IMPORTANT 88 5089 95C Kitchen Cart Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Top G. Back Piece 2 pcs. O. Door H. Back Stretcher J. Front Rail P. Door Q. Gate Leg I. Front Stretcher K. Base R. Side Rack T. Base Rack B. Side Panel S. Side Rack U. Pipe C. Side Panel L. Shelf 2 pcs. V. Drawer D. E. Middle Panel Middle Panel M. Handle Arm 2 pcs. W. Drawer Refer to later page(s) of these instructions for drawer assembly. F. Back Panel N. Round Arm Hardware List Hex Wrench Cam Lock 4 pcs. (+2 extra) M6x35 Head Cap Bolt 14 pcs. (+1 extra) M3.5x25 Wood Screw (long) 32 pcs. (+1 extra) Wood Plug 10 pcs. (+2 extra) Pull Handle 6 pcs. Caster 2 Locking 2 Non-Locking 4 pcs. Small Hex Wrench Cam Lock Screw 4 pcs. (+1 extra) Tool(s) required for assembly: Phillips screwdriver M4x16 Wood Screw 22 pcs. (+1 extra) M3.5x13 Wood Screw (short) 24 pcs. (+1 extra) Adjustable Pin 8 pcs. (+1 extra) Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319 M4x25 Machine Screw 12 pcs.
Assembly Instructions 2/7 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future. STEP 1 Cam Lock Screw Insert Cam Lock Screws into pre-drilled holes of Top (A). (See Figure 1) A Non-Locking Caster Figure 1 Arrow sticker at front STEP 2 K Attach Casters underneath Base (K) with Wood Screws into pre-drilled holes, with Locking Casters at front. (See Figure 2) Locking Caster Note: Arrow sticker indicates front of Base (K). Wood Screw D J G E G Figure 2 STEP 3 J J Attach Back Pieces (G) to Middle Panels (D) and (E). Attach Front Rails (J) to Middle Panels (D) and (E).
Assembly Instructions 3/7 STEP 4 B Attach unit to Base (K). Attach Side Panel (B) to unit with Head Cap Bolts. (See Figure 3) K Figure 3 Head Cap Bolt STEP 5 H Slide Back Panels (F) into place. Attach Back Stretcher (H) and Front Stretcher (I) to unit with Head Cap Bolts. I F F F Head Cap Bolt Attach Side Panel (C) to unit with Head Cap Bolts. C S T U U U R STEP 6 Attach Side Rack (R) to unit with Head Cap Bolt. Slide Base Rack (T) and Pipes (U) into Side Rack (R). Attach Side Rack (S) to unit with Head Cap Bolt.
Assembly Instructions 4/7 STEP 7 Head Cap Bolt Attach Handle Arms (M) to Side Panel (C) with Head Cap Bolts. Slide Round Arm (N) into place. Attach Gate Leg (Q) to back of unit with Wood Screws into pre-drilled holes. (See Figure 4) M M N C Q Figure 4 Wood Screw STEP 8 O Insert Adjustable Pins into side panels and middle panels at desired level. P Place Shelves (L) into position. L L Attach Doors (O) and (P) by sliding door lift hinges into side panel lift hinges. (See Figure 5) Adjustable Pin Attach Pull Handles to Doors (O) and (P) with Machine Screws. (See Figure 6) Figure 5 Figure 6
Assembly Instructions 5/7 Drawer (V) Bottom V3 V2 V1 V4 STEP 9 Attach Drawer Front (V1) and Drawer Back (V2) to Drawer Side (V3) with Wood Screws (long). Wood Screw (long) Roller at back Attach Drawer Side (V4) to unit with Wood Screws (long). STEP 10 Slide Drawer Bottom (V5) into the grooves of Drawer Sides (V3) and (V4) until it meets Drawer Front (V1). Attach Drawer Bottom (V5) to unit with Wood Screws (short). Wood Screw (short) V3 V1 V5 V4 Pull Handle Machine Screw V2 STEP 11 Attach Pull Handle with Machine Screws. Part List V1. Drawer Front V2. Drawer Back V3. Drawer Side V4. Drawer Side V5. Drawer Bottom
Assembly Instructions 6/7 Drawer (W) Bottom W1 W3 W4 STEP 12 STEP 13 W2 Wood Screw (long) Roller at back Attach Drawer Front (W1) and Drawer Back (W2) to Drawer Side (W3) with Wood Screws (long). Attach Drawer Side (W4) to unit with Wood Screws (long). Slide Drawer Bottom (W5) into the grooves of Drawer Sides (W3) and (W4) until it meets Drawer Front (W1). Attach Drawer Bottom (W5) to unit with Wood Screws (short). Wood Screw (short) W3 W1 W5 Pull Handle Machine Screw W2 W4 STEP 14 Attach Pull Handle with Machine Screws. Part List W1. Drawer Front W2. Drawer Back W3. Drawer Side W4. Drawer Side W5. Drawer Bottom
Assembly Instructions 7/7 Cam Lock A STEP 15 Attach Top (A) to unit with Cam Locks. (See Figure 7) V Slide Drawers (V) and (W) into position. V V W Figure 7 STEP 16 Cover all holes with Wood Plugs. (See Figure 8) Figure 8 Wood Plug
CARE INSTRUCTIONS NEVER allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. Do not use power tools above 8 volts to assemble. CRACKING Do not place in direct sunlight. FADING Do not write directly on surface. MARKING Do not place hot objects on surface. FINISH DAMAGE Do not use rubber based placemats. DISCOLORING Do not use commercial waxes and polishes. YELLOWING CLEAN with a soft cloth moistened in lukewarm soap and water. Buff with a dry clean cloth. Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at: www.homestyles-furniture.com/customer-service/replacement-parts Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319