High Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67G environment resistance
|
|
- Geoffrey Dennis
- 6 years ago
- Views:
Transcription
1 1 High Accuracy Eddy Current Type Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1 guide... P.11~ General precautions... P.19 PHOTO PHOTO MEASURE panasonic.net/id/pidsx/global Resolution. % F.S., Linearity ±. % F.S., IPG environment resistance Accurate measurement of minute displacements Minute displacement of metallic objects can be accurately measured with a resolution of. % F.S. S (For 1 mm.39 in sensing type) Resolution:. µm.1 mil ENVIRONAL RESISTANCE The protected as per IPG With IPG environment resistance, various measurements are possible under many different conditions. FUNCTIONS Equipped with a zero-adjustment function By pressing the zero-adjustment button, you can reset the output voltage to V with one touch. (Resets the current output to ma) This function comes in handy when performing tolerance diagnosis of a masterwork to be used as the standard. Easy adjustment for product changes. Remote operation is also possible by way of an external input. MOUNTING s can be mounted in narrow spaces If mounting standard types and different types parallel to each other, they use up one-third the space needed for mounting compared to the same models. In addition, the 1F type can be mounted close together and the s can be set in a narrow range for distortion and other difficult measurements. Linearity ±. % F.S. is accurately output since it incorporates a high accuracy linearity correction circuit. BASIC PERFORMANCE Stable temperature characteristics These s boast a mm.9 in sensing range enabling.3 % F.S./ C. (Excluding the different type). S (For mm.9 in sensing type) Temperature characteristics:. µm/ C. mil/ C OPERABILITY Fine adjustment of output Fine adjustment according to the sensing conditions is possible with shift and span functions. Shift adjustment + V V V Shift adjustment range: ±. V. V Zero-adjustment settable range V Maximum distance Shift adjustment range: ±. V Span adjustment 3. V V Maximum distance
2 High Accuracy Eddy Current Type Sensor SERIES 1 APPLICATIONS Measuring gap between rollers Fine gap measurement is possible to control the gap between rollers. ORDER GUIDE Measuring parallelism of chassis Even a slight tilt can be reliably detected. For 1 mm.39 in sensing For mm.9 in sensing For mm.19 in sensing Type Non-threaded type Non-threaded type Threaded type Threaded type s ø. ø.13 ø ø.31 M1 M1 Appearance (mm in) Sensing range Set model No. Output to 1 mm to.39 in to mm to.9 in to mm to.9 in to mm to.19 in S SI S SI 1M 1MI 1ML 1MLI Analog voltage Output voltage: to V Analog current Output current: to ma For 3 mm.11 in sensing Front sensing type to 3 mm to.11 in 1F 1FI Please ensure to order the and the amplifier as a set. The set is calibrated and delivered. Type Model No. Description mounting bracket MS-SS MS-SS Mounting bracket for S(I) Mounting bracket for S(I) mounting bracket MS-SS MS-SS It enables easy fixing of the.
3 19 High Accuracy Eddy Current Type Sensor SERIES SPECIFICATIONS Type For 1 mm.39 in sensing For mm.9 in sensing For mm.19 in sensing For 3 mm.11 in sensing Non-threaded type Non-threaded type Threaded type Threaded type Front sensing type Item Set model No. S SI S SI 1M 1MI 1ML 1MLI 1F 1FI Sensing range to 1 mm to.39 in to mm to.9 in to mm to.19 in to 3 mm to.11 in Standard sensing object Supply voltage Current consumption Analog outputs Analog voltage output Analog current output Response Resolution Linearity Alarm output sheet t 1 mm t.39 in sheet 1 1 t 1 mm.. t.39 in Analog voltage Output voltage: to V Output impedance: 1 Ω approx. V DC ±1 % Ripple P-P 1 % 1 ma 1. khz ( 3 db). % F.S. Within ±. % F.S. sheet 3 3 t 1 mm t.39 in Analog current Output current: to ma Load resistance: to 3 Ω NPN open-collector transistor Maximum sink current: 1 ma Applied voltage: 3 V DC (between alarm output and V) Residual voltage: 1. V (at 1 ma sink current). V (at 1 ma sink current) Output operation Turns ON when the connection is improper or the cable is disconnected Short-circuit protection External zero-adjustment input Zero-adjustment setting method Power indicator Over indicator Alarm indicator Adjustments Temperature characteristics (Note ). μm/ C. mil/ C Input condition: Non-voltage contact or NPN open-collector transistor input Signal condition: Low... to 1 V (duration 3 ms ) High... to 3 V, or open Operation: Low... External zero-adjustment setting High... External zero-adjustment ineffective Push button setting / External input setting Green LED (lights up when the power is ON) Orange LED (lights up when sensing range is exceeded) Yellow LED (lights up when the alarm output is ON) 1 Shift adjustment (by push-buttons), Span adjustment (by 1-turn adjuster). μm/ C. mil/ C 1 μm/ C.39 mil/ C. μm/ C. mil/ C 1 μm/ C.39 mil/ C 1. μm/ C.9 mil/ C. μm/ C.9 mil/ C sheet 1 1 t 1 mm t.39 in.9 μm/ C.3 mil/ C 1. μm/ C.9 mil/ C. μm/ C.1 mil/ C. μm/ C.31 mil/ C. μm/ C.9 mil/ C 1. μm/ C. mil/ C Protection IP (IEC), IPG Ambient 1 to + C +1 to +131 F, Storage: to + C to +1 F temperature to + C +3 to +1 F (No dew condensation allowed), Storage: to + C +3 to +1 F Ambient humidity 3 to % RH, Storage: 3 to % RH Voltage withstandability V AC for one min. between all supply terminals connected together and enclosure Insulation resistance MΩ,, with V DC megger between all supply terminals connected together and enclosure Vibration resistance 1 to Hz, 1. mm.9 in double amplitude in X, Y and Z directions for two hours each 1 to 1 Hz,. mm.3 in double amplitude in X, Y and Z directions for two hours each Shock resistance m/s acceleration ( G approx.) in X, Y and Z directions five times each 1 m/s acceleration (1 G approx.) in X, Y and Z directions five times each Enclosure: (SUS33) Enclosure: (SUS33) Enclosure: (Nickel plated) Enclosure: (SUS33) Material Sensing part: Polyalylate Sensing part: ABS Sensing part: Nylon Sensing part: ABS Enclosure: ABS Cable attached high coaxial cable, 3 m 9.3 ft long Cable length (Note 3) Total length up to 1 m 3. ft is possible with.3mm,, cable. Net Weight g approx. g approx. (Note ) g approx. (Note ) g approx. g approx. Accessories Adjusting screwdriver: 1 pc. Nut: pcs., Toothed lock washer: 1 pc. Adjusting screwdriver: 1 pc. pcs. each of M3 countersunk head screws, spring washers, plain washers and M3 nuts Adjusting screwdriver: 1 pc. Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of + C + F. ) These values are for a range which is to % of the maximum sensing distance. 3) Take care that the output voltage is reduced due to the resistance of the wiring cable. ) The given weight of the threaded type is the value including the weight of the nuts and the toothed lock washer.
4 High Accuracy Eddy Current Type Sensor SERIES 19 I/O CIRCUIT AND WIRING DIAGRAMS I/O circuit diagram Wiring diagram Notes: 1) In case of using the analog voltage output, connect a device having a high input impedance. Also, take care that the output voltage is reduced due to the resistance of the wiring cable. ) The alarm output is not incorporated with a short-circuit protection circuit. Do not connect it directly to a power supply or a capacitive load. Symbols... D1: Input protection diode D: Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : NPN output transistor SENSING CHARACTERISTICS (TYPICAL) *1 *1 External zero-adjustment input Analog voltage output ( to V) Analog current output ( to ma) P OWER O VER ALARM MADE IN JAPAN Supply voltage V DC ±1 % S ANALOG Load Alarm output Note: After the wiring, make sure to fit the terminal covers. The terminal cover having a concave depression at the top should be fitted on the side having terminal Nos. 1 to. Non-voltage contact or NPN open-collector transistor or Terminal No. Low ( to 1 V) (duration 3 ms ): External zero-adjustment setting High ( to 3 V, or open): External zero-adjustment ineffective Correlation between material and output voltage / current The series is made for all types of standard iron sensing objects. The graph below describes the output discrepancies that occur when detecting different types of metals. S(I) for connection Main circuit D +V V Terminal No. Ω Ω 1 Analog voltage output ( to V) (Note 1) V (Analog output) Analog output 1 Ω 3 Analog current output ( to ma) Alarm output (Note ) Tr ZD 1 ma max. *1 External D1 zero-adjustment input Internal circuit Users circuit + Load V DC ±1 % S(I) 1M(I) L (SUS3) (SUS1) Sensing object t 1 mm t.39 in ML(I) 1.39 (SUS3) (SUS1) L Sensing object 3 3 t 1 mm t.39 in (SUS3) (SUS1) 1F(I) L Sensing object 1 1 t 1 mm.. t.39 in (SUS3) (SUS1) L Sensing object 1 1 t 1 mm t.39 in
5 191 High Accuracy Eddy Current Type Sensor SERIES PRECAUTIONS FOR PROPER Refer to p.19 for general precautions. Make sure to use in combination the and amplifier which have the same production serial number ( digits). Since adjustment is done before shipment, if items with different production serial numbers are combined, the sensing characteristics will deteriorate even if they have the same model number. The length of the cable cannot be changed. Linearity in case of disc-shaped or cylindrical objects In case the sensing object is disc-shaped or cylindrical, the linearity of the analog output varies with the sensing object size. In such a case, conduct zero adjustment when close mounting and, by adjusting to the maximum sensing distance and to V as the voltage output (current output ma), linearity (±. % F.S.) can be attained on a full-scale if the sensing object s size is larger than those described in the table below. Model No. disc diameter ø (mm in) cylinder diameter ø (mm in) S(I) S(I) M(I) ML(I) F(I) <In case of disc> disc ø (mm in) t: 3 mm.11 in Mounting t <In case of cylinder> cylinder l ø (mm in) l: mm 1.99 in Mounting with set screw The tightening torque should be under the value given below. Make sure to use an M3 or smaller set screw having a cup-point. <Non-threaded type > Mounting with nut The tightening torque should be under the value given below. <Threaded type > 1M(I) B Attached toothed lock washer Mounting plate Never use this product as a sensing device for personnel protection. In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. Set screw (M3 ) (Cup-point) Model No. A (mm in) Tightening torque A S(I).19. N m S(I). N m Note: Do not apply excess torque. 1ML(I) B Attached toothed lock washer Mounting plate Model No. B (mm in) Tightening torque 1M(I). 9. N m 1ML(I) 1.1 N m Note: Install in such as way so that the nut does not protrude from the screw. Mounting 1(l) Distance from surrounding metal As metal around the sensor may affect the sensing performance, pay attention to the following points. <Embedding of the sensor in metal> Since the analog output may change if the sensor is completely embedded in metal, keep the minimum distance specified in the table below. Non-threaded type threaded type Model No. C (mm in) D (mm in) S(I) ø1.1 S(I) C ø.9 D Metal 1M(I). 1ML(I) ø ø <Front sensing type > 1F(I) can be used by being completely embedded in metal. However, the surrounding metal should not protrude beyond the Metal sensing face. Mutual interference When two sensor heads are installed in parallel or face to face, since the specifications may not be met, keep the minimum separation distance specified in the table below. Model No. Non-threaded type threaded type Between I type and non- I type E E (mm in) Front sensing type Between two I types or two non- I types S(I) S(I) 1M(I) ML(I) F(I) Notes: 1) I type is different type. ) If the required resolution is lower than the specification (. % F.S.), it is possible to bring the s nearer than the separation distances given in the table above. For further details, please contact our office. Dimensions of suitable crimp terminals (Unit: mm in) Y type Round type (After crimping).3 ø3. ø Note: Please use crimp terminals which have insulation sleeves. Recommended crimp terminal: Type s M3 countersunk head screw mm.31 in -M3 tapped or thru-holes M3 nut Spring washers Plain washers E E (After crimping) Do not use during the initial transient time (. sec.) after the power supply is switched on. Do not use the sensor at places having intense vibrations, as this can cause malfunction.
6 High Accuracy Eddy Current Type Sensor SERIES 19 DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website. S(I) S(I) 1M(I) 1.1 M ML(I).. ø. ø.9 high coaxial cable, 3 m 9.3 ft long ø. ø.13 ø.. ø ø. ø.9 high coaxial cable, 3 m 9.3 ft long ø ø.31 ø.. ø. 1.1 ø1 ø ø. ø.9 high coaxial cable, 3 m 9.3 ft long. 1.1 Toothed lock washer (internal tooth).. ø. ø. ø. ø.9 high coaxial cable, 3 m 9.3 ft long All models Cover removed condition -ø ø.19 mounting holes -ø. ø.33.9 Suitable for 3 mm 1.3 in width DIN rail for connection (119) (.). (1) (3.93) Power indicator (Green) Over indicator (Orange) Alarm indicator (Yellow).99 1F(I) ø1.1 ø.39 ø1 ø Center of sensing M Toothed lock washer (internal tooth).31 ø. ø.9 high coaxial cable, 3 m 9.3 ft long ø.. ø countersunk mounting holes for M3 ø. ø. Shift-down button Shift-up button Zero-adjustment button Span adjuster Button operation effective/ ineffective selection switch MS-SS MS-SS A Material: Nylon B.1.1 -ø3. ø.13 mounting holes C D Mounting bracket for S(I) (Optional), mounting bracket for S(I) (Optional) Model No. Item MS-SS MS-SS A 1.9. B C D.1... Applicable model S(I) S(I)
High Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67g environment resistance
13 High Accuracy Eddy Current Type Sensor SERIES Related Information General terms and conditions... F- Glossary of terms... P.139 Sensor selection guide... P.9~ General precautions... P.1 PHOTO PHOTO
More information40 mm Beam Pitch General Purpose Area Sensor NA40 SERIES
9 0 mm Beam Pitch General Purpose Area Sensor SERIES Related Information General terms and conditions... F- Glossary of terms / General precautions...p.59~ / P.55~ guide... P.9~ Korea s S-mark... P.60
More informationNA DigiParts GmbH. Small / Slim Object Detection Area Sensor
953 PHOTO PHOTO MEASURE ITY Object Area Sensor General terms and conditions... F-7 Related Information Glossary of terms... P.1455~ Cross-beam scanning system to detect slim objects Letters or business
More informationNA1-11. Small / Slim Object Detection Area Sensor. Cross-beam scanning system to detect slim objects. Letters or business cards detectable!
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
More informationSS-A5 SERIES SH SERIES
395 Manually Sensitivity Set Photoelectric Sensor SS-A5 SERIES SH SERIES Amplifi er-separated General terms and conditions... P.1 Sensor selection guide...p.11~ / P.9~ Related Information SH Specifications
More informationNA1-11. Small / Slim Object Detection Area Sensor. Cross-beam scanning system to detect slim objects
929 PHOTO PHOTO MEASURE Object Area Sensor General terms and conditions... F-3 Related Information Glossary of terms... P.1549~ panasonic.net/id/pidsx/global guide...p.85~ General precautions... P.1552~
More informationLED Collimated Beam Sensor LA-300 SERIES. LED collimated beam type which is as accurate as a laser sensor, but much safer.
99 PHOTO PHOTO LED Beam Sensor - SERIES Related Information General terms and conditions... P.1 Sensor selection guide...p.11~ / P.~ CA... P.79 ~ General precautions... P.7 Conforming to EMC Directive
More informationEX-40 SERIES. Convergent Reflective Photoelectric Sensor. Reliable object detection in limited area. Stable convergent distance sensing
313 PHOTO PHOTO Convergent Reflective Photoelectric EX-4 SERIES Related Information General terms and conditions... F-3 Glossary of terms / General precautions...p.1549~ / P.1552~ guide... P.231~ Korea
More informationLED Collimated Beam Sensor LA-300 SERIES. LED collimated beam type which is as accurate as a laser sensor, but much safer.
99 PHOTO PHOTO LED Beam Sensor - SERIES Related Information General terms and conditions... P.1 Sensor selection guide...p.11~ / P.~ CA... P.79 ~ General precautions... P.7 Conforming to EMC Directive
More informationTriple Beam Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in. panasonic.net/id/pidsx/global
337 Triple Beam Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1549~ guide... P.231~ General precautions... P.1552~ PHOTO
More informationColor Detection Fiber Sensor FZ-10 SERIES. Reliable and precise color discrimination. Red, green and blue LEDs. Easy set up
909 PHOTO PHOTO Color Sensor FZ SERIES Related Information General terms and conditions... F3 Glossary of terms... P.1549~ guide...p.65~ General precautions... P.155~ Recognition MEASURE panasonic.net/id/pidsx/global
More informationNA1-PK3 SERIES. Compact Size Picking Sensor. Boasts a compact, pocket lighter size enabling universal installation
44 PHOTO PHOTO Compact Size Sensor NA-PK SERIES Related Information General terms and conditions... F- Glossary of terms... P.549~ guide... P.49~ General precautions...p.55~ Recognition Make sure to use
More informationEmitting and receiving element pitch: 10 mm in
Small / Slim Object Detection Area Sensor Cross-beam scanning system to detect slim objects Letter or visiting card detectable! Slim objects can be detected by using the cross-beam scanning system. Emitting
More informationTriple Beam Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in
371 Triple Beam Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.1455~ selection guide... P.271~ General precautions... P.1458~
More information12 V DC ±10 % 150 ma max. 130 ma max. 120 ma max.
96 PHOTO PHOTO ON/OFF Input SERI Related Information General terms and conditions... F-3 General precautions... P.9 MEASURE panasonic.net/id/pidsx/global Multi-functional D rail mounting slim sensor controller
More informationUS-N300. Suitable for Detecting Transparent Films or Transparent Bottles ULTRASONIC SENSOR. Reliable Detection of Transparent Objects
AUDIN Composants & systèmes d'automatisme 7 bis rue de Tinqueux - 51 Reims - France Tel. +33()3264221 Fax +33()3264282 http://www.audin.fr e-mail info@audin.fr Ultrasonic Sensor Suitable for Detecting
More informationUltra-slim Body Picking Sensor NA1-PK5 SERIES NA1-5 SERIES. Even a slim hand is detectable by the 25 mm in pitch beam area sensor
43 PHOTO PHOTO Ultra-slim Sensor NA-PK5 SERIES SERIES General terms and conditions... F-3 guide... P.49~ Related Information Glossary of terms... P.549~ General precautions... P.55~ Recognition Make sure
More informationA new approach to static electricity countermeasures
Advanced intelligent Sensors NEW ELECTROSTATIC SENSOR EF-SSERIES A new approach to static electricity countermeasures Measurement of surface potentials while a production line is running Phone: 8.894.42
More informationNA1-PK3 SERIES. Compact Size Picking Sensor. Boasts a compact, pocket lighter size enabling universal installation
497 Compact Size Sensor NA-PK SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.59~ Sensor selection guide... P.475~ General precautions...p.5 PHOTO PHOTO Conforming
More information40 mm Beam Pitch General Purpose Area Sensor. Failure monitoring
OTHER SUNX PRODUCTS NA0 SERIES 0 mm Beam Pitch General Purpose Area Sensor Diagnosis Self-diagnosis Interference prevention Slim and intelligent Refer to p.9l for the light curtain. Slim body Failure monitoring
More informationUltra-slim Body Picking Sensor NA1-PK5 SERIES NA1-5 SERIES. Even a slim hand is detectable by the 25 mm in pitch beam area sensor
473 PHOTO PHOTO Ultra-slim Sensor NA-PK5 SERIES SERIES General terms and conditions... F-7 Sensor selection guide... P.4~ Related Information Glossary of terms... P.455~ General precautions... P.458~ Conforming
More informationTriple Beam Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in
377 PHOTO PHOTO USE MEASUREMENT STATIC CONTROL Triple Beam Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-17 Glossary of terms... P.1359~ selection
More informationEmitting and Receiving Element Pitch: 10mm
Small/Slim Object Detection Area Sensor Cross-beam Scanning System to Detect Slim Objects Marked Conforming to EMC Directive Letter or Visiting Card Detectable! Slim objects can be detected by using the
More informationUltra-slim Body Picking Sensor NA1-PK5 SERIES NA1-5 SERIES. Even a slim hand is detectable by the 25 mm in pitch beam area sensor
487 Ultra-slim Sensor NA-PK5 SERIES SERIES General terms and conditions... F-7 Sensor selection guide... P.475~ Related Information Glossary of terms... P.359~ General precautions... P.45 PHOTO PHOTO Conforming
More informationAmplifier-separated Manual Sensitivity Setting Photoelectric Sensor
-separated Manual Sensitivity Setting Photoelectric Sensor Twin Adjuster Enables Delicate Sensitivity Setting Twin Adjuster Its twin adjuster enables easy optimum setting to suit the application. Twin
More informationCylindrical Photoelectric Sensor
SERIES Cylindrical Photoelectric Amplifier Built-in Cylindrical type easily mountable with M Conforming to EMC Directive AC supply type conforms to Low Voltage Directive, too. ( ) UL Recognition M This
More informationEasy to replace. A pigtailed type sensor with connector (CY- -J), which is easy to replace, is also available. Environment resistant
EQ- VF NX PM PM MS-AJ RT-6 PX- PHOTOELECTRIC SENSORS Mounting Stand SERIES Cylindrical Photoelectric Test input PNP output Light intensity type available monitor M This sensor has an M size for convenient
More informationGeneral Purpose & Slim Body Area Sensor NA2-N SERIES. Slim body 13 mm in Maximum sensing height 540 mm in
PHOTO PHOTO General Purpose & Area Sensor NA-N SERIES Related Information General terms and conditions... F- Glossary of terms / General precautions...p.59~ / P.55~ guide... P.9~ Korea s S-mark... P.0
More informationSafe red LED beam. Span & shift adjustment. Light beam. Receiver. Emitter. Sensing object. Darkest condition 1.00 V 1.49 V Setting condition 2.
LA- SERIES LED Collimated Beam Sensor LA LA- HL-T1 LM1 LH-5 HL-C1 Compact size Its emitter and receiver are much smaller compared to those of the amplifier built-in type (LA-51). Hence, they can be installed
More informationTwin adjuster enables delicate sensitivity setting
PHOTOELECTRIC SENSORS Manually Sensitivity Set Photoelectric Sensor Amplifier-separated Diagnosis Self-diagnosis Timer Light intensity monitor Interference prevention CHX-SC SU-7/SH Twin adjuster enables
More informationThough the size is compact, the measurement display uses 4 digit, 8 mm in letter height, red 7-segment LEDs. Letter height 8mm (0.
SERIES Ultra-compact Digital Panel Controller CA Convenient s packed in a small body! Ultra-compact Large display Flexible scaling Conforming to EMC Directive Ultra-compact size of W 48 H 24 D 65.5 mm
More informationLX-100 SERIES. Digital Mark Sensor Amplifier Built-in. Introduction of the 3 LED mark sensor 4:1. Can detect any mark!
899 PHOTO PHOTO Digital Mark Sensor Amplifier Built-in SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.149~ guide...p.86~ General precautions... P.12~ Recognition
More informationM-DW1. Wafer Mapping Sensor. The safe LED beam reflective type wafer mapping sensor. Safe LEDs adopted. Sensing of nitride-coated wafers possible
915 PHOTO PHOTO OPTIS Mapping Sensor General terms and conditions... F3 Related Information General precautions... P.1552~ guide... P.865~ Recognition MEASURE CTROL panasonic.net/id/pidsx/global The safe
More informationCX-20 SERIES. General purpose photoelectric sensor with full basic performance. Compact Photoelectric Sensor OTHER SUNX PRODUCTS
OTHER SUNX PRODUCTS CX- SERIES Compact Photoelectric Diagnosis Self-diagnosis PNP output Light intensity Interference type available monitor prevention Amplifier Built-in UL Recognition General purpose
More informationUSER S MANUAL. EX-20 Series. Amplifier Built-in Ultra-compact Type Photoelectric Sensor
Amplifier Built-in Ultra-compact Type Photoelectric Sensor EX-20 Series USER S MANUAL WUME-EX20-3 Contens 1. Cautions 3 2. Part Description 4 3. Mounting 6 3-1 Mounting the sensor 6 3-2 Mounting to sensor
More informationSUPER-SLIM PHOTOELECTRIC SENSORS. The sensor is suitable to detect small and high-speed traveling objects.
SUPER-SIM PHOTOEECTRIC SENSORS UZB1/2 series AMPIFIER BUIT-IN EXTRAORDINARIY DOWN-SIZED The Smallest Body Just mm inch Thick High-speed Response Time :.5ms Flexible Mounting Just W1H1.5Dmm W.39 H.571Dinch
More informationFEATURES. 15 m ft. 4 m ft. 2 m ft. 100 mm in. 600 mm in. 15 m ft. 4 m ft. 2 m ft. 100 mm 3.
273 Cylindrical Photoelectric Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1549~ guide... P.231~ General precautions... P.1552~ PHOTO PHOTO MEASURE -LS200
More informationAmplifier Built-in Cylindrical Photoelectric Sensor
PHOTOEECTRIC SENSORS EQ- SERIES Amplifier Built-in Cylindrical Photoelectric Cylindrical Type Easily Mountable with M Thread - Marked Conforming to EMC Directive AC supply type conforms to ( ow Voltage
More informationNon-Ferrous-Metal-Detecting Proximity Sensor (Separate Amplifier Type)
Non-Ferrous-Metal-Detecting Proximity Sensor (Separate Amplifier Type) ECY-SD Proximity Sensor with Separate Amplifier Unit for Detection of Non-ferrous Metals with Simple Adjustment Detects aluminum,
More informationEasy operation even for beginners! Optimum settings can be realized with simple operations
SENSORS FOR FX-0-F Digital Fiber Sensor for Leak Detection / Liquid Detection Fibers Only FX-0-F FT-F9 FD-F EX-F0/F60 HD-T M SH- FD-L M-DW * UL 600C- compatible, Passed the UL 99 Environment Test based
More informationUSER S MANUAL. EX-30 Series. Amplifier Built-in Type Threaded Miniature Photoelectric Sensor
Amplifier Built-in Type Threaded Miniature Photoelectric Sensor EX-30 Series USER S MANUAL WUME-EX30-3 Contents 1. Cautions 3 2. Part Description 4 3. Mounting 5 3-1 Mounting the sensor 5 3-2 Installation
More informationHigh Reliability Of Fiber Optic Amplifier For Convenient Mounting
Amplifier Reliability Of Amplifier For Convenient Mounting Features speed response: Max. 0.5ms Auto (Button setting)/remote synchronization input, mutual interference protection, selfdiagnosis Reverse
More informationLA-T SERIES. Fast and reliable minute granular flaw detection in winding wires. Winding Wire Granular Flaw Detector PARTICULAR USE SENSORS
SERIES Winding Wire Granular Flaw Detector Orders accepted till September, 2003 Production to be discontinued from April, 2004 Fast and reliable minute granular flaw detection in winding wires Slim Reliable
More informationE2F. Cylindrical Proximity Sensor in Plastic Housing. Applications. Ordering Information. Sensors. Accessories (Order Separately)
Cylindrical Proximity Sensor in Plastic Housing High quality full body plastic housing for high water proof requirements Polyarylate housing for light chemical resistance Applications Detection of bottle
More informationLong sensing range. Most suitable for conveyor lines and parking lot applications. 10 m ft (Red LED)
SERIES Compact Multi-voltage Photoelectric Multi-voltage Interference prevention Multi-voltage The series can operate a to 2 V AC or to 2 V DC, which makes it suitable for supply voltages all over the
More informationAnalog output type for diverse applications
FIBER SENSORS Slim Body Analog Sensor Interference prevention Analog output type for diverse applications FZ-1 FX-311 FX-CH FX-33 Color Detection Analog Output Manually Set Bank Unit FX-3 FX-31 Analog
More informationTL-W. Standard Flat Inductive Proximity Sensors. Ordering Information. Front and side facing surface IP67 DC 2-wire and DC 3-wire models
Standard Flat Inductive Proximity Sensors Front and side facing surface IP67 DC -wire and DC -wire models Ordering Information DC -wire Models Shape distance Model Output and operating status mm MD1 *1
More informationInductive Proximity Sensor
Inductive Proximity Sensor Linear Proximity Sensor with High-accuracy Resolution Resolution is 0.05% of the maximum sensing distance. The model with a sensing distance of 1.2 mm ensures a resolution of
More informationCapacitive Proximity Sensor
Capacitive Proximity Sensor Compact and Ideal for Robot Hands and Various Built-in Applications for LCD, Wafer, and PDP (Plasma Display Panel) Detection Flat head is only 5.5-mm thick. Robot Cable ensures
More informationIncludes an analog CMOS processor ASIC
The world standard CX-00 series s that are environmentally and user friendly. The total lineup of 18 models covers through the inclusion of a newly developed custom integrated circuit. This CX-00 series
More informationTwo outputs: contact and non-contact
SRIS Sensor Controller Multi-functional slim sensor controller DI rail mounting Two outputs: contact and non-contact Connects two sensors -C7W Mountable on 3 mm.378 in DI rail by one-push. It reduces mounting
More informationRelays & Sockets. RF1V Force Guided Relays/SF1V Relay Sockets. Certification Organization/ File Number. UL/c-UL File No.
RFV Key features: Compact and EN compliant RFV force guided relays Force guided contact mechanism (EN00 Type A TÜV approved) Contact configuration -pole (NO-NC, 3NO-NC) 6-pole (NO-NC, NO-NC, 3NO-3NC) Built-in
More informationCylindrical type proximity sensor
Cylindrical type Cylindrical type proximity Features Improved the noise resistance with dedicated IC Built-in reverse polarity protection circuit (DC 3-wire type) Built-in surge protection circuit Built-in
More informationCX-440SERIES. Hysteresis 2 % & Difference in sensing range between white and black 1 %
COMPACTADJUSTABLE RANGE REFLECTIVE PHOTOELECTRIC SENSOR Amplifier Built-in CX-SERIES Conforming to EMC Directive UL Recognition Hysteresis % & Difference in sensing range between white and black 1 % Ultra
More informationZ4D-F. LED-type Micro Displacement Sensor with Many Features in a Compact Body. Micro Displacement Sensor. Ordering Information.
/ Length Micro Sensor LED-type Micro Sensor with Many Features in a Compact Body Compact body only /4th the volume of our previous product. % cost reduction over our previous product. High performance
More informationD7F. Detects Changes in Machine. Vibration. Vibration Sensor with Linear Output or Manual Setting. Ordering Information
with Linear Output or Manual Setting Detects Changes in Machine ON/OFF output can be set and checked quickly and easily from the vibration level meter. waveforms can be checked using the AC monitor output.
More informationHigh Speed, Multi-point Laser Displacement Sensor HL-D3 SERIES. panasonic.net/id/pidsx/global
1063 PHOTO PHOTO SAFETY USE MEASUREMENT HUMAN FA VISION UV CURING Beam Sensors Double-feed Detection Other Products High Speed, Multi-point Sensor SERIES Related Information Ver.2 General terms and conditions...
More informationCX-20. Amplifier Built-in Compact Photoelectric Sensor. General Purpose Photoelectric Sensor with Full Basic Performance SERIES.
CX- SERIES Amplifier Built-in Compact Photoelectric General Purpose Photoelectric with Full Basic Performance Marked Conforming to EMC Directive Compact Size Two s Mountable Together Waterproof Just mm
More informationPROXIMITY SENSOR TERMINOLOGY
Never use this desk reference for installation or operation of equipment. Refer to manual for installation and operation instructions. The following descriptions refer to the European standard EN 60947-5-2.
More informationIncorporated with red marker. Suitable for high speed production line
PARTICUAR USE SENSORS SERIES Hot Melt Glue Detector Quick, reliable and non-contact detection of hot melt glue EZ- Miniature sensor head Spot type The sensor head can be mounted in a congested and tight
More informationInstruction Manual Inductive Gauging Sensor
Instruction Manual Inductive Gauging Sensor EX-200 Series 96M0367 CONTENTS Page Part names and functions...3 Connections/Hints on correct use... 4 Installations... 5 Adjustment... 6 Specifications... 7
More informationSF4-AH SERIES. Small Light Curtain Type 4. Compact size of mm in Type 4 light curtain ORDER GUIDE.
569 PHOTO PHOTO Small Curtain Type 4 SF4-AH SERIES Related Information General terms and conditions... P.1 SF-AC... P.588 Glossary of terms... P.983 ~ General precautions... P.986 ~ Conforming to Machine
More informationCompact Photoelectric Sensor
CX-00 Photoelectric s Compact Photoelectric The CX-00 series of photoelectric sensors is a wide-ranging lineup of 116 different models. Whatever your application entails, SUNX has covered it with this
More informationSERIES. Amplifier Built-in Adjustable Long Range & Fixed-focus Reflective Photoelectric Sensor
EQ-3 SERIES mplifier Built-in djustable ong Range & Fixed-focus Reflective Photoelectric Unaffected by Color or Material, m istance djustable Fixed-focus Marked Conforming to EMC irective Not ffected by
More informationEQ-500 ADJUSTABLE RANGE REFLECTIVE PHOTOELECTRIC SENSOR. Long sensing range 2.5 m SERIES. Not affected by background objects
EQ-5 SERIES ADJUSABLE RANGE REFLECIVE PHOOELECRIC SENSOR Multi-voltage Amplifier Built-in Long sensing range.5 m Multi-voltage EQ5 Because it can function with to V AC and to V DC, almost any power supply
More informationworld smallest* Self-Contained High Precision Laser Sensor
Amplifier Built-in UTRA-COMPACT ASER SENSOR EX- SERIES FDA Unrivaled world smallest* Self-Contained High Precision aser * Based on research conducted by our company as of January 1 1. panasonic.net/id/pidsx/global
More informationpanasonic-electric-works.net/sunx Supports beam axis alignment at startup and quick restoration in case of trouble
521 Compact Safety Beam Type 4 SERIES Related Information General terms and conditions... F-17 General precautions... P.1405 PHOTO PHOTO MEASURE Category 4 PLe SIL3 panasonic-electric-works.net/sunx From
More informationLX-100 SERIES Conforming to EMC Directive
PHOTOELECTRIC SENSOR DIGITAL MARK SENSOR LX-100 SERIES Conforming to EMC Directive Introducing the ultimate mark sensor High resolution A/D converter Automatic optimal LED selection function Lead-free
More informationEQ-500 SERIES. Long sensing range 2.5 m ft. Series expanded to include the new 1 m ft long sensing range and DC-voltage types!
PHOTOELECTRIC SENSOR ADJUSTABLE RANGE REFLECTIVE PHOTOELECTRIC SENSOR Multi-voltage Amplifier Built-in EQ-5 SERIES Conforming to Low Voltage and EMC Directive DC-voltage type conforms to EMC directive
More informationpanasonic-electric-works.net/sunx A line width of approx. 240 mm in (typical) at a 1,000 mm in sensing distance
6 PHOTO PHOTO Digital Laser Sensor -separated SERIES Related Information General terms and conditions... F-7 SC-GU-C... P.9~ About laser beam... P.0~ Sensor selection guide... P.~ Glossary of terms / General
More informationGlobal Standard. Upgraded to Increase Usability. Achieving low power consumption and high noise-resistance The basic types are added in lineup
Amplifier Built-in Compact Photoelectric CX-00 SERIES Ver.2 UL Recognition Certified (Some models only) Global Standard Upgraded to Increase Usability Achieving low power consumption and high noise-resistance
More informationE2C-EDA. Proximity Sensor with Separate Amplifier Enables Easily Making Highprecision Sensitivity Settings. Ordering Information
Authorised Distributors:Intech Systems Chennai Pvt. Ltd, Chennai-00 032 Ph: +91 44 4353 Fax: 044 4353 7 E-mail: info@intechchennai.com Website: www.intechchennai.com High Precision Positioning Inductive
More informationStandard type. Basic type. 1 Stability indicator (green) 2 Operation indicator (orange) 4 Operation mode switch. 5 Power indicator (green)
INSTRUCTIS Compact Photoelectric Sensor CX-00 Series MEUEN-CX00 V. Thank you for purchasing products from Panasonic. Please read this Instruction Manual carefully and thoroughly for the correct and optimum
More informationE3X-NL. Employs OMRON's Unique Free Angle Optics Technology for Detecting Minute Differences in Glossiness. Optical Fiber Glossy Object Sensor
Authorised Distributors:- AS & AAIN INDIA PVT TD S-1, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-112(India) Tel : 11-43797575 Fax : 11-43797574 E-mail : sales@ashalain.com Fiber Glossy Object
More informationHigh Accuracy Positioning Sensors EG Series Features
High ccuracy Positioning s EG Series Features Ultra-small sensor head Non-contact, stable detection in wide temperature range Highly stable amplifier provides 1 µm. Mil repeatability Hi/Lo tolerance detection
More informationE2B PROXIMITY SENSORS
Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-00 0 Ph: +9 8888 Fax: 0 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com EB PROIMITY SENSORS A ne w g ener ation in
More informationCYLINDRICAL TYPE PHOTOELECTRIC SENSORS. Easy to Replace. The sensor with a connector (UZC---A) makes its replacement easy. Environment Resistant
CYINDRICA TYPE PHOTOEECTRIC SENSORS UZC Series SIMPE MOUNTING WITH A M8 THREAD M8 Thread This sensor has a M8 thread on an enclosure, which is convenient for mounting. Easy to Replace The sensor with a
More informationProduct Discontinuation Notices
PRODUCT NEWS Product Discontinuation Notices August 1, 2011 Ultrasonic Sensors No. 2011264E Discontinuation Notice of Ultrasonic Sensor E4A special specification model, E4B special specification model,
More informationOperating mode. distance. 7 m Light ON Dark ON (selectable) 2 m [100 mm] (See note 1.) 100 mm (wide view)
Built-in Amplifier Photoelectric Sensor E3S-A/B Revolutionary High-performance High-quality Sensor with Built-in Amplifier can be adjusted in seconds because the optical axis coincides with the mounting
More informationSeries 10-ZSE30A(F)/10-ISE30A
Series 10-ZSEA(F)/10-ISEA RoHS 2-Color Display High-Precision Digital Pressure Switch Clean series For positive For vacuum/ compound Rated range ISEA 0.1 to 1 MPa How to Order 10 ISEA 01 N M 01 N01 C4H
More informationDigital Fiber-Optic Switches
CP-PC-2259E Digital Fiber-Optic Switches Model HPX-EG0 0/01 : Standard Model HPX-EG/ 51 : Long-dis tance Sensing Satisfaction Freedom from Frequent Adjustments Please read Terms and Conditions from the
More informationHigh-speed Sub-micron Displacement Sensor with 40,000 Samples/sec. High Accuracy Inductive Gauging Technology
High-speed, High-Accuracy Digital Displacement Inductive Sensor EX-V Series High-speed Sub-micron Displacement Sensor with 40,000 Samples/sec. High Accuracy Inductive Gauging Technology High-Performance
More informationHG-C SERIES. Micro Laser Distance Sensor. Reliable detection in 10 μm precision. We offer three types of laser sensor heads for various applications
215 PHOTO PHOTO LIGHT CURTAINS / USE Micro Laser Distance Sensor SERIES Related Information General terms and conditions... F-7 Glossary of terms / General precautions.. P.1455~ / P.1458~ Sensor selection
More informationTL-W5MD1 2M *1 *3 TL-W5MD2 2M
Flat Inductive CSM DS_E_9_ Standard Flat s in Many Different Variations Only mm thick yet provides a sensing distance of mm (MC). Aluminum die-cast models also available. Be sure to read Safety Precautions
More informationE2S World's Smallest Square Sensor with Built-in Amplifier
Compact Square Inductive ES World's Smallest Square Sensor with uilt-in mplifier Features 5.5 mm World's Smallest Sensor with uilt-in mplifier The 5.5 mm x 5.5 mm type permits smaller, space-saving machines
More informationE3S-CR62/67. Ideal for detecting transparent glass and plastic containers. Transparent bottle sensor. Features
bottle sensor Ideal for detecting transparent glass and plastic containers Features Stable operation even if container interval is shortened for higher productivity. Stable detection of 5 mm gaps that
More informationRectangular Type APS-S/M Series
APS-CU APS- 5 APS-F/U APS-S/M APS-CK APS-0/ APS-GK APS-GM APS-GMD APS-GMC Small design offered in two types: front face sensing and upper sensing. Different-frequency type that allows close-contact installation.
More informationES Series Features Detecting distance twice that of conventional
Long-distance Separate-amplifier Series Features Detecting distance twice that of conventional sensors Detecting distance easily adjustable Wide range of sensor head types available Built-in alarm output
More informationLED Displacement Sensor
LED Displacement Sensor Low-cost LED Displacement Sensor Offers 10-micron Resolution of 25 mm (0.98 in) with measurement range of ±4 mm (0.16 in). Easy-to-use, built-in amplifier. Fast 5-millisecond response.
More informationProximity Sensor Terminology
The following descriptions refer to the European standard EN 60947-5-2. of 2007. The specifications given here are intended to be minimum performance values described by the standard. Alignment must not
More informationUSER S MANUAL. NX-5 Series. Power Supply Built-in Compact Multi-voltage Photoelectric Sensor
Power Supply Built-in Compact Multi-voltage Photoelectric Sensor NX-5 Series USER S MANUAL WUME-NX5-3 Contents 1. Cautions 3 2. Part description 4 3. Mounting 6 3-2 Mounting interval (thru-beam type NX5-M
More informationFT-KV1SERIES FD-WL48
OPTICA FIBER HEAD WAFER MAPPING FIBER Retroreflective Type FR-KV1SERIES Thru-beam Type FT-KV1SERIES UTRA-COMPACT FIXED-FOCUS REFECTIVE FIBER FD-W48 Retrorefelctive type mapping fiber with ultra-thin..87
More informationpanasonic.net/id/pidsx/global A line width of approx. 240 mm in (typical) at a 1,000 mm in sensing distance
PHOTO PHOTO Digital Laser Sensor -separated SERIES Related Information General terms and conditions... F- SC-GU... P.97~ About laser beam... P.9~ guide... P.69~ Glossary of terms / General precautions...
More informationCX-400SERIES. World Standard. Strong, High and Less are the keywords understood internationally COMPACT PHOTOELECTRIC SENSOR. Amplifier Built-in
PHOTOELECTRIC SENSOR COMPACT PHOTOELECTRIC SENSOR Amplifier Built-in SERIES Conforming to EMC Directive UL Recognition World Standard Strong, High and Less are the keywords understood internationally We
More informationUltra High-speed Laser Displacement Sensor CCD Style. panasonic.net/id/pidsx/global
191 PHOTO PHOTO IGHT MEASURE ITY Ultra High-speed Sensor CCD Style SERIES Related Information General terms and conditions... F-7 Glossary of terms / General precautions...p.1493 / P.151 * The series will
More informationUSA series. Capable of long-distance measurement Built-in teaching function for simple operation and highlyaccurate
series Ultrasonic displacement sensors (3m Type) Capable of long-distance measurement Built-in teaching function for simple operation and highlyaccurate measurement Integrated temperature sensor for stable
More informationSensing method Through-beam Retroreflective Diffuse reflective Convergent-beam Appearance Side-view Flat Side-view Flat Side-view
R Subminiature Photoelectric Sensor Omron s Next Generation of Sub-miniature Photoelectric Sensors H Utilizes Omron s Hyper LED technology to achieve the industry s smallest visible red beam H Self-contained
More informationA Revolution in Profile Measurement
2D Laser Displacement Sensor LS Series * FASTUS is a product brand of Optex FA. Linearity ±0.1% of F.S. Sampling period 0.5 ms (max. speed) Superbly affordable 2D measurement A Revolution in Profile Measurement
More informationHPJSeries HPJ. Ultraminiature Photoelectric Sensors with Self-contained Amplifier
Ultraminiature Photoelectric Sensors with Self-contained Amplifier HPJSeries HPJ Fingertip-size, Provided with a various slit attachments. (six types) Fingertip-size 22 x 11 x 8mm (thru scan model) 30
More informationIDEC RJ22 Series Slim Power Relays (Bifurcated Contacts)
IDEC RJ22 Series Slim Relays (Bifurcated Contacts) Phone: 00.94.042 - Fax:.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com RJ Series Slim Relay Plug-in Terminal (Bifurcated Contacts) High contact
More information