Inserton/Extracton Tool 91285-1 and Replacement Tp Kts 543382-[ ] Instructon Sheet 408-9404 19 JUN 12 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand tools. Hand tools are ntended for occasonal use and low volume applcatons. A wde selecton of powered applcaton equpment for extended-use, producton operatons s avalable. Inserton/Extracton Handle Cap [.050 In.] Hex Wrench Plug Inserton/Extracton Tps CONTACT SIZE WIRE SIZE (AWG) INSERTION/EXTRACTION TIPS COLOR CODE TYPE PART NUMBER HD-20 28-20 Yellow Inserton 543382-5 HD-20 24-18 Red Extracton 1-543382-0 HD-20 28-24 Brown Extracton 1-543382-1 HD-20 Posted Blue Extracton 543382-6 HD-20 Posted Black Inserton 543382-7 HD-20 28-22 Green Inserton/Extracton 543382-8 Fgure 1 1. INTRODUCTION Ths nstructon sheet covers the use of Inserton/ Extracton Tool 91285-1 and Replacement Tp Kts 543382 shown n Fgure 1. The tool s desgned to nsert and extract HD-22 and HD-20 contacts used n AMPLIMITE* Hgh Densty (HD) Connectors. For nformaton concernng the assembly of AMPLIMITE HD connectors, refer to the nstructon sheet packaged wth the connector. Read these nstructons thoroughly before usng the tool. See Secton 6, REVISION SUMMARY, for revson nformaton. All dmensons on ths document are n metrc unts [wth U.S. customary unts n brackets]. Fgures and llustratons are for reference only and are not drawn to scale. 2. DESCRIPTION (Fgure 1) The nserton/extracton tool conssts of a handle, a cap, sx nserton/extracton tps, a plug, and a [.050 n.] hex wrench. The handle of the tool provdes storage for the tps, plug, and hex wrench. The nserton/extracton tps convert the tool for the approprate product and are used to nsert or extract connector contacts. Each tp s color coded accordng to specfc type and wre sze. The plug s nserted nto the wdest end of the tp to prevent damage to the tp when t s secured n the tool handle. The hex wrench s used to tghten the setscrew whch secures the tp n the tool handle. 2011 Tyco Electroncs Corporaton, a TE Connectvty Ltd. Company TOOLING ASSISTANCE CENTER 1-800-722-1111 All Rghts Reserved PRODUCT INFORMATION 1-800-522-6752 TE logo s a trademark. *Trademark. Other products, logos, and company names mght be trademarks of ther respectve owners. Ths controlled document s subject to change. For latest revson and Regonal Customer Servce, vst our webste at www.te.com 1 of 6 LOC B
Inserton/Extracton Tp Wre Slot (Ref) Inserton/Extracton Handle Plug Setscrew (Ref) Bottom of Tool (Ref) Fgure 2 3. TOOL ASSEMBLY (Fgure 2) Refer to Fgure 1 and select the approprate contact, wre sze, and nserton/extracton tp. Proceed as follows: 1. Insert plug nto the wdest end of the nserton/ extracton tp. 2. Slde the nserton/extracton tp nto the end of the tool handle wth the orentaton latch postoned toward the bottom of the tool. 3. Usng the hex wrench, tghten the setscrew to secure the tp n the tool handle. 4. INSERTION/EXTRACTION PROCEDURES 4.1. Insertng A Wre Crmped Contact (Fgure 3) 1. Poston tool handle between thumb and fngertps, then place wre over the wre slot of the tp. Hold wre n ths poston wth your thumb. Back of Receptacle Connector 205439-1 Butt Tool Tp Aganst Contact Shoulder Wre Inserton Tp Contact Cavty Wre Slot Inserton Handle Fgure 3 2 of 6
2. Slde thumb over the wre toward the end of the tp. The wre must be postoned nsde the wre slot of the tp. 3. Slde tp over contact wre barrel untl the tp butts aganst the contact shoulder. 4. Algn contact wth the BACK of the contact cavty. Push contact straght nto the contact cavty untl the contact bottoms. 5. Remove the nserton tool; then pull back on the wre to ensure that the contact s locked nto the contact cavty. 4.2. Extractng A Wre Crmped Contact (Fgure 4) 1. Poston tool handle between thumb and fngertps, and algn contact wre wth the wre slot on the tp. Hold wre n ths poston wth your thumb. 2. Slde your thumb over the wre toward the end of the nserton tp. The wre must be postoned nsde the wre slot of the tp. 3. Place tp over the contact post or crmp barrel and slde the tp straght nto the contact cavty untl the tp bottoms aganst the contact shoulder. 4. Holdng the wre tght aganst the tool handle, pull back on the tool handle to extract the contact. If you experence dffculty n extractng the contact, repeat Steps 1 through 4. 4.3. Insertng A Posted Contact (Fgure 5) 1. Place the contact n the contact cavty. Do NOT push on the contact post. 2. Poston the tp over the contact post. Move the tool along the post untl the tp butts aganst the contact stablzer. Algn the tp on the stablzer as shown n Fgure 5. 3. Hold the tool handle, and push the contact post to make certan that the contact s locked n the cavty. Contacts wth tal lengths longer than 10.85 mm [.427 n.] must use yellow color coded nserton tps Back of Receptacle Connector 205439-1 (Ref) Wre Slde Extracton Tp Over Contact Post or Crmp Barrel Wre Slot Extracton Handle Fgure 4 3 of 6
Back of Connector (Ref) Contact Cavty Contact Post Inserton Tp Butt Tool Tp Aganst Contact Stablzer Fgure 5 4.4. Extractng A Posted Contact (Fgure 6) 1. Place the extracton tp over the contact post. Move the tool along the post untl the tp enters the contact cavty. 2. Algn the groove of the extracton tp wth the contact stablzer as shown n Fgure 6. 3. Push the tp past the stablzer and straght nto the cavty untl t bottoms. 4. For a receptacle style connector, nsert a 1.02 mm [.040 n.] dameter pn straght nto the FRONT of the contact cavty. For a plug style connector, push on matng tp of contact wth a sutable devce. 5. Apply pressure to remove the contact and tool from the contact cavty. 5. TOOL INSPECTION/REPLACEMENT (Fgure 7) Inserton/Extracton Tool s nspected before shpment. Tyco Electroncs recommends that the tool be nspected mmedately upon ts arrval to ensure that the tool has not been damaged durng shpment, and that the tool conforms to the dmensons provded n Fgure 7.Customer-replaceable parts are provded n Fgure 7. If the tool becomes broken or damaged, replacement and/or spare parts can be purchased by contactng: CUSTOMER SERVICE (038-035) TYCO ELECTRONICS CORPORATION PO BOX 3608 HARRISBURG PA 17105-3608 For tool repar servce, please contact an Tyco Electroncs Representatve at 1-800-526-5136. 6. REVISION SUMMARY Snce the prevous release, the TE Connectvty logo has been appled. 4 of 6
1.02 [.040] Pn Da. Back of Connector Contact Post Extracton Tp Groove of Extracton Tp Algned wth Contact Stablzer Fgure 6 5 of 6
REPLACEMENT PARTS ITEM COLOR CODE PART NUMBER DESCRIPTION 1 Yellow 543382-5 TIP, Inserton 2 Blue 543382-6 TIP, Extracton 3 Black 543382-7 TIP, Inserton 4 Green 543382-8 TIP, Inserton/Extracton 5 Red 1-543382-0 TIP, Extracton 6 Brown 1-543382-1 TIP, Extracton 7 ----- 2-21006-0 SCREW, Set No. 4-40 X.180 Lg. 8 ----- 2-26538-5 CAP Avalable n packs of 25 only (one plug ncluded n each packet). Fgure 7 6 of 6