP Passive to Active Application Up to 3,000ft (1km) NV-208A-M Backbone UTP Multi-pair Multi-channel receiver active hub available in 4, 8, 16 and 32 Channel Monitor NV-214A-M Punch blocks (IDF) DVR/NVR IP Active to Active Application Up to 1 mile (1,6km) NV-653T Backbone UTP Multi-pair Multi-channel receiver active hub available in 4, 8, 16 and 32 Channel Monitor NV-653T Punch blocks (IDF) DVR/NVR IP Passive Product Combinations Transmit/Camera Number Maximum Camera End Receive/MDF Receive/MDF End Passive or Active of Cameras Distance* Transmit Product Passive or Active Passive 1 750ft NV-208A-M or NV-214A-M NV-214A-M Passive Passive 1-4 750ft NV-208A-M or NV-214A-M NV-413A Passive Passive 1-8 750ft NV-208A-M or NV-214A-M NV-813 Passive Passive 1-16 750ft NV-208A-M or NV-214A-M NV-1613 Passive Passive 1-32 750ft NV-208A-M or NV-214A-M NV-3213 Passive Active Product Combinations Passive 1 3,000ft NV-208A-M or NV-214A-M NV-652R Active Passive 1-4 3,000ft NV-208A-M or NV-214A-M NV-452R Active Passive 1-8 3,000ft NV-208A-M or NV-214A-M NV-862 or NV-872 Active Passive 1-16 3,000ft NV-208A-M or NV-214A-M NV-1662 or NV-1672 Active Passive 1-32 3,000ft NV-208A-M or NV-214A-M NV-3262 or NV-3272 Active Active 1-32 5,280ft NV-653T NV-3262 or NV-3272 Active NV-872, NV-1672 and NV-3272 are New! 5 * Any Category UTP Cable
TRADITIONAL CCTV PRODUCT DESCRIPTIONS Single and Four Channel Products NV-208A-M Video Transceiver Single channel passive transceiver Screwless terminal video termination No power required Supports up-the-coax type control signal up to 750ft (225m) NV-214A-M Video Transceiver Single channel passive transceiver Screwless terminal video termination No power required Supports up-the-coax type control signal up to 750ft (225m) Transmit with another passive NVT transceiver up to 750ft (225m) Transmit up to 3,000ft if used with an NVT active receiver Male BNC Transmit with another passive NVT transceiver up to 750ft (225m) Transmit up to 3,000ft (1km) if used with an NVT active receiver Male BNC The NV-214A-M features a 9 inch mini-coax pigtail NV-413A Four Channel Video Transceiver 4-channel passive transceiver with RJ45 or screw terminal video termination Supports up-the-coax type control signal up to 750ft (225m) Distances up to 750ft (225m) when used with an NVT passive transceiver Transmit up to 3,000ft (1km) if used with an NVT active receiver No power required Two NV-413As may be rack mounted using the NV-RM8/10 Rack Panel kit NV-452R Four Channel Video Receiver 4-channel active receiver with RJ45 or screw terminal video input Distances up to 3,000ft (1km) when used with an NVT passive transceiver Distances up to 1 mile (1,6km) when used with an NV-653T transmitter and ground lifting Built-in brightness and sharpness controls Blue power LED, green video receive LED Two NV-452Rs may be rack mounted using the NV-RM8/10 rack panel kit Power supply not included Requires floating 24VAC/DC NV-652R Video Receiver Single channel active receiver with screw terminal video input Use with an NVT passive transceiver at distances up to 3,000ft (1km) Distances up to 1 mile (1,6km) when used with an NV-653T transmitter and ground lifting Built-in brightness and sharpness controls Blue power LED, green video receive LED Power supply not included Requires floating 12-24VAC/DC Up to 10 NV-652Rs may be rack mounted using the NV-RM8/10 Rack Panel Kit NV-653T Video Transmitter Full-motion CCTV video at distances up to 5,280ft/1 mile (1,6km) when used with active NVT receiver or hub and ground lifting Three-position distance range switch Blue power LED, green active LED Power supply not included Requires floating 24VAC/DC 6
TRADITIONAL CCTV PRODUCT DESCRIPTIONS Passive Hub Products Full Enclosure Models Supports RJ45 or screw terminal video termination Use with another passive transceiver for distances up to 750ft (225m) Use with an NVT active receiver for distances up to 3,000ft (1km) No power required Supports up-the-coax type control signal up to 750ft (225m) Includes one 2ft coax jumper per channel, rackmount hardware and screw terminal adaptors (RJ45A) NV-813 Eight Channel Passive Transceiver Hub NV-1613 Sixteen Channel Passive Transceiver Hub Video Output NV-RJ45A Adapter Video Output Male RJ45 to screw-terminals Use with NVT hubs that have RJ45 video ports Heavy duty design assures reliable connections Included as an accessory on all NVT Hubs NV-3213 Thirty-Two Channel Passive Transceiver Hub Note: All Full Enclosure Models measure 19 wide, 1.7 high, 8.125 deep (482mm wide, 43mm high, 206mm deep) Video Output Stub Hub Enclosure Models Supports RJ45 or screw terminal video termination Use with another passive transceiver for distances up to 750ft (225m) Use with an NVT active receiver for distances up to 3,000ft (1km) No power required Supports up-the-coax type control signal up to 750ft (225m) Includes rackmount hardware and screw terminal adaptors (RJ45A) Note: NV-813S and NV-1613S Stub Hubs measure 19 wide x 1.7 high x 0.8 deep (482mm wide x 43mm high x 20mm deep) NV-3213S Stub Hub measures 19 wide x 1.7 high x 1.8 deep (482mm wide x 43mm high x 46mm deep) NV-813S Eight Channel Transceiver Hub Video Output NV-1613S Sixteen Channel Transceiver Hub Video Output NV-3213S Thirty-Two Channel Transceiver Hub Video Output NEW! 7
TRADITIONAL CCTV PRODUCT DESCRIPTIONS Manual Equalization Active Receiver Hubs NV-862 Eight Channel Receiver DA Hub 8-channel active receiver supports RJ45 or screw terminal video termination Use with an NVT passive transceiver for distances up to 3,000ft (1km) Use with an NVT active transmitter for distances up to 1 mile (1,6km) High-Density 19 1U high enclosure features 8 ports Four BNC outputs per channel Built-in brightness and sharpness controls Blue Power LED, green video receive LED and ground lifting Includes (8) 2-ft coax jumper cables, rack mount hardware and (2) screw terminal adaptors (NV-RJ45A) High Frequency Low Frequency Video Output (1:4) NV-1662 Sixteen Channel Receiver DA Hub 16-channel active receiver hub supports RJ45 or screw terminal video termination Use with an NVT passive transceiver at distances up to 3,000ft (1km) Use with an NVT active transmitter at distances up to 1 mile (1,6km) High-Density 19 1U high enclosure features 16 ports Two BNC outputs per channel Built-in brightness and sharpness controls Blue Power LED, green video receive LED and ground lifting Includes (16) 2-ft coax jumper cables, rack mount hardware and (4) screw terminal adaptors (NV-RJ45A) High Frequency Low Frequency Video Output (1:2) NV-3262 Thirty-Two Channel Receiver Hub 32-channel active receiver hub supports RJ45 or screw terminal video termination Use with an NVT passive transceiver at distances up to 3,000ft (1km) Use with an NVT active transmitter at distances up to 1 mile (1,6km) High-Density 19 1U high enclosure features 32 ports Built-in brightness and sharpness controls Blue Power LED, green video receive LED and ground lifting Includes (32) 2-ft coax jumper cables, rack mount hardware and (8) screw terminal adaptors (NV-RJ45A) High Frequency Low Frequency Video Output (1:1) NV-RJ45A Adapter Male RJ45 to screw-terminals Use with NVT hubs that have RJ45 video ports Heavy duty design assures reliable connections Included as an accessory on all NVT Hubs 8
NVT INTRODUCES DIGITALEQ T M New! DigitalEQ TM Active Hubs HUBS NEW! NV-872 Eight Channel DigitalEQ TM Receiver DA Hub Per channel fully automatic digital signal distance equalization and polarity correction Use with an NVT passive transceiver for distances up to 3,000ft (1km) Use with an NVT active transmitter for distances up to 1 mile (1,6km) Four distribution amplifier video outputs per channel Supports screw-terminal or RJ45 UTP video inputs High-Density 19 1U high enclosure and ground lifting Includes (8) 2-foot (60cm) coax jumper cables, rack mount hardware and (2) screw terminal adaptors (NV-RJ45A) Video Output (1:4) NV-1672 Sixteen Channel DigitalEQ TM Receiver DA Hub Per channel fully automatic digital signal distance equalization and polarity correction Use with an NVT passive transceiver at distances up to 3,000ft (1km) Use with an NVT active transmitter at distances up to 1 mile (1,6km) Two distribution amplifier video outputs per channel Supports screw-terminal or RJ45 UTP video inputs High-Density 19 1U high enclosure and ground lifting Includes (16) 2-foot (60cm) coax jumper cables, rack mount hardware and (4) screw terminal adaptors (NV-RJ45A) NEW! Video Output (1:2) NV-3272 Thirty-Two Channel DigitalEQ TM Receiver Hub Per channel fully automatic digital signal distance equalization and polarity correction Use with an NVT passive transceiver at distances up to 3,000ft (1km) Use with an NVT active transmitter at distances up to 1 mile (1,6km) Supports screw-terminal or RJ45 UTP video inputs High-Density 19 1U high enclosure and ground lifting Includes (32) 2-foot (60cm) coax jumper cables, rack mount hardware and (8) screw terminal adaptors (NV-RJ45A) NEW! Video Output (1:1) NV-RJ45A Adapter Male RJ45 to screw-terminals Use with NVT hubs that have RJ45 video ports Heavy duty design assures reliable connections Included as an accessory on all NVT Hubs 9
PVD TM HYBRID CCTV CABLING BENEFITS AND APPLICATION SOLUTIONS Uses cable plant of the future vs. coax Run only one CAT5 4-pair to each camera location to transmit power, video and data Power cameras at distances beyond PoE PVD TM system integrates within a structured cabling environment Uses EIA/TIA 568B standard pin-outs Analog camera choices significantly out number IP camera choices and are less than half the cost Analog cameras with analog video transmission and NVR/DVR/Encoders provide the best of both worlds UTP video signals can share the same pathways as communication networks with no impact on one another High-resolution video 24x7x365 without impacting the LAN Provides a migration path to IP Typical Power and Video Application using AC-DC Converter with Power Supply Cable Integrator Hub 12 VDC Camera RJ45 Wall Jack AC-DC power converter NEW! NV-226J-PV RJ45 Wall Jack 110 Patch Panel Integrated PVD power with NV-16PS10-PVD Power Supply Integrator Hub NEW! NV-1672 or NV-1662 UTP Active Receiver DA Hub Video Monitor DVR / Encoder / NVR IP Integrated PVD TM with Power Supply Passive Receiver Hub NV-216A-PV 24 VAC Camera RJ45 Wall Jacks 110 Patch Panel NV-16PS13-PVD or NV-8PS13-PVD Power Supply Passive Receiver Hub NV-218A-PVD Data Video Monitor DVR / Encoder / NVR IP Integrated PVD TM with Power Supply Cable Integrator Hub NV-216A-PV 24 VAC Camera RJ45 Wall Jacks 110 Patch Panel Data Video 110 Patch Panel NEW! NV-1672 or NV-1662 UTP Active Receiver DA Hub NV-218A-PVD NV-16PS10-PVD Power Supply Cable Integrator Hub Data DVR / Encoder / NVR Video IP Monitor Optional Jack and 110 Patch Panel at this location to meet EIA/TIA 568B cabling standard. 10
PVD TM PRODUCTS NV-216A-PV Single Channel Video Transceiver Male BNC connector supports on-camera mounting Single channel Power-Video transceiver with RJ45 jack Male BNC video and 18 AWG power connections Compatible with NVT s PVD architecture and EIA/TIA568B Video distances up to 750ft (225m) when used with another passive transceiver Video distances up to 3,000ft (1km) with an NVT active receiver Supports up-the-coax type control signal up to 750ft (225m) when used with a passive transceiver NV-218A-PVD Single Channel Video Transceiver Single channel Power-Video-Data transceiver with RJ45, BNC and screwless video terminals Compatible with NVT s PVD architecture and EIA/TIA568B Mini-coax pigtail supports in-camera mounting in most dome cameras Video distances up to 750ft (225m) when used with another passive transceiver Video distances up to 3,000ft (1km) with an NVT active receiver Supports up-the-coax type control signal up to 750ft (225m) when used with a passive transceiver NEW! NV-226J-PV Single Channel Video Transmitter +12VDC Converter Converts 24 VAC to 12 VDC at up to 400 ma to power cameras at long distances Male BNC connector supports camera mounting RJ45 jack compatible with NVT s PVD architecture and EIA/TIA 568B Power distances up to 2,000ft Video distances up to 3,000ft (1km) with an NVT active receiver NV-704J-PVD Four Channel Cable Integrator 4-Channel Power-Video-Data Cable Integrator with RJ45 video termination Connectivity for up to four cameras, each via a single RJ45 4-pair cable Use with the NV-218A-PVD, NV-216A-PV, or NV-226J-PV at the camera EIA/TIA 568B compatible Uses any third-party Class 2 UL power supply to power cameras via UTP over significant distances Cable management solution from the camera to the wiring closet and on to the Control Room Wall-mountable; rack-mountable using the NV-RM8/10 panel NV-716J-PVD Sixteen Channel Cable Integrator 16-Channel Power-Video-Data Cable Integrator with RJ45 video termination Connectivity for up to sixteen cameras, each via a single RJ45 4-pair cable Use with the NV-218A-PVD, NV-216A-PV, or NV-226J-PV at the camera EIA/TIA 568B compatible Uses any third-party Class 2 UL power supply to power cameras via UTP over significant distances Cable management solution from the camera to the wiring closet and on to the Control Room 1U high; 1" deep; wall or rack-mountable 11
PVD TM POWER SUPPLY HUBS Multichannel Power Supply Cable Integrator Hubs Provides Class 2 SELV camera power, pass through video and telemetry data connection from 4 16 cameras, each via a single RJ45 4-pair UTP cable Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B Independently selectable 24 or 28 VAC with 1 Amp max per channel Automatic-reset fault protection, transient protection Individually floating outputs ensure total ground-loop immunity Diagnostic LEDs show load/no load, miswires and overload conditions Use with the NV-216A-PV, NV-218A-PVD or the NV-226J-PV transceiver at the camera and passive or active receivers at the control room Power cameras via UTP over significant distances 1 U high; 12 deep; wall, desk or rack-mountable New! NV-4PS10-PVD Four Channel Power Supply Cable Integrator Hub Power LED Individual Channel Diagnostic LEDs PVD Camera port RJ45 568B compatible 3 position 24VAC- OFF-28VAC NV-16PS10 Sixteen Channel Power Supply Cable Integrator Hub Data Telemetry from control room NEW! 4-Channels video output to control room Power LED Individual Channel Diagnostic LEDs 3 position 24VAC-OFF-28VAC PVD Camera port RJ45 568B compatible 16-Channels Video output to control room Data Telemetry from control room Multichannel Power Supply Passive Receiver Hubs Provides Class 2 SELV camera power, pass through video and telemetry data connection from 8 16 cameras, each via a single RJ45 4-pair UTP cable Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B Independently selectable 24 or 28 VAC with 1 Amp max per channel (10 Amp aggregate) Automatic-reset fault protection, transient protection Individually floating outputs ensure total ground-loop immunity Diagnostic LEDs show load/no load, miswires and over load conditions Use with the NV-216A-PV, NV-218A-PVD or the NV-226J-PV transceiver at the camera for video distances up to 750ft (1km) Power cameras via UTP over significant distances 1 U high; 12 deep; wall, desk or rack-mountable NV-8PS13-PVD Eight Channel Power Supply Cable Integrator Hub Power LED Individual Channel Diagnostic LEDs 8-Channels Video output to control room PVD Camera Port RJ45 568B compatible Data Telemetry from control room NV-16PS13-PVD Sixteen Channel Power Supply Cable Integrator Hub Power LED Individual Channel Diagnostic LEDs PVD Camera port RJ45 568B compatible 3 position 24VAC-OFF-28VAC 3 position 24VAC-OFF-28VAC 16-Channels Video output to control room Data Telemetry from control room 12
PVD TM HYBRID PRODUCT SELECTION Passive to Passive Structured Cabling CCTV Product Combinations Number of Cameras Maximum Video Distance Camera End Transmit IDF Product Midspan MDF Product Receive Surge Suppression Ground Loop Isolation RF Noise Immunity Crosstalk Immunity No Power Required Distance Equalization Lifetime Warranty Up-the-coax PTZ 1 750ft NV-218A-PVD 1-4 750ft NV-4PS10-PVD or NV-704J-PVD NV-413A 1-8 750ft 1-8 750ft NV-4PS10-PVD (2 each) or NV-704J-PVD (2 each) NV-813 NV-8PS13-PVD 1-16 750ft 1-16 750ft 1-32 750ft Number of Cameras Camera End Transmit NV-16PS10-PVD or NV-716J-PVD NV-16PS10-PVD (2 each) or NV-716J-PVD (2 each) Passive to Active Structured Cabling Product Combinations Maximum Video Distance IDF Product Midspan NV-1613 NV-16PS13-PVD NV-3213 MDF Product Receive Surge Suppression Ground Loop Isolation RF Noise Immunity Crosstalk Immunity No Power Required Distance Equalization Lifetime Warranty Up-the-coax PTZ 1-4 3,000ft 1-8 3,000ft 1-16 3,000ft 1-32 3,000ft NV-226J-PV, NV-4PS10-PVD, NV-8PS13-PVD, NV-16PS13-PVD, NV-872, NV-1672, and NV-3272 are New! NV-4PS10-PVD or NV-704J-PVD NV-4PS10-PVD (2 each) or NV-704J-PVD (2 each) NV-16PS10-PVD or NV-716J-PVD NV-16PS10-PVD (2 each) or NV-716J-PVD (2 each) NV-452R NV-862 or NV-872 NV-1662 or NV-1672 NV-3262 or NV-3272 Power required at receive end only RS-422 or 485 only Power Distance Charts Standard Distance NV-216A-PV at the 24 VAC Camera Power Supply Voltage 24 VAC 28 VAC B&W Camera 24 VAC, 100 ma, 2.4 W 2-pair 24 AWG 807ft (246m) 2,100ft (640m) 2-pair 23 AWG (Cat6) 1,018ft (310m) 2,647ft (1km) Color Camera 24 VAC, 200 ma, 4.8 W 2-pair 24 AWG 2-pair 23 AWG (Cat6) Color Camera 24 VAC, 300 ma, 7.2 W 2-pair 24 AWG 2-pair 23 AWG (Cat6) 404ft (123m) 509ft (155m) 268ft (82m) 339ft (103m) 1,050ft (320m) 1,324ft (403m) 699ft (213m) 882ft (269m) Pan/Tilt/Zoom NV-218A-PVD at the 24 VAC Camera Power Supply Voltage 24 VAC 28 VAC P/T/Z Camera 24 VAC, 1 Amp, 24 W 2-pair 24 AWG 2-pair 23 AWG (Cat6) 90ft (27m) 110ft (33m) 210ft (64m) 265ft (80m) Extended Distance NV-226J-PV at the 12 VDC Camera Power Supply Voltage B&W Camera 12 VDC, 100 ma, 1.2 W 2-pair 24 AWG 2-pair 23 AWG (Cat6) Color Camera 12 VDC, 200 ma, 2.4 W 2-pair 24 AWG 2-pair 23 AWG (Cat6) Color Camera 12 VDC, 300 ma, 3.6 W 2-pair 24 AWG 2-pair 23 AWG (Cat6) Color Camera 12 VDC, 400 ma, 4.8 W 2-pair 24 AWG 2-pair 23 AWG (Cat6) 24 VAC 3,000ft (1km) 3,000ft (1km) 1,569ft (478m) 1,978ft (602m) 1,046ft (318m) 1,319ft (402m) 784ft (239m) 989ft (301m) 28 VAC 3,000ft (1km) 3,000ft (1km) 2,136ft (650m) 2,693ft (821km) 1,424ft (434m) 1,795ft (547m) 1,068ft (325m) 1,346ft (410m) Notes: Actual distance will depend on the camera s inrush and operating current, minimum operating voltage, and the wire s environmental temperature. Please consult NVT Customer Support for further information. Wire should be Category rated UTP cable. Low-voltage camera power, Video and RS-422 or RS-485 may be sent within the same wire bundle. Do not run 24 VAC or 28 VAC in the same wire bundle with other telecom or datacom signals. However, you can share the same wire/cable tray. 13
MULTIMEDIA PRODUCT OVERVIEW AND PRODUCT APPLICATIONS Multimedia Product Overview The NVT Multimedia product range allows one-way or two-way transmission of real-time color video and audio over Unshielded Twisted-Pair (UTP) telephone wire at extended distances. The product choices allow the installer to select small systems to larger systems capable of short or longer distance transmission and reception. Distances up to 3,000ft can be accommodated with this system. Baseband (composite) signals of any type are supported. The unparalleled interference rejection of the NVT Multimedia product range allow video signals to co-exist in the same wire bundle as CCTV, telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant, leveraging in-house economies. Applications include Security/Surveillance, video distribution, video conferencing, distance learning, video arraignment or visitation. One way short distance Up to 750ft (225m) camera to monitor NV-314A NV-314A Two way short distance Up to 750ft (225m) camera to monitor NV-418A NV-418A One way long distance Up to 3,000ft (1km) camera to monitor NV-314A NV-518A Two way long distance Up to 2,000ft (600m) camera to monitor with cable-flip NV-518A NV-518A For best crosstalk immunity, use Cat5 or better wire for distances greater than 1,000ft. (Or use separate jacketed bundles for transmit and receive paths.) 14
MULTIMEDIA PRODUCTS NV-314A Video/Audio Transceiver Full-motion monochrome or color video and audio at distances up to: -750ft (225m) when used with another passive transceiver -3,000ft (1km) when used with an active receiver such as the NV-518A No power required Supports up-the-coax type control signals RJ45 and RCA jack connections NV-418A Bi-directional Video/Audio Transceiver Dual full-motion monochrome or color video and audio at distances up to: -750ft (225m) when used with another passive transceiver -3,000ft (1km) when used with an active receiver such as the NV-518A No power required Supports up-the-coax type control signals RJ45 and RCA jack connections NV-518A Bi-directional Video/Audio Transceiver Bi-directional full-motion monochrome or color video and audio Distances up to: -2,000ft (600m) when used with another NV-518A Two Way Short Distance Cards NV-418AR Bi-directional Video/Audio Transceiver Card Rack mount version of the NV-418A to be used with the NV-RM15 Dual full-motion monochrome or color video and audio Distances up to: -750ft (225m) when used with another NV-418A Two Way Long Distance Cards Rack mount version of the NV-518A to be used with the NV-RM15 Bi-directional full-motion monochrome or color video and audio Distances up to: -2,000ft (600m) when used with another NV-518A Multi-Channel Rack mount NV-RM15 Rack mount Video/Audio Transceiver System Fifteen channel rack mount Video/Audio Transceiver System Allows the co-location of up to fifteen transceivers in one compact enclosure Brightness and sharpness controls Power LED, and Active LED BNC, 1/4" Phone and RJ45 jack connections and ground lifting Power transformer included RACK MOUNT MULTI-CHANNEL PRODUCTS NV-518AR Bi-directional Video/Audio Transceiver Card No power required Supports up-the-coax type control signals RJ45 and RCA jack connections May be used as dual transmitter or dual receiver and ground lifting Brightness and sharpness controls Power LED, and Active LED BNC, 1/4" Phone and RJ45 jack connections No cooling fans required Power Supply included Transceivers sold separately 15
HIGHEST VIDEO QUALITY AND SYSTEM RELIABILITY UNDER ADVERSE FIELD CONDITIONS nvt.com Corporate Office 4005 Bohannon Drive Menlo Park, CA 94025 USA 800.959.9870 +1 650.462.8100 Office +1 650.326.1940 Fax info@nvt.com nvt.com UK Office NVT House 99 Waldegrave Road Teddington Middlesex TW11 8LA United Kingdom +44 (0) 208.977.6614 Office +44 (0) 208.973.1855 Fax 441-1200-1-B 09/07 uksales@nvt.com nvt.com