Pb RoHS. ASG-D Series; LVDS Output STANDARD SPECIFICATIONS: 7.0 x 5.0 x 1.9mm APPLICATIONS: FEATURES:

Transcription

1 APPLICATIONS: Networking, SONET/SDH WiMax / WLAN Computing Phase Locked Loo Direct Digital Synthesis (DDS) DSL/ADSL Base Terminal Stations FEATURES: ASG series is a High Performance crystal based oscillator; available either as an XO or a CXO LCMOS output, MHz to 250MHz - refer to ASG-C data sheet LDS output, MHz to 1.50GHz - refer to ASG-D data sheet LPECL output, MHz to 1.50GHz - refer to ASG-P data sheet Offered with either 2.50 or 3.30 bias voltage Quick turn, 1~5 business days for small quantity orders STANDARD SPECIFICATIONS: Parameters dd = 3.3 dd = 2.5 Frequency Range: Operating Temperature: Storage Temperature: Overall Frequency Stability: Initial Set Tolerance Stability over operating temperature 25ºC over -years Frequency variation over supply voltage change (±5%) Frequency variation over load variation (15pF ± 5%) dd = 3.3 Supply oltage (dd): dd = 2.5 dd = 3.3 Input Current: dd = 2.5 Differential Output oltage OD Magnitude Change Offset oltage LDS Output OS Magnitude (Out & Out ): Change Duty Cycle Rise Time Fall Time Start-up Time: Enable/Disable Function : control Range Frequency Pull Control Port Bandwidth Phase jitter RMS [ See Note #2 tjit(ϕ) ] Integer Mode Fractional Mode Minimum Maximum Units MHz MHz C C ma ma Frequency dependent Frequency dependent m OD m ΔOD OS m % ms ΔOS ODCLDS tr tf olts khz For CXO Typical < ±1.00 < ± < 25 < / < "1" (IH 0.7*dd) or Open: Oscillation "0" (IL < 0.3*dd) : High Z 0.00 dd ±50 Notes See Note # 1 < kHz to 20MHz < kHz to 20MHz Note #1: Inclusive of initial tolerance at 25ºC±3ºC, operating temperature range, input voltage variation, load variation & aging. Note #2: The rms jitter over 12kHz to 20MHz Bandwidth is dependent on the carrier and whether or not the final frequency is achieved without engaging the Fractional Mode

2 OERALL SYSTEM BLOCK DIAGRAM PHASE NOISE & JITTER CHARACTERISTICS MHz Carrier 1.50GHz Carrier

3 FREQUENCY STABILITY S. TEMPERATURE FREQUENCY PULLING S. CONTROL OLTAGE (CXO MODE) PART IDENTIFICATION: ASG - D - Fixed or Pull-able X = Fixed Oscillator = CXO - - MHz - Operating oltage 3.30 = A 2.50 = B Frequency in MHz Please specify the Frequency in MHz e.g MHz Packaging Blank = Bulk T = Tape & Reel MARKING: Top Line: Bottom Line: ASG GYWW WW = Work Week Pin# 1 Identifier Year Code (B=2011, C=2012, etc.) Internal Tracking Code

4 OUTLINE DIMENSIONS: Pin # Pin Description For CXO configuration 1 2 oltage Control for CXO Output Enable (OE) GND 6 dd Pin # Pin Description For XO configuration 1 Output Enable (OE) 2 N/C for XO GND 6 dd REFLOW PROFILE:

5 TAPE & REEL: T= Tape and reel (2,000pcs/reel) ATTENTION: Abracon Corporation s products are COTS Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.