Features DIN Rail Universal AC Input (85) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 15% (18W) peak load capacity Builtin active PFC,PF>,95 High effciency up to 9.5% AC/DC Converter REDIN1 Description These DINrail mounted power supplies have a robust case, 4mm screw terminal connectors and use high reliability components to give a long, troublefree life. The REDIN1 can be end mounted to save rail space or side mounted for use in lowprofile cabinets. The units can deliver up to 15% startup power and allow n1 parallel operation to increase the continuous output current or for supply redundancy. Relay contacts simplify DC OK monitoring. The REDIN1 series is designed for demanding commercial and industrial applications with UL58, UL695, IEC695 CB report and CE (LVD EMC RoHS) certifications. They come with a full 5year warranty. 1 Watt DINRail Power Supply Selection Guide Part nom. Input Output Output Rated Efficiency Number Voltage Range Voltage Adjustability Current typ. 3VAC full load [VAC] [VDC] [VDC] [A] [%] REDIN11 14 1 114 8.33 89.5 REDIN14 14 4 48 5 91.5 REDIN148 14 48 4856.5 9.5 BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Voltage Range 85VAC Absolute Maximum Input Voltage Input Current Return Voltage Immunity Inrush Current No Load Power Consumption max. 3s, full load 3VAC, full load 1Vout 4Vout 48Vout, cold start 3VAC, cold start 3VAC 18V 35V 65V 4A 6A 1.5W W 3VAC 375VDC 1.5A.65A Input Frequency Range 47Hz 63Hz Output Voltage Trimming 16.67% Power Factor Startup time Holdup time Ripple and Noise (1) 3VAC, full load 3VAC, full load, full load 3VAC, full load 7 C 5 C 7 C 5 C 1Vout 4Vout ms ms.99.95 4ms 4ms 3W 3W 5ms 5ms 1mVpp mvpp 1mVpp 4mVpp 5 C 7 C 48Vout 4mVpp E4736 UL6951 certified UL58 certified IEC/EN6951 certified Notes: Note1: Measured at MHz bandwidth by using a 1 twisted pairwire terminated with a.1µf & 1µF parallel capacitor www.recompower.com REV.: 3/18 PDR1
REDIN1 REDIN11 Efficiency [%] 1 9 8 7 6 5 4 3 1 Efficiency vs. Load 3VAC 1 3 4 5 6 7 8 9 1 Power Dissipation [W] 18 16 14 1 1 8 6 4 Power Dissipation vs Load 3VAC 1 3 4 5 6 7 8 9 1 1.4 Input Current vs Load Power Factor vs Load over Vin Input Current [A] 1..8.6.4 3VAC Power Factor [%] 1..8.6.4 3VAC.. REDIN14 Efficiency [%] 1 3 4 5 1 9 8 7 6 5 4 3 1 Load Current [A] Efficiency vs. Load 3VAC 1 3 4 5 6 7 8 9 1 Power Dissipation [W] 1 3 4 5 6 7 8 9 1 18 16 14 1 1 8 6 4 Power Dissipation vs Load 3VAC 1 3 4 5 6 7 8 9 1 www.recompower.com REV.: 3/18 PDR
REDIN14 Input Current vs Load 1.4 REDIN1 Power Factor vs Load over Vin Input Current [A] 1..8.6.4 3VAC Power Factor [%] 1..8.6.4 3VAC.. 1 3 4 5 Load Current [A] 1 3 4 5 6 7 8 9 1 REDIN148 Efficiency [%] 1 9 8 7 6 5 4 3 1 Efficiency vs. Load 3VAC 1 3 4 5 6 7 8 9 1 Power Dissipation [W] 18 16 14 1 1 8 6 4 Power Dissipation vs Load 3VAC 1 3 4 5 6 7 8 9 1 1.4 Input Current vs Load Power Factor vs Load over Vin Input Current [A] 1..8.6.4 3VAC Power Factor [%] 1..8.6.4 3VAC...5 1 1.5.5 Load Current [A] 1 3 4 5 6 7 8 9 1 www.recompower.com REV.: 3/18 PDR3
REDIN1 REGULATION Parameter Condition Value Output Accuracy ±.5% typ. / ±1% max. Line Regulation ±.1% typ. / ±.5% max. Load Regulation % to 1% load.5% typ. / 1.% max. Transient Response 1Hz & 1kHz, 5% duty ±1% typ. / ± 5% max. PROTECTION Parameter Condition Value Input Fuse () internal T5A, slow blow type Short Circuit Protection (SCP) Over Voltage Protection (OVP) Over Voltage Category (OVC) Over Load Protection (OLP) Over Temperature Protection (OTP) Power OK LED Isolation Voltage Isolation Resistance Leakage Current Overload Capability 1Vout 4Vout 48Vout ON (green) OFF (red) Relay Contact Rating I/P to O/P I/P to PE O/P to PE I/P to O/P I/P to PE, 4VAC 5Hz Notes: Note: Refer to local wiring regulations if input overcurrent protection is also required hiccup mode (current limit) 1518VDC, hiccup mode 933VDC, hiccup mode 5865VDC, hiccup mode OVC II Constant power (current limit) 1±5 C, detect on Heatsink of power transistor; shut down O/P, auto recovery after temperature goes down Vout up to 9% of rated Vout Vout down to 8% of rated Vout Max. 3V/1A or 6V/.3 or 3VAC/.3A Resitive Load 3.kVAC / 1minute.5kVAC / 1minute.5kVAC / 1minute 1MW min..1ma typ. /.5mA max. 1.mA max. Pout [%] y 1 Time (x) [s] Pout (y) [%] 1 18 4 15 7 14 45 1 Maximum loading of automatic circuit breakers Circuit Breaker Typ Circuit Breaker Current ( devices) (3 devices) B 6A 6A 13A C 1A 1A 16A Note: Values could change depending on local mains x 6 Time [s] ENVIRONMENTAL Parameter Condition Value Operating Temperature Range (3) @ natural convection.1m/s full load 5 C to 55 C refer to derating graph 5 C to 7 C Temperature Coefficient.3%/K Operating Altitude (4) 3m Operating Humidity noncondensing % 9% RH www.recompower.com REV.: 3/18 PDR4
REDIN1 ENVIRONMENTAL Parameter Condition Value IP Rating IP Pollution Degree (PD) PD Shock 15Hz G, 6min. Vibration 1G /11ms, along x,y and z axis MTBF according to MILHDBK17F, full load, 5 C 3 x 1³ hours Thermal Derating 1 9 8 75 7 6 5 4 3 1 Pout cont. Pout 3VAC cont. 4 4 6 8 1 1 55 7 Ambient Temperature [ C] 15 1 8 6 4 Short time (3s) Operating Altitude A Ta<6 C B Ta>55 C 5 1 15 5 3 Operating Altitude [m] B A Notes: Note3: UL Report certified temperature range: 5 C to 5 C. According to RECOM internal qualification the device is rated up to 7 C with derating Note4: UL Report certified operating altitude: 5m. According to RECOM internal qualificaion the device is rated up to 3m. For altitude higher than m, derating 3W for evey 1m, or 5 C/1m SAFETY AND CERTIFICATIONS Certificate Type Report / File Number Standard Information Technology Equipment, General Requirements for Safety Industrial Control Equipment Information Technology Equipment General Requirments for Safety E4736 E4771 SA15816S 1 SA15816S UL6951, nd Edition, 14 CSA C. No. 69517, nd Edition, 14 UL58, 17th Edition, 13 CSA C. No. 17.11, 3rd Edition, 11 IEC6951, nd Edition 5, AM1:9 AM:13 EN6951:6, A11:9 A1:1 A1:11 A:13 EAC RUAT.37.367 TP TC 4/11 RoHs RoHs 11/65/EU EMC Compliance Report / Condition Standard / Criterion Information technology equipment Radio disturbance characteristics Limits and methods of measurement Information technology equipment Immunity characteristics Limits and methods of measurement Limitations on the amount of electromagnetic intererence allowed from digital and electronic devices Methods of Measurement of RadioNoise Emissions from LowVoltage Electrical and Electronic Equipment in the Range of 9 khz to 4 GHz EN55, Class B, 1 EN554, Class B, 1 47 CFR FCC Part 15, Subpart B: 14 ANSI C63.4: 14 www.recompower.com REV.: 3/18 PDR5
REDIN1 EMC Compliance Report / Condition Standard / Criterion ESD Electrostatic discharge immunity test Air ±8kV, Contact ±4kV EN614, Criteria B, 9 Radiated, radiofrequency, electromagnetic field immunity test 3V/m EN6143, Criteria A, 6 Fast Transient and Burst Immunity AC Power Port: LNPE ±1kV EN6144, Criteria B, 1 Surge Immunity AC Power Port LN ±1kV, LPE NPE ±kv EN6145, Criteria B, 14 Immunity to conducted disturbances, induced by radiofrequency fields AC Power Port 3V EN6146, Criteria A, 14 Power Magnetic Field Immunity 5Hz, 1A/m EN6148, Criteria A, 1 Voltage Dips and Interruptions Voltage Dips >95% Voltage Dips 3% Voltage Interruptions >95% EN61411, Criteria B, 4 EN61411, Criteria C, 4 EN61411, Criteria C, 4 Limits of Harmonic Current Emissions EN613, Criteria A, 14 Voltage Fluctuations & Flicker EN6133, Clause 5: 13 DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material case cover aluminium nickel plated steel Dimension (LxWxH) without mounting clip 114.5 x 33. x 14.4mm Weight 59g typ. Dimension Drawing (mm) DC OK V V 1.3 7. 4. 8.5 17.9 55. 8.4 56.9 14.4 N L PE 33. 114.5 43. 14. www.recompower.com REV.: 3/18 PDR6
REDIN1 41.5 46.1 1.6 Type Terminals and Wiring Screw Connector Solid Wire.56mm Stranded Wire.54mm American Wire Gauge (AWG) Wire Stripping Length Screwdriver (slotted / cross) AWG116 8mm 3.5mm Recommended tightening torque.5nm.8nm Tolerance: X.X ±.5mm X.XX ±.5mm INSTALLATION and APPLICATION Mounting Instruction Mounting 1 Releasing Click 1 www.recompower.com REV.: 3/18 PDR7
REDIN1 INSTALLATION and APPLICATION Mounting Multiple Power Supplies PARALLEL OPERATION 15mm 15mm leave 15mm gap between supplies 15mm Minimum Abstand L1 L L3 N PE V V DC OK V V DC OK V V DC OK L N PE Load DC OK Single Operation: 1) Make sure that the front panel switch is set to single Use. ) The output voltage can be increased by trim pot to compensate any cable losses. Parallel Operation: 1) Make sure that the front panel switch is set to single Use on each power supply. ) Adjust each power supply to the exact same output voltage with same load and cooling conditions. 3) Set the front panel switches to. Use the same wire length for each power supply (star connection) and energize all units at the same time to avoid triggering overload protection. Derate the maximum output power to 9% of nominal ratings. For operation with more than three power supplies in parallel or series operation, please contact RECOM technical support for advice. www.recompower.com REV.: 3/18 PDR8
REDIN1 BLOCK DIAGRAMM L N T5A Input Filter Power Stage Output Filter V V PE OTP Shut Down Protection Relay LED DC OK OCP Limit OVP Shut Down Output Voltage Regulation Single / Parallel PACKAGKING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) cardboard box 14. x 5. x 14.mm Packaging Quantity cardboard box 1pcs. Storage Temperature Range 4 C to 85 C Storage Humidity 5% 95% RH The product information and specifications may be subject to changes even without prior written notice.the product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safetycritical applications without RECOM s explicit written consent. A safetycritical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safetycritical applications. www.recompower.com REV.: 3/18 PDR9