Features. = +25 C, Vs= +8V to +16V

Similar documents
Features. = +25 C, +Vdc = +6V, -Vdc = -5V

Features. = +25 C, +Vdc = +6V, -Vdc = -5V

Features. = +25 C, Vdc = +5V

Features. Gain Variation Over Temperature db/ C

Features. = +25 C, Vdc = +7V

Features. Parameter Min. Typ. Max. Units. Frequency Range 8 12 GHz Insertion Loss* db. Input Return Loss* 10 db

Features. The HMC-C072 is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT. = +25 C, Vdc = +7V

Features DC DC DC - 14 DC Min Attenuation Attenuation > 5 db Min Attenuation Attenuation > 10 db

Features. DC - 18 GHz. Switching Transients DC - 18 GHz 12 mvpp

HMC659LC5 LINEAR & POWER AMPLIFIERS - SMT. GaAs PHEMT MMIC POWER AMPLIFIER, DC - 15 GHz. Features. Typical Applications. General Description

Features. = +25 C, Vdd 1, 2, 3 = +3V

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Features. = +25 C, Vdd= 8V, Idd= 75 ma*

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Features. = +25 C, Vdd= 5V, Vgg2= Open, Idd= 60 ma*

Features. = +25 C, Vdd = 5V

Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 70 ma

Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 45 ma

Features = +5V. = +25 C, Vdd 1. = Vdd 2

Features. Gain: 17 db. OIP3: 25 dbm. = +25 C, Vdd 1, 2 = +3V

Features. = +25 C, Vdc = +12V

HMC618ALP3E AMPLIFIERS - LOW NOISE - SMT. GaAs SMT phemt LOW NOISE AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram

Features OBSOLETE. Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) dbm Supply Current (Idd) ma

Features. = +25 C, Vdd = +5V, Idd = 400mA [1]

HMC486LP5 / 486LP5E LINEAR & POWER AMPLIFIERS - SMT. SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7-9 GHz. Typical Applications.

Features. = +25 C, Vdd= 8V, Vgg2= 3V, Idd= 290 ma [1]

Features. = +25 C, Vdd = +4V, Idd = 90 ma [2]

Features. = +25 C, Vdd1, 2, 3 = 5V, Idd = 250 ma*

Features. Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat) dbm

Features = +5V. = +25 C, Vdd 1. = Vdd 2

Features. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz

OBSOLETE HMC5846LS6 AMPLIFIERS - LINEAR & POWER - SMT. Electrical Specifications, T A. Features. Typical Applications. General Description

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Features. = +25 C, Vdd= +3V. Parameter Min. Typ. Max. Units Frequency Range GHz Gain db

HMC1040LP3CE. Amplifiers - Low Noise - smt. GaAs phemt MMIC LOW NOISE AMPLIFIER, GHz. Features. Typical Applications. General Description

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Features. = +25 C, Vdd = +5V, Idd = 63 ma

SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER,

Features OBSOLETE. = +25 C, as a function of Vdd. Vdd = +3V Vdd = +5V Vdd = +5V Vdd = +5V Parameter

Features. = +25 C, Vdd = +5V, Rbias = 10 Ohms*

HMC5805ALS6 AMPLIFIERS - LINEAR & POWER - SMT. Typical Applications. Features. Functional Diagram

HMC639ST89 / 639ST89E

Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]

Features. Gain: 15.5 db. = +25 C, Vdd = 5V

HMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram

Features. = +25 C, Vdd 1, 2, 3, 4 = +3V

HMC694LP4 / 694LP4E. Variable gain amplifiers - ANALOG - smt. GaAs MMIC ANALOG VARIABLE GAIN AMPLIFIER, 6-17 GHz. Typical Applications

HMC998. Amplifiers - Linear & Power - Chip. GaAs phemt MMIC 2 WATT POWER AMPLIFIER, GHz. Electrical Specifications, T A.

Features. = +25 C, Vdd = +10 V, Idd = 350 ma

Features. Gain: 12 db. 50 Ohm I/O s

Features. = +25 C, Vdd = +3V

Features. = +25 C, Vdd = +7V, Idd = 1340 ma [1]

HMC397 DRIVER & GAIN BLOCK AMPLIFIERS - CHIP. InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 10 GHz. Features. Typical Applications. General Description

Features. = +25 C, Vcc =5V, Vpd = 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max Units

Features. = +25 C, Vdd = 5V, Idd = 85 ma*

Features. = +25 C, Vdd= +12V, Vgg2= +5V, Idd= 400 ma*

Features. = +25 C, 50 Ohm System, Vcc = 5V. Parameter Conditions Min. Typ. Max. Units. Maximum Input Frequency GHz

Features. = +25 C, With 0/-5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units

v02.06 Insertion Loss INSERTION LOSS () C +85 C -40 C Isolation ISOLATION () Return Loss RETURN LOSS ()

Features. = +25 C, With 0/+5V Control, 50 Ohm System

Parameter Min. Typ. Max. Units Frequency Range GHz

Features. = +25 C, Vdd1, Vdd2 = +5V

Features. = +25 C, Vdd 1, 2, 3 = +3V

Gain Control Range db

Features OBSOLETE. = +25 C, Rbias = 0 Ohm. Bypass Mode Failsafe Mode Parameter

Features. = +25 C, Vdd = +15V, Vgg2 = +9.5V [1], Idq = 500 ma [2]

HMC465 AMPLIFIERS- DRIVERS & GAIN BLOCKS - CHIP. GaAs phemt MMIC MODULATOR DRIVER AMPLIFIER, DC - 20 GHz. Electrical Specifications, T A.

HMC368LP4 / 368LP4E FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9-16 GHz OUTPUT. Typical Applications.

FMAM4032 DATA SHEET. 10 MHz to 6 GHz, Medium Power Broadband Amplifier with 900 mw, 24 db Gain and SMA. Features: Applications:

TEL: FAX: v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER, GHz Broadband Gain & Return Vdd =

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Features. = +25 C, Vdd = 5V, Idd = 200 ma*

Features. = +25 C, Vdd= 5V, Idd= 60 ma*

Features. = +25 C, Vdd 1, 2, 3 = +3V

Customised Pack Sizes / Qtys. Support for all industry recognised supply formats: o o o. Waffle Pack Gel Pak Tape & Reel

Features. = +25 C, Vdd = 5V, Vgg1 = Vgg2 = Open

Features. = +25 C, Vdd =+28V, Idd = 850 ma [1]

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Features. = +25 C, Vdd 1, 2, 3 = +3V

Features OBSOLETE. DC GHz GHz GHz GHz GHz

Features

Features. = +25 C, Vdd 1, 2, 3 = +3V

Features. Gain: 14.5 db. Electrical Specifications [1] [2] = +25 C, Rbias = 825 Ohms for Vdd = 5V, Rbias = 5.76k Ohms for Vdd = 3V

Features. = +25 C, Vdd = +6V, Idd = 375mA [1]

HMC639ST89 / 639ST89E

HMC471MS8G / 471MS8GE. Features OBSOLETE. DC GHz GHz GHz GHz GHz

Features. = +25 C, Vcc = 5V, Vpd = 5V. Parameter Min. Typ. Max. Min. Typ. Max. Units

Features. = +25 C, With 0/-5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units

Features OUT E S T CODE. = +25 C, Vdd= 8V, Idd= 60 ma*

HMC599ST89 / 599ST89E. Features. The HMC599ST89(E) is ideal for: = +25 C MHz. Gain Variation Over Temperature MHz 0.

Features. Parameter Min Typ. Max Min Typ. Max Min Typ Max Units Frequency Range GHz Gain

Features. Noise Figure db Supply Current (Idd) ma Supply Voltage (Vdd) V

Features. Parameter* Min. Typ. Max. Units Frequency Range GHz Gain 2 5 db. Gain Variation over Temperature

Features. = +25 C, Vdd = +5V, 5 dbm Drive Level

Features dbm

HMC480ST89 / 480ST89E

Features OBSOLETE. Output Third Order Intercept (IP3) [2] dbm Total Supply Current ma

HMC320MS8G / 320MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V

HMC994A AMPLIFIERS - LINEAR & POWER - CHIP. GaAs phemt MMIC 0.5 WATT POWER AMPLIFIER, DC - 30 GHz. Features. Typical Applications

Transcription:

v2.17 Typical Applications The Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Features Electrical Specifications, T A = +25 C, Vs= +8V to +V Noise Figure: 2.75 db Gain: 18 db P1dB Output Power: +14 dbm 5 Ohm Matched Input/Output Regulated Supply: Vs = +8V to +V Hermetically Sealed Module Field Replaceable 2.2 mm Connectors -55 to +85 C Operating Temperature General Description The is a GaAs MMIC PHEMT Low Noise Amplifi er in a miniature, hermetic module which operates between 17 and 27 GHz. This high dynamic range amplifi er module provides 18 db of gain, 2.75 db noise fi gure and up to +25 dbm of output IP3 while the internal voltage regulator accepts a supply voltage from +8V to +V. The wideband amplifi er I/Os are internally matched to 5 Ohms and are internally DC blocked for robust performance. The module features removable coaxial connectors which can be detached to allow direct connection of the I/O pins to a microstrip or coplanar circuit. Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 17-22 22-27 GHz Gain 1 14.5 17.5 db Gain Variation Over Temperature.15.25.15.25 db/ C Noise Figure 2.75 3.25 3. 4. db Input Return Loss 14 14 db Output Return Loss 1 13 db Output Power for 1 db Compression (P1dB) 1.5 13.5 15 dbm Saturated Output Power (Psat) 18 18.5 dbm Output Third Order Intercept (IP3) 24 26 dbm Supply Current 6 6 ma - 44 One Technology Way, P.O. Box, Norwood, MA 262- Phone: 781-32-47 Order online at www.analog.com 2 Alpha Road Chelmsford, MA 1824 Phone: 78-25-3343 Fax: 78-25-3373 Application Support: Phone: 1-8-ANALOG-D

v2.17 Gain & Return Loss RESPONSE (db) 25 2 15 1 5-5 -1-15 S21 S11 S22-2 14 3 Input Return Loss vs. Temperature RETURN LOSS (db) -5-1 -15 Reverse Isolation vs. Temperature -2 Gain vs. Temperature GAIN (db) Output Return Loss vs. Temperature RETURN LOSS (db) 22 2 18 14 1-5 -1-15 -2-25 -3 17 1 21 23 25 27 2 Noise Figure vs. Temperature 6 ISOLATION (db) -1-2 -3-4 NOISE FIGURE (db) 5 4 3 2-5 1-6 One Technology Way, P.O. Box, Norwood, MA 262- Phone: 781-32-47 Order online at www.analog.com 2 Alpha Road Chelmsford, MA 1824 Phone: 78-25-3343 Fax: 78-25-3373 Application Support: Phone: 1-8-ANALOG-D - 45

v2.17 P1dB vs. Temperature Psat vs. Temperature P1dB (dbm) Output IP3 vs. Temperature IP3 (dbm) 24 2 8 4 32 28 24 2 8 Absolute Maximum Ratings Psat (dbm) 24 2 8 4 Power Compression @ 21 GHz Pout (dbm), GAIN (db), PAE (%) 22 18 14 1 6 2-2 Pout Gain PAE -6-24 -2 - - -8-4 4 INPUT POWER (dbm) Bias Supply Voltage (Vs) -.3 Vdc to +25 Vdc RF Input Power (RFIN) +1 dbm Storage Temperature -65 to +15 C Operating Temperature -55 to +85 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS - 46 One Technology Way, P.O. Box, Norwood, MA 262- Phone: 781-32-47 Order online at www.analog.com 2 Alpha Road Chelmsford, MA 1824 Phone: 78-25-3343 Fax: 78-25-3373 Application Support: Phone: 1-8-ANALOG-D

v2.17 Pin Descriptions Pin Number Function Description Interface Schematic 1 RFIN & RF Ground RF input connector, coaxial female, fi eld replaceable. This pin is AC coupled and matched to 5 Ohms. 2 Vs Power supply voltage for the amplifi er. 3 RFOUT & RF Ground RF output connector, coaxial female, fi eld replaceable. This pin is AC coupled and matched to 5 Ohms. 4 GND Power supply ground. One Technology Way, P.O. Box, Norwood, MA 262- Phone: 781-32-47 Order online at www.analog.com 2 Alpha Road Chelmsford, MA 1824 Phone: 78-25-3343 Fax: 78-25-3373 Application Support: Phone: 1-8-ANALOG-D - 47

v2.17 Outline Drawing Package Information Package Type C-1 Package Weight [1] 1.2 gms [2] Spacer Weight N/A [1] Includes the connectors [2] ±1 gms Tolerance NOTES: 1. PACKAGE, LEADS, COVER MATERIAL: KOVAR 2. SPACER MATERIAL: ALUMINUM 3. PLATING: ELECTROLYTIC GOLD 5 MICROINCHES MIN., OVER ELECTROLYTIC NICKEL 75 MICROINCHES MIN. 4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES ±.5 [.13] UNLESS OTHERWISE SPECIFIED. 6. FIELD REPLACEABLE 2.2mm CONNECTORS. TENSOLITE 231CCSF OR EQUIVALENT. 7. TO MOUNT MODULE TO SYSTEM PLATFORM REPLACE -8 HARDWARE WITH DESIRED MOUNTING SCREWS. - 48 One Technology Way, P.O. Box, Norwood, MA 262- Phone: 781-32-47 Order online at www.analog.com 2 Alpha Road Chelmsford, MA 1824 Phone: 78-25-3343 Fax: 78-25-3373 Application Support: Phone: 1-8-ANALOG-D

v2.17 Notes: One Technology Way, P.O. Box, Norwood, MA 262- Phone: 781-32-47 Order online at www.analog.com 2 Alpha Road Chelmsford, MA 1824 Phone: 78-25-3343 Fax: 78-25-3373 Application Support: Phone: 1-8-ANALOG-D - 4

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: