TECHNICAL INFORMATION Models No.
|
|
- Mark Norton
- 5 years ago
- Views:
Transcription
1 TECHNICAL INFORMATION Models. Description 6207D, 6217D, 6237D,, 9.6V, 12V, 14.4V Cordless Driver Drills 10mm (3/8") 12V, 14.4V, 18V Cordless Driver Drills 13mm (1/2") CONCEPT AND MAIN APPLICATIONS These six tools have been developed as upgraded successors to the existing Makita tools of Model 6203D series, and features increased power and enhanced mechanical parts. One of the remarkable features is the repalceable armature for reduced repair cost. Listed below are variations of these new models. W L PRODUCT P 1 / 13 H 10mm (3/8") 13mm (1/2") Model. Battery Battery Type Charger 6207DWDE 9134 (9.6V, ) / 2pcs Ni-MH DC DWDE 1234 (12V, ) / 2pcs Ni-MH DC DWDE 1434 (14.4V, ) / 2pcs Ni-MH DC1413 WAE 1222 (12V, 2.0Ah) / 2pcs Ni-Cd DC1413 WDE 1234 (12V, ) / 2pcs Ni-MH DC1413 WFE 1235 (12V, 3.0Ah) / 2pcs Ni-MH DC1413 WAE 1422 (14.4V, 2.0Ah) / 2pcs Ni-Cd DC1413 WDE 1434 (14.4V, ) / 2pcs Ni-MH DC1413 WFE 1435 (14.4V, 3.0Ah) / 2pcs Ni-MH DC1413 WAE 1822 (18V, 2.0Ah) / 2pcs Ni-Cd DC1803 WDE 1834 (18V, ) / 2pcs Ni-MH DC1803 WFE 1835 (18V, 3.0Ah) / 2pcs Ni-MH DC1803 Dimensions: mm ( " ) Model. Length ( L ) Width ( W ) Height ( H ) Length ( L ) Width ( W ) Height ( H ) 10mm (3/8") 6207D 6217D 6237D 233 (9-1/8) 77 (3) (9-9/16) 233 (9-1/8) (3-11/16) (9-9/16) 13mm (1/2") 233 (9-1/8) (3-11/16) 247 (9-3/4) Model. (9-9/16) (3-11/16) (9-9/16) (9-9/16) (3-11/16) 247 (9-3/4) (9-9/16) (3-3/4) 251 (9-7/8) Specification See page 2. Standard equipment * Battery cover... 2 pcs. * + - Bit pc. * Plastic carrying case... 1 pc. < te > The standard equipment for the tool shown may differ from country to country. Optional accessories Model. Battery Charger 6207D 9120, 9122, 9133, 9134, 9135, 9135A DC1413, DC1439, DC1803, DC1822, DC D 1220, 1222, 1233, 1234, 1235, 1235A DC1413, DC1439, DC1803, DC D 1420, 1422, 1433, 1434, 1435 DC1413, DC1439, DC1803, DC , 1222, 1233, 1234, 1235, 1235A 1420, 1422, 1433, 1434, 1435 DC1413, DC1439, DC1803, DC , 1833, 1834, 1835 DC1803, DC1822 DC1413, DC1439, DC1803, DC1822
2 P 2 / 13 Specification Specification Voltage (V) Model. Chuck capacity (mm [inch]) load speed (rpm = min -1) Declutching torque (N.m [kgf.cm / ft.lbs]) Max. fastening torque (N.m [kgf.cm/ in.lbs]) Electric brake Torque settings Variable speed control Mechanical 2-speed Reverse switch High Low Hard joint Soft joint Net weight with battery: Kg [lbs] 50 [500/ 440] 20 [200/ 180] 10 mm 6207D 6217D 6237D [1/32-3/8] Drilling capacity Steel 10 [3/8] (mm [inch]) Wood 25.4 [1] 32 [1-1/4] 0-1, [10-60 / ] 60 [600/ 530] 25 [250/ 220] 16 stages ( + drill mode) 65 [650/ 580] 30 [300/ 270] 1.7 [3.7] 1.9 [4.2] 2.0 [4.4] 60 [600/ 530] 25 [250/ 220] 13 mm [1/16-1/2] 25.4 [1] 32 [1-1/4] 38 [1-1/2] 0-1, [10-60 / ] 65 [650/ 580] 30 [300/ 270] 16 stages ( + drill mode) 80 [800/ 710] 35 [350/ 310] 2.0 [4.4] 2.1 [4.6] 2.4 [5.3] Features and benefits New Gear Assembly Prevents gears from falling out of place. Prevents clutch from actuating accidentally in drilling mode. Change Lever for Drill/ Screwdriver Mode Working mode can be changed simply by one action. High/ Low Speed Change Lever More Powerful Output Realized by stronger motor power plus more efficient power transmission by new gear assembly New Separable Type 31 Motor 1. Uses strong magnet for increased power. 2. Construction without motor case allows; Light motor body. Big diameter fan for increased cooling efficiency Independently replaceable armature Adjusting Ring For 16 stage torque settings Metal Gears for Enhanced Gear Assembly All the gears in gear assembly are made of metal. [Model 6207D] Externally Accessible Brushes Palm Fitting Soft Grip For controlled operation and operator comfort Bit Holder * For storing a driver bit te: The feature with a mark* is as same as tools of Model 6203D series.
3 P 3 / 13 Comparison of products Specification Model. 6217D/ 6237D/ 6207D Makita 6213D/ 6313D 6233D 6333D 6203D 6343D A-9.6 A-12 A Voltage (V) Chuck capacity (mm [inch]) 10 [3/8] 10 [3/8]/ 10 [3/8]/ 10 [3/8] 10 [3/8]/ 10 [3/8]/ 10 [3/8] 10 [3/8] 10 [3/8]/ Hard joint Soft joint Evaluation on old standard Externally accessible brushes 50 [440] 20 [180] [530] 25 [220] ---- load speed ( rpm=min -1 ) Length (mm [inch]) Width (mm [inch]) High Low Dimensions Max. fastening torque (N.m [in.lbs]) Aluminum gear housing 65 [580] 30 [270] [710] 35 [310] 25 [220] 14 [120] [200] 31 [270] 17 [150] 26 [230] 35 [310] 22 [200] 31 [275] 50 [440] 25 [220] 45 [400] (t available) 23 [200] 38 [340] 20 [180] 35 [310] 41 [360] 22 [200] 38 [334] 50 [440] 30 [270] 45 [400] Side grip Soft grip handle Torque settings Height (mm [inch]) 233 [9-1/8] 77 [3] [9-9/16] 233 [9-1/8]/ [9-9/16] [3-11/16] [9-9/16] 16 stages + drill mode 0-1, [9-1/8]/ [9-9/16] [3-11/16] 247 [9-3/4] [9-9/16] [3-3/4] 251 [9-7/8] 0-1, [9-1/8] 77 [3] 241 [9-1/2] 17 stages + drill mode 0-1, [9-1/8]/ [9-9/16] [3-11/16] 241 [9-1/2] 0-1, [9-1/8]/ [9-9/16] [3-11/16] 246 [9-11/16] 16 stages + drill mode 0-1, [10] [3-3/4] 249 [9-3/4] 17 stages + drill mode 0-1, (t available) 252 [9-7/8] 83 [3-1/4] 235 [9-1/4] 23 stages + drill mode 0-1, [9-7/8] 83 [3-1/4] 235 [9-1/4] 252 [9-7/8] 86 [3-3/8] 235 [9-1/4] Net weight (with battery): kg [lbs] 1.7 [3.7] 1.9 [4.2]/ 2.0 [4.4] 2.0 [4.4]/ 2.1 [4.6] 2.4 [5.3] 1.7 [3.7] 1.9 [4.2]/ 2.0 [4.4] 2.0 [4.4]/ 2.1 [4.6] 2.5 [5.5] 1.5 [3.4] 1.9 [4.2] 2.2 [4.9] 2.5 [5.5]
4 Comparison of products Time Required for Driving a Screw/ Drilling a Hole P 4 / 13 The Number of Screws Driven/ Holes Drilled on a Single Full-Charge 9.6V Models (Numbers on the bars below are relative values when the capacities of 6203D are indexed at.) Test 1: Drilled holes in 38mm (1-1/2") thick Spruce; with 7/8" Spade bit ; on High speed drill mode. 6207D 5.9sec 6207D holes 6203D 6203D 50 Fast Test 2: Drove 1/4" x 3" Lag bolts ; into Spruce; on Low speed screwdriver mode. 6207D 7.3sec 6207D screws 6203D 6203D 50 Fast 12V Models (Numbers on the bars below are relative values when the capacities of 6313D are indexed at.) Test 1: Drilled holes in 38mm (1-1/2") thick Spruce; with 7/8"Spade bit ; on High speed drill mode sec holes 6316D 6313D A B-1 C D 6313D A-12 B-1 C-1 1.7Ah Ah Ah Fast Test 2: Drove 1/4" x 3" Lag bolts ; into Spruce; on Low speed screwdriver mode. 6316D 5.9sec 135 screws 6316D 6313D A-12 B-1 C D A Ah 85 B-1 C-1 2.0Ah 1.7Ah 50 Fast
5 P 5 / 13 Time Required for Driving a Screw/ Drilling a Hole Test 3: Drilled holes in 38mm (1-1/2") thick Spruce; with 1" Auger bit The Number of Screws Driven/ Holes Drilled on a Single Full-Charge ; on Low speed drill mode. 5.9sec 6316D 6313D A-12 B-1 C D D A-12 B-1 C-1 1.7Ah Ah 1.7Ah 64 holes 50 Fast 14.4V Models (Numbers on the bars below are relative values when the capacities of 6333D are indexed at.) Test 1: Drilled holes in 38mm (1-1/2") thick Spruce; with 7/8" Spade bit ; on High speed drill mode sec 91 screws 6336D 6336D 6333D 6333D Ah B B-2 2.4Ah C-2 C-2 1.7Ah 75 Competitor D D-1 Competitor D D-1 3.0Ah 50 Fast Test 2: Drove 1/4" x 3" Lag bolts ; into Spruce; on Low speed screwdriver mode. 5.9sec screws 6336D 6336D 6333D 6333D 1.7Ah Ah 115 B-2 B Ah 80 C-2 C-2 Competitor D Competitor D D-1 D-1 3.0Ah Fast
6 P 6 / 13 Time Required for Driving a Screw/ Drilling a Hole Test 3: Drilled holes in 38mm (1-1/2") thick Spruce; with 1" Auger bit The Number of Screws Driven/ Holes Drilled on a Single Full-Charge ; on Low speed drill mode. 5.9sec holes 6336D 6336D D B-2 C-2 Competitor D D D B-2 C-2 Competitor D D-1 1.7Ah 2.4Ah 1.7Ah Fast 3.0Ah V Models (Numbers on the bars below are relative values when the capacities of 6343D are indexed at.) Test 1: Drilled holes in 38mm (1-1/2") thick Spruce; with 7/8" Spade bit ; on High speed drill mode. 2.5sec holes 6343D D 2.4Ah 1.3Ah Fast Test 2: Drove 1/4" x 3" Lag bolts ; into Spruce; on High speed screwdriver mode. 6343D 6343D 50 Test 3: Drove 3/8" x 3-1/2" Lag bolts sec sec Fast Fast 6343D 1.3Ah 45 Few Few screws 2.4Ah ; into Spruce; on Low speed screwdriver mode. 6343D 2.4Ah 1.3Ah screws Test 4: Drilled holes in 38mm (1-1/2") thick Spruce; with 1" Auger bit ; on Low speed drill mode. 6343D sec Fast 6343D 1.3Ah Ah holes
7 Hint on setting torque P 7 / 13 Selecting Optimum Torque The graph below shows the relation between the torque-setting number on adjusting ring and fastening torque (= declutching torque), and the chart below the graph shows what number on the adjusting ring is optimum for the screw to drive. Please refer to them when selecting torque; they will help you choose an optimum torque-setting number to suit the screw to drive. (The graph and the chart are available to all tools of Model 6207D series.) te: Actual fastening torque is not on the theoretical line of the graph. Advantages of 16 Torque Settings Optimum torque can be set for every size of machine screw from M4 to M6. Wood screws can be driven with their heads flush with each other more precisely than ever even though the screws vary in thickness or length, or the wood workpieces vary in hardness. [ft.lbs] (kgf.cm) N.m [5.1] (70) 7 [4.4] (60) 6 [3.6] (50) 5 Fastening torque (Declutching Torque) [3.0] (40) 4 [2.2] (30) 3 [1.5] (20) 2 [0.7] (10) 1 [0] (0) 0 The Torque-setting Number on Adjusting Ring Recommended Size of Screw Wood screw Machine screw M4 M5 Hard wood (pine, etc.) Soft wood (lauan, etc.) ø3.5 x 22 ø4.1 x 38 ø3.5 x 22 ø4.1 x 38 M6 ø5.1 x 50 ø5.1 x 50
8 Repair P 8 / 13 < 1 > Disassembling of drill chuck See Fig. 1. For replacing gear assembly, drill chuck has to be disassembled. Take the following steps. 1. Firmly hold.1r139 "Drill chuck extractor" with vise. And lock spindle with the drill chuck extractor. 2. Open the jaws of drill chuck fully and take off flat head screw M6 x 22 by turning clockwise. 3. Disassemble drill chuck with hex wrench inserted into drill chuck by turning the hex wrench anti-clockwise. If drill chuck is damaged, firmly hold the drill chuck with vise and turn spindle with wrench anti-clockwise as illustrated in fig. 1A. 1R139 Drill chuck extractor Fig. 1 Fig. 1A < te > For replacing other than gear assembly, it is not necessary to disassemble drill chuck. < 2 > Disassembling housing See Fig Take off brush holder caps and carbon brushes. 2. Slide mode change lever to the drill mode side. 3. Unscrew the following screws. * Tapping screw PT 3 x 16 : 9 pcs. * Pan head screw M 4 x 22 : 1 pc. Mode change lever Tapping screw bind PT 3x16 : 9 pcs. Brush holder cap Slide mode change lever to the drill mode side. Carbon brush Brush holder cap Carbon brush Pan head screw M4 x 22 : 1 pc. Fig. 2
9 Repair < 3 > Disassembling gear assembly and motor section See Fig. 3. Lifting up mode change lever, separated change ring, gear assembly, yoke, armature and endbell from housing as a set. Remove as a set without separating from each other. P 9 / 13 Yoke Mode change lever Change ring Gear assembly Armature Endbell < te in disassembling > Lock lever Compression spring 2 Mode change lever Gear assembly Torsion spring 2 Remove so careful that the following springs do not spring out. Compression spring 2: installed in mode change lever. Torsion spring 2: fixing mode change lever on gear assembly < 4 > Assembling leaf spring See Fig. 5. Assemble leaf spring to housing L as illustrated in Fig. 4. Fig. 3 Leaf spring Housing L Fig. 4 Housing L < 5 > Assembling change ring When separating gear assembly from housing, change ring can easily slip off from gear assembly. Re-assemble change ring to gear assembly as follows. 1. Align the widest bulge of spring holder to the bulge of gear assembly by turning spring holder. 2. Assemble change ring by aligning the bulge of change ring's edge to the portion of gear assembly marked with circle by the bulge of gear assembly. Bulge of gear assembly The widest bulge of spring holder Bulge of change ring's edge Change ring Fig. 5 Bulge of gear assembly Bulge of change ring's edge
10 Repair P 10 / 13 < 6 > Assembling speed change lever 1. Before assembling, make sure that 2 compression springs are installed in the speed change lever. See fig Assemble speed change lever to the boss of gear assembly as illustrated in Fig. 6A. 3. After assembling, slide the speed change lever to the change ring side or yoke assembling side and keep its slid position. 2 compression springs For assembling speed change lever, approach from yoke assembling side. And press speed change lever to the boss of gear assembly. Change ring Speed change lever Boss of gear assembly Yoke assembling side Change ring side Fig. 6 Yoke assembling side Fig. 6A < 7 > Assembling mode change lever and housing 1. Hitch the hook of tension spring 2 to gear assembly and another hook to mode change lever as illustrated in Fig Assemble mode change lever to gear assembly by inserting the boss of mode change lever into the groove of gear assembly as illustrated in Fig Assemble motor section (yoke, armature and endbell) to gear assembly. Assemble them to housing L as illustrated in Fig. 7A. Tension spring 2 Mode change lever Motor section (yoke, armature and endbell) Housing L Fig. 7 Aligning the cut portion of yoke with the boss of housing L, assemble gear assembly and motor section to housing L. Fig. 7A
11 Repair P 11 / Assemble compression spring 2 to lock lever as illustrated in Fig. 7B. Pulling mode change lever to the another side of housing L along the surface of gear assembly, insert the lock lever into mode change lever as illustrated in Fig 7C. Compression spring 2 Fig. 7B Locl lever Pull mode change lever to the another side of housing L in order to assemble lock lever to it. Housing L Fig 7C 5. Pushing lock lever, slide mode change lever to the another side of housing L, and assemble housing R to housing L by fastening screws as illustrated in Fig 7D. Tapping screw bind PT 3x16 : 9 pcs. Pushing lock lever, slide mode change lever to the housing L side. Pan head screw M4 x 22 : 1 pc. Housing L Fig 7D
12 Repair P 12 / 13 < 8 > Assembling drill chuck See Fig Firmly hold.1r139 "Drill chuck extractor" with vise. And lock spindle with the drill chuck extractor. 2. Hold.1R298 "Hex socket" with the jaws of drill chuck firmly and turn the hex socket with.1r223 "Torque wrench" clock wise. <te> Pre-setting the fastening torque for torque wrench : 49 N.m N.m 3. Fasten flat head screw M6 x 22 by turning it anti-clockwise..1r224 Ratchet head.1r298 Hex socket Flat head screw M6 x 22 1R139 Drill chuck extractor.1r223 Torque wrench Fig. 8
13 Circuit diagram P 13 / 13 Endbell complete M1 Switch M2 Color index of lead wires Black Red B B Battery holder Wiring diagram Armature fan Endbell Yoke Lead wire (red) Rib Lead wire (black) Switch Lead wire (red) Lead wire (black) Battery holder
TECHNICAL INFORMATION Models No. Description
TECHNICAL INFORMATION Models No. Description KP0810, KP0810C Power Planer 82mm (3-1/4") W PRODUCT P 1 /11 CONCEPT AND MAIN APPLICATIONS Model KP0810 features the following user-friendly advantages: *Left
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION P 1 / 11 Model No. Description CONCEPT AND MAIN APPLICATIONS Specification Standard equipment TCT saw blade... 1 Rear table set (exclusively Europe, Turkey, South Africa..1 2704 This
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More informationREPAIR INSTRUCTIONS. Cat. No Cat. No MILWAUKEE ELECTRIC TOOL CORPORATION. SDS Max Demolition Hammer. SDS Max Rotary Hammer
Cat. No. 9-0 SDS Max Demolition Hammer Cat. No. -0 SDS Max Rotary Hammer MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON ROAD BROOKFIELD, WISCONSIN 00-0 8-9-0 d 000 8-9-0 d Special Tools Require Forcing
More informationELECTRIC TOOL CORPORATION
Cat. No. -0 / Hex Demolition Hammer Cat. No. 0-0 Spline Rotary Hammer MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON ROAD BROOKFIELD, WISCONSIN 00-0 -9-00 d 000 -9-00 d SpecialTools Require Forcing discs
More informationPOWER TOOLS D 10VF D 10VG D 13VF D 13VG. 10 mm DRILLS D 10VF D 10VG. 13 mm DRILLS D 13VF D 13VG. Except USA and Canada
MODELS D 10VF D 10VG D 13VF D 13VG 10 mm DRILLS D 10VF D 10VG 13 mm DRILLS D 13VF D 13VG Except USA and Canada POWER TOOLS TECHNICAL DATA AND SERVICE MANUAL D LIST Nos. 0194, 0195, 0196, 0197 Aug. 2001
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. Description CONCEPT AND MAIN APPLICATIONS Specification BCL140, BCL180 Cordless Cleaner Models BCL140 and BCL180 are handy cordless cleaners of cloth filtration type powered
More informationImpact Wrench MODEL TW1000. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH Impact Wrench MODEL TW000 00605 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More information2705 03-09 99 98 97 82 88 89 83 84 85 86 87 101 103 100 106 81 71 105 104 73 74 75 76 77 78 80 79 57 62 58 56 63 65 66 67 68 64 69 70 59 60 61 31 30 29 32 34 35 41 40 42 36 37 38 39 43 4445 46 33 55 54
More informationFMT 250; FMT 250Q; FMT 250QSL. Repair instructions FMT 250Q / FMT 250QSL. Page 1 of 30
Repair instructions FMT 250 FMT 250Q / FMT 250QSL Page 1 of 30 Contents 1. Models described 2. Technical data 3. Notes and requirements 4. Tools required 5. Lubricants and auxiliary substances required
More informationTABLE OF CONTENTS REQUIRED TOOLS
TABLE OF CONTENTS SECTION SECTION TITLE PAGE NO. 1 2 3 4 5 Assembling Mounting Structure Installing Bicycle Supports Mounting Rack to Wall Adding Sections Customizing Rack Configuration REQUIRED TOOLS
More informationImpact Wrench. 19 mm (3/4 ) MODEL 6906
Impact Wrench 9 mm (3/4 ) MODEL 6906 002290 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More informationO-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List
Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs
More informationWSG 8-115; 8-125; P; WSG ; WSG P; WSG PS; WSG P; WSG 15-70Inox
Repair instructions Page of 47 Contents. Models described 2. Technical data 3. Notes and requirements 4. Tools required 5. Lubricants and auxiliary substances required 6. Disassembly 7. Assembly 8. Connection
More informationBig Block Installation Manual For Systems without A/C
Big Block Installation Manual For Systems without A/C Billet Specialties, Inc. 500 Shawmut Ave. La Grange, IL 60526 Tech Line (708) 588-0505 Fax (708) 588-7181 Hardware List For Chevrolet Big Block Tru
More informationHDL(M)6 Nut/Screw Assembly
HDL(M)6 Nut/Screw Assembly Remove, repair, and reassemble the nut and screw assembly in your HDL series double lock vise. In these instructions when we refer to the front of the vise or nut/screw assembly,
More informationWritten By: Thomas Opsomer
Power Drill Chuck Replacement This guide will help you to replace the chuck on almost any corded or cordless drill. Written By: Thomas Opsomer ifixit CC BY-NC-SA www.ifixit.com Page 1 of 13 INTRODUCTION
More informationTIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
More informationPage 1. SureMotion Quick-Start Guide: LARSACC_QS 1st Edition - Revision A 03/15/16. Standard Steel Bolt/Screw Torque Specifications
R K C T I Repair Kit Product Compatibility Repair Kit # Linear Actuator Assembly # LARSACC-013 LARSACC-014 LARSD2-08T12BP2C (12-in travel) LARSD2-08T24BP2C (24-in travel) C P I R K 1 ea Ball Screw with
More information2015 Q1 Lifetime W NEW PRODUCTS arranty
NE 2 W 01 PR 5 Q OD 1 UC TS Lifetime Warranty aster Tool Set & Tool Storge 09015 09523E 09902E 15PC. 3/DR. SOCKET SET (ETRIC) 14PC. 3/DR. SOCKET SET (ETRIC) 2 PC. 3/DR. EXTRA LONG EXTENSION SET 12991E
More informationRECIPRO SAW MODEL JR3000V 01-03
RECIPRO SAW MODEL JR3000V 0-03 3 6 7 5 67 8 9 3 0 4 6 66 8 9 0 7 7 3 4 5 6 65 7 8 9 3 3 70 33 34 36 6 37 38 39 4064 4 4 6 59 58 47 46 57 56 48 49 55 5 53 4 73 74 Item Part Qty. Item Part Qty... Used Description..
More informationMODELS 49 RA 49 RAZ 49 RAC
General Safety and Maintenance Manual MODEL grinder featuring a rear exhaust. Model Number Exhaust Direction REAR Throttle Type (L) Lever or (K) Safety Lever Speed 12000 to 14000 R.P.M (13500rpm is standard)
More informationTorqueMaster Replacement Spring
TorqueMaster Replacement Spring Installation Instructions NOTE: Use these installation instructions in conjunction with the TorqueMaster Repair / Replacement Spring Program literature. Copyright 999 Wayne-Dalton
More informationACCESS COVER INSTALLATION INSTRUCTIONS (Kit #601 for 2006 Honda Ridgeline)
ACCESS COVER INSTALLATION INSTRUCTIONS (Kit #601 for 2006 Honda Ridgeline) NOTE TO INSTALLER: IMPORTANT READ BEFORE ATTEMPTING INSTALLATION. Allow extra time, up to 2 hours to install this cover. Disassembly
More informationDisassembly Instructions - 1 hp. Planetary Reduction Gears
Disassembly Instructions - 1 hp. Planetary Reduction Gears Important: Use these instructions along with the tool parts page or manual. Notice: To avoid damage to the motor housing, use the Special Repair
More informationCSS Central Mount System
CSS-20 Installation Manual CSS-20 Safety Notifications Below are the installation instructions for the CSS-20-2 Long Span Beam Mounting System. Please read these safety notifications prior to beginning
More informationTapping Screw (W/Flange) 46 Cord Armor 47 Tube (D) 48 Cord. 45 Cord Clip. Tapping Screw (W/Flange) 10 Gear Cover Ass'y. 12 Socket (B) Ass'y
W8VB The exploded assembly drawing should be used only for authoized service center. W8VB Item No. Part time 1 Magnetic Hex. Socket 2 Sub Stopper 3 O-Ring (S-16) 4 Locator (A) 5 Lock Sleeve (A) 6 O-Ring
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DS4012 DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Drill DS402 05402 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DS402 Capacities Steel 3 mm Wood
More informationImpact Wrench MODEL 6905B MODEL 6906
ENGLISH Impact Wrench MODEL 6905B MODEL 6906 005305 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E936 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2004 4 20 (E1) 1 2 3 23 24 7 8 9 10 6 5 4 15 11 16 12 13 12 14 18 25 26 27 28 29 30 19 17 1 9 11 16 21 624 20 22 39 40 41 42 35
More informationUniversal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining
Machining and workholding Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining Obstruction free 5-side machining More and more companies are investing
More informationLS7 CHEVROLET TOP MOUNT Installation Manual For Systems with A/C #13460 / #13490
LS7 CHEVROLET TOP MOUNT Installation Manual For Systems with /C #13460 / #13490 PLESE RED LL INSTRUCTIONS EFORE INSTLLING NY COMPONENTS OF THE TRU TRC SERPENTINE SYSTEM Important: Thoroughly read the instructions,
More informationDIY KIT DIY KIT. User Manual CTK
DIY KIT DIY KIT CTK 035 User Manual -1- Dear Customer Congratulations! You have taken the correct decision in choosing CUMI POWER TOOLS CUMI POWER TOOLS is manufactured by Carborundum Universal Limited,
More information1904, 1904Pg, 1904PgSB, and 1906SB High Capacity Ratchet Knockout Drivers
INSTRUCTION MANUAL 1904, 1904Pg, 1904PgSB, and 1906SB High Capacity Ratchet Knockout Drivers Read and understand all of the instructions and safety information in this manual before operating or servicing
More informationUSSC LLC 4 ONE LLC FIELD MODIFICATION INSTRUCTIONS
1 OF 17 A 1. PURPOSE: Instructions for in field replacement of 9004 mechanical suspension top pan 2. SCOPE: 9004 mechanical suspension with legacy two point LX back frame and current LX back frame 3. PROCEDURE:
More informationINSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET
HIGH EDGE 2 1/4"(57mm) 03079400070 INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET IMPORTANT: THIS LOCK IS NON-HANDED. LOCK IS FACTORY PACKED PREADJUSTED FOR 1³ ₄" (45mm)
More informationOperating instructions. Fine boring head Ø3-88 with digital display
Operating instructions Fine boring head Ø3-88 with digital display English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety
More informationImpact Wrench 6904VH 6905H INSTRUCTION MANUAL
ENGLISH (Original instructions) INSTRUCTION MANUAL Impact Wrench 6904VH 6905H 005299 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE
More informationSmall Block Ford. 289 / 302 / 351W / 5.0 Installation Manual For Systems with A/C #13600 / #13620
Small Block Ford 289 / 302 / 351W / 5.0 Installation Manual For Systems with A/C #13600 / #13620 Billet Specialties, Inc. 500 Shawmut Avenue. La Grange, Illinois 60526 Tech Line (708) 588-0505 Fax (708)
More informationParts Breakdown LS1212. Page 1 of 6 2/13
Page 1 of 6 2/13 Page 2 of 6 2/13 Products with multiple versions are listed in subsiding order with the newest version on top not indented Fig # Part ID Part Name Quantity 1 911373-5 P.H. SCREW M6X50,
More informationBosch Drill Driver Teardown
Bosch 36618 Drill Driver Teardown Overview of how to take apart a Bosch 36618 cordless drill driver. I will be taking apart the drill and cleaning bits and pieces as I go. I am not fixing or repairing
More informationSAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" Page 20
SAM Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" 20 Step 6 LCD Mobile Lift Stand Model: STV-C65 Cable management
More informationHEMI / BB Chrysler Installation Manual For Systems with A/C #14800 / #14820
HEMI / BB Chrysler Installation Manual For Systems with A/C #14800 / #14820 Billet Specialties, Inc. 500 Shawmut Avenue. La Grange, Illinois 60526 Tech Line (708) 588-0505 Fax (708) 588-7181 PLEASE READ
More informationSTEVENS SUBPLATES. STEVENS ENGINEERING, INC. TOLL-FREE WEB FAX
STEVENS SUBPLATES Spacing of hole patterns on Stevens accessories is identical to the pattern on Stevens Subplates. Insertion of the pull dowels thru bushed holes in the accessory into corresponding bushed
More informationHEMI / BB Chrysler Installation Manual For Systems with A/C #14800 / #14820
HEMI / BB Chrysler Installation Manual For Systems with A/C #14800 / #14820 Billet Specialties, Inc. 500 Shawmut Avenue. La Grange, Illinois 60526 Tech Line (708) 588-0505 Fax (708) 588-7181 PLEASE READ
More informationPedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches
88 5549 181 Pedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken
More informationLOFT DOOR HANGER BARN DOORS & HARDWARE. Hardware Installation Instructions. Page
LOFT DOOR HANGER Page 1 Specifications 2 7/16" 3/8" 1-1/2 1-3/4 Ø3 3 7/8" 11-1/16 Page 2 Parts and Tools Tools Needed Tape Measure Pencil Drill with 1/8, 1/4 and 3/8 bits, 1 spade bit and Phillips bit
More informationN. 15th Street, Middlesboro, KY FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS
1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Flip Tarp Dump Body tarping system. With tarping systems
More informationFront axle components, overview
j a t Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved, or
More informationRequired Tools: Procedure:
Depending on the materials you process through your chipper, their moisture content, the climate you live in, and many other factors you may have difficulty removing the rotor from the engine shaft. The
More information12V MAX Mobile Angle Drill
Mobile Angle Drill Product Objectives Designed to suit the needs of finish carpenters, kitchen and cabinet installers, shop fitters and joiners Develop a lightweight angle drill constructed for various
More informationRYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET
RYOBI 0 in. ( mm) TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A 0 0 0 0 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding
More informationAssembly Instructions
Jury Base Seating January 2014 - Floor Anchor Specifications / 4 5 / 16 (4)½ diameter holes 1/ 4 2 4 8 #12.750.KIT4 1 5 / Hilti 4 KH-EZx2/ 8 Max. Torque: 18 ft/lbs punch clearance hole in carpet before
More informationCircular Saw MODEL MT581. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH Circular Saw MODEL MT58 005337 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More informationBlower Cutter Jig Saw Circular Saw Circular Saw Drill High Speed Drill High Speed Drill Mixer Hammer Drill Hammer Drill Demolition Hammer
Index M00 M00 M0801K M0901 M0920 M0921 M1902 M2300 M2401Z M3600 M3601 M3700 Cutter Drill Power Planer Compound Miter Saw Portable Cut-off Router Router (Plunge type) Trimmer 08 08 M4000 M4101 M4301 M5801
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Impact Wrench 6904VH 6905H DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Impact Wrench 6904VH 6905H 005299 DOUBLE INSULATION IMPORTANT: Read Before Using. 1 ENGLISH (Original instructions) SPECIFICATIONS Model 6904VH 6905H
More informationFord FE Installation Manual For Systems with A/C #14700 / #14720
Ford FE Installation Manual For Systems with A/C #14700 / #14720 Billet Specialties, Inc. 500 Shawmut Avenue. La Grange, Illinois 60526 Tech Line (708) 588-0505 Fax (708) 588-7181 PLEASE READ ALL INSTRUCTIONS
More informationINS T A L L A TIO N INS T R U C TIO N S. Ceiling Mount Track System
Ceiling Mount Track System 10.26.2016 Specifications Ceiling Post: Unassembled 2-7/8 Assembled 1-11/16 7/8 7-9/16 5-7/8 3/8 2 Tubes 1/2 2-3/8 5 Parts and Tools Tools Needed Tape Measure Pencil Drill with
More informationDoor window. Front door window, assembly overview
64-50 Door window Front door window, assembly overview 1 - Window channel Pushed onto flange 2 - Door window Removing Page 64-52 Adjusting Page 64-53 3 - Door 4 - Outer window channel Pushed onto flange
More informationHEMI / BB Chrysler Installation Manual For Systems without A/C #14805 / #14825
HEMI / BB Chrysler Installation Manual For Systems without A/C #14805 / #14825 PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLING ANY COMPONENTS OF THE TRU TRAC SERPENTINE SYSTEM IMPORTANT: Must use thin crank
More information50, ,000 18,800 8,000. CODE 04 ER (ER ) UPC Chuck/W ITS Central Chuck. CODE 04 ER (ER ) UPC Pallet For Alignment
CODE 04 ER-007826 (ER-017777) UPC Pallet For Alignment CODE 04 ER-007823 (ER-016092) UPC Chuck/W ITS Central Chuck Application To align angular position and to determine the center of UPC chucks. Please
More informationIDR assembly instructions:
IDR assembly instructions: Required Tools: 2 X 12mm Open End Wrench 14mm open end wrench #2 Phillips Head Screw Driver (Drill with adjustable torque clutch recommended) 8mm nut driver (Supplied in IDR-AK)
More informationB-Too Drilling and Tapping Machine Instruction and Maintenance Manual
B-Too Drilling and Tapping Machine Instruction and Maintenance Manual Thank you for your purchase of the B-Too Drilling and Tapping Machine. Please read and understand this short operation manual. Our
More informationASSIGNMENT 3. Textbook Assignment: 3-5. Which of the following types of hammers is used for driving and pulling nails?
ASSIGNMENT 3 Textbook Assignment: "Clamps," "Jacks," Hammers, Mallets, and Mauls," "Screwdrivers," "Manual Drills," "Screw and Tap Extractors," "Wrenches," "Chisels," and "Punches," chapters 19 through
More informationFM2113PC/FM2114PC SBC Top Mount Alt, w/ A/C & Power Steering
10) At this time assemble the power steering bracket and pump assembly from the instructions provided with the power steering bracket beginning at step 7. Return to step 10 on this sheet when complete.
More informationINSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 3185 MID-PANEL CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0252 ORDER
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27B
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS = Part number change from previous service
More informationEllisSaw.com. EllisSaw.com P.O. Box Verona, WI
P.O. Box 9019 Verona, WI 9-019 GENERAL OPERATING & SAFETY INSTRUCTIONS * READ INSTRUCTIONS BEFORE USE * CAUTION: Disconnect power supply cord from power source when doing repair work or changing belt.
More informationFM2113PC/FM2114PC SBC Top Mount Alt, w/ A/C & Power Steering
10) At this time assemble the power steering bracket and pump assembly from the instructions provided with the power steering bracket beginning at step 7. Return to step 10 on this sheet when complete.
More informationReady To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
More informationColonial Classic Bar
88 5528 991 Colonial Classic Bar IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
More informationBX2173 Installation Instructions Ford Focus (including the 2.3L engine) 2003 Ford Focus SVT
BX2173 Installation Instructions 2000-04 Ford Focus (including the 2.3L engine) 2003 Ford Focus SVT Serial No. The front fascia, coolant line bracket and anti-pollution devices are removed for baseplate
More informationPART #MSP-DCCST Flat Panel Tilt Mount
INSTALLATION INSTRUCTIONS PART # Flat Panel Tilt Mount The Flat Panel Tilt Mount is a quick disconnect mounting solution for flat panel displays. The mount features adjustability between 0 and 15 degrees
More information5-Axis Machine Tools from SMW-AUTOBLOK
5-Axis Machine Tools from SMW-AUTOBLOK 5-Axis Machine Tools ensures the following advantages: Ideal suitable for OP 10 use ST5-2G also suitable for OP 20 use Jaws with SinterGrip clamping inserts for clamping
More informationTilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM
Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM Easy installation Built-in level for easy positioning Corrective leveling adjustments after installation Forward /
More informationOperating instructions. Twin cutter boring head Ø mm
Operating instructions Twin cutter boring head Ø23.5-153.0 mm English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety information
More informationGrizzly Drill Press SOP
Grizzly Drill Press SOP Drill Press is wired to run on 0V. Drill Press has a built in light with a ON/OFF switch. Never hold a workpiece by hand while drilling. Clamp it down or hold it in a vice. Never
More information5-AXIS MACHINING SCS QUINTUS WWW. WORKHOLDINGSOLUTIONSGROUP. COM
WORKHOLDING SOLUTIONS FOR -AXIS MACHINING SCS MC QUINTUS ONE system / MANY solutions WWW. WORKHOLDINGSOLUTIONSGROUP. COM MCCLAMPING S YSTEM for -axis machining MC + Quintus... MC Clamping System Free access
More informationBABY WOLF LOOM. Assembly Instructions for Knocked-Down Looms
BABY WOLF LOOM Assembly Instructions for Knocked-Down Looms BEFORE YOU BEGIN Please read through the directions before beginning to assemble your loom. Unpack the loom parts carefully. Do not throw away
More informationMounting a BalanceBox 400 to a brick wall
Unpack the BalanceBox 400 and remove the Wall frame cover and its bag of screws. Slide the cover out at the top. NOTE: the cover is NOT included with the BalanceBox 400H LOCK SCREW HOLE MOBILE STAND MOUNTING
More informationDrill INSTRUCTION MANUAL. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE 1 REFERENCE.
ENGLISH (Original instructions) INSTRUCTION MANUAL Drill 6411 6412 6413 007894 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE
More informationSmall Block Ford. 289 / 302 / 351W / 5.0 Installation Manual For Systems without A/C #13605 / #13625
Small lock Ford 289 / 302 / 351W / 5.0 Installation Manual For Systems without /C #13605 / #13625 illet Specialties, Inc. 500 Shawmut venue. La Grange, Illinois 60526 Tech Line (708) 588-0505 Fax (708)
More informationCOOPERATIVE PATENT CLASSIFICATION
CPC B COOPERATIVE PATENT CLASSIFICATION PERFORMING OPERATIONS; TRANSPORTING (NOTES omitted) SHAPING B25 HAND TOOLS; PORTABLE POWER-DRIVEN TOOLS; MANIPULATORS (NOTE omitted) B25B TOOLS OR BENCH DEVICES
More informationadaptivemechanical adaptive
Mechanical clamping elements mechanical 6 Content Product group 6 Sliding clamp, mechanical 6.2210 Clamping block, mechanical 6.2212 High-pressure spindle, mechanical with integral wedge system 6.2270
More informationHEAVY DUTY 11 STEEL CABINET
HEAVY DUTY STEEL CABINET ASSEMBLY INSTRUCTIONS ONE DRAWER BASE CABINET 05-206 Parts List Part No Description Qty Image ONE DRAWER BASE CABINET Part No Description Qty Image SB- Cabinet Body EH-0 Euro Hinge
More informationSM-RAZOR-F-M/L/XL. Strong Low Profile Fixed Mount for Ultra-Thin Flat-Panel TVs INSTALLATION MANUAL
SM-RAZOR-F-M/L/XL Strong Low Profile Fixed Mount for Ultra-Thin Flat-Panel TVs INSTALLATION MANUAL WARNINGS: Installation of this product should be done by a qualified professional. Do not begin installation
More informationTABLE OF CONTENTS MODEL 8750/8800 OCL
TABLE OF CONTENTS MODEL 8750/8800 OCL Warranty Registration...2 Warranty...3 Vehicle Preparation...4 Attaching the Lathe using Universal Plates (8750)...5 Threaded Plates (RED)...6 Unthreaded Plates (BLUE)...7
More informationRYOBI 10 in. TABLE SAW - MODEL NO. BT3000
FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR
More informationTable of Contents. B. Base Tool Changer...2 MC-6 Manual Tool Changer...2
Table of Contents B. Base Tool Changer...2 MC-6 Manual Tool Changer...2 1. Product Overview... 2 1.1 Master Plate Assembly... 2 1.2 Tool Plate Assembly... 3 1.3 Optional Modules... 3 2. Installation...
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC
More informationParts Breakdown Page 1 of 13 2/13
Page 1 of 13 2/13 Page 2 of 13 2/13 Page 3 of 13 2/13 Page 4 of 13 2/13 Page 5 of 13 2/13 Page 6 of 13 2/13 Page 7 of 13 2/13 Products with multiple versions are listed in subsiding order with the newest
More informationHYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
More informationGENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.
More informationSM-RAZOR-T-M/L/XL. Strong Low Profile Tilt Mount for Ultra-Thin Flat-Panel TVs INSTRUCTION MANUAL
SM-RAZOR-T-M/L/XL Strong Low Profile Tilt Mount for Ultra-Thin Flat-Panel TVs INSTRUCTION MANUAL WARNINGS: Installation of this product should be done by a qualified professional. Do not begin installation
More informationInstallation Instructions Precision Sport Shifter
Installation Instructions Precision Sport Shifter 2004 and up Pontiac GTO Part Number 45043 2010, 2005, 2004 by B&M Racing and Performance Products This B&M Precision Sport Shifter has been designed to
More informationOriginal Gallery System
GAllery System Art Displays Original Gallery System a Gallery System product Here s everything you need to know to get started with your Gallery System Art Hanging System GS getting started To install
More informationExtracts without expanding material Ideal for pipes and fittings Works on left-hand or right-hand threads
Serious Solutions for Stuck Fasteners IRWIN Tools has the solution to deal with a stuck fastener, a rounded or broken head, a snapped stud, or a stripped screw or fitting. Five different styles of extractors
More informationTRUE TECHNICAL SERVICE MANUAL - ALL MODELS. DOORS/DRAWERS/LIDS
DOORS/DRAWERS/LIDS 55 56 NOTES DOORS/DRAWERS/LIDS Springs 97 TORSION SPRING REPLACEMENT GDM RADIUS FRONT - SWING DOOR INSTALLATION INSTRUCTIONS Tools Required (2) - 1 8" drift Punch (forged) Needle-Nose
More informationANCHORS SLEEVE ANCHORS BOLT DIAMETER
SLEEVE ANCHORS No hole spotting. No mis-alignments. Simply drill through the fixture into concrete, insert and tighten. Preassembled for fast, easy installation. No special tools necessary; meets federal
More informationChain Drive Vise. Installation Instructions. (revised 11/29/2018)
Chain Drive Vise Installation Instructions (revised 11/29/2018) Lie-Nielsen Chain Drive Vise Instructions Table of Contents page About Your Chain Drive Vise 3 Parts List 4 Exploded Parts Diagram 5 step
More information