`bob`=p=^åèìáëáíáçå=råáí=bma qéåüåáå~ä=a~í~= båöäáëü
The new CEREC 3 generation for the computer-aided manufacture of ceramic restorations. CAD system for making high-precision optical impressions in the mouth. High-resolution, heated mouth scanning 3D camera with removable prism tube (prism tube sterilizable with hot air) Integrated image processing High processing performance Trackball, Input key and pedal, Easy-to-disinfect membrane keyboard (only requires wiping), Hard disk drive, DVD-R(W)/CD-R(W) drive, WLAN, configured for the CEREC MC XL milling unit Radio module for serial communication with the CEREC 3 milling unit 2 integrated loudspeakers. High-resolution 3D mouth scanning camera with control and image processing electronics: Measuring technique: Active triangulation Pixel size: 25 x 29 µm Low noise CCD sensor: 680 x 480 pixels (=326,400 pixels) Light source: Infrared, polarized, 840 nm Image acquisition: Philips PNX1300, 133MHz TriMediaTM a processor Image acquisition memory: 8MB ultrafast SDRAM Image processing: Intensity measurement of 1.4 mil. pixels in 0.133 sec. Image data transfer rate: Max. 38 MB/sec. Monitor: 17 TFT flat LCD display, true color, SXGA resolution (1280 x 1024 pixels) PC Hardware Special PC with: Processor Intel Core2Duo, E6600 Memory 2x 1024MB, 800MHz DDR2-RAM DVD-ROM/CD- R(W) SH-S182-D combination drive DVD RAM (12X), DVD+R (18X) / RW (8X), DVD-R(18X)/RW (6X), DVD+/-R DL (8X),CD-R (48X) / RW (32X) Hard disk Western Digital WD2500YS (250GB Serial-ATA) Frame Grabber card SIRONA Network card Ethernet 10/100/1000MBit/s onboard WLAN card: Linksys WMP54GS Standards: IEEE 802.11g, IEEE 802.11b, PCI 2.2, PCI 2.3 Transmitter power: 15dBm Approvals: FCC, Wi-Fi, CE, ICES-03 Sound card Realtek HD Audio onboard Graphics card NX8800GTS T2D640E (PCIe 16x, 640MB) DECT supply 60 81 942 D3344 Sirona PC power supply 450W with battery back-up function PC software Operating system: WINDOWS TM b XP Professional (English) Installation: The operating system and the applications are installed in the factory. a. TriMedia is a trademark of Philips. b. WINDOWS is a trademark of Microsoft Corporation. All units are integrated in a mobile housing with freely moving, lock-type castors (no water or air connection is required). 2 D 3344.021.02.01.02
Type designation CEREC 3 Acquisition Unit EPD Rated line voltage, USA 115V AC / 60Hz Rated current, USA 3.0A Type of protection against electric shock Class I device Type of protection against electric shock (3D camera) Application component of type BF Degree of protection against penetration of water normal device (without protection against ingress of water) Ambient temperature 10 C to 35 C Operating mode Storage battery pack for battery-backed operation continuous operation 24VDC / 2.5Ah Sirona Part No. 61 77 393 D3344 Dimensions W x H x D (in mm) 418 x 1110 x 570 Label: CAUTION Please read accompanying papers. Weight CEREC 3 without monitor and battery pack: Monitor: Battery pack: 36kg 4kg 3,5kg D 3344.021.02.01.02 3
Electromagnetic compatibility i NOTE The CEREC 3 Acquisition Unit fulfills all requirements for electromagnetic compatibility (EMC) compliant with IEC 60601-1- 2:2001. The CEREC 3 Acquisition Unit is referred to as "UNIT" in the following. Observance of the following information is necessary to ensure safe operation regarding EMC aspects. Accessories The UNIT may be operated only with accessories and spare parts approved by Sirona. Unapproved accessories and spare parts may lead to an increased emission of or a reduced immunity to interference. Electromagnetic emission The UNIT is intended for operation in the electromagnetic environment specified below. The customer or user of the UNIT should make sure that it is used in such an environment. The UNIT should not be operated immediately adjacent to other devices. If this proves to be unavoidable, the UNIT should be monitored to check and make sure that it is used properly. Emission measurement Conformity Electromagnetic environment guidelines HF emission according to CISPR 11 Group 1 The UNIT uses HF energy only for its internal function. The HF emission is therefore very low, and it is improbable that nearby electronic devices might be disturbed. HF emission according to CISPR 11 Harmonics according to IEC 61000-3-2 Class B Class A The UNIT is intended for use in all facilities, including residential areas and in any facilities connected directly to a public power supply providing electricity to buildings used for residential purposes. Voltage fluctuations / Flicker according to IEC 61000-3-3 compliant 4 D 3344.021.02.01.02
Immunity to interference The UNIT is intended for operation in the electromagnetic environment specified below. The customer or user of the UNIT should make sure that it is used in such an environment. Immunity interference tests IEC 60601-1-2 test level Conformance level Electromagnetic environment guidelines Electrostatic discharge (ESD) according to IEC 61000-4-2 ± 6kV contact discharge ± 8 kv air discharge ± 6kV contact discharge ± 8kV air discharge Floors should be made of wood or concrete or covered with ceramic tiling. If the floor surface consists of synethetic material, the relative humidity must be at least 30%. Electrical fast transient/burst according to IEC 61000-4-4 ± 1kV for input and output lines ± 2kV power cables ± 1kV for input and output lines ± 2kV power cables The quality of the supply voltage should conform to the typical business or hospital environment. Surge voltages according to IEC 61000-4-5 ± 1kV push-pull voltage ± 2kV push-pull voltage ± 1kV push-pull voltage ± 2kV push-pull voltage The quality of the supply voltage should conform to the typical business or hospital environment. Voltage dips, short interruptions and variations of the power supply according to IEC 61000-4-11 <5% U T for ½ period (>95% dip of U T ) 40% U T for 5 periods (60% dip of U T ) 70% U T for 25 periods (30% dip of U T ) <5% U T for 5sec. (>95% dip of U T ) The UNIT features a battery back-up function which enables continued operation for a short period of time following an interruption of the power supply. The quality of the supply voltage should correspond to the typical business or hospital environment. Magnetic field of power frequencies (50/ 60 Hz) according to IEC 61000-4-8 3 A/m 3 A/m The power frequency magnetic fields should correspond to the typical values found in the relevant business and hospital environment. Remarks: U T is the AC supply voltage prior to application of the test level. D 3344.021.02.01.02 5
Immunity interference tests IEC 60601-1-2 test level Conformance level Electromagnetic environment guidelines Conducted HF interference IEC 61000-4-6 3V eff 150 khz to 80 MHz a 3V eff Portable and mobile radio equipment must not be used within the recommended working clearance from the UNIT and its cables, which is calculated based on the equation suitable for the relevant transmission frequency. Recommended working clearance: d= [ 12, ] P Radiated HF interference IEC 61000-4-3 3V/m 80MHz to 800MHz a 3V/m 800MHz to 2.5GHz a 3V eff 3V eff d= [ 12, ] P at 80MHz to 800MHz d= [ 23, ] P at 800MHz to 2.5GHz where P is the nominal transmitter output in watts (W) specified by the transmitter manufacturer and d is the recommended working clearance in meters (m). The field strength of stationary radio transmitters is based on a local investigation for all frequencies b less than the conformance level for all frequencies c. Interference is possible in the vicinity of equipment bearing the following graphic symbol. a. The higher frequency range applies at 80MHz and 800MHz. b. The field strength of stationary transmitters such as the base stations of radio telephones and land mobile services, amateur radio stations as well as AM and FM radio and television broadcasting stations cannot be accurately predetermined. An investigation of the location is recommended to determine the electromagnetic environment resulting from stationary HF transmitters. If the field strength measured at the UNIT location exceeds the conformance level specified above, the UNIT must be observed with respect to its normal operation at each application site. If unusual performance characteristics are observed, it may be necessary to take additional measures such as reorientation or repositioning of the UNIT. c. A frequency range of 150kHz to 80MHz results in a field strength of less than 3V/m. 6 D 3344.021.02.01.02
Working clearances Recommended working clearances between portable and mobile HF communication devices and the UNIT The UNIT is intended for operation in an electromagnetic environment, where radiated HF interference is checked. The customer or the user of the UNIT can help prevent electromagnetic interference by duly observing the minimum distances between portable and/or mobile HF communication devices (transmitters) and the UNIT. These values may vary according to the output power of the relevant communication device as specified above. Nominal transmitter output [W] Working clearance according to transmission frequency [m] 150kHz to 80MHz 80MHz to 800MHz 800MHz to 2.5GHz d= [ 12, ] P d= [ 12, ] P d= [ 23, ] P 0,01 0,12 0,12 0,23 0,1 0,38 0,38 0,73 1 1,2 1,2 2,3 10 3,8 3,8 7,3 100 12 12 23 For transmitters whose maximum nominal output is not specified in the above table, the recommended working clearance d in meters (m) can be determined using the equation in the corresponding column, where P is the maximum nominal output of the transmitter in watts (W) specified by the transmitter manufacturer. Annotation 1 The higher frequency range applies at 80 MHz and 800 MHz. Annotation 2 These guidelines may not be applicable in all cases. The propagation of electromagnetic waves is influenced by their absorption and reflection by buildings, objects and persons. D 3344.021.02.01.02 7
té=êéëéêîé=íüé=êáöüí=íç=ã~âé=~åó=~äíéê~íáçåë=ïüáåü=ã~ó=äé=çìé=íç=íéåüåáå~ä=áãéêçîéãéåíëk «=páêçå~=aéåí~ä=póëíéãë=dãäe=ommt péê~åüéw=éåöäáëåü= mêáåíéç=áå=déêã~åó a=ppqqkmonkmokmnkmo===mokommt ûkjkêkw= MMM=MMM fãéêáã =Éå=^ääÉã~ÖåÉ páêçå~=aéåí~ä=póëíéãë=dãäe áå=íüé=rp^w c~äêáâëíê~ É=PN páêçå~=aéåí~ä=póëíéãë=ii` SQSOR=_ÉåëÜÉáã QUPR=páêçå~=aêáîÉI=pìáíÉ=NMM déêã~åó `Ü~êäçííÉI=k`=OUOTP ïïïkëáêçå~kåçã rp^ áå=`~å~ç~w páêçå~=`~å~ç~ PORM=oáÇÖÉï~ó=aêáîÉ=J=råáí=R jáëëáëë~ìö~i=låí~êáç=iri=rvs `~å~ç~ lêçéê=kç SN=TT=OTU=a=PPQQ