SMPS MOSFET. V DSS R DS(on) typ. I D

Similar documents
SMPS MOSFET. V DSS R DS(on) typ. I D

SMPS MOSFET. V DSS R DS(on) max I D

IRFP054V. HEXFET Power MOSFET V DSS = 60V. R DS(on) = 9.0mΩ I D = 93Aˆ. Absolute Maximum Ratings. Thermal Resistance PD

SMPS MOSFET. V DSS R DS(on) max I D

SMPS MOSFET. V DSS R DS(on) max I D

SMPS MOSFET. V DSS R DS(on) typ. Trr typ. I D. 500V 0.125Ω 170ns 34A

IRF1704 Benefits AUTOMOTIVE MOSFET

SMPS MOSFET. V DSS Rds(on) max I D

C Soldering Temperature, for 10 seconds 300 (1.6mm from case )

IRFB260NPbF HEXFET Power MOSFET

D-Pak TO-252AA. I-Pak TO-251AA. 1

SMPS MOSFET. V DSS R DS(on) max I D

SMPS MOSFET. V DSS R DS(on) max I D

SMPS MOSFET HEXFET Power MOSFET. V DSS R DS(on) max I D. 320 P C = 25 C Power Dissipation 260 Linear Derating Factor.

SMPS MOSFET. V DSS Rds(on) max I D

D-Pak TO-252AA. I-Pak TO-251AA. 1

1412 P C = 25 C Maximum Power Dissipation 300 Linear Derating Factor. V/ns T J. Thermal Resistance Symbol Parameter Typ. Max.

SMPS MOSFET. V DSS R DS(on) max I D

SMPS MOSFET. V DSS R DS(on) max I D

SMPS MOSFET. V DSS R DS(on) max (mω) I D

SMPS MOSFET. V DSS R DS(on) typ. Trr typ. I D. 600V 385mΩ 130ns 15A

V DSS. W/ C V GS Gate-to-Source Voltage ±30 E AS (Thermally limited) mj T J Operating Junction and -55 to + 175

SMPS MOSFET. V DSS R DS(on) max I D

IRF3315 APPROVED. HEXFET Power MOSFET V DSS = 150V. R DS(on) = 0.07Ω I D = 27A

SMPS MOSFET. V DS 200 V V DS (Avalanche) min. 260 V R DS(ON) 10V 54 m: T J max 175 C TO-220AB. IRFB38N20DPbF

IRFR24N15DPbF IRFU24N15DPbF

SMPS MOSFET. V DSS R DS(on) max I D

AUTOMOTIVE MOSFET. HEXFET Power MOSFET Wiper Control

SMPS MOSFET. V DSS R DS (on) max I D

TO-220AB low package cost of the TO-220 contribute to its wide acceptance throughout the industry.

IRF3205S/L. HEXFET Power MOSFET V DSS = 55V. R DS(on) = 8.0mΩ I D = 110A

IRFZ48R. HEXFET Power MOSFET V DSS = 60V. R DS(on) = 0.018Ω I D = 50*A. Thermal Resistance PD

W/ C V GS Gate-to-Source Voltage ± 20 dv/dt Peak Diode Recovery f 5.3

V DSS R DS(on) max I D

T J = 25 C (unless otherwise specified) Symbol Parameter Min. Typ. Max. Units V (BR)DSS DraintoSource Breakdown Voltage 24 V V (BR)DSS / T J

IRFR24N15D IRFU24N15D

IRFS3004-7PPbF HEXFET Power MOSFET

l Advanced Process Technology TO-220AB IRF640NPbF

V DSS R DS(on) max I D

SMPS MOSFET. V DSS R DS(on) max I D

l Advanced Process Technology

V DSS R DS(on) max I D

SMPS MOSFET. V DSS R DS(on) max I D

l Advanced Process Technology TO-220AB IRF630N

Power MOSFET FEATURES. IRFP23N50LPbF SiHFP23N50L-E3 IRFP23N50L SiHFP23N50L

W/ C V GS Gate-to-Source Voltage ±20 dv/dt Peak Diode Recovery f 4.6. V/ns T J. mj I AR. Avalanche Current d A See Fig. 14, 15, 22a, 22b, E AR

V DSS Rds(on) max I D

W/ C V GS Gate-to-Source Voltage ± 20 dv/dt Peak Diode Recovery f 27

AUTOMOTIVE MOSFET. I D = 140A Fast Switching

SMPS MOSFET TO-220AB IRL3713. Symbol Parameter Max V DS Drain-Source Voltage 30 V GS Gate-to-Source Voltage ± 20

C Soldering Temperature, for 10 seconds 300 (1.6mm from case )

SMPS MOSFET. V DSS R DS(on) max I D

SMPS MOSFET. Storage Temperature Range Soldering Temperature, for 10 seconds 300. C (1.6mm from case )

SMPS MOSFET. V DSS R DS(on) max I D

SMPS MOSFET. V DSS R DS(on) max I D

AUTOMOTIVE MOSFET. C Soldering Temperature, for 10 seconds 300 (1.6mm from case )

W/ C V GS Gate-to-Source Voltage ± 20 dv/dt Peak Diode Recovery e 13

W/ C V GS Gate-to-Source Voltage ± 20 dv/dt Peak Diode Recovery e 26

C Soldering Temperature, for 10 seconds 300 (1.6mm from case )

SMPS MOSFET. V DSS R DS(on) max I D A I DM. 320 P C = 25 C Power Dissipation 260 Linear Derating Factor. V/ns T J

IRF6215PbF HEXFET Power MOSFET

C Soldering Temperature, for 10 seconds 300 (1.6mm from case ) Mounting Torque, 6-32 or M3 screw 1.1 (10) N m (lbf in)

IRFZ48NS IRFZ48NL HEXFET Power MOSFET

IRL1404SPbF IRL1404LPbF

IRF530NSPbF IRF530NLPbF

W/ C V GS Gate-to-Source Voltage ±16 dv/dt Peak Diode Recovery f 8.0. V/ns T J. mj I AR. Avalanche Current d A See Fig. 14, 15, 22a, 22b E AR

SMPS MOSFET. V DSS R DS(on) max I D

Description Absolute Maximum Ratings Parameter Max. Units Thermal Resistance Parameter Typ. Max. Units

Description Absolute Maximum Ratings Parameter Max. Units Thermal Resistance Parameter Typ. Max. Units

IRL3803VSPbF IRL3803VLPbF HEXFET Power MOSFET

Description Absolute Maximum Ratings Parameter Max. Units Thermal Resistance Parameter Typ. Max. Units

W/ C V GS Gate-to-Source Voltage ± 30 dv/dt Peak Diode Recovery e 57

IRFP2907PbF. HEXFET Power MOSFET V DSS = 75V. R DS(on) = 4.5mΩ I D = 209A. Typical Applications. Benefits

W/ C V GS Gate-to-Source Voltage ± 20 dv/dt Peak Diode Recovery f 14. V/ns T J. mj I AR. Thermal Resistance Symbol Parameter Typ. Max.

SMPS MOSFET. V DSS R DS(on) max I D

SMPS MOSFET. V DSS Rds(on) max I D

HEXFET Power MOSFET V DSS = 40V. R DS(on) = Ω I D = 130A

IRF2204SPbF IRF2204LPbF HEXFET Power MOSFET

IRF3808S IRF3808L HEXFET Power MOSFET

SMPS MOSFET. V DSS R DS(on) max I D. l TO-220AB

W/ C V GS Gate-to-Source Voltage ± 20 dv/dt Peak Diode Recovery f 11. V/ns T J. mj I AR

W/ C V GS Gate-to-Source Voltage ± 20 dv/dt Peak Diode Recovery f 2.5

SMPS MOSFET. V DSS R DS(on) max I D

AUTOMOTIVE MOSFET TO-220AB IRL1404Z. Absolute Maximum Ratings Max. I T C = 25 C Continuous Drain Current, V 10V (Silicon Limited)

V DSS R DS(on) max (mw)

Approved (Not Released) V DSS R DS(on) max Qg. 30V 3.5mΩ 36nC

Power MOSFET FEATURES. IRF740APbF SiHF740A-E3 IRF740A SiHF740A T C = 25 C

SMPS MOSFET. V DSS Rds(on) max I D

V DSS R DS(on) max (mω)

SMPS MOSFET. V DSS R DS(on) max I D

IRFR3806PbF IRFU3806PbF

V DSS R DS(on) max Qg (typ.) 30V GS = 10V 57nC

IRFZ48VS. HEXFET Power MOSFET V DSS = 60V. R DS(on) = 12mΩ I D = 72A

AUTOMOTIVE MOSFET. 30 Pulsed Drain Current c. I DM P C = 25 C Maximum Power Dissipation 120 Linear Derating Factor

V DSS R DS(on) max Qg. 560 P C = 25 C Maximum Power Dissipation g 140 P C = 100 C Maximum Power Dissipation g Linear Derating Factor

SMPS MOSFET. V DSS R DS(on) max I D. Absolute Maximum Ratings Symbol Parameter Max 20 V V GS A I DM. 90 W P A = 70 C Maximum Power Dissipation e

IRF7328PbF. HEXFET Power MOSFET V DSS R DS(on) max I D

Absolute Maximum Ratings Max. A I T C = 25 C Continuous Drain Current, V 10V (Package Limited)

IRF2804PbF IRF2804SPbF IRF2804LPbF HEXFET Power MOSFET

W/ C V GS Gate-to-Source Voltage ± 20 dv/dt Peak Diode Recovery e 57

Transcription:

Absolute Maximum Ratings SMPS MOSFET PD 93923B IRFPS40N50L Applications HEXFET Power MOSFET l Switch Mode Power Supply (SMPS) l UninterruptIble Power Supply V DSS R DS(on) typ. I D l High Speed Power Switching 500V 0.087Ω 46A l ZVS and High Frequency Circuit l PWM Inverters Benefits l Low Gate Charge Qg results in Simple Drive Requirement l Improved Gate, Avalanche and Dynamic dv/dt Ruggedness l Fully Characterized Capacitance and Avalanche Voltage and Current l Low Trr and Soft Diode Recovery l High Performance Optimised Antiparallel Diode SUPER TO247AC Parameter Max. Units I D @ T C = 25 C Continuous Drain Current, V GS @ V 46 I D @ T C = 0 C Continuous Drain Current, V GS @ V 29 A I DM Pulsed Drain Current 80 P D @T C = 25 C Power Dissipation 540 W Linear Derating Factor 4.3 W/ C V GS GatetoSource Voltage ± 30 V dv/dtpeak Diode Recovery dv/dt ƒ 25 V/ns T J Operating Junction and 55 to 50 T STG Storage Temperature Range Soldering Temperature, for seconds 300 C (.6mm from case ) Diode Characteristics Symbol Parameter Min. Typ. Max. Units Conditions I S Continuous Source Current 46 MOSFET symbol D (Body Diode) showing the A G I SM Pulsed Source Current 80 integral reverse (Body Diode) pn junction diode. S V SD Diode Forward Voltage.5 V T J = 25 C, I S = 46A, V GS = 0V t rr Reverse Recovery Time 70 250 T J = 25 C I F = 46A ns 220 330 T J = 25 C di/dt = 0A/µs 705 60 nc T J = 25 C Q rr Reverse Recovery Charge.3 2.0 µc T J = 25 C I RRM Reverse Recovery Current 9.0 A t on Forward TurnOn Time Intrinsic turnon time is negligible (turnon is dominated by L S L D ) Typical SMPS Topologies l Bridge Converters l All Zero Voltage Switching www.irf.com 05/09/0

Static @ T J = 25 C (unless otherwise specified) Symbol Parameter Min. Typ. Max. Units Conditions V (BR)DSS DraintoSource Breakdown Voltage 500 V V GS = 0V, I D = 250µA V (BR)DSS / T J Breakdown Voltage Temp. Coefficient 0.60 V/ C Reference to 25 C, I D = ma R DS(on) Static DraintoSource OnResistance 0.087 0.0 Ω V GS = V, I D = 28A V GS(th) Gate Threshold Voltage 3.0 5.0 V V DS = V GS, I D = 250µA I DSS DraintoSource Leakage Current 50 µa V DS = 500V, V GS = 0V 2.0 ma V DS = 400V, V GS = 0V, T J = 25 C I GSS GatetoSource Forward Leakage 0 V GS = 30V na GatetoSource Reverse Leakage 0 V GS = 30V Dynamic @ T J = 25 C (unless otherwise specified) Symbol Parameter Min. Typ. Max. Units Conditions g fs Forward Transconductance 2 S V DS = 50V, I D = 46A Q g Total Gate Charge 380 I D = 46A Q gs GatetoSource Charge 80 nc V DS = 400V Q gd GatetoDrain ("Miller") Charge 90 V GS = V, See Fig. 6 and 3 t d(on) TurnOn Delay Time 27 V DD = 250V t r Rise Time 70 ns I D = 46A t d(off) TurnOff Delay Time 50 R G = 0.85Ω t f Fall Time 69 V GS = V,See Fig. C iss Input Capacitance 8 V GS = 0V C oss Output Capacitance 960 V DS = 25V C rss Reverse Transfer Capacitance 30 pf ƒ =.0MHz, See Fig. 5 C oss Output Capacitance 200 V GS = 0V, V DS =.0V, ƒ =.0MHz C oss Output Capacitance 240 V GS = 0V, V DS = 400V, ƒ =.0MHz C oss eff. Effective Output Capacitance 420 V GS = 0V, V DS = 0V to 400V Avalanche Characteristics Symbol Parameter Typ. Max. Units E AS Single Pulse Avalanche Energy 920 mj I AR Avalanche Current 46 A E AR Repetitive Avalanche Energy 54 mj Thermal Resistance Symbol Parameter Typ. Max. Units R θjc JunctiontoCase 0.23 R θcs CasetoSink, Flat, Greased Surface 0.24 C/W R θja JunctiontoAmbient 40 Notes: Repetitive rating; pulse width limited by max. junction temperature. (See Fig. ) Starting T J = 25 C, L = 0.86mH, R G = 25Ω, I AS = 46A (See Figure 2a) ƒ I SD 46A, di/dt 367A/µs, V DD V (BR)DSS, T J 50 C. Pulse width 400µs; duty cycle 2%. C oss eff. is a fixed capacitance that gives the same charging time as C oss while V DS is rising from 0 to 80% V DSS 2 www.irf.com

I D, DraintoSource Current (A) 00 0 0. VGS TOP 5V V 8.0V 7.0V 6.0V 5.5V 5.0V BOTTOM4.5V 4.5V I D, DraintoSource Current (A) 00 0 VGS TOP 5V V 8.0V 7.0V 6.0V 5.5V 5.0V BOTTOM4.5V 4.5V 20µs PULSE WIDTH 0.0 T J = 25 C 0. 0 V DS, DraintoSource Voltage (V) 20µs PULSE WIDTH T J = 50 C 0. 0. 0 V DS, DraintoSource Voltage (V) Fig. Typical Output Characteristics Fig 2. Typical Output Characteristics I D, DraintoSource Current (A) 00 0 T J = 50 C T J = 25 C V DS= 50V 20µs PULSE WIDTH 0. 4 5 6 7 8 9 V GS, GatetoSource Voltage (V) R DS(on), DraintoSource On Resistance (Normalized) 3.0 I D = 47A 2.5 2.0.5.0 0.5 V GS= V 0.0 60 40 20 0 20 40 60 80 0 20 40 60 T J, Junction Temperature ( C) Fig 3. Typical Transfer Characteristics Fig 4. Normalized OnResistance Vs. Temperature www.irf.com 3

C, Capacitance(pF) IRFPS40N50L 00000 0000 000 00 0 V GS = 0V, f = MHZ C iss = C gs C gd, C ds SHORTED C rss = C gd C oss = C ds C gd Ciss Coss Crss 0 00 V DS, DraintoSource Voltage (V) V GS, GatetoSource Voltage (V) 20 5 5 I D = 47A V DS= 400V V DS= 250V V DS= 0V 0 0 0 200 300 400 Q G, Total Gate Charge (nc) Fig 5. Typical Capacitance Vs. DraintoSource Voltage Fig 6. Typical Gate Charge Vs. GatetoSource Voltage I SD, Reverse Drain Current (A) 00 0 T J = 50 C T J = 25 C V GS = 0 V 0. 0.2 0.7.2.7 2.2 V SD,SourcetoDrain Voltage (V) I D, Drain Current (A) 00 0 OPERATION IN THIS AREA LIMITED BY R DS(on) us 0us ms TC = 25 C ms TJ = 50 C Single Pulse 0 00 V DS, DraintoSource Voltage (V) Fig 7. Typical SourceDrain Diode Forward Voltage Fig 8. Maximum Safe Operating Area 4 www.irf.com

50 V DS R D I D, Drain Current (A) 40 30 20 Fig a. Switching Time Test Circuit V DS 90% R G V GS V Pulse Width µs Duty Factor 0. % D.U.T. V DD 0 25 50 75 0 25 50 T C, Case Temperature ( C) Fig 9. Maximum Drain Current Vs. Case Temperature % V GS t d(on) t r t d(off) t f Fig b. Switching Time Waveforms Thermal Response (Z thjc ) 0. 0.0 D = 0.50 0.20 0. 0.05 0.02 0.0 SINGLE PULSE (THERMAL RESPONSE) Notes:. Duty factor D = t / t 2 0.00 2. Peak T J =P DM x Z thjc TC 0.0000 0.000 0.00 0.0 0. t, Rectangular Pulse Duration (sec) PDM t t2 Fig. Maximum Effective Transient Thermal Impedance, JunctiontoCase www.irf.com 5

E AS, Single Pulse Avalanche Energy (mj) 2000 500 00 500 TOP BOTTOM I D 2A 30A 46A 0 25 50 75 0 25 50 Starting T, Junction Temperature( J C) Fig 2a. Maximum Avalanche Energy Vs. Drain Current R G V DS 20V tp Fig 2c. Unclamped Inductive Test Circuit tp L D.U.T I AS 0.0Ω V (BR)DSS 5V DRIVER V DD A I AS Fig 2d. Unclamped Inductive Waveforms Current Regulator Same Type as D.U.T. 50KΩ Q G 2V.2µF.3µF D.U.T. V DS V GS Q GS Q GD V GS V G 3mA I G I D Current Sampling Resistors Fig 3a. Gate Charge Test Circuit Charge Fig 3b. Basic Gate Charge Waveform 6 www.irf.com

Peak Diode Recovery dv/dt Test Circuit IRFPS40N50L D.U.T ƒ Circuit Layout Considerations Low Stray Inductance Ground Plane Low Leakage Inductance Current Transformer R G dv/dt controlled by R G Driver same type as D.U.T. I SD controlled by Duty Factor "D" D.U.T. Device Under Test V DD Driver Gate Drive Period P.W. D = P.W. Period V GS =V * D.U.T. I SD Waveform Reverse Recovery Current Body Diode Forward Current di/dt D.U.T. V DS Waveform Diode Recovery dv/dt V DD ReApplied Voltage Inductor Curent Body Diode Forward Drop Ripple 5% I SD * V GS = 5V for Logic Level Devices Fig 4. For NChannel HEXFET Power MOSFETs www.irf.com 7

SUPER TO247AC Package Outline Dimensions are shown in millimeters (inches) 2X R 3.00 [.8] 2.00 [.079] 6. [.632] 5. [.595] A 5.50 [.26] 4.50 [.78] 0.3 [.005] 2.5 [.084].45 [.058] 0.25 [.0] B A 3.90 [.547] 3.30 [.524].30 [.05] 0.70 [.028] 20.80 [.88] 9.80 [.780] 4 6. [.633] 5.50 [.6] 4 C 2 3 B 4.80 [.582] 3.80 [.544] 4.25 [.67] 3.85 [.52] Ø.60 [.063] MAX. E E 5.45 [.25] 2X.60 [.062] 3X.45 [.058] 0.25 [.0] B A.30 [.05] 3X. [.044] 2.35 [.092].65 [.065] SECTION EE NOT ES :. DIMENS IONING AND TOLERANCING PER ASME Y4.5M994. 2. DIMENSIONS ARE SHOWN IN MILLIMETERS [INCHES] 3. CONT ROLLING DIMENSION: MILLIMET ER 4. OUTLINE CONFORMS TO JEDEC OUTLINE TO274AA LE AD AS S IGNMENT S MOS FET IGBT GATE 2 DRAIN 3 SOURCE 4 DRAIN GATE 2 COLLECT OR 3 EMITTER 4 COLLECT OR Data and specifications subject to change without notice. This product has been designed and qualified for the industrial market. Qualification Standards can be found on IR s Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (3) 25275 TAC Fax: (3) 2527903 Visit us at www.irf.com for sales contact information.05/0 8 www.irf.com