DI T ID S DT ST This DI gas analyzer is used for measuring CO, CO, SO and C 4 and features a high accuracy, multiple functions and easy operation through use of a microprocessor. It is housed in a 19 inch rack case suitable for mounting on a panel or a table-top. The analyzer provides a performance superior to the conventional double-beam system, is easy to maintain, and offers an excellent long-term stability. It is thus optimum for continuous measurement in the combustion control of various industrial furnaces, in research on garden-plants, and so on. TS 1. The use of a microprocessor provides high accuracy, multiple functions and easy operation. ero and span calibration is accurate and easy just by pressing the calibrating keys. self-diagnosis function is included. n automatic calibrating function can be provided as an option. ange can be changed over by a external signal as an option.. n improved optical system provides long term stability, and there is a minimum of drift caused by contamination of the measuring cell, so the long-term stability is excellent. 3. dopting a serial dual-layer type of transmission detector minimizes remarkable the interface from other gas components. 4. asy maintenance. The single-beam photometric system uses a sample cell only and eliminates the necessity of delicate adjustment for optical balance. The instrument is designed as a unit of simple construction featuring easy maintenance and checks. SCIICTIOS easurable gas components: Single-component CO CO, SO, C 4 : Dual-component CO /CO: andfill garbage application CO : C 4 : 0 to 80% easuring range: efer to measurable range combination table (page 5). easuring system: on-dispersion infrared-ray absorption method, deviation method, single light source single beam Output signal: Output 1; 0 to 1V DC Output ; 4 to 0m DC (optional allowable load resistance 550Ω or less). epeatability: 1st range (low range) Within ± 0.5% of full scale nd range (high range) Within ± 1% of full scale inearity: ± % of full scale ero drift: Within ± % of full scale/week Span drift: Within ± % of full scale/week esponse time: Within 15 seconds max. (for 90% response) depending on cell length ower supply: 100V, 115V, 0V or 40V ±10% C, 50/ 60z ower consumption: 3V max. DS3-111c Date Oct. 10, 1998
mbient temperature: 5 to +45 C mbient humidity: 90% or less nclosure: Steel casing, for indoor use Storage condition: Temperature; 0 to +60 C umidity; 100% max. (free from condensation) Outer dimensions ( x W x D): ack mounting type; 133 x 483 x 435 mm anel flush mounting type; 133 x 443 x 435 mm Table-top type; ass weight: pprox. 1g inish color: unsell.58.4/1. Display: 4 digit D for concentration display 4 digit D for sub-display Output hold: Output value before manual or automatic calibration is hold. Whether or not to effect hold function can be selected. Sample gas condition: Temperature; 0 to 50 C Dust; less than 0.3 µm ressure; less than 9.8 ka Standard adjustment gas: Dry alance Warm up time: pprox. hours aterial of gas-ing parts: Sample cell, SS304, neoprene rubber Infrared-ray transmitting window; Ca or sapphire Internal tubing; Toaron tube as inlet/outlet, purge gas inlet size: c1/4 (T1/4 internal thread) or T1/4 internal thread easured gas flow rate: 1 ± 0.5 liter/minutes urge gas flow rate: pprox. 1 liter/minute Scope of delivery:nalyzer, power fuse, manual, mounting bracket in the case of panel mounting type ounting method: ounted on 19 inch rack, or on panel, or on table-top approx. 50mm 90 Support Optional specifications emote hold: nalog (DC0-1V, 4-0m) is held via external signal. Input signal: 5V DC emote range changeover: ange is changeable via external signal. ange changeover input signal: 5V DC ange identification signal : Contact ; 1 a Contact capacity; 50V C, (resistive load) utomatic calibration: ero and span are automatically calibrated at the preset cycle. Calibration gas is supplied sequentially by driving an electromagnetic value installed outside. Calibration channel: p to components can be calibrated simultaneously. ero calibration point: ixed at 0% Span calibration point: 5 full scale Calibration start: Via built-in timer or remote start signal Output hold at calibration: ossible Calibration gas flow mode: (1) ero gas () ero gas span gas 1 (3) ero gas span gas (4) ero gas span gas 1 span gas Calibration gas flow time: Settable from 100 to 599 sec. Calibration cycle: 1 to 199 hours (in 1-hour step) Calibration failure alarm: rovided when fault occurs during auto calibration. Contact : During calibration; 1 a (.O), capacity 50V C, (resistive load) Calibration failure; 1 a (.O), capacity 50V C, (resistive load) lectromagnetic valve drive; 1 a (.O), capacity 50V C, (resistive load) emote start: emote start signal; voltage input 5V DC emark: 0% or more of the analyzer weight should be supported at the bottom of the case. (In case of mounting panel or 19 inch rack, provide a support at the rear of casing.) Installation conditions: Install the analyzer at a place not exposed to direct sunlight or the radiation from a high temperature object. void vibration, and select a clean place free of corrosive and/or combustible gases. If installing outdoors, provide a suitable casing or cover to protect the analyzer from wind, rain, etc.
COD SOS (1) Single-component analyzer 1 3 4 5 6 8 9 1011113 14 15 16 1 18 1 - - - Description 1 o. of measurable components Single component D easurable component SO CO CO C4 Q W X easuring range (1st range) (ote 1) 0 to 500 ppm 0 to 500 ppm 0 to 3% 0 to 40% 0 to 0% 0 1 3 4 5 6 8 9 ower supply, iping connection 100V C 50z c 1/4 100V C 60z c 1/4 115V C 60z c 1/4 0V C 50z c 1/4 100V C 50z T 1/4 100V C 60z T 1/4 115V C 60z T 1/4 0V C 50z T 1/4 40V C 50z T 1/4 40V C 50z c 1/4 C Structure Table top type 19 inch rack mounting type anel mounting type Output signal (Output 1/) (otes, 3) 0 to 1V DC /4 to 0m DC Optional function (1) one With auto-calibration Optional function () one With remote range, range identification and remote hold easuring range (nd range) (ote 1) one 0 to 500 ppm djustment gas Standard for carburizing furnace (ote 4) aint uji standard on standard specifications on standard otes : (1) efer to measurable range combined table () Output signal are provided simultaneously (3) 0 to 100mV, 0 to 10mV DC is available on request (4) To be adviced components of sample gas 3
() Dual-component analyzer 1 3 4 5 6 8 9 1011113 14 15161 18 - - - V 0 1 3 4 5 6 8 9 C Description o. of measurable components Dual component easurable component CO/CO easuring range (1st comp. 1st range) ote (5, 6) easuring range (nd comp. 1st range) ote (5, 6) 0 to 500 ppm 0 to 5% ower supply, iping connection 100V C 50z c 1/4 100V C 60z c 1/4 115V C 60z c 1/4 0V C 50z c 1/4 100V C 50z T 1/4 100V C 60z T 1/4 115V C 60z T 1/4 0V C 50z T 1/4 40V C 50z T 1/4 40V C 50z c 1/4 Structure Table top type 19 inch rack mounting type anel mounting type Output signal (Output 1/) (otes, 3) 0 to 1V/DC 4 to 0m DC Optional function (1) one With auto-calibration Optional function () one With remote range, range identification and remote hold 1 3 4 5 6 8 9 1011113 14 15 16 1 18 - - - The product conforms to the requirements of the lectromagnetic compatibility Directive 89/336/C as detailed within the technical construction file number T3456. The applicable standards used to demonstrate compliance are : 50081-1 : 1991 CSS Conducted and adiated emissions 5008-1 : 199 V Description easuring range (1st comp. nd range) one easuring range (nd comp. nd range) one 0 to 5% djustment gas Standard for carburizing furnace aint uji standard on standard specifications on standard adiated immunity, SD and T ote (5) efer to measurable range combination table (6) 1st comp. is CO, nd comp. is CO. 4
easurable range combination table (1) Single-component (CO CO C 4 ) nd range 1st range Q W X 0 to 500 ppm 0 to 500 ppm 0 to 3% 0 to 40% 0 to 0% :CO :CO : C 4 :SO : Impossible * lso single range is possible 0 to 500 ppm () Dual-components (CO /CO) nd component 1st range 1st component 1st range CO 0 to 500ppm 0 to 1000ppm 0 to 000ppm 0 to 5000ppm CO V 0 to 5% 1st component is CO, nd component is CO. : Dual-components are possible oth components are able to have nd range. nd range is x or x.5 of 1st range, choose the Code symbols * : Dual-components are possible ut only one component, CO or CO, is able to have nd range. nd range is x or x.5 of 1st range, choose the Code Symbols. : Impossible. * DT ICI DI Infrared ray light source as inlet as outlet Detector Synchronuous motor easuring cell ass flow sensor otary sector DC amplifier ectifier C amplifier C /D Input emote range emote hold Contact D/ Output 0 to 1V, 4 to 0m DC Operating panel ange identification signal Output during calibration Display Operation key 5
OTI DI (nit:mm) 483 465 443 30 380 5 133 5. 14.5 ower switch Operating panel (ack mounting plate) anel cutout dimensions (in case of panel mounting) <ront View> xternal connection terminal (1st component) <Side View> Sample gas inlet (c 1/4 or T 1/4) Sample gas outlet (c 1/4 or T 1/4) urge gas inlet (c 1/4 or T 1/4) 16 + 0 436 + 0 (nd component) (TO C) 435 ower terminals COCTIO DI Output 1: 0 to 1V DC Output : 4 to 0m DC ault <ear View> 1st component nd component TO C ange nder (option) Output 1: ange 1 identification 1 calibration 0 to 1V DC identification 1 8 8 8 3 9 (option) Output : 3 9 (option) uto 3 9 4 to 0m DC calibration 4 10 4 10 failure 4 10 emote hold 5 11 input(option) 5 11 5 11 6 1 emote range 6 1 emote range emote 6 1 input(option) input(option) start input ero gas Span gas 1 Span gas SCO O DIV 1 x gas analyzer main unit 1 x test report 1 x instruction manual x ower fuse 4 x panel mounting bracket TD DVICS as sampling device ccommodating locker Standard gas (for calibration) eceiving instrument ODI IOTIO 1. nalyzer type.. aximum, normal and minimum concentrations of sample gas as well as type and content (percent by volume) of concomitant gas. 3. Temperatures (maximum, normal and minimum), pressure and humidity of sample gas. 4. Dust conditions (mg/m 3 or particle size, characteristics, etc.) and environmental conditions. 5. Other items ead office 11- Osaki 1-chome, Shinagawa-ku, Tokyo, 141-003 apan hone: 81-3-5435-111 http://www.fujielectric.co.jp/eng/sg/iso/welcome.htm Sales Div. International Sales Dept. o.1, uji-machi, ino-city, Tokyo, 191-850 apan hone: 81-4-585-601, 60 ax: 81-4-585-618, 6189 Information in this catalog is subject to change without notice. rinted in apan