Rotating Anode X-ray Tube Assembly Product Information PI ROTANODE E7252X E7252FX E7252GX High speed rotating anode X-ray tube assembly for high energy radiographic and cine-fluoroscopic operations. The heavy anode is constructed with specially processed rhenium-tungsten faced molybdenum target which is 74 mm diameter and has an improved coating to increase thermal emissivity. These tubes have foci 1.2 and.6, and are available for a maximum tube voltage 15 kv. Accommodated with IEC6526 type high-voltage cable receptacles. General Data IEC Classification (IEC661-1:25)... Class Ⅰ ME EQUIPMENT Electrical: Circuit: High Voltage Generator... Constant Potential High-Voltage Generator Grounding... Center-grounded Nominal X-ray Tube Voltage (IEC6613:21): Radiographic... 15 kv Fluoroscopic... 125 kv Nominal Focal Spot Value (IEC6336:25): Large Focus... 1.2 Small Focus....6 Nominal Anode Input Power (at.1s) : 5 Hz 6 Hz 18 Hz Large Focus... 4.6 kw 44.6 kw 75 kw Small Focus... 14.2 kw 16 kw 27 kw Nominal Radiographic Anode Input Power (IEC6613:21): 5 Hz 6 Hz 18 Hz Large Focus... 36 kw 4 kw 7 kw Small Focus... 14.2 kw 16 kw 27 kw The information contained herein is presented only as a guide for the applications of our products. No Responsibility is assumed by TOSHIBA ELECTRON TUBES & DEVICES CO.,LTD.(TETD) for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TETD or others. The information contained herein may be changed without prior notice. It is therefore advisable to contact TETD before proceeding with the design of equipment incorporating this product.
Motor Ratings: 1) Stator: XS-AL Starting Running Driven Frequency [Hz] 18 2) 6 18 2) 6 Input Power [W] 11 91 83 83 Voltage 4) 6) [V] 22 13 6 4 Current 5) [A] 5.7 7.8 1.6 2.3 Min. Speed Up 2) 8) [s] 1.2.8 - - Capacitor [µf] 6 44 6 44 Min. Braking 3) 8) [s] 3 / 9 V (DC) Stator Resistance: Common-Main Winding... 9.4 Ω Common-Auxiliary Winding... 28.3 Ω Stator: XS-RA Starting Running Driven Frequency [Hz] 18 2) 5/6 18 2) 5/6 Input Power [W] 23 145 3 8 Voltage 4) 6) [V] 46 24 13 58 Current 5) [A] 5.4 6.5 2. 1.5 Min. Speed Up 2) 8) [s] 1..6 - - Capacitor [µf] 3 24 3 24 Min. Braking 3) 8) [s] 1.5 / 9 V (DC) Stator Resistance: Common-Main Winding... 27.5 Ω Common-Auxiliary Winding... 58. Ω Note 1) To be obtained with AID starter Model 6/18. 2) The speed up time from normal speed to high speed is 2/3 times of the specified speed up time from to high speed, which is described on motor rating table. 3) To be applied for high speed rotation. 4) Applied voltage between common and main terminal. 5) Common current. 6) The every applied voltage must be never exceeded 11% of the above specification. 7) No more than two high speed starts per minute are permissible. 8) The speed-up time is allowed up to 11% of the above specification. Anode Speed: 5 Hz... Minimum 27 min -1 6 Hz... Minimum 32 min -1 18 Hz... Minimum 97 min -1 Resistance between Housing and Low Voltage Terminals... Minimum 2 MΩ Normal Operating Range of the Housing Temperature... 16 ~ 75 C Mode of Operation... Intermittent - 2 -
Mechanical: Dimensions... See dimensional outline Overall Length... 476 mm Maximum Diameter... 152.4 mm Target: Anode Angle... 12 degrees Diameter... 74 mm Construction... Rhenium-Tungsten faced Molybdenum Filtration: Permanent Filtration....9 mm Al / 75 kv IEC6522:1999 Available Additional Filter combination (.4-1.5 mm)... Maximum 2.4 mm Al / 75 kv Radiation Protection (In accordance with IEC661-1-3:28): Leakage Technique Factor... 15 kv, 3.4 ma X-ray Coverage... 43 43 mm at SID 1 mm Weight (Approx.)... 18 kg High Voltage Receptacle... To meet the requirements of IEC6526 Corrigendum1:21 Cooling Method... Natural or forced air Tube Housing Model Number: E7252X... XH-16V E7252FX... XH-181 E7252GX... XH-18-3 -
Absolute Maximum and Minimum Ratings (At any time, these values must not be exceeded.) Maximum X-ray Tube Voltage (IEC6613:21): Radiographic... 15 kv Fluoroscopic... 125 kv Between Anode (or Cathode) and Ground... 75 kv Minimum X-ray Tube Voltage... 4 kv Maximum X-ray Tube Current (IEC6613:21)... See rating charts Large Focus... 1 ma Small Focus... 4 ma Maximum Filament Current: Large Focus... 5.5 A Small Focus... 5.2 A Filament Voltage: Large Focus (At maximum filament current 5.5 A)... 12.7 ~ 17.1 V Small Focus (At maximum filament current 5.2 A)... 6.3 ~ 8.5 V Filament Frequency Limits... ~ 25 khz Continuous Anode Input Power (IEC6613:21)... 12 W (169 HU/s) (Fluoroscopic, repeated radiographic or mixed exposure) Thermal Characteristics: Anode Heat Content... 21 kj (3 khu) Maximum Anode Heat Dissipation... 475 W (667 HU/s) X-ray Tube Assembly Heat Content... 9 kj (125 khu) Nominal Continuous Input Power (IEC6613:21): Without Air-circulator... 2 W (16 khu/min) - 4 -
Environmental Limits Operating Limits: Temperature... 1 ~ 4 Humidity... 3 ~ 85 % (No condensation) Atmospheric Pressure... 7 ~ 16 kpa Shipping and Storage Limits: Temperature... -2 ~ 7 Humidity... 2 ~ 9 % (No condensation) Atmospheric Pressure... 5 ~ 16 kpa - 5 -
Maximum Rating Charts (Absolute Maximum Rating Charts) Conditions: Tube Voltage Constant Potential High-Voltage Generator Stator Power Frequency 5 Hz 8 7 6 5 4 3 2 6kV 7kV 8kV 9kV 1kV 11kV 125kV 15kV Nominal Focal Spot Value: 1.2 5kV 4kV 1.1.2.3.5.1.2.3.5 1 2 3 5 1 EXPOSURE TIME [s] Refer to IEC6613:21 3 Nominal Focal Spot Value:.6 5kV 4kV 25 2 15 1 6kV 7kV 8kV 9kV 1kV 11kV 125kV 15kV 5.1.2.3.5.1.2.3.5 1 2 3 5 1 EXPOSURE TIME [s] Refer to IEC6613:21-6 -
Maximum Rating Charts (Absolute Maximum Rating Charts) Conditions: Tube Voltage Constant Potential High-Voltage Generator Stator Power Frequency 6Hz 8 7 6kV 7kV Nominal Focal Spot Value: 1.2 5kV 4kV 6 5 4 3 2 8kV 9kV 1kV 11kV 125kV 15kV 1.1.2.3.5.1.2.3.5 1 2 3 5 1 EXPOSURE TIME [s] Refer to IEC6613:21 Nominal Focal Spot Value:.6 3 6kV 5kV 4kV 25 7kV 2 15 1 8kV 9kV 1kV 11kV 125kV 15kV 5.1.2.3.5.1.2.3.5 1 2 3 5 1 EXPOSURE TIME [s] Refer to IEC6613:21-7 -
Maximum Rating Charts (Absolute Maximum Rating Charts) Conditions: Tube Voltage Constant Potential High-Voltage Generator Stator Power Frequency 18Hz Nominal Focal Spot Value: 1.2 1 9 8 9kV 1kV 11kV 8kV 7kV 6kV 5kV 4kV 7 6 5 4 3 2 1 125kV 15kV.1.2.3.5.1.2.3.5 1 2 3 5 1 EXPOSURE TIME [s] Refer to IEC6613:21 Nominal Focal Spot Value:.6 4 35 3 25 2 15 1 8kV 9kV 1kV 11kV 125kV 15kV 7kV 6kV 5kV 4kV 5.1.2.3.5.1.2.3.5 1 2 3 5 1 EXPOSURE TIME [s] Refer to IEC6613:21-8 -
Emission & Filament Characteristics Constant Potential High-Voltage Generator Nominal Focal Spot Value: 1.2 1 16 9 1KV 8 7 6 5 4 3 2 Ef 125KV 15KV 8KV 6KV 14 12 1 8 FILAMENT VOLTAGE [V] 1 4KV 6 3.9 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.5 FILAMENT CURRENT [A] Note1) For Reference Only Note2) Refer to IEC6613:21 Nominal Focal Spot Value:.6 4 1 8KV 1KV 3 2 1 Ef 125KV 15KV 6KV 8 6 4 FILAMENT VOLTAGE [V] 4KV 2 3.6 3.8 4. 4.2 4.4 4.6 4.8 5. 5.2 FILAMENT CURRENT [A] Note1) For Reference Only Note2) Refer to IEC6613:21-9 -
Thermal Characteristics X-ray Tube Assembly Heating / Cooling Curve 9 8 2W HEAT STORAGE [kj] 7 6 5 4 3 2 COOLING 1 HEATING 6 12 18 24 3 36 TIME [min] Anode Heating / Cooling Curve 21 2 18 16 COOLING 475W(667HU/S) HEAT STORAGE [kj] 14 12 1 8 6 4 2 HEATING 2 4 6 8 1 12 TIME [min] The heating curves are showing examples of average input power to the anode in operation. - 1 -
Dimensional Outline of E7252X Unit mm φ14 4-M6 8 DEEP 4-M5 1 DEEP φ152.4 φ74 45 9 ANODE 9 11.1 11.1 125.4 12 CENTRAL RAY AND REFERENCE AXIS 18 L S C 134.5 146.5 237 239 476 CATHODE FOCAL SPOT TERMINAL CONNECTIONS 53 (φ7) 111 81 C1 1 2 3 4 5 6 7 8 9 E M A NC NC NCNC TEMPERATURE RELAY (NORMALLY CLOSED) ET Note) Do not connect terminal No.1 and No.5 or No.6 in series circuit. (71) 2-M63.5 P=1.27 ( 192) EXPLANATION OF SYMBOLS CATHODE TERMINAL C :COMMON L :LARGE FOCUS S :SMALL FOCUS TERMINAL CONNECTIONS C1:COMMON M :MAIN WINDING OF THE STATOR A :AUX. WINDING OF THE STATOR NC:NON-CONNECTION ET:EARTH TERMINAL A B -1.5mm A 1.5mm -1.5mm B 1.5mm CENTER OF FOCAL SPOT :CENTRAL X-RAY ANODE & CATHODE TERMINAL :IEC6526 TYPE - 11 -
Dimensional Outline of E7252FX Unit mm φ14 ANODE S C L CENTRAL RAY AND REFERENCE AXIS 12 18 476 237 239 134.5 146.5 11.1 11.1 φ74 45 φ152.4 9 9 4-M6 8 DEEP 4-M5 1 DEEP 125.4 CATHODE TERMINAL CONNECTIONS 1 2 3 4 5 6 7 8 9 E FOCAL SPOT C1 M A NC NC NC NC TEMPERATURE RELAY (NORMALLY CLOSED) ET Note) Do not connect terminal No.1 and No.5 or No.6 in series circuit. 111 81 53 (φ7) A CENTER OF FOCAL SPOT 2-M63.5 P=1.27 (71) B ( 192) -1.5mm A 1.5mm -1.5mm B 1.5mm EXPLANATION OF SYMBOLS CATHODE TERMINAL C :COMMON L :LARGE FOCUS S :SMALL FOCUS TERMINAL CONNECTIONS C1:COMMON M :MAIN WINDING OF THE STATOR A :AUX. WINDING OF THE STATOR NC:NON-CONNECTION ET:EARTH TERMINAL :CENTRAL X-RAY ANODE & CATHODE TERMINAL :IEC6526 TYPE - 12 -
Dimensional Outline of E7252GX Unit mm TERMINAL CONNECTIONS 2-M63.5 P=1.27 111 (φ7) 1 2 3 4 5 6 7 8 9 E NC NC NC NC C1 M A TEMPERATURE RELAY (NORMALLY CLOSED) ET FOCAL SPOT (192) Note) Do not connect terminal No.1 and No.5 or No.6 in series circuit. 81 53 (71) φ14 ANODE CATHODE CENTRAL RAY AND REFERENCE AXIS 18 12 476 239 237 134.5 146.5 φ152.4 φ74 45 9 L C 9 S 4-M6 8 DEEP 125.4 4-M5 1 DEEP EXPLANATION OF SYMBOLS CATHODE TERMINAL C :COMMON L :LARGE FOCUS S :SMALL FOCUS TERMINAL CONNECTIONS C1:COMMON M :MAIN WINDING OF THE STATOR A :AUX. WINDING OF THE STATOR NC:NON-CONNECTION ET:EARTH TERMINAL A B -1.5mm A 1.5mm -1.5mm B 1.5mm CENTER OF FOCAL SPOT :CENTRAL X-RAY ANODE & CATHODE TERMINAL :IEC6526 TYPE - 13 -
OVERSEAS SUBSIDIARIES AND AFFILIATES EU REPRESENTATIVE TOSHIBA ELECTRONICS EUROPE GMBH HANSAALLEE 181 4549 DÜSSELDORF, GERMANY PHONE +49 (211) 5296-17 FAX +49 (211) 5296-42 For Sales & Technical Services, please contact the following representative: TOSHIBA ELECTRONICS EUROPE GMBH HANSAALLEE 181 4549 DÜSSELDORF, GERMANY PHONE +49 (211) 5296-17 FAX +49 (211) 5296-42 TOSHIBA AMERICA ELECTRONIC COMPONENTS, INC. 215 EAST LAKE COOK ROAD, SUITE 31 BUFFALO GROVE, ILLINOIS 689 USA PHONE +1 (847) 484-24 FAX +1 (847) 541-7287 TOSHIBA ELECTRON DEVICES & MATERIALS (SHANGHAI) CO., LTD. (TEMS) RM166, SH-PLAZA, No.336, XIZANG ROAD (MIDDLE), SHANGHAI, 21, CHINA PHONE +86 (21) 6361-77 FAX +86 (21) 6351-576 (Product Development Engineering Department) 1385 SHIMOISHIGAMI, OTAWARA-SHI, TOCHIGI-KEN, 324-855, JAPAN PHONE: +81-287-26-6666 FAX: +81-287-26-66 http://www.toshiba-tetd.co.jp/ Toshiba Electron Tubes & Devices Co., Ltd. meets the Environmental Management System Standard, ISO141. Toshiba Electron Tubes & Devices Co., Ltd. meets internationally recognized Standards for Quality Management System ISO91, ISO13485.