GHz 6-Bit Digital Phase Shifter Module

Similar documents
S Band 7 Bit Digital Attenuator

0.5-4 GHz 6-Bit Digital Attenuator

S-band T/R Control Module

CMD175P GHz 5-Bit Digital Phase Shifter. Features. Functional Block Diagram. Description

GHz 6-Bit Digital Attenuator

GHz 6-Bit Digital Attenuator

Parameter Min Typ Max Units Frequency Range

MAPS Digital Phase Shifter 4-Bit, GHz. Features. Functional Schematic. Description. Pin Configuration 2. Ordering Information 1

2-20 GHz Driver Amplifier

DC-10GHz SPDT Reflective Switch

Parameter Min Typ Max Units Frequency Range

RF1. Parameter Min Typ Max Units Frequency Range

Parameter Min Typ Max Units Frequency Range

= +25 C, With Vee = -5V & Vctl = 0/-5V

Features. Parameter Min. Typ. Max. Units. Frequency Range 8 12 GHz Insertion Loss* db. Input Return Loss* 10 db

CMD187C GHz Driver Amplifier. Features. Functional Block Diagram. Description

1-24 GHz Distributed Driver Amplifier

Analog Devices Welcomes Hittite Microwave Corporation

CMD158C GHz Driver Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 5.0 V, T A = 25 o C, F = 11 GHz

DC-20 GHz SP4T Non-reflective Switch

9-10 GHz GaAs MMIC Core Chip

8-18 GHz Wideband Low Noise Amplifier

Elisra MMIC Catalog MMIC Catalog

6-18 GHz Low Phase Noise Amplifier

CMD282. DC-40 GHz 2-bit Digital Attenuator. Features. Functional Block Diagram. Description

Features OBSOLETE. Parameter Min. Typ. Max. Units. Frequency Range GHz Insertion Loss 5 7 db. Input Return Loss 16 db

9-10 GHz GaAs MMIC Core Chip

L-Band 6-Bit Digital Phase Shifter. GaAs Monolithic Microwave IC

CMD167P GHz Low Noise Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 3.0 V, T A = 25 o C, F=12 GHz

Digital Attenuator, 31.5 db, 6-Bit, TTL Driver, DC-4.0 GHz. Parameter Test Conditions Frequency Units Min Typical Max

CMD233C GHz Distributed Low Noise Amplifier. Features. Functional Block Diagram. Description

BROADBAND DISTRIBUTED AMPLIFIER

GHz Low Noise Amplifier

GHz Voltage Variable Attenuator (Absorptive)

4-8 GHz Low Noise Amplifier

CMD275P4 DC-26.5 GHz Low Phase Noise Amplifier

= +25 C, With Vee = -5V & VCTL= 0/-5V

CMD119P GHz Low Noise Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 3.6 V, T A = 25 o C, F=8GHz

CMD170P GHz Driver Amplifier. Features. Functional Block Diagram. Description

Features. Parameter Min. Typ. Max. Units. Frequency Range 8 12 GHz GHZ. Input Return Loss* GHZ 10 db

CMD157P GHz Low Noise Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 3.

CMD132P GHz Low Noise Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 3.

High Power Ka-Band SPDT Switch

CMD158P GHz Driver Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 5.

CMD283C GHz Ultra Low Noise Amplifier. Features. Functional Block Diagram. Description

Features. = +25 C, Vss= -5V, Vdd= +5V, Control Voltage= 0/ +5V, 50 Ohm System. Frequency Range GHz Insertion Loss* 4 6.

Features. Parameter Frequency (GHz) Min. Typ. Max. Units GHz GHz GHz. Attenuation Range GHz 15.

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

CMD158P GHz Driver Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 5.

Features. Parameter Frequency (GHz) Min. Typ. Max. Units GHz GHz GHz. Attenuation Range GHz 15.

Parameter Frequency Min. Typ. Max. Units GHz GHz Attenuation Range GHz 31.5 db

SHF Communication Technologies AG. Wilhelm-von-Siemens-Str. 23D Berlin Germany. Phone Fax

Features. DC - 18 GHz. Switching Transients DC - 18 GHz 12 mvpp

TGL4203-SM. DC - 30 GHz Wideband Analog Attenuator. Key Features. Measured Performance

HMC241AQS16 / 241AQS16E

Features. = +25 C, With 0/+5V Control, 50 Ohm System

Features. = +25 C, With 0/-5V Control, 50 Ohm system

HMC307QS16G / 307QS16GE. Features OBSOLETE. = +25 C, Vee = -5V & VCTL= 0/Vee. Parameter Frequency Min. Typical Max. Units DC - 1.

Features. = +25 C, With 0/-5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units. DC - 20 GHz 2

CHT4016 RoHS COMPLIANT

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20

9-10 GHz LOW NOISE AMPLIFIER

Parameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz Attenuation Range DC GHz 31.5 db

Features. = +25 C, With 0/-5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units

Features OBSOLETE. = +5V in a 50 Ohm System. Parameter Frequency Min. Typ. Max. Units DC GHz DC GHz

HMC468LP3 / 468LP3E v

v02.06 Insertion Loss INSERTION LOSS () C +85 C -40 C Isolation ISOLATION () Return Loss RETURN LOSS ()

Features DC DC DC - 14 DC Min Attenuation Attenuation > 5 db Min Attenuation Attenuation > 10 db

ASL 1005P3 Data Sheet Rev: 1.0 Apr 2017

Features. = +25 C, With 0/-5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units

Features. = +25 C, With 0/-5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units

Features. = +25 C, Vdd = +3V to +5V & Vctl = 0/Vdd (Unless Otherwise Stated)

GaAs MMIC devices are susceptible to Electrostatic Discharge. Use proper ESD precautions when handling these items.

Features. = +25 C, With 0/-5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units

HMC346MS8G / 346MS8GE

GaAs MMIC devices are susceptible to Electrostatic Discharge. Use proper ESD precautions when handling these items.

PRELIMINARY DATASHEET

PRELIMINARY DATASHEET

Features OBSOLETE. = +25 C, Vdd = +3V to +5V & Vctl = 0/Vdd (Unless Otherwise Stated) Parameter Frequency Min. Typical Max. Units

Features. = +25 C, Vee = -5V & VCTL= 0/Vee GHz GHz GHz. Attenuation Range DC GHz 31 db. DC - 1.

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

L-Band 6-Bit Digital Phase Shifter. GaAs Monolithic Microwave IC in SMD leadless package

1.0 6 GHz Ultra Low Noise Amplifier

OBSOLETE. Parameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz. Attenuation Range DC - 3 GHz 31 db

Parameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz GHz Attenuation Range DC - 5.

OBSOLETE. Parameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz Attenuation Range DC - 5.

GaAs MMIC devices are susceptible to Electrostatic Discharge. Use proper ESD precautions when handling these items.

Features. = +25 C, With Vee = -5V & VCTL= 0/-5V. Attenuation Range DC GHz 31.5 db

Features. = +25 C, Vdd = 7V, Vctl = 1V, Idd = 165mA*

GaAs MMIC devices are susceptible to Electrostatic Discharge. Use proper ESD precautions when handling these items.

MACP Temperature Compensated Directional RMS Power Detector GHz Rev. V1 Features Functional Schematic Description Pin Configuration 3

Insertion Loss INSERTION LOSS () C +85C -4C Normalized Attenuation (Only Major States are Shown)

= +25 C, with Vcc = +5V. Parameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz Attenuation Range DC GHz 31.

Features. = +25 C, With 0/-5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units GHz GHz

Features. Parameter Frequency Min. Typ. Max. Units. Return Loss Off State DC - 20 GHz 19 db

SHF Communication Technologies AG. Wilhelm-von-Siemens-Str. 23D Berlin Germany. Phone Fax

Features. = +25 C, 50 Ohm system. DC - 10GHz DC - 14 Ghz DC - 10 GHz DC - 14 GHz Return Loss DC - 14 GHz 5 10 db

Features. = +25 C, With 0/+5V Control, 50 Ohm System

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +10

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

Transcription:

5. 6.5 GHz 6-Bit Digital Phase Shifter Module Features Frequency Range: 5. to 6.5 GHz Low RMS Phase Error ~ 4 o 8.5 db Maximum Insertion Loss 23dBm Input P 1dB Integrated TTL driver SMA (RF) / D-type(control) interface 5V supply operation Module dimensions : 43 mm x 45mm x16 mm Typical Applications RADAR Instrumentation Test and measurement Functional diagram 6-bit Control +5V -5V TTL DRIVER RF1 RF2 Description The ASL27M2 is a 6-bit digital phase shifter GaAs MMIC module designed to operate from 5. to 6.5 GHz. The module features a integrated TTL driver that provides the necessary digital interface for a six bit control. The module operates on +5/-5V supply voltages with minimal current consumption. The phase shifter has a RMS phase error within 4 deg in the designated band. The insertion loss is 8.5 db (max.) and varies within 1.5 db over the band and the 64 states. The input power for 1 db compression is 23 dbm. The RF ports are well matched to 5 Ohms. The module is rugged in construction and uses SMA connectors for the RF ports and a 15-pin standard D-type connector for the control interface. Absolute Maximum Ratings (1) Parameter Absolute Maximum Units RF Input Power 3 dbm Positive Supply Voltage +6 V Negative Supply Voltage -6 V Control Voltage ON OFF +5 to +5.5 -.5 to V V Operating Temperature -4 to +85 ºC Storage Temperature -65 to +15 ºC 1. Operation beyond these limits may cause permanent damage to the component Page 1 of 9

Electrical Specifications @ TA = +25 C, Zo=5 Parameter Typ. Units Frequency Range 5. - 6.5 GHz Phase Shift 36 in 64 steps deg Phase Shift resolution 5.625 deg Insertion Loss (max.) 8.5 db RMS Phase Shift Error (max.) 4 deg Peak Phase Shift Error -12 to +1 deg Peak Amplitude Error +/-1.5 db Input Return loss, all states (max.) 1 db Output Return Loss, all states (max.) 9 db DC Supply +5/6, -5/3 V/mA DC Control Voltage ON OFF Switching speed 5 ns 5 V V Page 2 of 9

RF Performance TTL Control, 5 Ohm System, T A = +25 C 2 Peak Phase Error Over All States 15 1 PPE (deg) 5-5 -1-15 -2 12 RMS Error 1 RMS Error (deg) 8 6 4 RMS_Uncalibrated 2 RMS_Calibrated Page 3 of 9

RF Performance TTL Control, 5 Ohm System, T A = +25 C 2 Peak Phase Error - 4.5GHz to 6.5GHz PPE (deg) 16 12 8 4-4 -8-12 -16-2 3 6 9 12 15 18 21 24 27 3 33 36 39 42 45 48 51 54 57 6 63 State Insertion loss Over All States -2-4 IL (db) -6-8 -1-12 -14-16 Page 4 of 9

RF Performance TTL Control, 5 Ohm System, T A = +25 C Output return loss -1-2 S22 (db) -3-4 -5-6 Input return loss Over All States S11 (db) -5-1 -15-2 -25-3 -35-4 -45-5 Page 5 of 9

Mechanical Characteristics Units: Millimetres Note: 1. Standard 15-pin D-type connector is used for the control interface 2. SMA connectors are used for the RF ports 3. The RF ports are DC coupled Page 6 of 9

D type connector Pin Configuration 8 7 6 5 4 3 2 1 15 14 13 12 11 1 9 Pin No. Function 1 5.625 deg 2 11.25 deg 3 22.5 deg 4 45 deg 5 9 deg 6 18 deg 7 +5V 8-5V 9 NC 1 NC 11 NC 12 NC 13 NC 14 NC 15 NC Note: The 223121M1 module contains an internal driver that interfaces with the phase shifter. Page 7 of 9

Truth Table State Attenuation (db) TTL Control ( 1 = 3 to 5 V, = to.2 V ) 18 o 9 o 45 o 22.5 o 11.25 o 5.625 o (Pin 6 ) (Pin 5) (Pin 4) (Pin 3) (Pin 2) (Pin 1) 1 5.625 1 2 11.25 1 3 16.875 1 1 4 22.5 1 5 28.125 1 1 6 33.75 1 1 7 39.375 1 1 1 8 45 1 9 5.625 1 1 1 56.25 1 1 11 61.875 1 1 1 12 67.5 1 1 13 73.125 1 1 1 14 78.75 1 1 1 15 84.375 1 1 1 1 16 9 1 17 95.625 1 1 18 11.25 1 1 19 16.875 1 1 1 2 112.5 1 1 21 118.125 1 1 1 22 123.75 1 1 1 23 129.375 1 1 1 1 24 135 1 1 25 14.625 1 1 1 26 146.25 1 1 1 27 151.875 1 1 1 1 28 157.5 1 1 1 29 163.125 1 1 1 1 3 168.75 1 1 1 1 31 174.375 1 1 1 1 1 32 18 1 33 185.625 1 1 34 191.25 1 1 35 196.875 1 1 1 Page 8 of 9

Truth Table State Attenuation (db) TTL Control ( 1 = 3 to 5 V, = to.2 V ) 18 o 9 o 45 o 22.5 o 11.25 o 5.625 o (Pin 6 ) (Pin 5) (Pin 4) (Pin 3) (Pin 2) (Pin 1) 36 22.5 1 1 37 28.125 1 1 1 38 213.75 1 1 1 39 219.375 1 1 1 1 4 225 1 1 41 23.625 1 1 1 42 236.25 1 1 1 43 241.875 1 1 1 1 44 247.5 1 1 1 45 253.125 1 1 1 1 46 258.75 1 1 1 1 47 264.375 1 1 1 1 1 48 27 1 1 49 275.625 1 1 1 5 281.25 1 1 1 51 286.875 1 1 1 1 52 292.5 1 1 1 53 298.125 1 1 1 1 54 33.75 1 1 1 1 55 39.375 1 1 1 1 1 56 315 1 1 1 57 32.625 1 1 1 1 58 326.25 1 1 1 1 59 331.875 1 1 1 1 1 6 337.5 1 1 1 1 61 343.125 1 1 1 1 1 62 348.75 1 1 1 1 1 63 354.375 1 1 1 1 1 1 GaAs MMIC devices are susceptible to Electrostatic discharge. Proper precautions should be observed during handling, assembly & testing All information and Specifications are subject to change without prior notice Page 9 of 9