Cal-Chip Electronics, Inc.

Similar documents
YAGEO CORPORATION SMD INDUCTOR / BEADS

YAGEO CORPORATION SMD INDUCTOR / BEADS. Notebook computers, step-up and step-down converters. Flash memory programmers, etc...

YAGEO CORPORATION SMD INDUCTOR / BEADS. SLF Series. Features. Low resistance and high currents

Power Inductors, Shielded

WIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES

(TRMA) Multilayer Ferrite Beads Chip Inductors. Token Electronics Industry Co., Ltd. Version: January 13, Web:

Multilayer Chip Bead CBM0805. Multilayer Chip Bead. Features. Applications. Constructions

Commom Mode Choke CUW Series

Chip Bead UPB Series. Automotive. Part Numbering. Recommend Reflow Profile. AEC-Q200. RoHS Compliant Halogen Free REACH Compliant

IWHQSeries FEATURES ORDERING CODE. SMD Wirewound Open-Type Chip Inductors (High Q /Frequency) 0805 TRIGON COMPONENTS

Wire Wound Chip Inductors LPI0805FT Series

Power Inductor MHCC/MHCI Series

ICL Series SMD Wirewound Chip Open-Type Inductors - ICL0603, ICL0805

SPECIFICATION FOR APPROVAL INDEX

Wire Wound Chip Inductor Low Profile Type LWL LWL1008. Features. Applications

Power Inductor SCD Series

Chip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application

Chip Bead PBY Series. Automotive. Part Numbering. Recommend Reflow Profile. AEC-Q200. RoHS Compliant Halogen Free REACH Compliant

(TRMB) Multilayer Bead RF Inductors. Token Electronics Industry Co., Ltd. Version: January 13, Web:

WIRE WOUND CHIP INDUCTORS SWI SERIES

Kun Shan MAZO tech Co., Ltd

WIRE WOUND CHIP INDUCTORS SWI SERIES

WIRE WOUND CHIP INDUCTORS SWI SERIES

Kun Shan MAZO tech Co., Ltd

INPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions

Wire Wound Chip Inductor

SPECIFICATION FOR APPROVAL

Kun Shan MAZO tech Co., Ltd

SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1

MICRO INDUCTORS. Features. Applications. Ordering Information. Shape and Dimensions MI - I J J T (1) (2) (3) (4) (5) (6) (7)

(TREC) Wire Wound RF Chip Inductor

WIRE WOUND CHIP INDUCTORS SWI SERIES

SMT Ferrite Chip Inductor SFI201212S Series

Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS

SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1

(TREM) High SRFs RF Inductor

Approval sheet. WQCW1005 SMD Wire Wound Ceramic Chip Inductors AEC-Q200. *Contents in this sheet are subject to change without prior notice.

Shielded Power Inductors TL1010SG Series

Shielded SMD Power Inductor

SPECIFICATION FOR APPROVAL. 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free)

SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSCDRI-104R-SERIES Page 1/8 MAG.

SPECIFICATION FOR APPROVAL. 1/32W, Low Resistance Chip Resistor (Lead / Halogen free)

Chip Resistors / Chip Arrays

Multilayer Ferrite Chip Inductor

Chip Beads & Inductors

Thin Film Current Sensing Chip Resistor (TCS Series)

This specification applies to the Pb Free high current type SMD inductors for

RF Inductor Series. Electronics Tech. Direct Electronics Industry Co., Ltd. Version: July 23, 2018

This specification applies to the Pb Free high current type SMD inductors for

High. FXL1350-XXX-M Power Choke R 0 1 / 9. Page : Applications. material. Powder iron core. Frequency range. up to 5MHz RoHS compliant.

Low Resistance Flat Chip Resistors Type SR73

P7605 Family POWER INDUCTOR PRODUCT DATA SHEET

Vectron International Temperatur sensor specification TFSS433D 1/6

RF WIREWOUND CHIP INDUCTORS

RF Inductor Series. Token Electronics Industry Co., Ltd. Version: February 24, Web:

Tfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit

Thin Film Precision Chip Resistor (AR Series)

VI TELEFILTER Filter Specification TFS 70U - 1/5

Tel: /Fax: , Kuanfu N Road, HsinChu Industrial Park, 303 Taiwan, ROC 1

RMC10,16,20,32,35,50,63 Automotive Grade Page: 1/10

Types MCM and MIN SMT Clad RF Capacitors

SPECIFICATION FOR APPROVAL PAGE: 1

Dielectric Antenna Elements

Types MCM and MIN SMT Clad RF Capacitors

SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSI SERIES Page 1/8 MAG.

Version: 1.2 Document code:ma2512 Effective date : Page: 1 of 7. Metal Alloy shunt resistor MA2512 series ROHS

FrelTec GmbH. Multilayer Ferrite Chip Inductor SMD

CR0603/CR0805/CR Chip Resistors

(1) SHAPES AND DIMENSIONS

Vectron International Temperatur sensor specification TFSS434B 1/6

CHIP COIL (CHIP INDUCTORS) LQG15HS 02D REFERENCE SPECIFICATION

VI TELEFILTER Resonator specification TFR 868D 1/5

P7605 Family POWER INDUCTOR PRODUCT DATA SHEET

MELF Coated Thin Film Precision Resistors (MELFC Series)

Automotive Chip Choke EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes

ITEM : CHIP POWER INDUCTORS APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE :

Vectron International Resonator Specification TFR 832 1/5

VS-701 High Shock Discrete Voltage Controlled SAW Oscillator

Types MC and MCN Multilayer RF Capacitors

HVR. Lead Wire Length (H, mm)

Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified

VI TELEFILTER Filter Specification TFS 246 H4 1/5

Notice for TAIYO YUDEN Products

Data sheet. FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free

Product Specifications Approval Sheet

Types MCM and MIN SMT Clad RF Capacitors

CHIP LC FILTERS. Features. Applications. Ordering Information. Shape and Dimensions LC J T (1) (2) (3) (4) (5)

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage SC type: NP0/X7R (Pb Free & RoHS compliant)

Type CPF Series. Thin Film Precision Resistors. Key Features

Types MCM and MIN SMT Clad RF Capacitors

SMD High Frequency Power Inductor. Designed for VRD & VRM 10.x & 11.x Applications

Product Specification File

ULTRA LOW POWER SMD METAL STRIP RESISTORS

VI TELEFILTER Filter Specification TFS 211 C 1/5

Shielded Power Inductors

Types MCH and MCHN Multilayer High RF Power Capacitors

Vectron International Filter specification TFS 121 1/5

Approval Sheet. Ceramic Patch Antenna. Type : Ceramic Patch Antenna Amotech Part No : A AMT02 Customer Part No : GPS&GLONASS

CERAMIC MICROWAVE FILTERS SAW FILTERS. SAF Series

Preliminary. 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Frequency 8 to 1500 MHz 2.2 Operating Temperature Range

Transcription:

Cal-Chip Electronics, Inc. Feature: These new SSL Series is designed for the smallest possible size, low cost and high performance. It's high energy storage and very low DC resistance offer higher saturated current which is suitable for DC to DC conversion for Notebook, Palm Top, Step up or Step down converters etc. Ordering Code: Type Size B = Bulk / T = Tape Dimension in mm: A B 101 SSL - 0804 - T - 3R3 - K - E D N = No Lead / S = Std Tolerance: K=±10% Inductance C Type A B C D (ref.) E (ref.) SSL-0402 6.60 max 4.45 max 2.92 max 1.27 1.02 SSL-0802 12.9 ± 0.4 9.0 ± 0.4 3.0 max 2.6 1.2 SSL-0804 12.9 ± 0.4 9.0 ± 0.4 5.21 max 2.6 1.2 SSL-0810 12.9 ± 0.4 9.0 ± 0.4 11.43 max 2.6 1.2 SSL-1306 18.5 ± 0.5 15.5 ± 0.5 7.5 max 2.6 2.54 Electrical: Type Inductance Rated Current SSL-0402- - - 1.0µH to 1000µH 2.9 Amps to 0.10Amps SSL-0802- - - 10µH to 1000µH 2.4 Amps to 0.1Amps SSL-0804- - - 1.0µH to 1000µH 9.0 Amps to 0.3Amps SSL-0810- - - 10µH to 1000µH 8.0 Amps to 0.8Amps SSL-1306- - - 1.0µH to 1000µH 8.6 Amps to 0.56Amps - 1 -

SSL - 0402 Series PART NO. Inductance (μh) ±20% SRF (MHz) RDC (Ω) MAX. I sat (A) Irms (A) SSL-0402-1R0 M 1.0 130 0.05 2.90 2.90 SSL-0402-1R5 M 1.5 115 0.05 2.60 2.80 SSL-0402-2R2 M 2.2 90 0.07 2.30 2.4 SSL-0402-3R3 M 3.3 70 0.08 2.00 2.0 SSL-0402-4R7 M 4.7 50 0.09 1.50 1.5 SSL-0402-6R8 M 6.8 45 0.13 1.20 1.4 SSL-0402-100 M 10 35 0.16 1.10 1.1 SSL-0402-150 M 15 30 0.23 0.90 1.0 SSL-0402-220 M 22 20 0.37 0.70 0.8 SSL-0402-330 M 33 15 0.51 0.58 0.6 SSL-0402-470 M 47 14 0.64 0.50 0.5 SSL-0402-680 M 68 11 0.86 0.40 0.4 SSL-0402-101 M 100 9 1.27 0.31 0.3 SSL-0402-151 M 150 6 2.00 0.27 0.25 SSL-0402-221 M 220 5.5 2.65 0.22 0.2 SSL-0402-331 M 330 5 3.80 0.18 0.16 SSL-0402-471 M 470 4 5.06 0.16 0.15 SSL-0402-681 M 680 3 9.20 0.14 0.12 SSL-0402-102 M 1000 2 13.8 0.10 0.07 # Operating Temperature range -40ºC to +85ºC - 2 -

SSL - 0802 Series Part Number Inductance at 100kHz 0.1Vrms (µh ± 20%) DC Resistance (Ω ± 15%) I sat² (Amps) Inductance drop = 10% SSL-0802-100M 10 0.09 2.4 SSL-0802-150M 15 0.12 2.0 SSL-0802-220M 22 0.19 1.6 SSL-0802-330M 33 0.25 1.4 SSL-0802-470M 47 0.32 1.0 SSL-0802-680M 68 0.55 0.9 SSL-0802-101M 100 0.70 0.7 SSL-0802-151M 150 1.0 0.6 SSL-0802-221M 220 1.6 0.5 SSL-0802-331M 330 2.2 0.4 SSL-0802-471M 470 3.3 0.3 SSL-0802-681M 680 4.4 0.2 SSL-0802-102M 1000 7.0 0.1 # Operating Temperature range -40ºC to +85ºC - 3 -

SSL- 0804 Series Part Number Inductance at 100kHz 0.1Vrms (µh ± 20%) DC Resistance (Ω ± 15%) I sat² (Amps) Inductance drop = 10% SSL-0804-1R0M 1.0 0.008 9.0 SSL-0804-1R5M 1.5 0.009 8.0 SSL-0804-2R2M 2.2 0.010 7.0 SSL-0804-3R3M 3.3 0.013 6.4 SSL-0804-4R7M 4.7 0.016 5.4 SSL-0804-6R8M 6.8 0.019 4.6 SSL-0804-100M 10 0.025 3.8 SSL-0804-150M 15 0.040 3.0 SSL-0804-220M 22 0.050 2.6 SSL-0804-330M 33 0.088 2.0 SSL-0804-470M 47 0.12 1.6 SSL-0804-680M 68 0.16 1.4 SSL-0804-101M 100 0.23 1.2 SSL-0804-151M 150 0.33 1.0 SSL-0804-221M 220 0.53 0.8 SSL-0804-331M 330 0.81 0.6 SSL-0804-471M 470 1.10 0.5 SSL-0804-681M 680 1.60 0.4 SSL-0804-102M 1000 2.15 0.3 # Operating Temperature range -40ºC to +85ºC - 4 -

SSL - 0810 Series Part Number Inductance (µh ± 20%) DC Resistance (Ω max) I sat² (Amps) SSL-0810-100M 10 0.033 8.0 SSL-0810-150M 15 0.042 7.0 SSL-0810-220M 22 0.054 5.5 SSL-0810-330M 33 0.080 4.0 SSL-0810-470M 47 0.10 3.8 SSL-0810-680M 68 0.17 3.0 SSL-0810-101M 100 0.22 2.5 SSL-0810-151M 150 0.34 2.0 SSL-0810-221M 220 0.44 1.6 SSL-0810-331M 330 0.70 1.2 SSL-0810-471M 470 0.95 1.0 SSL-0810-681M 680 1.20 1.0 SSL-0810-102M 1000 2.00 0.8 # Operating Temperature range -40ºC to +85º - 5 -

SSL - 1306 Series Part Number Inductance (µh ± 20%) DC Resistance (Ω ± 15%) I sat² (Amps) I rms³ (Amps) SSL-1306-1R0M 1.0 0.011 20 8.6 SSL-1306-2R2M 2.2 0.014 16 7.1 SSL-1306-3R3M 3.3 0.016 14 6.2 SSL-1306-5R6M 5.6 0.022 12 5.3 SSL-1306-100M 10 0.032 10 4.3 SSL-1306-150M 15 0.036 8.0 4.0 SSL-1306-220M 22 0.047 7.0 3.5 SSL-1306-330M 33 0.066 5.5 3.0 SSL-1306-470M 47 0.089 4.5 2.6 SSL-1306-680M 68 0.130 3.5 2.3 SSL-1306-101M 100 0.190 3.0 1.8 SSL-1306-151M 150 0.250 2.6 1.5 SSL-1306-221M 220 0.380 2.4 1.2 SSL-1306-331M 330 0.560 1.9 1.0 SSL-1306-471M 470 0.850 1.4 0.82 SSL-1306-681M 680 1.200 1.2 0.72 SSL-1306-102M 1000 1.800 1.0 0.56 # Operating Temperature range -40ºC to +85º - 6 -

Dimensions of Taping: Series W P A0 B0 K0 T Quantity 7 Reel 13 Reel SSL - 0402 12 8 4.8 6.9 3.0 0.25 750 2000 SSL - 0802 24 12 9.7 13.25 3.3 0.3 1000 SSL - 0804 24 12 9.7 13.25 5.4 0.3 500 SSL - 0810 24 12 9.7 13.25 11.7 0.3 225 SSL - 1306 32 20 15.4 18.8 8 0.4 250-7 -

Reliability Test (Environmental Performances): No. Item Specification Test Condition 1. Temperature Cycle Appearance No damage One Cycle Impedance within ±20% Step Temperate Time (min) Of the initial value 1-55 C 30 2 25 C 3 3 125 C 30 4 25 C 3 Total 100 Cycles Measured after exposure in room condition = 24hrs 2 Humidity Temperature: +40 C ± 2 C Resistance Humidity: 90% to 95% Time 1000 ± 12 Hours Measured after exposure in room condition = 24hrs 3 High Temperature Temperature = 125 C ± 3 C Resistance Relative Humidity = 0% Applied Current = Rated Current as state Time = 1000 hrs ± 12 hrs Measure after exposure in room Condition = 24hrs 4. Temperature 10 cycles (air to Air) (1 cycles shall consist of) Shock 30 minutes exposure to -55 C 30 minutes exposure to 125 C 15 seconds maximum transition between temperatures Measure after exposure in room Condition = 24hrs - 8 -

Reliability Test (Mechanical Performances): No. Item Specification Test Condition 1. Solderability More than 90% of the terminal Pre heat = 150 C Electrode shall be coved with fresh solder Pre heat Time = 1 minute Solder = Sn/Ag3.0/Cu0.5 ( Free) Solder Temperature = 245 C ± 5 C Immersion Time = 4 ± 1 Sec 2. Resistance to The chips shall not crack. Pre Heat = 150 C Soldering Heat More than 75% of the terminal Pre heat Time = 1 minute Electrode Shall be cover with Solder = Sn/Ag3.0/Cu0.5 ( Free) solder Solder Temperature = 260 C ± 5 C Immersion Time = 10 ± 1 Sec 3. Vibration Test Device shall be soldered on the substrate Oscillation Freq.= 10 to 55 to 10Hz for 1 min Amplitude = 1.5mm Time = 2hrs for each axis (X,Y&Z) total 6 hrs - 9 -