Standard Drive Pins for Concrete, Masonry and Steel Drive Pins designed for fastening to standard strength concrete, masonry and steel up to a maximum of 8mm. Part No Drive Pin Length (thickness to steel) (thickness to concrete) LDU25 25mm 12mm 2mm* 100 LDU32 32mm 20mm 7mm 100 LDU38 38mm 25mm 12mm 100 LDU42 42mm 30mm 20mm 100 LDU50 50mm 35mm 25mm 100 LDU57 57mm 45mm 35mm 100 LDU65 65mm 50mm 45mm 100 LDU75 75mm N/A 50mm 100 LDU90 90mm N/A 65mm 100 LDU99 100mm N/A 75mm 100 * Denotes steel fixture only Timber Formwork Pins for Concrete and Easy Pin Removal Drive Pins designed for fastening timber formwork to concrete. When the timber needs to be removed, the small head reduces the force required to strip the timber. The groove in the shank allows the pin to be removed easily with Ramset s drive pin breaker tool. Nominal Head Diameter 6.3mm PBT (Pin Breaker Tool) Part No Drive Pin Length Max Timber Thickness LDU60F 60mm 35mm 200 LDU75F 75mm 50mm 200 LDU99F 100mm 75mm 200 PBT (Pin Breaker Tool) 1 56 www.ramset.com.au 1300 780 063
Premium Drive Pins for Structural Steel Ramset s range of Premium Drive Pins has been designed for steel and hard concrete applications. The design of these drive pins allows them to penetrate hard materials with less power while the strengthened shank greatly reduces the possibility of column collapse. Nominal Shank Diameter 4.0 / 3.5mm Shear Strength 1240N/mm 2 Tensile Strength 2000N/mm 2 54-58HR C Part No Description (thickness to steel) (thickness to concrete) SC925 Thin Steel to Structural Steel Pin 12mm 2mm 100 SC930 Timber to Structural Steel Pin 18mm 5mm 100 SC940 Timber to Structural Steel Pin 30mm 15mm 100 SC950 Timber to Structural Steel Pin 35mm 25mm 100 SC950W Frame & Truss 16mm Washered Pin 35mm 25mm 100 SC960 Timber to Structural Steel Pin 45mm 35mm 100 SC960W Frame & Truss 16mm Washered Pin 45mm 35mm 100 SC970 Timber to Structural Steel Pin 55mm 45mm 100 Washered Drive Pins For Concrete, Masonry and Steel Washered Drive Pins designed to provide maximum clamping load while improving tool piston life. Wherever possible the use of washered drive pins is recommended to prevent failure of the material being fastened. LWU25K LWU25 Part No Washer Diameter Drive Pin Length (thickness to concrete) LWU25 22mm 25mm 2mm* 100 LWU32 22mm 32mm 7mm 100 LWU75 16mm 75mm 50mm 100 LWU25K 16mm 25mm 2mm* 100 * Denotes steel fixture only www.ramset.com.au 1300 780 063 57
Angle Bracket and Threaded Rod Hanger Assemblies Ramset s Angle Bracket and Threaded Rod Hanger Assemblies provide a secure fixing point for a wide variety of applications. LAU25 Corrosion Protection Nominal Head Diameter Nominal Shank Diameter Zinc Plated 7.8mm Various Part No Description Drive Pin Length LAU25 Standard Duty 25mm 100 LAU30H Heavy Duty 25mm 100 LZU30H Threaded Rod Hanger - M10 25mm 100 Drive Pins For Fixing Thin Steel To Steel Drive pin for fixing thin steel to structural steel sections. LZU30H Nominal Shank Diameter 4.0mm Part No Description Drive Pin Length SP12 Premium Steel Pin 13mm 100 Washered Drive Pins For Fixing Thin Steel To Steel Drive Pin designed for fixing thin steel to structural steel sections. This drive pin provides excellent clamping with a special 14mm diameter washer that interacts with a tapered section on the shank of the drive pin. Nominal Shank Diameter 4.0mm Shear Strength 1240N/mm 2 Tensile Strength 2000N/mm 2 54-58HR C Part No Description Washer Diameter Drive Pin Length SBR9 Decking Pin 14mm 20mm 100 * Suitable for use with Kingflor, Bondek, Condeck 58 www.ramset.com.au 1300 780 063
Soft Washered Membrane Fastener Soft Washered Drive Pin designed for fastening insulation up to 25mm, also designed for fastening foils and membranes such as drainage sheeting to concrete. The soft washer prevents any damage to the foil or membrane. (Plastic Washer) Shear Strength 1120N/mm 2 Tensile Strength 1800N/mm 2 50-55HR C Washer Diameter 35mm Part No Drive Pin Length Max Insulation Thickness CR950P 50mm 25mm 200 Drive Pin Accessories Drive Pin accessories for use with Ramset s standard LDU range of Standard Drive Pins for concrete, masonry and steel. The use of the discs provides maximum clamping loads while improving tool piston life. The use of the angle clip provides a fixing point for applications such as catenary wire. Corrosion Protection Low Zinc Electroplated (Min coating 6µm) RCD16F RCD22F RCA25F Part No Description RCA25F 25mm Angle Clip 100 RCD16F 16mm Disc 100 RCD22F 22mm Disc 100 www.ramset.com.au 1300 780 063 59
Misc. Drive Pins Collated Drive Pins to suit Hilti, DX 351, DX 460, DX A40, DX A41 Magazine Tools Collated Drive Pins designed for use with Hilti tools; DX460, DX351, DX-A40/41 fitted with a magazine. Corrosion Protection Zinc Mechanically Plated (Min coating 7µm) Nominal Head Diameter 8.2mm Part No Nominal Length Head Diameter (Thickness to steel) (Thickness to Concrete) RHC22 8.2mm 22mm 10mm 1mm 100 RHC27 8.2mm 27mm 14mm 3mm 100 RHC52 8.2mm 52mm 37mm 27mm 100 RHC62 8.2mm 62mm 47mm 42mm 100 RHC72 8.2mm 72mm 62mm 47mm 100 Drive Pins to suit Previous Ramset Tools - J20S, J20, 1/4 Barrel Drive Pins for use with previous Ramset direct acting powder actuated tools; J20, J20S fitted with a ¼ barrel. Nominal Head Diameter 6.3mm Part No Nominal Head Diameter Length HDB50 6.3mm 50mm 100 HDB64 6.3mm 64mm 100 HDB75 6.3mm 75mm 100 HDB95 6.3mm 95mm 100 60 www.ramset.com.au 1300 780 063