Electric rotary drilling machines Fein Electric rotary drilling machines Makita Electric rotary drilling machines Bosch Electric rotary drilling machines Bosch Electric rotary hamerdrilling machines Fein Cordless rotary drills Fein electric rotary drilling machines 230V 50Hz 560340 6mm 500 BOP 6 Speed 0-2.700 rpm full load. Single speed. Torque 3.5 Nm Fast running for metal construction jobs. High precision metal drill-chuck. Self tightening drill chuck. 560341 6mm 500 BOP 6 + carry case Same as 560340 but in a 560342 10mm 500 BOP 10 Speed 0-900 rpm full load. Single speed. Torque 5 Nm Fast running for metal construction jobs. High precision metal drill-chuck. Self tightening drill chuck. 560343 10mm 500 BOP 10 + carry case Same as 560342 but in a 560354 10mm 500 BOP 10-2 Speed 0-460 / 0-1.350 rpm full load. Two-speed. Torque 20/7 Nm Universal drill for a wide range of uses ideal for steel and stainless steel. High precision metal drill-chuck, self tightening. 560354B 10mm 500 BOP 10-2 + carry case Same as 560354 but in a Pag 54-02
560352 13mm 550 BOP 13-2 Speed 0-440 / 0-1.300 rpm full load. Two-speed. Torque 20/7 Nm Universal drill for a wide range of uses ideal for steel and stainless steel. High precision metal drill-chuck, self tightening. 560352B 13mm 550 BOP 13-2 + carry case Same as 560352 but in a 560345 16mm 1200 BOS 16 Speed 0-520 rpm full load. Torque 50 Nm (with slipping clutch) Powerful drilling machine with 6-electronic speed setting for use in metal construction. Good speed stablity for steady drilling. Clockwise and reverse running for thread cuts up to M12. High precision metal drill-chuck. Self tightening drill chuck. Speed controlled tacho-electronics. Spade handle for optimum power transfers. Collar for use with drill jig. 560346 16mm 1200 BOS 16-2 2-speed drilling machine Speed 0-520 / 0-1.600 rpm full load Torque 50/16 With slipping clutch Rest same as 560345 560347 10mm 500 BWP 10 Speed 0-1.030 rpm full load. Torque 8 Nm Angle drill with good speed stability for use in hard to reach places. Clockwise and reverse running for thread cuts up to M6. Metal drill chuck, key type. Tapered drill shaft. High concentricity. 54-02.1
Makita electric rotary drilling machines 230V 50Hz 540714 10mm 530 6408 Speed 0-2.500 no-load Single speed with speed control Light weight 1,4 kilo Drill chuck 1-10mm Belt clip Reversible left/right 540716 6,5mm 370 DP 2010 Speed 0-4.200 no-load Electronic speed control Light weight 1,0 kilo Drill chuck 6,5mm with key Reversible left/right Softgrip Special for drilling small rivet holes Keyang Electric rotary drills 230V 50Hz Nummer Cap. Watt Type 54K1040 13mm 650 DMV13K Speed 0-2.800 rpm no load Impacts 0-44.800 no load Adjustable speed Separate whipping and drill setting LED illumniation Max. capacity in concrete 13.0mm Max. capacity in steel 10.0mm Weight 1,65 kilo Complete with plastic carry case and depth stop. Nummer Cap. Watt Type 54K1041 16mm 720 DMV16K Speed 0-3.000 rpm no load Impacts 0-48.000 no load Traploos snelheid bepalen. Adjustable speed LED illumination Max. capacity concrete 16.0mm Max. capacity steel 12.0mm Keyless steel drill chuck 13.0mm Weight 1,9 kilo Complete with plastic carry case and depth stop. Bosch electric rotary drilling machines 230V 50Hz 54BO0831 10mm 600 GBM 10 RE Speed 0-2.600 no-load Nominal torque 20.0Nm Compact and light weight 1,7 kilo machine for medium duty jobs. Power control for exact drilling. Drill chuck 1.0-10mm Belt clip. 54-02.2
54BO0832 10mm 500 GBM 10-2 RE 2-speed Speed 0-1.150/2.100 no-load Maximum torque 9.5/5.0Nm Compact and light weight 1,7 kilo machine for medium duty drilling jobs. Power control for exact drilling. Drill chuck 1.0-10mm 54BO0834 13mm 750 GBM 13-2 RE 2-speed Speed 0-1.000/3.000 no-load Maximum torque 39.5/12.5Nm Compact and light weight 2,4 kilo machine for medium duty drilling jobs. Power control for exact drilling. Drill chuck 1.0-13mm Overload coupling protects machine and user. 54BO0835 16mm 1050 GBM 16-2 RE Speed 600/1.450 no-load Maximum torque 50/22Nm Weight 3,7 kilo For heavy duty use. Drill chuck 1.0-16mm with key. Reversible left/right, especially for removing foundation drills. Usefull for paint and plaster stirring. Syngronized pull wedge drive with 2 speeds, can be switched over when machine is running. Bosch electric impact drilling machines 230V 50Hz 54BO0841 10mm 600 GSB 13 RE Speed 0-2.800 no-load Nominal torque 1.8Nm, and at soft screw connections 10.8Nm Weight 1,8 kilo Drill chuck 1,5-13mm Cap. Concrete 13mm Cap. Bricks 15mm 54-02.3
54BO0842 13mm 750 GSB 16 RE Speed 0-2.800 no-load Nominal torque 2.3Nm, and at soft screw connections 18Nm Weight 2,2 kilo Drill chuck 1,5-13mm with Autolock Cap. Concrete 16mm Cap. Bricks 18mm 54BO0851 16mm 1500 GSB 162-2 RE Speed 0-7.50 / 0-2.550 no-load Nominal torque 17/5,0Nm, and at soft screw connections 50/14.5Nm Weight 4,8 kilo High torque for heavy duty applications. Drill chuck 3.0-16mm with key Restart protection in case of power failure. Robust side handle with softgrip. Suitable for diamant drills. Cap. Concrete 82/68mm Cap. Bricks 162/68mm 54BO0845 16mm 1100 GSB 21-2 RE Speed 0-900 / 0-3.000 no-load Nominal torque 9.6/3.2Nm, and soft screw connections 40/14.5Nm Weight 2,9 kilo Drill chuck 1,5-13mm with Autolock Cap. Concrete 22/13mm Cap. Bricks 24/16mm Suitable for hollow concrete drills and hole saws. Also suitable fro screwing and stirring. 54BO0861 16mm 1300 GSB 21-2 RCT Speed 0-900 / 0-3.000 no-load Nominal torque 7.8/2.6Nm, and soft screw connections 43/20.5Nm Weight 2,9 kilo Drill chuck 1,5-13mm with Autolock Constant electronic and torque control. Cap. Concrete 22/13mm Cap. Bricks 24/16mm Suitable for hollow concrete drills and hole saws. Also suitable fro screwing and stirring. 54-02.4
Fein Cordless rotary drills Number Type Voltage 54F71050162000 ABOP 6 SELECT 18V Fast running single-speed (battery-powered) up to 6mm in steel for metal construction. Fein SoftGrip handle. Speed full load 0-2.900 rpm Speed no load 0-3.350 rpm Torque max output 4 Nm stall torque 7 Nm Capacity steel, stainless steel max. Ø6mm Capacity alu max. Ø10mm Capacity wood max. Ø20mm. Drill chuck clamping width 0,5-10mm Thread of spindle 1/2-20 UNF Number Type Voltage 54F71050262000 ABOP 10 SELECT 18V Fast running single-speed (battery-powered) up to 10mm in steel for on-site installation. Fein SoftGrip handle. Speed full load 0-1.100 rpm Speed no load 0-1.250 rpm Torque max. output 11 Nm stall torque 19 Nm Capacity in steel, stainless steel max. Ø10mm Capacity in Alu max. Ø15mm Capacity in wood max. Ø30mm. Drill chuck clamping 1,5-13mm Tapping M6, Collar Ø43mm Thread of spindle 1/2-20 UNF Number Type Voltage 54F71050362000 ABOP 13 SELECT 18V Fast running two-speed (battery-powered) up to 13mm for steel and stainless steel. Fein SoftGrip handle. Speed full load 0-500/0-1.500 rpm Speed no load 0-1.580/0-1.760 rpm Torque max output 24/8 Nm stall torque 39/13 Nm Capacity in steel, stainless steel max. Ø13/10mm Capacity in Alu max. Ø16/10mm Capacity in wood max. Ø37/27mm. Drill chuck clamping 1,5-13mm Tapping M10, Collar Ø43mm Thread of spindle 1/2-20 UNF 54-02.5
Number Type Voltage 54F71050462000 AWBP 10 SELECT 18V Extremely small cordless angle drill. Fein SoftGrip handle. Drill shaft cone (B10) Speed full load 0-1.260 rpm Speed no load 0-1.370 rpm Torque max output 9,5Nm stall torque 17 Nm Capacity in steel, stainless steel max. Ø10mm Capacity in Alu max. Ø15mm Capacity in wood max. Ø25mm. Drill chuck clamping 0,8-10mm Tapping M6 Drill shaft B10 cone Number 54F92604173020 54F92604171020 Description Battery 18,0 V 5,0 Ah Battery 18,0 V 2,5 Ah 54F92604129010 Rapid charger ALG 50 For all Fein Li-ion batteries Charging time from 35 minutes 54F92604200020 Battery LED-lamp ALED 12-18 V Compact and durable battery LED-lamp with swivel mounted lamp head. Compatible with all 12/14/18 V Fein Li-ion batteries. Inl. hook for attaching the lamp. 900 Lux very bright daylight. Extreme lightweight 130 gram. 2 levels brightness. 54F33901131080 Carry case Plastic carry case with plastic inlay inside dimensions 470x275x116mm Useful for ABOP6-ABOP10-ABOP13 54F92604300030 Fein SELECT+ starter set Set of 2 Li-ion 18V 5,0Ah batteries and a rapid battery charger ALG50. Batteries with charge indicator. 54F92604300040 Fein SELECT+ starter set Set of 2 Li-ion 18V 2,5Ah batteries and a rapid battery charger ALG50. Batteries with charge indicator. 54-02.6