MOUNTING BRACKET 45 Part N 21.1411/0 - GD Zn, powder coated, grey Weight 0,426 kg - Connection of profiles - For subsequent fitting of profiles into existing constructions, displacable in direction of the groove - Fixing of supports - In case of mounting into vertical profiles, the use of square-nut M8 with position-fixing Part N 21.1351/2 is recommended ANGLE 19 GD Part N 21.1107/0 Weight 0,033 kg - Connection of profiles 19 and 32 - Subsequent fitting of profiles into existing constructions, displacable in direction of the groove - Fixing of supports - In case of mounting into vertical profiles, the use of square nut M8 with position-fixing Part N 21.1351/2 is recommended MINITEC PROFIL SYSTEM 75
ANGLE 25 GD Part N 21.1102/0 Weight 0,044 kg - General constructions,particularly useful for subsequent fitting of profiles into existing constructions - Strengthening of all profile constructions position-fixing Part N 21.1351/2 ANGLE 25 S Part N 21.1134/0 - Aluminium GD, powder coated - Locking device against torsion Weight 0,066 kg - Strengthening of profile connections - For mounting into vertical profile use square nut M8 with position-fixing Part N 21.1351/2 - Recommended locking torque: 20Nm 76 MINITEC PROFIL SYSTEM
ANGLE 30 GD Part N 21.1347/0 - Aluminium GD, powder coated Weight 0,065 kg - General constructions with profile 30 x 30 particulaly useful for subsequent fitting of profiles into existing construc.tions - Strengthening of constructions made from profile 30 x 30 - Recommended locking torque: 8 Nm - Suitable End cap MW 30 black Part N 22.1026/0 ANGLE 45 GD Part N 21.1133/0 Weight 0,072 kg - Strengthening of profile constructions position-fixing Part N 21.1351/2 - Hammer head screw Part N 21.1370/ can be used MINITEC PROFIL SYSTEM 77
ALUMINIUM PROFILES ANGLE 45 AK Part N 21.1709/0 - Locking device against rotation Al GD - End cap Weight 0,133 kg - Strengthening of profile constructions position-fixing Part Nr. 21.1351/2 - Hammer head screw Part Nr.21.1370/0 can be used ANGLE 45 R 90 Part N 21.1710/1 - Aluminium GD,nature - End cap 45 R 90, grey Weight 0,063 kg - Corner fastening of profiles 45 R 90 - Constructions for show cases, tables etc. - With screws M8 x 25 from the fastening kit in central bore of the profile - Clip into the end cap 78 MINITEC PROFIL SYSTEM
ANGLE 45 Part N 21.1109/1 - Aluminium GD,nature - End cap 45 /3, grey - On request also deliverable in black Weight 0,062 kg - Corner fastening of profiles 45 / 45 - Constructions for show cases, tables etc. - With screws M8 x 25 from the fastening kit in central bore of the profile - Clip into the end cap ANGLE 45 X 90 GD Part N 21.1135/0 - Aluminium, powder coated, grey Weight 0,216 kg - Fixing panel elements, table tops - For mounting into vertical profiles use Square nut M8 with position-fixing Part N 21.1351/2 MINITEC PROFIL SYSTEM 79
ANGLE 90 Part N 21.1000/0 - Locking device against rotation - End caps Weight 0,270 kg - For profiles 90 and 180 - Strengthening of all profile connections position fixing Part N 21.1351/2 - Hammer head screw can be used - See page 63 CONNECTING BAR Part N 21.1113/0 - Bar steel, zinc plated Weight 0,103 kg - Connection of different profiles - Subsequent fitting of profiles - No processing required 80 MINITEC PROFIL SYSTEM
FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS STRENGTHENING ELEMENT 45 Part N 21.1761/0 - Profile 45 x 45, ready for use - Both ends cut at 45 with counter-bores for fixing kit Weight 0,865 kg Length 360 mm - Reinforcement of constructions in halftimbered principle - Screw onto profile groove use the fixing kit STRENGTHENING ELEMENT 90 Part N 21.1762/0 - Profile 45 x 90, ready for use - Both ends cut at 45 with 4 counterbores for fixing kit Weight 1,416 kg Length 360 mm - Reinforcement of constructions in halftimbered principle - Screw onto profile groove use the fixing kit MINITEC PROFIL SYSTEM 137