PRODUCT DRAWING MESSRS : CUSTOMER'S PRODUCT NAME : DC/AC INVERTER UNIT CXA-0345 TDK PRODUCT NAME : DATE :

Similar documents
Product Drawing TENTATIVE

MESSRS : CUSTOMER'S PRODUCT NAME: DC-AC INVERTER UNIT CXA-0379 TDK PRODUCT NAME:

All the companies. Product Drawing

Discontinued AN6262N, AN6263N. (planed maintenance type, maintenance type, planed discontinued typed, discontinued type)

MESSRS : PRODUCT DRAWING CUSTOMER'S PRODUCT NAME: DC-AC INVERTER UNIT CXA-0492 TDK PRODUCT NAME:

Carbon Composition Resistors

Product Drawing TENTATIVE

All the companies. Product Drawing

Safety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501.

Series AE W PFC INDUSTRIAL POWER SUPPLY

MESSRS : Product Drawing. TDK-Lambda Corporation. All the companies CUSTOMER'S PRODUCT NAME: DC/DC CONVERTER UNIT ALD PJ111 TDK PRODUCT NAME:

Piezo Ceramics DC-AC Inverter. Specification

Piezo Ceramics DC-AC Inverter. Specification

APT60GT60JR SOT-227 G E

Product Drawing TENTATIVE

MESSRS : CUSTOMER'S PRODUCT NAME: DC-AC INVERTER UNIT CXA-0420 TDK PRODUCT NAME:

CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.

mj P D Watts T J,T STG T L CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.

NP10 DIGITAL MULTIMETER Functions and features of the multimeter:

SGM4582 High Voltage, CMOS Analog Multiplexer

Extended InGaAs Photodiodes IG26-Series

Device installation. AFR 1xx - Feature Description of the Smart Load. AFR1xx 145 % 200 %

Regular InGaAs Photodiodes IG17-Series

Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution

JUMO Wtrans B Programmable Head Transmitter with Radio Transmission

Array chip resistors size ARC241/ARC242 ARV241/ARV242

Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution programmable (interpolated system)

ZTR250 ZTR500 FIXED 2.5 AND 5 VOLT 3-TERMINAL VOLTAGE REFERENCES ISSUE 4 - MARCH 1998 DEVICE DESCRIPTION FEATURES APPLICATIONS SCHEMATIC DIAGRAM

Incremental encoders Solid shaft with square flange pulses per revolution

ABB STOTZ-KONTAKT. ABB i-bus EIB Current Module SM/S Intelligent Installation Systems. User Manual SM/S In = 16 A AC Un = 230 V AC

Low-Noise, Precision, +2.5V/+4.096V/+5V Voltage Reference

IT (AV) A VDRM V JEDEC : TO-92. Conditions A IT (AV) Commercial frequency, sine half wave, 180 conduction, Ta=30 C A ITSM

TDK Corporation Power Systems Business Group

Synchronous Machine Parameter Measurement

M81711FP MITSUBISHI SEMICONDUCTORS <LVIC> GENERAL PURPOSE DRIVER

388 SQUARE BASE TIME DELAY RELAYS

Products no longer available

FTU263. Ripple Control Receiver. Technical Data. Load Management Ripple Control

Pilot Operated Proportional DC Valve Series D*1FB. Pilot Operated Proportional DC Valve Series D*1FB. D*1FBR and D*1FBZ

Pilot Operated Servo Proportional DC Valve Series D*1FP

SPECIFICATION OUTLINE

Synchronous Machine Parameter Measurement

Pilot Operated Servo Proportional DC Valve Series D*1FP

Ultra Low Cost ACCELEROMETER

Ultra Low Cost ACCELEROMETER

SPECIFICATION OUTLINE

APPLICATION AC100V~200V three-phase inverter drive for small power motor control. (2.2) 21.4 ±0.5 (10) (11) (10) (4.65) (2.9) 34.9 ± ±0.5 (1.

SPECIFICATION OUTLINE

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

PS21869-P/AP PS21869-P/AP. APPLICATION AC100V~200V inverter drive for small power motor control. PS21869

IT (AV) A VDRM...400V/600V JEDEC : TO-92. Conditions A IT (AV) Commercial frequency, sine half wave, 180 conduction, Ta=47 C A ITSM

MC100LVEL VНECL Dual Differential 2:1 Multiplexer

Parallel Actuator Cut-off Control PAS 3 a

PS21265-P/AP TRANSFER-MOLD TYPE TYPE INSULATED TYPE TYPE

Pilot Operated Servo Proportional DC Valve Series D*1FP

5A, 100V - 150V Trench Schottky Rectifiers

DUAL DIMMING, EXTENDED TEMPERATURE CCFL INVERTER MODULE. Obsolete. utilizing standard lamp current

2N6071A/B Series. Sensitive Gate Triacs. Silicon Bidirectional Thyristors TRIACS 4.0 A RMS, V

FAST CMOS OCTAL BIDIRECTIONAL TRANSCEIVER

UVEPROM SMJ27C K UVEPROM UV Erasable Programmable Read-Only Memory. PIN ASSIGNMENT (Top View) AVAILABLE AS MILITARY SPECIFICATIONS

SPECIFICATION. Preliminary MT5F Fuji Electric Systems Co.,Ltd. : Mar This specification's contents may change without previous notice.

How to remove BRNS/BRFS series from a PWB

Lab 8. Speed Control of a D.C. motor. The Motor Drive

MC100LVEL56 3.3VНECL Dual Differential 2:1 Multiplexer Description The MC100LVEL56 is a dual, fully differential 2:1 multiplexer. The differential dat

Power rating at 80 C watts R0005 ohms R0006 to R01. R001 to R01 Power. to R015. (mω) 1 0.2, 0.25, 0.3, 0.

CVM-B100 CVM-B150. Power analyzers for panel

& Y Connected resistors, Light emitting diode.

15A, 45V - 200V Dual Common Cathode Schottky Rectifiers

AD5220* PRODUCT PAGE QUICK LINKS Last Content Update: 02/23/2017

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Resolver Interface Card "OPC-G1. RES" Product Specifications

1, 1.5, 2, 2.5, , 0.75, 1, 1.5, , 3, , 4.5, 5, 5.5, , 4.5, 0.5, 5, , , 6.

In mm CW PK LT-AX18A EB01 LT-AX18B EB02. Eleading Technologies Ltd.

2N6071A/B Series. Silicon Bidirectional Thyristors TRIACS 4.0 A RMS, V

PanelMatch StayLit PRODUCT HIGHLIGHT. PWM Signal. Potentiometer. Microsemi. Lamp current 5 or 6mA per Lamp PACKAGE ORDER INFO

Experiment 3: The research of Thevenin theorem

QM300HA-2H HIGH POWER SWITCHING USE

PanelMatch PRODUCT HIGHLIGHT INPUT. PWM Signal. Lamp Current 10 to 14mA in Steps PACKAGE ORDER INFO

LOW NOISE LOW DROPOUT VOLTAGE REGULATOR

Reversible and Proportional Electric Actuators

PS21963-ET/-AET/-CET/-ETW TRANSFER-MOLD TYPE INSULATED TYPE

G9SA. Safety Relay Unit. The G9SA Series Offers a Complete Line-up of Compact Units. Model Number Structure

L9307 L9309 DUAL HIGH CURRENT LOW SIDE DRIVER

EY-AM 300: novanet BACnet application master, modunet300

M63850P/FP. PRELIMINARY Notice: This is not a final specification. MITSUBISHI SEMICONDUCTOR <TRANSISTOR ARRAY> 4-UNIT 1.5A DMOS ARRAY WITH CLAMP DIODE

+2.5V/+4.096V/+5V Voltage References

3/8" Square Multi-Turn Cermet Trimmer

Exercise 1-1. The Sine Wave EXERCISE OBJECTIVE DISCUSSION OUTLINE. Relationship between a rotating phasor and a sine wave DISCUSSION

BIDIRECTIONAL TRANSCEIVER

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

BCR16A, BCR16B, BCR16C, BCR16E

418 MHZ TRANSMITTER and RECEIVER

QM15HA-H MEDIUM POWER SWITCHING USE

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Connection Technology

! MINIMAL DIMENSIONS! MINIMAL MAINTENANCE! RELIABILITY! MARKET ORIENTATION

500mA LED PROTECTOR APPLICATIONS

Data Sheet. Customer: Ultra Low Ohm (Metal Strip) Chip Resistor -LR Series Size: 1206/2010/2512

MC14541B. Programmable Timer

SGM7SZ04 Small Logic Inverter

Transcription:

No. MESSRS : CUSTOMER'S PRODUCT NME : TDK PRODUCT NME : DC/C INERTER UNIT CX-0345 DTE : TDK Corportion Corporte Hedqurters 3-,Nihonshi -chome,chuo-ku, Tokyo 03, JPN Telephone : 03-3278-5 2-5-7,Higshi-Ohwd,Ichik w-shi, Chi,272-8558 JPN Telephone : 047-378-967 Fx : 047-378-9673 R PREPRED BY PPROED BY UTHORIZED BY ug.3.'04 Y.Miyok ug.3.'04 Y.Miyok ug.3.'04 Y.Hnus DWG.No. CTR-094-D

The specifictions my e chnged without ny notice. When plcing orders, plese confirm "Specifictions" or Product Drwing" through TDK sl es or distriutors. TDK is now under developing new DC to C Inverter CX-0345 which is designed for utomotive LCD use. The rchitecture includes utomtic rightness control with NTC themistor in cluded in the LCD for wide operte temperture s -30 to 85 deg-c. The CX-0345 will distriute 6.5m rms. under the norml conditio n, nd 9m rms etween -30 to 50 deg-c. (Reference LCD is LQ065T9DR5 mde y Shrp) complete dimming interfce with minimum nd mximum setti ngs provide pproximtely 0% to 00% flexiility. Wide input voltge is ville from 8 to 6 nd protection circu it will cover reverse input or serge. [] Outline -. Outline TOP IEW (4) 20±0.5 (6.0) 07.7±0.3 Lel (Exmlpe) TDK prt No, Dte code, Country of origin CN3 23.7±0.3 (2) CN CX-0345 2Y27 MDE IN JPN CN2 30±0.5 CUTION HIGH OLTGE SIDE IEW 3.0±0.3 4-φ2.5 () (3) 8.5 Mx BOTTOM IEW Unit:mm Symols Product nme Quntity mteril Notes () PCB Glss epoxy (FR-4) Composite (CEM-3) UL94-0 t=.0 (2) CN 5326-07 MOLEX (3) CN2 SM02(8.0)B-BHS- JST (4) CN3 5326-027 MOLEX CTR-094-D TSB-08-0-05(00) form-6(4)

-2. Connector Configurtion Input side CN Pin No. Symols Rtings Function Notes CN- IN CN-2 IN 8 to 6 Power source CN-3 GND CN-4 GND 0 Ground CN-5 RMT 0/5 Remote function High ctive CN-6 BR-INT 0 to 3 Dimming signl input terminl when the internl oscilltor is used CN-7 BR-EXT TBD Dimming signl input terminl for externl contorol this function is not ville now. CN-8 BOOST 0/5 Output current chnge signl High : Output current is 8.5 mrms (TYP.) input terminl Low : Output current is (6.5) mrms CN-9 FRQ-EXT 0/5 Externl signl input terminl for If you do not use, ON-DUTY 0 % synchronized drive frequency. this PIN(CN-9) plese mke open. CN-0 FRQ-SW 0/5 Drive frequency chnge signl High : Frequency is 75kHz input terminl. Low : Frequency is 60kHz s defult Output side CN2 Pin No. Symols Rtings CN2- HIGH 700rms 9.0mrms CN2-2 N.C. - CN2-3 LOW (0.6) Input side CN3 Pin No. Symols CN3- TH CN3-2 TH2 Rtings GND (5) Note. For circuit connection, plese prefer to test circuit digrm [4]. Note2. Plese use minimum of 2mm clernce (ll directions) etween inverter high voltge re nd ny conductors. Plese refer to mechnicl drwing for mrking of high voltge re. Note3. Open voltge (strike voltge) is mesured cross the trnsformer secondry winding t no lod s the reding t the output connector would e less thn the ctul vlue. Note4. If the strt up voltge flls elow Cold Cthode Tue strike voltge, the CCFL will not light up esily specilly t lower mient temperture. Plese review mounting instruction to void ny n orml opertion due to coupling/lekge cpcitnce of inverter high voltge re to ny surrounding conductor. Note5. Plese check your lmp chrcteristic for minimum opertionl current nd set the limit point in your design to void flickering nd/or norml opertion. Note6. For proper opertion of circuit protection (fuse or IC),Plese use min imum of 3 cpcity for input power supply. Note7. Since these technicl dt re development trgets, we cnnot gurntee the chrcteristic of product. Note8. Specifictions sometimes ecome chnges y this smpl e for the development goods. CTR-094-D 2 TSB-08-0-05(00) form-6(4)

[2] solute mximum rtings Items Symols Specifiction Unit Notes Input oltge Output Power IN 0~6 RMT 0~5 BR-INT 0~3 BR-EXT 0~5 BOOST BR-EXT FRQ-EXT 0~5 FRQ-SW Po 8 W Operting Temp. rnge T -30~85 C Mximum wet ll temperture is 38 C. No dew. Storge Temp. rnge Ts -40~85 C Mximum wet ll temperture is 38 C. No dew. [3] Electricl specifictions Items Symols in [] Conditions T [ C] RL [k Ω ] rmt [] r [] Specifiction MIN. TYP. MX. Unit Output Current (See Note 9.) Input Current Iout (MX) Iout (MIN) Iin 8.0 to 6.0 2±0.05-30 to +50 50 to +85 25 00±2 5±0.05 3.0 0 7.0-8.0 9.0 5.5 6.5 (7.5) (0.5).0 (2.0) 600 800 mrms mdc Frequency F F2(Duty) 3.0 50 60 70 20 50 80 khz Hz Open Circuit oltge open 8±0.05-30 to +85.8 2.0 (2.2) krms Note9. ville re (LQ065T9DR5) [%] 00 80 9.0 3.5-30 25 50 85 Temp[ C ] CTR-094-D 3 TSB-08-0-05(00) form-6(4)

[4] Block Circuit themistor LCD module CN DC-C Inverter CN2 IN HIGH GND RMT BR_INT LOW BR_EXT BOOST FRQ_EXT FRQ_SW mp CN3 themistor [5] Reliility test Following test items re ssured. Items Low Temp. (Non opertionl) Low Temp. (opertionl) High Temp. (Non opertionl) High Temp. (opertionl) Het shock Humidity (Non opertionl) Conditions -30 C 240h -30 C 240h Lod cond.:typ 85 C 240h 85 C 240h Lod cond.:typ -30 C 85 C 30min.Ech 200 Cycles 50 C 90~95%RH 240h Judgement Electricl nd pperrnce should e in the spec. irtion 0~57Hz mplitude0.75mm 58~500Hz G Sweep:min 60min ech xis X,Y,Z Shock 00G ms Hrf-sine pulse time ech xis ±X,Y,Z Open/Short Test Ech prts : Open/Short(FILURE) IN=2 Power supply cpcity : 4.2 MIN. Smoke or fire should e within 60 seconds. Smoke should e s little s smoke of cigrettes. CTR-094-D 4 TSB-08-0-05(00) form-6(4)

[6] Terminl connection digrm in 8 6 Iin CN-.2 in CN-3.4 GND Q 2, T 8,9 3 C3 4, 5 6 C5 CN2- CN2-2 RL Iout RMT 0/5 SW CN-5 RMT BR-INT 0/3 CN-6 BR-INT BOOST 0/5 SW2 CN-8 BOOST FRQ-EXT 0/5 *Freq =40 to 80kHz Duty = 0% SW3 CN-9 FRQ-EXT FRQ-SW 0/5 SW4 CN-0 FRQ-SW * If you will chnge driving frequency, Plese verify temperturesof trnsformer,mos-fets,etc SW Opertion F F 000: PROBE open Work Doesn't work OPEN Doesn't work RMT : Internl cuicut SW2 OPEN SW3 Opertion Boost Mode Norml Mode Low Mode Boost Mode s output current is 8.5 [m rms]. Norml Mode s output current is 6.5 [ mrms]. SW4 OPEN Opertion Synchronized drive to externl signl synchronous drive Opertion High Freq -drive Norml Drive Norml Drive High Freq -drive s drive frequency is 75 [khz]. Norml Drive s drive frequency is norml (60 [khz]). CN-,2 in CN-5 rmt Test equipments F 000: 0kΩ 0.uF 0kΩ 0kΩ Digitl Multi Meter DC Current Meter True RMS. Meter Frequency Counter High Frequency Current Meter High oltge Proe CTR-094-D NPN 0kΩ 0kΩ PNP TSB-08-0-05(00) form-6(4) IC 5