DIN 0 CLAMPS Clamp Pairs HRL = Standard Duty (Ribbed Profile) HRGL = Standard Duty (Smooth Profile) HRS = Heavy Duty (Ribbed Profile) HRGS = Heavy Duty (Smooth Profile) Clamp Pair ore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum HRL KP d PP HRZ = Standard Duty Twin (Ribbed Profile) HRGZ = Standard Duty Twin (Smooth Profile) Clamp Pair ore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum HRZ KP d-d PP HREL & HRES Clamps with Rubber Inserts KP HRES /L KP PP HREL, HRES Size Clamp Pair Material PP = Polypropylene PA = Polyamide EE HRES / L EE d * HREL, HRES Size Rubber Insert ore Diameter (mm) Material TPE 7 = Santoprene TPE 7 NR = Nitrile (una) TPE7 *HREL series use the same rubber inserts as the HRES series, therefore the model code for them is HRES. Note: All other components for these clamps are the same as for HRL series standard duty single clamps. Refer to page - to -8 for details. PN#00800 / 0.7 / ACC0-7 -7
DIN 0 CLAMPS HRL, HRS, & HRZ Parts C-Rail Nuts (UNC Threads) Carbon Steel, Zinc Plated Stainless Steel Size Model Code Model Code 0 HRL 7 8 HRL 0- TM/ UNC ST ZN HRL 0- TM / UNC A HRS HRS - TM/8 UNC ST ZN HRS - TM/8 UNC A HRS TM7/ UNC ST ZN HRS TM7/ UNC A HRL 0- TM/ UNC ST ZN HRL 0- TM/ UNC A HRZ HRZ - TM/ UNC ST ZN HRZ - TM/ UNC A (METRIC Threads) Carbon Steel, Zinc Plated Stainless Steel Size Model Code Model Code 0 HRL 7 8 HRL 0- TM M ST ZN HRL 0- TM M A HRS HRS - TM0 M ST ZN HRS - TM0 M A HRS TM M ST ZN HRS TM M A HRL 0- TM M ST ZN HRL 0- TM M A HRZ HRZ - TM8 M ST ZN HRZ - TM8 M A C-Rail -8 Carbon Steel,Phosphate Coated Stainless Steel Size Model Code Model Code HRL M HRL TS 8X ST L M HRL TS 8X A M M HRL TS 8X ST L M HRL TS 8X A M HRS M HRS TS 0X ST L M HRS TS 0X A M M HRS TS 0X ST L M HRS TS 0X A M HRZ M HRL TS 8X ST L M HRL TS 8X A M M HRL TS 8X ST L M HRL TS 8X A M PN#00800 / 0.7 / ACC0-7
HRL & HRS with Stainless Steel Metal Components HRL Standard Duty HRS Heavy Duty Clamps with stainless steel metal components are available for corrosive environments. Our complete line of DIN 0 clamps are available in stainless steel. Some models are special order, which may require minimum quantities, and/or extended delivery times. Listed here are the standard duty and heavy duty single clamps with weld plate. 0 Stainless Steel: (A) Available from stock UNC bolts Stainless Steel: (A) Salt water resistance HRL sizes - in UNC - available from stock HRS sizes - in UNC Larger sizes in metric only Typical Arrangement Single Clamp with Weld Plate (HRL...A...) for Standard Duty (HRS...S...) for Heavy Duty Hex Head olts (SCREW H) Top Plate (DP) Clamp Pair (KP) Weld Plate (AP) C-Rail Nuts (TM) DIN 0 CLAMPS Stainless Steel UNC Stocked Program Light Duty (HRL) Size Model Code Part Number Arrangements (complete with PP clamp pair) HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC Weld Plates HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC Top Plates HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A Ext Hex Screws Screw H /-0 x. SS Screw H /-0 x.0 SS Screw H /-0 x.0 SS Screw H /-0 x.7 SS Screw H /-0 x.0 SS XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRL clamps on page - for available bore sizes. 0087 000899 000 00 00 0008 0009 000 00 00 07007 070090 070090 07007 0700 Heavy Duty (HRS) Size Model Code Part Number Arrangements (complete with PP clamp pair) HRS S XX PP A UNC HRS S XX PP A UNC HRS S XX PP A UNC HRS S XX PP A UNC HRS S XX PP A UNC Weld Plates HRS AP A UNC HRS AP A UNC HRS AP A UNC HRS AP A UNC HRS AP A UNC Top Plates HRS DP A HRS DP A HRS DP A HRS DP A HRS DP A Ext Hex Screws Screw H /8-x.7 SS Screw H /8-x. SS Screw H /8-x.7 SS Screw H /8-x.00 SS Screw H /8-x. SS XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRS clamps on page -7 for available bore sizes. 0087 000899 000 00 00 0008 0009 000 00 000 0707 070 0707 0707 0700 C-Rail (TS) PN#00800 / 0.7 / ACC0-7 -9
DIN 0 CLAMPS HRL Standard Duty 0 stainless steel (A) metal components Size Model Code Part Number Arrangements (complete with PP clamp pair) HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRL clamps on page - for available bore sizes. Weld Plates HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC Top Plates HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A Ext Hex Screws ( Stainless Steel) SCREW H /-0 x. SS SCREW H /-0 x.0 SS SCREW H /-0 x.0 SS SCREW H /-0 x.7 SS SCREW H /-0 x.0 SS SCREW H /-0 x.7 SS 0707 0707 07077 07078 07079 07080 0708 0708 0708 0708 07087 07088 07007 070090 070090 07007 0700 0700 HRL C-Rail HRL TS 8 x A M 009 HRL C-Rail Nuts HRL 0- TM / UNC A 0070 stainless steel (A) metal components (metric) Size Model Code Part Number Arrangements (complete with PP clamp pair) HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M Weld Plates (metric thread) HRL AP A M HRL AP A M HRL AP A M HRL AP A M HRL AP A M HRL AP A M Top Plates HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A Hex Head olts SCREW H MX0 A SCREW H MX A SCREW H MX0 A SCREW H MX A SCREW H MX0 A SCREW H MX70 A XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRL clamps on page - for available bore sizes. 00808 00809 0080 008 00 00 0008 0009 000 00 00 00 00009 000 0008 0000 000 000 HRS Heavy Duty stainless steel (A) metal components (metric) Size Model Code Part Number Arrangements (complete with PP clamp pair) XX = bore diameter HRS S XX PP A M A unique part number exists HRS S XX PP A M for each individual clamp bore HRS S XX PP A M diameter. A complete model HRS S XX PP A M code is sufficient for ordering. HRS S XX PP A M Use the dimensions table for HRS S XX PP A M standard HRS clamps on page -7 for available bore sizes. Weld Plates (metric thread) HRS AP A M HRS AP A M HRS AP A M HRS AP A M HRS AP A M HRS AP A M Top Plates 00 007 008 00790 00700 0070 HRS DP A 0008 HRS DP A 0009 HRS DP A 0000 HRS DP A 000 HRS DP A 000 HRS DP A 000 Hex Head olts (metric) SCREW H M0X A SCREW H M0X0 A SCREW H M0X70 A SCREW H MX00 A SCREW H MX0 A SCREW H M0X90 A 000 000 000 0007 0000 000 HRS C-Rail HRS TS 0X A M 009 HRS C-Rail Nuts HRS TM 0 A M HRS TM A M 007 0079-0 PN#00800 / 0.7 / ACC0-7
STANDARD CLAMPS Standard Clamps In addition to the DIN 0 Clamps HYDAC offers other standard products that assure a simple, reliable dampening support for lines which absorb shock, dampen vibration, and reduce noise in plumbing systems. Please contact HYDAC to discuss what product is right for you and your application. PN#00800 / 0.7 / ACC0-7 -
STANDARD CLAMPS HOM Flat Cushion Clamps F The interlock edge insures that the cushion remains in place. The HOM clamp assembly retains, guides, protects and uniformly spaces line runs. They go up fast, lines are rigid, and look neat. Features Attached with two standard* fasteners to any flat surface, the HOM clamp eliminates the use of special channels, providing savings in both space and cost. Low profile for limited space applications. The Clamp Available in steel (with electro-dichromate finish), and 0 stainless steel (A in the model code denotes 0 stainless steel). The Cushion Manufactured from a thermoplastic elastomer, it s built tough to withstand the effects of most oils, chemical and industrial cleaning compounds, in temperatures from -0 F to 7 F. *Note: Fasteners not provided. Model Code HOM (Refer to table) Application T = Tube P = Pipe Metal Components (omit) = Carbon Steel A = 0 Stainless Steel - HOM / T - D E C A / Application Tube O.D. Pipe A C D E F / - 0. 0.8 0.0 0. 0. 0.78 - / 0.0 0.8 0.8 0.0 0. 0.98 /8-0.7 0. 0. 0. 0. 0.8 - /8 0. 0.9 0.8 0.0 0. 0.98 / - 0.0 0.8 0.8 0.0 0. 0.98 - / 0.87..0 0. 0. 0.98 /8-0. 0.9 0.8 0.0 0. 0.98 / - 0.7.0 0.9 0. 0. 0.98 - /.0.. 0.7 0. 0.98 7/8-0.87..0 0. 0. 0.98 -..0 0.9 0. 0.98 -..7.8 0.8 0.. -/8 -....7 0.7 0. 0.98 -/ -... 0.77 0.. - -/... 0.99 0.. -/8 -.7.7.8 0.8 0.. -/ -..8. 0.9 0.. - -/.87...09 0.. -/8 -..9. 0.9 0.. -/ -.7...0 0.. -7/8 -.87...09 0.. -.87.8.9. 0.. -.7.88.9. 0.. -/8 -...9.7 0.. -/8 -.7.88.9. 0.. -/8 -..8..8 0.. Notes:. are in inches (mm).. are for general information only, all critical dimensions should be verified by requesting a certified print. PN#00800 / 0.7 / ACC0-7
CUSH Cushion Clamps STANDARD CLAMPS /8 7/8 øa C /8 7/8 / Cushion clamps are ideal for multiple line runs, while absorbing shock and vibration, reducing unwanted noise and preventing galvanic corrosion. Features Distortion free clamping Shock and vibration reduction Elimination of rotation Retrofit without disassembly Easy installation Control squeeze shoulder bolt prevents over tightening of the clamp assembly, preventing the possibility of crushing the tube. Fits standard -/8 wide mounting rail Clamp - carbon steel (with electro-dichromate finish) Cushion - thermoplastic elastomer Cushion material withstands the effect of most oils, chemicals and industrial cleaning solvents at temperatures -0 to 7 F. Mounting Rail Part Number: 007 Model Code: Cush Rail x Galvanized Material: Low gauge carbon steel Finish: Galvanized Length: Clamp - Stainless steel 0 Cushion - thermoplastic elastomer Mounting Rail Part Number: 07088 07 Model Code: Cush Rail / x 0 A Cush Rail x Material: Stainless steel 0 Galvanized Steel Length: 0 0 Model Code CUSH (Refer to table) Application T = Tube P = Pipe Metal Components (omit) = Carbon Steel A = 0 Stainless Steel PN#00800 / 0.7 / ACC0-7 CUSH / T - / Application Tube O.D. Pipe A C / - 0. 0. 0.98 - / 0. 0.98. /8-0.7 0.8. - /8 0.7.. / - 0.0 0.9. - / 0.8.9.8 /8-0..0. / - 0.7..8 - /.0..9 7/8-0.87..8 -..9 -..7. -/8 -..7.08 -/ -..7. - -/..7.7 -/8 -.7.8. -/ -..9.7 - -/.9..8 -/8 -..07. -/ -.7..7-7/8 -.87..8 -..0 -.7.8.7 -/8 -..7. -/8 -.7.8.7 -/ -..9.79 - -/.87..7 -/8 -..07.9-7/8 -.87..7 -.00.7. -.0.9.79 -/8 -..7. -/ -..9.7 -/ -.0.9.79 - -/.. -/8... -.. -..9.9 -/8 -..7. -/ -..9.9 -..0.9 -/8 -..7. -.7 7. -. 7.07 8. -/8 -..7 7. Notes:. are in inches (mm).. are for general information only, all critical dimensions should be verified by requesting a certified print. -
STANDARD CLAMPS HRGS uegu Clamps Part Legend A - uegu Clamp with Weld Plate. Hex Head olt uegu clamps are ideal for mobile applications where space is limited. They absorb shock and vibration, and reduce noise. Features Low Profile Design Shock and vibration reduction Easy installation Stirrup & Weld Plate - carbon steel Clamp ody - thermoplastic elastomer (Santoprene TPE 7) Temp Specifications -0 to 7 F (-0 to C). Stirrup. Sleeve. Rubber ody. Weld Plate Part Legend. Hex Head olt. Stirrup A - uegu Clamp without Weld Plate Model Code HRGS A D-D ST M HRGS 0A - (Refer to table) Application A = uegu clamp with top plate & weld plate A = uegu clamp without weld plate ATM = C-rail mounted uegu clamp ore Size (Refer to table) Metal Components (omit) = Carbon Steel A = 0 Stainless Steel Thread Type M = Metric. Sleeve. Rubber ody Part Legend. Hex Head olt. Stirrup. Sleeve. Rubber ody ATM - uegu Clamp - C-Rail Mounted. C-Rail Nut. C-Rail - PN#00800 / 0.7 / ACC0-7
HRGS STANDARD CLAMPS Slotted C 0. () 0. (9) A ød H H 0. () Plastic Cap 0.9 (.) 0.9 (0) 0.9 () ød 0. () ød H H 0.0 () 0.08 () 0. () 0.9 (ø0) A A 0. () 0. (). (8) Tube O.D. Pipe Size 0A 0 0C PN#00800 / 0.7 / ACC0-7 / - 0. (.) - /8-0.7 (9.) - - /8 0.9 (0.0) - / - 0. (.7) - - / 0. (.7) - /8-0. (.0) - - /8 0.7 (7.) - / - 0.7 (9.0) - - / 0.8 (.) - -.0 (.) - -/ -. (.0) - / - 0. (.) 0. (.) /8-0.7 (9.) 0.7 (9.) - /8 0.9 (0.0) 0.9 (0.0) / - 0. (.7) 0. (.7) /8-0. (.0) 0. (.0) - /8 0.7 (7.) 0.7 (7.) / - 0.7 (9.0) 0.7 (9.0) - / 0.8 (.) 0.8 (.) -.0 (.).0 (.) -/ -.0 (.0). (.0) ore Diameter* olt Size C ød ød A A H H 0. (). () 0.9 (0) 0.9 () 0.7 (8). (9) 0.7 ().0 (7) 0.9 (.). (7.).8 (0).97 (0) 0.9 (0) 0.9 ().8 (). (9) 0.7 ().0 (7) * Consult factory for sizes and with different bore diameters. Notes:. are in inches (mm).. are for general information only, all critical dimensions should be verified by requesting a certified print. 0.78 (0) M X 0.78 (0).9 ().8 (0) M8 X 0.78 (0) M X.8 (7).9 (8) 0.78 (0).9 ().8 (0) M8 X -
STANDARD CLAMPS HRRS U-olt Clamps Model Code HRRS Family Group - (Refer to table) Model HRRS 0 L 9.7 PP ST ZN (Refer to table) Clamp Material PP = Polypropylene (Standard) PA = Polyamide Metal Component Material ST = Carbon Steel A = 0 Stainless Steel A = Stainless Steel Material Finish Zn = Zinc Plated H Pipe ø A H H U-bolt clamps are a simple solution for securing pipes and other cylindrical objects. The clamps consist of a threaded U and a contoured saddle. Pipe ø D E L Features Metric Threads Easy installation H A Threaded U - zinc-plated carbon steel Saddle - polypropylene D E L H H - Group Pipe Size øa D E H H H L 0.7 (7.) 0.8 (.) /8 (9.) / (.7) 0.9 (). (). (). (0) 0.98 ().7 (0).0 (.9) / (9.).8 (0).7 (0).7 (70).9 (7) M0. (.7) (.). (8).89 (8).9 (7). (80).8 (0).7 (.) -/ (.8).8 (). ().9 (8). (90).97 (0).9 (8.) -/ (8.).0 (). (). (9).7 (9).7 (0.) (0.8). ().99 (7).9 (09). (0).8 () 7 (7.) -. (8). (0) M.7 (9).9 (). () 8. (88.9) (7.).7 (9).7 (0). (8).7 () 9. (.) (0.).7 (0). ().7 (7) 7.8 (90) 0. (9.7) (7).8 (8). () 7. (9) 8. (0). (80) M. (8.) (.).9 (7) 7. (9) 8. (7) 9.8 (0) 7. (9.7) 7 (77.8) 7.9 (0) 8.8 (8) 9.8 (9) 0. (70) 8. (9.) 8 (0.) 8.98 (8) 9.7 (8). (8). () 0.7 (7) 0 (). (8) M0.89 (0). ().7 (70).7 (.9) (0.8).07 ().8 (). (8). (0).9 (00) (.) (.).88 (78).8 (0) 7. () 8.9 (80) 7 (0.) (0.).8 (8) M 7.8 () 9.7 (87). (0) 8 0 (08) 0 (08) 0.87 (0).8 ().9 (89). (0) 9.97 (8) (8.8). (70). (00).9 (0) 7. (700) 0.98 (09) (09.).9 ().7 () 7. (700) 9. (70).98 (0) (0.).77 (80).9 (0) M0 7.9 (70) 9.9 (70).89 (80) 7.99 (7) 8 (7.) 8.7 (70) 9.9 (70).89 (80). (870) 0 (7) 0 (7) 0.9 (78).09 (8). (870).8 (90) Notes:. are in inches (mm).. are for general information only, all critical dimensions should be verified by requesting a certified print..77 ().97 (0). (0).7 (70) PN#00800 / 0.7 / ACC0-7
HU U-olt with Cushion Clamps STANDARD CLAMPS Designed for the tough jobs, the HU secures pipe runs to any flat surface. The U-olt traps and secures the cushion in place to prevent lateral movement, while nylon insert locknuts provide a positive lock. Features The cushion design provides total load distribution, allowing the U-olt to become a full contact hanger, eliminating knife-edge loading. Extremely cost effective, especially in larger sizes. U-olt - Steel with electro-galvanized finish or stainless steel* Cushion - Thermoplastic elastomer, rated from -0 to 7 F A D E Model Code HU (Refer to table) Application P = Pipe Metal Components (omit) = Carbon Steel A = Stainless Steel PN#00800 / 0.7 / ACC0-7 HU / P - Clamp Size G Pipe Size C øa C D E F G / / 0.8 0.80.0.0 0.7 0.8 / /.0 0.90.80.0 0.78 0.8 /-0 UNC-..0.0.70 0.9 0.8 -/ -/..7..0.08. -/ -/.90.0.80.0.9. /8- UNC-.7.7.... -/ -/.87.9.90.00.9...7... -/ -/..0.7.. /- UNC-..7..9.......0...87 7.7... /8-8 8 8.8.8 9.8... UNC- 0 0 0.7.08. 7.7.8. /-0.7 7.. 8.7.8. UNC- Notes:. are in inches (mm).. are for general information only, all critical dimensions should be verified by requesting a certified print. F -7
STANDARD CLAMPS HROS Oval Clamps Size 0 A ød ø. A Size - A ød Oval clamps are ideal for mobile applications where space is limited. One-piece, hinged polypropylene clamp body. H Features Low profile design Easy installation ød A ø.. PP - Polypropylene (standard) PA or others may be available Temp Specifications Polypropylene: - to 9 F (-0 to 90 C) Polyamide: 0 to 8 F (-0 to 0 C) Model Code HROS 0A to (Refer to table) Clamp ody ore Diameter (in/mm) (Refer to table) Clamp Material PP = Polypropylene PA = Polyamide -8 HROS KP.7 -.7 PP Nominal Clamp ød & ød Size Size ore Size* Tube O.D. Pipe A A H 0A 0. (.0) - - 0. 0.9 0.8 0. (.) / - (9) (.8) (7) 0. 0. (8.0) / - 0.7. (.) - (8) () 0. (8.0) / - 0 0.7 (9.) /8-0..07 0.8 () (7.) (7) 0.9 (0.0) - - 0.7 0.0 (0.) - /8 (8.) 0.7 (.0) - - 0.87.9 () (0.) - 0.0 (.7) / - 0.9 (0.0) - - 0C 0.0 (0.) - /8 0.9. 0.8 0.7 (.0) - - () (.) (7) 0.0 (.7) / - 0.9 0. (.) - / (.) 0. (.0) - -.8. 0.9 (.0) - - (0) (.) - 0. (.0) /8-0. (.0) - - 0.9 (.0) - - 0D 0. (.0) /8-0.7.7 0. 0.8 (7.) - /8 (9) (0) () 0.7 (8.0) - - 0.7 (9.0) / -. (0.) 0.79 (0.0) - - 0.8 (.) - / 0.87 (.0) 7/8 -..9 (8) (8.) - 0.98 (.0) - -.00 (.) - * D and D dimensions may have different bore sizes. listed are standard. Notes:. are in inches (mm).. are for general information only, all critical dimensions should be verified by requesting a certified print. PN#00800 / 0.7 / ACC0-7