BCR8... PNP Silicon Digital Transistor Switching circuit, inverter, interface circuit, driver circuit Built in bias resistor (R = kω, R = kω) BCR8S / U: Two internally isolated transistors with good matching in one multichip package BCR8S / U: For orientation in reel see package information below Pb-free (RoHS compliant) package Qualified according AEC Q BCR8 BCR8W BCR8S BCR8U C C B E 6 5 4 R R R TR R R TR R B E E B C EHA78 EHA77 Type Marking Pin Configuration Package BCR8 WMs =B =E =C - - - BCR8S BCR8U WMs WMs =E =B =C 4=E 5=B 6=C =E =B =C 4=E 5=B 6=C BCR8W WMs =B =E =C - - - SOT SOT6 SC74 SOT -8-
BCR8... Maximum Ratings Parameter Symbol Value Unit Collector-emitter voltage V CEO 5 V Collector-base voltage V CBO 5 Input forward voltage V i(fwd) 4 Input reverse voltage V i(rev) Collector current I C ma Total power dissipation- P tot mw BCR8, T S C BCR8S, T S 5 C BCR8U, T S 8 C BCR8W, T S 4 C 5 5 5 Junction temperature T j 5 C Storage temperature T stg -65... 5 Thermal Resistance Parameter Symbol Value Unit Junction - soldering point ) R thjs K/W BCR8 BCR8S BCR8U BCR8W 4 4 5 For calculation of RthJA please refer to Application Note AN77 (Thermal Resistance Calculation) -8-
BCR8... Electrical Characteristics at T A = 5 C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. DC Characteristics Collector-emitter breakdown voltage I C = µa, I B = V (BR)CEO 5 - - V Collector-base breakdown voltage I C = µa, I E = Collector-base cutoff current V CB = 4 V, I E = Emitter-base cutoff current V EB = V, I C = DC current gain ) I C = 5 ma, V CE = 5 V Collector-emitter saturation voltage ) I C = ma, I B =.5 ma Input off voltage I C = µa, V CE = 5 V Input on voltage I C = ma, V CE =. V V (BR)CBO 5 - - I CBO - - na I EBO - -.75 ma h FE - - - V CEsat - -. V V i(off).8 -.8 V i(on) -.5 Input resistor R 7 kω Resistor ratio R /R.9. - AC Characteristics Transition frequency I C = ma, V CE = 5 V, f = MHz Collector-base capacitance V CB = V, f = MHz f T - - MHz C cb - - pf Pulse test: t < µs; D < % -8-
BCR8... DC current gain h FE = ƒ(i C ) V CE = 5 V (common emitter configuration) Collector-emitter saturation voltage V CEsat = ƒ(i C ), I C /I B = V -4 C -5 C 5 C 85 C 5 C VCEsat.8.7.6.5.4. -4 C -5 C 5 C 85 C 5 C.. -4 - - - Input on Voltage Vi (on) = ƒ(i C ) V CE =.V (common emitter configuration) - - A - I C Input off voltage V i(off) = ƒ(i C ) V CE = 5V (common emitter configuration) Vi(on) V -4 C -5 C 5 C 85 C 5 C Vi(off) V -4 C -5 C 5 C 85 C 5 C - -5-4 - - A - I C - -5-4 - - A - I C 4-8-
BCR8... Total power dissipation P tot = ƒ(t S ) BCR8 Total power dissipation P tot = ƒ(t S ) BCR8S mw mw 5 5 5 5 Ptot 75 Ptot 75 5 5 5 5 75 75 5 5 5 5 5 45 6 75 9 5 C 5 5 45 6 75 9 5 C 5 T S T S Total power dissipation P tot = ƒ(t S ) BCR8U Total power dissipation P tot = ƒ(t S ) BCR8W mw mw 5 5 5 5 Ptot 75 Ptot 75 5 5 5 5 75 75 5 5 5 5 5 45 6 75 9 5 C 5 5 45 6 75 9 5 C 5 T S T S 5-8-
BCR8... Permissible Pulse Load R thjs = ƒ( ) BCR8 Permissible Pulse Load P totmax /P totdc = ƒ( ) BCR8 RthJS K/W.5...5...5 D = Ptotmax / PtotDC - D =.5...5...5 - -6-5 -4 - - s Permissible Puls Load R thjs = ƒ ( ) BCR8S -6-5 -4 - - s Permissible Pulse Load P totmax /P totdc = ƒ( ) BCR8S RthJS K/W.5...5...5 D = Ptotmax / PtotDC - D =.5...5...5 - -6-5 -4 - - s -6-5 -4 - - s 6-8-
BCR8... Permissible Puls Load R thjs = ƒ ( ) BCR8U Permissible Pulse Load P totmax /P totdc = ƒ( ) BCR8U K/W RthJS D=.5...5...5 Ptotmax / PtotDC D=.5...5...5 - -6-5 -4 - - s Permissible Puls Load R thjs = ƒ ( ) BCR8W -6-5 -4 - - s Permissible Pulse Load P totmax /P totdc = ƒ( ) BCR8W RthJS K/W.5...5...5 D = Ptotmax / PtotDC - D =.5...5...5 - -6-5 -4 - - s -6-5 -4 - - s 7-8-
Package SC74 BCR8... Package Outline.9 ±. (.5) B (.5) +..5 -.6. MAX. Pin marking 6 5 4 +..5 -.5.95.9. M B 6x ±. ±..5.5 MAX.. M A MAX.. MAX..6 A ±. Foot Print.5.9.9.95 Marking Layout (Example) Small variations in positioning of Date code, Type code and Manufacture are possible. Manufacturer 5, June Date code (Year/Month) Pin marking Laser marking BCW66H Type code Standard Packing Reel ø8 mm =. Pieces/Reel Reel ø mm =. Pieces/Reel For symmetric types no defined Pin orientation in reel. 4..7 8 Pin marking.5.5 8-8-
Package SOT BCR8... Package Outline +. ).4 -.5.9 ±..9 B C.95.4 ±.5.5 MIN. MAX. ±.. MAX....8 MAX..8...5. ±. A.5 M BC. M A Foot Print ) Lead width can be.6 max. in dambar area.8.8..9..9 Marking Layout (Example) EH s Manufacturer 5, June Date code (YM) Pin BCW66 Type code Standard Packing Reel ø8 mm =. Pieces/Reel Reel ø mm =. Pieces/Reel 4.9. 8..65 Pin.5.5 9-8-
Package SOT BCR8... Package Outline ±.. +. -.5 x. M. MAX...9 ±. A.65.65.±.. MIN..5 +. -.5.5 ±.. M A Foot Print.6 Marking Layout (Example) Standard Packing Reel ø8 mm =. Pieces/Reel Reel ø mm =. Pieces/Reel 4.. 8.8.6.65.65 Manufacturer 5, June Date code (YM) Pin BCR8W Type code Pin.5. -8-
Package SOT6 BCR8... Package Outline ±. +.. -.5 6 5 4 6x. M. MAX...9 ±. A Pin marking.65.65.±.. MIN. +..5 -.5 Foot Print..9.6.7.65.65 Marking Layout (Example) Small variations in positioning of Date code, Type code and Manufacture are possible. Manufacturer 5, June Date code (Year/Month) Pin marking Laser marking BCR8S Type code Standard Packing Reel ø8 mm =. Pieces/Reel Reel ø mm =. Pieces/Reel For symmetric types no defined Pin orientation in reel. 4.. 8.5 ±.. M A Pin marking.5. -8-
BCR8... Edition 9--6 Published by Infineon Technologies AG 876 Munich, Germany 9 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (<www.infineon.com>). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. -8-