MJW28A (NPN) MJW32A (PNP) Preferred Devices Complementary NPN PNP Power Bipolar Transistors These complementary devices are lower power versions of the popular MJW328A and MJW32A audio output transistors. With superior gain linearity and safe operating area performance, these transistors are ideal for high fidelity audio amplifier output stages and other linear applications. Features Exceptional Safe Operating Area NPN/PNP Gain Matching within % from 5 ma to 5 A Excellent Gain Linearity High BVCEO High Frequency Benefits Reliable Performance at Higher Powers Symmetrical Characteristics in Complementary Configurations Accurate Reproduction of Input Signal Greater Dynamic Range High Amplifier Bandwith Applications High End Consumer Audio Products Home Amplifiers Home Receivers Professional Audio Amplifiers Theater and Stadium Sound Systems Public Address Systems (PAs) MAXIMUM RATINGS Rating Symbol Value Unit Collector Emitter Voltage V CEO 26 Vdc Collector Base Voltage V CBO 26 Vdc Emitter Base Voltage V EBO 5. Vdc Collector Emitter Voltage.5 V V CEX 26 Vdc Collector Current Continuous Collector Current Peak (Note ) I C 5 3 Adc Base Current Continuous I B.5 Adc Total Power Dissipation @ T C = P D 5 Watts Operating and Storage Junction Temperature Range T J, T stg 65 to +5 Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected.. Pulse Test: Pulse Width = 5. ms, Duty Cycle < %. C 2 ORDERING INFORMATION Device Package Shipping MJW28A 5 AMPERES COMPLEMENTARY SILICON POWER TRANSISTORS 26 VOLTS 5 WATTS 3 TO 247 CASE 34L STYLE 3 MARKING DIAGRAM BASE MJWxxxxA LLYWW 2 COLLECTOR MJWxxxxA = Device Code xxxx = 28 OR 32 LL = Location Code Y = Year WW = Work Week TO 247 3 EMITTER 3 Units/Rail MJW32A TO 247 3 Units/Rail Preferred devices are recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 25 June, 25 Rev. 2 Publication Order Number: MJW28A/D
THERMAL CHARACTERISTICS Characteristic Symbol Value Unit Thermal Resistance, Junction to Case R θjc.83 C/W ELECTRICAL CHARACTERISTICS (T C = unless otherwise noted) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector Emitter Sustaining Voltage (I C = 3 ma, I B = ) Collector Cutoff Current (V CB = 26 V, I E = ) Emitter Cutoff Current (V EB = 5. V, I C = ) V CEO(sus) 26 V I CBO A I EBO 5. A ON CHARACTERISTICS DC Current Gain (I C =.5 A, ) (I C =. A, ) (I C = 3. A, ) h FE 75 75 75 5 5 5 Collector Emitter Saturation Voltage (I C = 5. A, I B =.5 A) Base Emitter On Voltage (I C = 5. A, ) DYNAMIC CHARACTERISTICS Current Gain Bandwidth Product (I C =. A,, f test =. MHz) Output Capacitance (V CB = V, I E =, f test =. MHz) V CE(sat). V V BE(on).2 V f T 3 MHz C ob 4 pf 6 P D, POWER DISSIPATION (W) 4 2 8 6 4 2. ms DC. ms 5. ms ms 2 4 6 8 2 4 6 T C, CASE TEMPERATURE ( C) Figure. Power Derating. V CE, COLLECTOR EMITTER VOLTAGE (V) Figure 2. Safe Operating Area 2
5 5 V BE(on), BASE EMITTER VOLTAGE (V) h FE, DC CURRENT GAIN C.5. 5 Figure 3. MJW28A DC Current Gain.4.2.8.6 C.4.2.. h FE, DC CURRENT GAIN V BE(on), BASE EMITTER VOLTAGE (V) C.5. 5 Figure 4. MJW32A DC Current Gain 2.4.9.4.9.4 C... Figure 5. MJW28A Base Emitter Voltage Figure 6. MJW32A Base Emitter Voltage V CE(sat), COLLECTOR EMITTER SATURATION VOLTAGE (V). I C /I B = C... Figure 7. MJW28A Saturation Voltage V CE(sat), COLLECTOR EMITTER SATURATION VOLTAGE (V). I C /I B = C... Figure 8. MJW32A Saturation Voltage 3
f T, CURRENT GAIN BANDWIDTH PRODUCT (MHz) 6 5 4 3 2.. Figure 9. MJW28A Current Gain Bandwidth Product f T, CURRENT GAIN BANDWIDTH PRODUCT (MHz) 7 6 5 4 3 2.. Figure. MJW32A Current Gain Bandwidth Product 4
PACKAGE DIMENSIONS TO 247 CASE 34L 2 ISSUE D N A K F 2 PL B 2 3 G D 3 PL W U P Y.25 (.) M Y Q S C T E NOTES:. DIMENSIONING AND TOLERANCING PER ANSI Y4.5M, 982. 2. CONTROLLING DIMENSION: MILLIMETER. MILLIMETERS INCHES L DIM MIN MAX MIN MAX A 2.32 2.8.8 8.3 4 B 5.75 6.26.62.64 Q C 4.7 5.3.85.29 D..4.4.55.63 (.25) M T B M E 2.2 2.6.87.2 F.65 2.3.65.84 G 5.45 BSC.25 BSC H.5 2.49.59.98 J.4.8.6.3 K 2.6 2.83.79.82 L 5.4 6.2.22.244 N 4.32 5.49.7.26 P 4.5.77 Q 3.55 3.65.4.44 U 6.5 BSC.242 BSC J W 2.87 3.2.3.23 H STYLE 3: PIN. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR 5
PowerBase is a trademark of Semiconductor Components Industries, LLC (SCILLC) ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 632, Phoenix, Arizona 8582 32 USA Phone: 48 829 77 or 8 344 386 Toll Free USA/Canada Fax: 48 829 779 or 8 344 3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 8 282 9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2 9 Kamimeguro, Meguro ku, Tokyo, Japan 53 5 Phone: 8 3 5773 385 6 ON Semiconductor Website: Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MJW28A/D