v2.1 DIVIDE-BY-, DC - 13 GHz Typical Applications Prescaler for DC to Ku Band PLL Applications: Point-to-Point / Multi-Point Radios VSAT Radios Fiber Optic Test Equipment Space & Military Functional Diagram Features Ultra Low SSB Phase Noise: -151 dbc/hz Wide Bandwidth Output Power: 7 dbm Single DC Supply: +5V 8 Lead Hermetic SMT Package General Description Electrical Specifications, T A = +25 C, 5 Ohm System, Vcc = 5V The is a low noise Divide-by- Static Divider with InGaP GaAs HBT technology in an 8 lead glass/metal (hermetic) surface mount hermetic package. This device operates from DC (with a square wave input) to 13 GHz input frequency with a single +5V DC supply. The low additive SSB phase noise of -151 dbc/hz at 1 khz offset helps the user maintain good system noise performance. Parameter Conditions Min. Typ. Max. Units Maximum Input Frequency 13 1 GHz Minimum Input Frequency Sine Wave Input. [1].2.5 GHz Input Power Range Fin = 1 to 11 GHz -15 >-2 +1 dbm Fin = 11 to 12 GHz -1 >-15 +5 dbm Fin = 12 to 13 GHz -5 >-8 dbm Output Power Fin = 13 GHz 3 7 dbm Reverse Leakage Both RF Outputs Terminated 5 db SSB Phase Noise (1 khz offset) Pin = dbm, Fin = 6 GHz -151 dbc/hz Output Transition Time Pin = dbm, Fout = 882 MHz 1 ps Supply Current (Icc) 12 ma 1. Divider will operate down to DC for square-wave input signal. - 1 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, 182Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 978-25-333 Fax: 978-25-3373 Phone: Order 781-329-7 On-line at www.hittite.com Application Support: Phone: 978-25-333 Application or apps@hittite.com
v2.1 DIVIDE-BY-, DC - 13 GHz Input Sensitivity Window, T= 25 C INPUT POWER (dbm) 2 1-1 -2-3 Recommended Operating Window 1 2 3 5 6 7 8 9 1 11 12 13 1 15 16 17 Output Power vs. Temperature OUTPUT POWER (dbm) Output Harmonic Content, Pin= dbm, T= 25 C OUTPUT LEVEL (dbm) 1 8 6 2-1 -2-3 - + 25C + 85C - C 3 6 9 12 15 Pfeedthru 2nd Harmonic 3rd Harmonic Input Sensitivity Window vs. Temperature INPUT POWER (dbm) 2 1-1 -2-3 Min Pin + 25C Max Pin + 25C Min Pin + 85C Max Pin + 85C Min Pin -C Max Pin -C 1 2 3 5 6 7 8 9 1 11 12 13 1 15 16 17 SSB Phase Noise Performance, Pin= dbm, T= 25 C SSB PHASE NOISE (dbc/hz) -2 - -6-8 -1-12 -1-16 1 2 1 3 1 1 5 1 6 1 7 OFFSET FREQUENCY (Hz) Reverse Leakage, Pin= dbm, T= 25 C POWER LEVEL (dbm) -1-2 -3 - -5 Both Output Ports Terminated One Output Port Terminated -5 3 6 9 12 15-6 3 6 9 12 15 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, 182Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 978-25-333 Fax: 978-25-3373 Phone: Order 781-329-7 On-line at www.hittite.com Application Support: Phone: 978-25-333 Application or apps@hittite.com - 2
v2.1 DIVIDE-BY-, DC - 13 GHz Output Voltage Waveform, Pin= dbm, Fout= 882 MHz, T= 25 C AMPLITUDE (mv) 7 5 3 1-1 -3-5 -7 22.7 23.1 23.5 23.9 2.3 2.7 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing TIME (ns) Absolute Maximum Ratings RF Input (Vcc = +5V) +13 dbm Vcc +5.5V Junction Temperature (T j ) 135 C Continuous Pdiss (T = 85 C) (derate 12.5 mw/ C above 85 C) 625 mw Thermal Resistance (R TH ) (junction to ground paddle) 8 C/W Storage Temperature -65 to -15 C Operating Temperature - to +85 C Typical Supply Current vs. Vcc Vcc (V) Icc (ma).75 11 5. 12 5.25 13 Note: Divider will operate over full voltage range shown above NOTES: 1. PACKAGE MATERIAL: ALUMINA LOADED BOROSILICATE GLASS. 2. LEAD, BASE, COVER MATERIAL: KOVAR (#752 CORNING). 3. PLATING: ELECTROLYTIC GOLD 5 MICROINCHES MIN., OVER ELECTROLYTIC NICKEL 5 MICROINCHES MIN.. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES: ±.5 [.13] UNLESS OTHERWISE SPECIFIED. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. - 3 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, 182Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 978-25-333 Fax: 978-25-3373 Phone: Order 781-329-7 On-line at www.hittite.com Application Support: Phone: 978-25-333 Application or apps@hittite.com
v2.1 DIVIDE-BY-, DC - 13 GHz Pin Description Pin Number Function Description Interface Schematic 1 IN RF Input must be DC blocked. 2, 6 N/C No connection. 3 IN GND RF Input 18 out of phase with pin 1 for differential operation. AC ground for single ended operation. Ground: Backside of package has exposed metal ground which must be connected to a RF/DC ground. 5 OUT Divided output 18 out of phase with pin 7. 7 OUT Divided Output. 8 VCC Supply voltage 5V ±.25V. For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, 182Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 978-25-333 Fax: 978-25-3373 Phone: Order 781-329-7 On-line at www.hittite.com Application Support: Phone: 978-25-333 Application or apps@hittite.com -
v2.1 DIVIDE-BY-, DC - 13 GHz Evaluation PCB List of Materials for Evaluation PCB 16582 [1] Item J1 - J3 C1 - C C5 C6 U1 PCB [2] Description PCB Mount SMA RF Connector 1 pf Capacitor, 2 Pkg, 1 pf Capacitor, 63 Pkg. 1 μf Tantalum Capacitor Divide-by- 1658 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 35 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 5 Ohm impedance while the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. This evaluation board is designed for single ended input testing. J2 and J3 provide differential output signals. - 5 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, 182Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 978-25-333 Fax: 978-25-3373 Phone: Order 781-329-7 On-line at www.hittite.com Application Support: Phone: 978-25-333 Application or apps@hittite.com
v2.1 DIVIDE-BY-, DC - 13 GHz Application Circuit For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, 182Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 978-25-333 Fax: 978-25-3373 Phone: Order 781-329-7 On-line at www.hittite.com Application Support: Phone: 978-25-333 Application or apps@hittite.com - 6