Oven Controlled Crystal Oscillators

Similar documents
Oven Controlled Crystal Oscillators

Oven Controlled Crystal Oscillators

Oven Controlled Crystal Oscillators

Ultra Low Phase Noise VCXO

Key Electrical Specifications Parameters Minimum Typical Maximum Units Notes ppm

Excellent Integrated System Limited

Ultra Low Phase Noise XO / VCXO

SMD TCXO/VCTCXO ASTXR-12 OVERVIEW: ESD Sensitive. Revised: Moisture Sensitivity Level (MSL) 1

2.0 Absolute Maximum Ratings 1 Parameter Min. Max. Unit.

TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR

Frequency Translator / Jitter Attenuator

PECL, LVDS, CMOS Output Low Jitter SMD Crystal Oscillator

Ultra-miniature, Low Power, kHz MEMS Oscillator

Ultra-Low Phase Noise OCXO

32.768kHz IoT Optimized SMD Crystal

RFPT Specifications. SMD Low Acceleration Sensitivity TCXO / TCVCXO. Product description. Applications

Ultra-miniature, Low Power, kHz MEMS Oscillator

Low Power MEMS Jitter Attenuator

Frequency Divider Evaluation Board

Ultra-miniature, Low Power, kHz SMD MEMS Oscillator

Pb RoHS. ASG-D Series; LVDS Output STANDARD SPECIFICATIONS: 7.0 x 5.0 x 1.9mm APPLICATIONS: FEATURES:

Ultra-miniature, Low Power, kHz MEMS Oscillator

PERFORMANCE PLASTIC PACKAGE ULTRA MINIATURE PURE SILICON TM CLOCK OSCILLATORS ASDMP Series

RFID Chip Antenna ACAJ-110- ACAJ-110-T Moisture Sensitivity Level (MSL) MSL = 1. SPECIFICATION Frequency Range. 868/915MHz VSWR

OX-200 Oven Controlled Crystal Oscillator

TX-801 Temperature Compensated Crystal Oscillator

Model 149 Stratum 3E, 9x14 mm OCXO

Ultra-Low Phase Jitter SMD Clock Oscillator

High Performance MEMS Jitter Attenuator

Performance Specifications

ClearClock Ultra-Low Jitter & Power Optimized 5.0 x 3.2 mm XO. (3): Stability over OTR. D: ±15ppm over -20 C to +70 C F: ±20ppm over -40 C to +85 C

Parameter Conditions & Remarks Min Typical Max Unit. Warm up Steady 25 C Load Output to Ground pf

Parameter Conditions & Remarks Min Typical Max Unit C 3.3V V Warm up 2.5 Steady 25 C 1.

TX-500 Temperature Compensated Crystal Oscillator

Performance Specifications

Performance Specifications

STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO

CLEARCLOCK POWER OPTIMIZED 0.12ps 5x7mm XO

OX-171 Oven Controlled Crystal Oscillator

Performance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve

Performance Specifications. Frequency Stabilities 1 ( 10 & 20 MHz)

CXOQ CXOQ 1.8V CXOQ 2.5V CXOQ 3.0V CXOQ 3.3V

HCMOS 7 x 5mm 1.8V Oscillator

IQXT IQXT is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package.

ICS LOW EMI CLOCK GENERATOR. Description. Features. Block Diagram DATASHEET

DS1091L Automotive Temperature Range Spread-Spectrum EconOscillator

O C X O Oven Controlled Crystal Oscillators

2.0 Absolute Maximum Ratings 1 Parameter Min. Max. Unit. a. Storage temperature C b. Supply voltage (VDD) V

QTCT220 SERIES 2.0 x 2.5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 52.

DTCXO Temperature Compensated Real-Time-Clock Module with SPI bus

DTCXO Temperature Compensated Real-Time-Clock Module with SPI bus

OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator

Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator. E/D or NC

QTCT570 SERIES 5 x 7mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to MHz Description

HMC6380LC4B. WIDEBAND VCOs - SMT. Electrical Specifications, T A. Typical Applications. Features. General Description. Functional Diagram

QTCT350 SERIES 3.2 x 5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 5.0Vdc MHz to 52.

2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Nominal frequency range

OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator

Oven Controlled Crystal Oscillator OCXO SERIES 8100

PSE Technology Corporation

TX-700 Temperature Compensated Crystal Oscillator

EX-421 Evacuated Miniature Crystal Oscillator

Features. o HCSL, LVPECL, or LVDS o HCSL/LVPECL, HCSL/LVDS, LVPECL/LVDS. o Ext. Industrial: -40 to 105 C o o. o 30% lower than competing devices

OX-221 Oven Controlled Crystal Oscillator

OD100LP-Series Low Phase Noise

MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator

IQXT IQXT-205-3

MX-600 Microprocessor Controlled Crystal Oscillator High Precision

OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator

Preliminary. 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Frequency 8 to 1500 MHz 2.2 Operating Temperature Range

IoT OPTIMIZED LOW PROFILE QUARTZ CRYSTAL

IoT OPTIMIZED LOW PROFILE QUARTZ CRYSTAL

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

TX-705 Temperature Compensated Crystal Oscillator

IoT OPTIMIZED LOW PROFILE QUARTZ CRYSTAL

PSE Technology Corporation

Oven Controlled Crystal Oscillator OCXO SERIES IEEE 1100

C MHz 52 MHz

VCC1 VCC1. CMOS Crystal Oscillator. Description. Features. Applications. Block Diagram. Output V DD GND E/D. Crystal. Oscillator

MX-041 Oven Controlled Crystal Oscillator

LVPECL 5 x 3.2mm 1.8V Oscillator

MEMS Oscillator, Low Power, LVCMOS, MHz to MHz

PARAMETER SYMBOL CONDITIONS VALUE UNIT

PSE Technology Corporation

AMJD-SERIES. fout = 27MHz, VDD=1.8V,

Solder Dip Option: T = Standard S = Solder Dip (*) Package

ICS722 LOW COST 27 MHZ 3.3 VOLT VCXO. Description. Features. Block Diagram DATASHEET

OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator

LVDS 5 x 3.2mm 2.5V Oscillator

MD-403 I2C InterfaceOven Controlled Crystal Oscillator

OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator

VX-505 Voltage Controlled Crystal Oscillator Extended Temperature

TS3004. A 1.55V to 5.25V, 1.9µA, 3.3µs to 233s Silicon Timer DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATION CIRCUIT

DSC400. Configurable Four Output, Low Jitter Crystal-less Clock Generator. General Description. Block Diagram. Applications.

PSE Technology Corporation

VVC4 Voltage Controlled Crystal Oscillator

OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator

PS-701 SAW Oscillator

Model: FXTC-HE73 Series Preliminary

Solder Dip Option: T = Standard S = Solder Dip (*) G = Solder Dip (*) Package

Transcription:

Moisture Sensitivity Level (MSL) 1 OVERVIEW: Abracon s AOCJYR series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology, patented by Rakon. This Advanced Technology coupled with Rakon s proprietary manufacturing techniques enable ±10 stability over -20 C to +70 C, with typical short-term aging of better than ±2 per day. Sophisticated Integrated Oven Control architecture ensures fast warm-up time, while minimizes initial power consumption to 350mW typical at 25 C. Further, the integration of critical functionality improves overall product reliability by reducing FIT rates 10x relative to traditional discrete OCXOs. The AOCJYR series is offered in Industry leading 9.7 x 7.5 x 4.3 mm SMT package, while AOCJYR-DIL is available in 21.7 x 13.08 x 8.6 mm leaded hermetic package. FEATURES: APPLICATIONS: Stratum 3 Small Cells Switches and Routers Time & Frequency References SyncE and IEEE 1588 Compact package size: 9.7 x 7.5 x 4.3mm Frequency stability over temperature as low as ±25 over -40 to +85 C Low power consumption High reliability STANDARD SPECIFICATIONS: Parameters Nominal Frequency Supply Voltage (Vdd) Input Power (warm-up) Input Power (steady-state) Operable Temperature Range Storage Temperature Range Initial Frequency Tolerance @25 C At time of shipment Reflow Shift Frequency Stability over Operating Temperature Range in Still Air Minimum Typical 3.135 10.000 3.3 1000 Units -40 400 85-55 +125 ºC ±0.5 See Note 1 ±1 After 1hr recovery ±25 Ref. to (FMAX+FMIN)/2 ±2 / C 3.465 <±4 Free-run Accuracy ±4.6 Stability vs. Supply Voltage Change ±10 Load Coefficient ±10 Frequency Aging (per day) <±2 Notes MHz V mw mw ºC Slope in Still Air Holdover Stability Maximum @25 C still air Temperature ramp 1 C/minute max. 24hrs, temperature variation ±1 C. See Note 2 All causes, 20 years life, ref. to nominal frequency. Stratum III compliant ±5% variation in Vdd, ref. to freq. @Vdd=3.3V ±5pF variation in load, ref. to freq. @ 15pF load See Note 2

STANDARD SPECIFICATIONS CONTINUED: Parameters Minimum Typical Maximum Units Notes Frequency Aging First Year ±1 (long-term stability) 20 Years ±3 Warm-up Time <3 minute See Note 3 Root Allan Variance <1x10-10 @25 C, τ=1.0s Acceleration Sensitivity <2 /g Gamma vector of all 3 axes from 30Hz to 1500Hz Output Type LVCMOS High-level Output Voltage (V OH ) 90%*Vdd V Low-level Output Voltage (V OL ) 10%*Vdd V Output Load 10 15 20 pf Rise and Fall Time (t r, t f ) 4 ns Duty Cycle Phase Noise @ 10MHz Carrier 45 55 % @ 1 Hz offse -72 dbc / Hz @ 10 Hz offset -98 dbc / Hz @ 100 Hz offset -123 dbc / Hz @ 1,000 Hz offset -142 dbc / Hz @ 10,000 Hz offset -149 dbc / Hz @ 100,000 Hz offset -150 dbc / Hz @ 1,000,000 Hz offset -150 dbc / Hz Note: 1. The characteristics of the component may be temporarily affected by the processes of assembly and soldering. The frequency specifications apply 48 hours after assembly. Nominal conditions apply unless otherwise stated. 2. After 30 days of continuous operation. 3. Time needed for frequency to be within ±20 reference to frequency after 1hour, at 25 C. Parameter is assembly and operating history dependent CROSS REFERENCE INFORMATION: AOCJYR-10.000MHZ-M5625LF is equivalent to Rakon P/N M5625LF. CERTIFIED tel 949-546-8000 fax 949-546-8001 www.abracon.com

PART IDENTIFICATION: AOCJYR- 10.000MHz -M5625LF Packing Blank: Bulk T: Tape & Reel (1k/reel) OUTLINE DIMENSION: Recommended Land Pattern Pin 1 2 3 4 Function NC Ground RF-output Supply Voltage Note: For correct operation, decouple the supply voltage with a 10µF capacitor close to the oscillator. Dimension: mm

REFLOW PROFILE: TAPE & REEL: Packaging: 1000pcs/reel Reel Size: Ø13 Dimension: mm ATTENTION: Abracon Corporation s products are COTS Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ABRACON: -T