EZYMESH CABLE MESH EZYMESH 50 500 00 150 PRODUCT DETAILS EzyStrut EzyMesh provides premium performance in commercial and light industrial applications. Strong, versatile and easy to install EzyMesh is complemented with all the accessories you need. Your EzyMesh lengths can be created into bends, tees, risers and crosses to suit the application. Tested to NEMA Standard VE1-2002. STANDARD LENGTH 5 W ORDERING DETAILS Supplied per length AVAILABLE FINISH Pre-Galvanised Zinc Plated Hot Dip Galvanised Stainless ORDERING CODE EM...G EM...Z EM...H EM...S EzyMesh is available in stainless steel against firm orders only. Cable Mesh 5 Cable Tray Fittings 3 Brackets 2 Fasteners 1 Channel/Strut SPAN METRE Ordering Code EM50 EM00 Cable Laying Width - W (mm) 150 50 500 00 LOAD RATING AND DEFLECTION 2.5 2.0 1.5 2kg 3kg 1kg kg LOAD PER METRE Deflection 21mm Cable Laying Depth (mm) Deflection 1mm Deflection mm Overall Width (mm) 10 0 520 20 Side Rail Height (mm) 5 5 5 5 5 EzyMesh Cable Mesh has been tested in accordance with NEMA standards. Loading applies to 00mm wide section and loading may vary for other widths. A guide to deflection for continuous runs has been included for easy reference, however it should be noted that the positioning of splice joints and loading techniques can significantly impact upon the actual deflection..1
ACCESSORIES PRODUCT DETAILS A full range of EzyMesh accessories is available to complement the system and provide easy on site installation. EzyMesh accessories are common for all mesh widths and can be used to make tees, bends, risers, and crosses. ORDERING DETAILS Supplied per length/individually AVAILABLE FINISH Hot Dip Galvanised Zinc Plated ORDERING CODE EM...H EM...Z EMBC EZYMESH CUTTER EMSB EZYMESH BOLT JOINER KIT Wt: 0.kg M x 30 Coach Bolt pressed steel, and supplied with Grade. fasteners for assembly. EMHD Wt: 0.kg EZYMESH HOLD DOWN BRACKET pressed steel. Thickness: 2.0mm Screw Diameter: M Working Load: 350kg Safety Factor: 3:1 Slipping Force: 0kg, H M Hex Nut EMWB EZYMESH WALL MOUNT Wt: 0.0kg To be used on mesh up to 150mm in width. Fasteners required: 1 x M pressed steel to AS15. EMS EZYMESH SIDE JOINER Wt: 0.1kg EMSC EZYMESH BOTTOM JOINER Wt: 0.01kg.2 Span (m) 3.0 2.5 2.0 1.5 Max. Allowable Load (kg/mtr) 2 3 1 pressed steel to AS15. See assembly method, page. for required quantities to be used with side joiners. Supplied individually Span (m) 3.0 2.5 2.0 1.5 Max. Allowable Load (kg/mtr) 2 3 1 pressed steel to AS15. See assembly method, page. for required quantities to be used with side joiners. To be used for straight joints only in conjunction with side joiners. Supplied individually
ACCESSORIES EMT EZYMESH TRAPEZE BRACKET Ordering Code EMT150 EMT300 EMT50 EMT500 EMT00 EMT3000 Use M Threaded Rod Width (mm) 250 00 550 50 00 3000 50 pressed steel to AS15. Load Capacity (kg) EMC EZYMESH CANTILEVER BRACKET Ordering Code EMC150 EMC300 EMC50 EMC500 EMC00 L Length - L (mm) 200 350 50 550 00 steel to AS15. Thickness: 2.0mm Hole Diameter: 11mm Hole Spacing: 50mm Working Load: 350kg Safety Factor: 3:1, H Weight (kg) 1.3 1. 2.2 2.3 2. Cable Mesh 5 Cable Tray Fittings 3 Brackets 2 Fasteners 1 Channel/Strut.3
JOINING A STRAIGHT LENGTH EzyMesh EM300 EM50 EM00 Side Joiners Bottom Joiners 1 x EMSC C C C 3 x EMSC Order joiners separately for joining Cable Mesh lengths Bend tab by levering down on the screwdriver. ASSEMBLING A WALL MOUNT ( ONLY) Bend tab inward by levering across with the screwdriver. ASSEMBLING A TRAPEZE AND CANTILEVER Bend tab by levering down on the screwdriver..
EzyMesh EM300 EM50 EM00 Cut Outs 3 5 BEND EM300 BEND EM50 BEND Bolt Joiner Kits 3 5 BENDS 3 Attach Bolt Joiners 2 Radius 0 Radius Cable Mesh 5 Cable Tray Fittings 3 Brackets 2 Fasteners 1 Channel/Strut 300 Radius BEND EM00 BEND 2 Radius 00 Radius.5
Radius 150 300 50 00 Cut Outs Note: Illustrations below show an EM50 as typical. EXT. RISERS EXTERNAL RISER 150 RADIUS 150 Radius EXTERNAL RISER 300 RADIUS 300 Radius EXTERNAL RISER 50 RADIUS 50 Radius EXTERNAL RISER 00 RADIUS 00 Radius.
Radius 150 300 50 00 Cut Outs Note: Illustrations below show an EM50 as typical INTERNAL RISER 150 RADIUS INTERNAL RISER 300 RADIUS INT. RISERS 150 Radius 300 Radius Cable Mesh 5 Cable Tray Fittings 3 Brackets 2 Fasteners 1 Channel/Strut INTERNAL RISER 50 RADIUS 50 Radius INTERNAL RISER 00 RADIUS 00 Radius.
EzyMesh EM300 EM50 EM00 TEE Bolt Joiner Kits TEES 3 Attach Bolt Joiners EM300 TEE EM50 TEE TEE EM00 TEE.
EzyMesh EM300 EM50 EM00 CROSS EM300 CROSS EM50 CROSS Bolt Joiner Kits 12 12 1 CROSSES 3 Attach Bolt Joiners Cable Mesh 5 Cable Tray Fittings 3 Brackets 2 Fasteners 1 Channel/Strut CROSS EM00 CROSS.