Standard Recovery Diodes, (Stud ersion), 40 A S- FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-5 (DO-203AB) PRIMARY CHARACTERISTICS I F(A) 40 A Package DO-5 (DO-203AB) Circuit configuration Single Types up to 1600 RRM Designed and qualified for multiple level Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS Battery charges Converters Power supplies Machine tool controls Welding MAJOR RATINGS AND CHARACTERISTICS 40HF(R) PARAMETER TEST CONDITIONS UNITS TO 120 140/160 40 40 A I F(A) T C 140 1 C I F(RMS) 62 62 A 50 Hz 570 570 I FSM A 60 Hz 595 595 I 2 t 50 Hz 1600 1600 60 Hz 1450 1450 A 2 s RRM Range 0 to 1200 1400 to 1600 T J -65 to 190-65 to 160 C ELECTRICAL SPECIFICATIONS OLTAGE RATINGS TYPE NUMBER S-40HF(R) OLTAGE CODE RRM, MAXIMUM REPETITIE PEAK REERSE OLTAGE RSM, MAXIMUM NON-REPETITIE PEAK REERSE OLTAGE 0 200 20 200 300 40 400 500 60 600 700 80 800 900 0 00 10 120 1200 1300 140 1400 0 160 1600 1700 I RRM MAXIMUM AT T J = T J MAXIMUM ma 9 4.5 Revision: 07-Sep-17 1 Document Number: 93513 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?900
S- FORWARD CONDUCTION PARAMETER SYMBOL TEST CONDITIONS 40HF(R) TO 120 140/160 UNITS Maximum average forward current 40 40 A I at case temperature F(A) 180 conduction, half sine wave 140 1 C Maximum RMS forward current I F(RMS) 62 A t = ms No voltage 570 Maximum peak, one-cycle forward, t = 8.3 ms reapplied 595 I non-repetitive surge current FSM t = ms 0 % RRM 480 A t = 8.3 ms reapplied Sinusoidal half wave, 500 t = ms No voltage initial T J = T J maximum 1600 Maximum I 2 t for fusing I 2 t t = 8.3 ms reapplied 1450 t = ms 0 % RRM 1 A 2 s t = 8.3 ms reapplied 50 Maximum I 2 t for fusing I 2 t t = 0.1 ms to ms, no voltage reapplied 16 000 A 2 s alue of threshold voltage (up to 1200 ) F(TO) 0.65 T J = T J maximum alue of threshold voltage (for 1400 /1600 ) F(TO) 0.76 alue of forward slope resistance r (up to 1200 ) f 4.29 T J = T J maximum alue of forward slope resistance r (for 1400 /1600 ) f 3.8 m Maximum forward voltage drop FM I pk = 125 A, T J = 25 C, t p = 400 μs rectangular wave 1.30 1.50 THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS Maximum junction operating and storage temperature range Maximum thermal resistance, junction to case Maximum thermal resistance, case to heatsink Maximum allowable mounting torque (+0 %, - %) Notes (1) Recommended for pass-through holes (2) Recommended for holed threaded heatsinks 40HF(R) to 120 140 to 160 T J, T Stg -65 to 190-65 to 160 C R thjc DC operation 0.95 R thcs Mounting surface, smooth, flat and greased 0.25 Not lubricated thread, tighting on nut (1) 3.4 (30) Lubricated thread, tighting on nut (1) 2.3 (20) Not lubricated thread, tighting on hexagon (2) 4.2 (37) Lubricated thread, tighting on hexagon (2) 3.2 (28) Approximate weight 17 g 0.6 oz. Case style See dimensions - link at the end of datasheet DO-5 (DO-203AB) UNITS K/W N m (lbf in) R thjc CONDUCTION CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION TEST CONDITIONS UNITS 180 0.14 0. 120 0.16 0.17 0.21 0.22 60 0.30 0.31 30 0.50 0.50 T J = T J maximum Note The table above shows the increment of thermal resistance R thjc when devices operate at different conduction angles than DC Revision: 07-Sep-17 2 Document Number: 93513 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?900 K/W
S- Maximum Allowable Case Temperature ( C) 190 (0 to 1200 ) 180 170 Conduction Angle 160 30 140 60 90 130 0 5 15 20 25 30 35 40 45 Maximum Allowable Case Temperature ( C) 160 (1400, 1600 ) 140 Conduction Angle 130 120 30 1 60 90 0 0 5 15 20 25 30 35 40 45 Fig. 1 - Current Ratings Characteristics Fig. 3 - Current Ratings Characteristics Maximum Allowable Case Temperature ( C) 190 180 170 160 140 130 120 (0 to 1200 ) Conduction Period 30 60 90 DC 0 20 30 40 50 60 70 Maximum Allowable Case Temperature ( C) 160 (1400, 1600 ) 140 Conduction Period 130 120 1 30 60 0 90 DC 80 0 20 30 40 50 60 70 Fig. 2 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Maximum Average Forward Power Loss (W) 60 50 40 30 20 60 30 RMS Limit Conduction Angle (0 to 1200 ) Tj = 190 C 0 0 5 15 20 25 30 35 40 3 K/W 5 K/W 7 K/W 2 K/W K/W 1.5 K/W Maximum Allowable Ambient Temperature ( C) Fig. 5 - Forward Power Loss Characteristics RthSA = 1 K/W - Delta R 40 80 120 160 200 Revision: 07-Sep-17 3 Document Number: 93513 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?900
S- Maximum Average Forward Power Loss (W) 60 50 40 30 20 DC 60 30 RMS Limit Conduction Period (0 to 1200 ) Tj = 190 C 0 0 20 30 40 50 60 70 3 K/W 5 K/W 7 K/W 2 K/W K/W 1.5 K/W Maximum Allowable Ambient Temperature ( C) Fig. 6 - Forward Power Loss Characteristics RthSA = 1 K/W - Delta R 40 80 120 160 200 Maximum Average Forward Power Loss (W) 50 45 40 35 30 25 20 15 60 30 RMS Limit Conduction Angle 5 (1400, 1600 ) Tj = 160 C 0 0 20 30 40 3 K/W 5 K/W 7 K/W K/W 2 K/W 1.5 K/W Maximum Allowable Ambient Temperature ( C) Fig. 7 - Forward Power Loss Characteristics RthSA = 1 K/W - Delta R 25 50 75 0 125 175 200 Maximum Average Forward Power Loss (W) 70 60 50 40 30 20 DC 60 30 RMS Limit Conduction Period (1400, 1600 ) Tj = 160 C 0 0 20 30 40 50 60 70 1.5 K/W 2 K/W 3 K/W 5 K/W 7 K/W K/W R thsa = 1 K/W - Delta R Maximum Allowable Ambient Temperature ( C) Fig. 8 - Forward Power Loss Characteristics 40 80 120 160 Revision: 07-Sep-17 4 Document Number: 93513 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?900
S- Peak Half Sine Wave Forward Current (A) 550 500 450 400 350 300 250 200 0 At Any Rated Load Condition And With Rated rrm Applied Following Surge. Initial Tj = Tj Max. @ 60 Hz 0.0083 s @ 50 Hz 0.00 s 1 0 Number Of Equal Amplitude Half Cycle Current Pulses (N) Instantaneous Forward Current (A) 00 0 T J = 25 C T J = T J Max. up to 1200 1 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Instantaneous Forward oltage () Fig. 9 - Maximum Non-Repetitive Surge Current Fig. 11 - Forward oltage Drop Characteristics (Up To 1200 ) Peak Half Sine Wave Forward Current (A) 600 550 500 450 400 350 300 250 200 Maximum Non Repetitive Surge Current ersus Pulse Train Duration. Initial Tj = Tj Max. No oltage Reapplied Rated rrm Reapplied 0 0.01 0.1 1 Pulse Train Duration (s) Instantaneous Forward Current (A) 00 0 T J = T J Max. T J = 25 C 40HF (R) Series 1 0 0.5 1 1.5 2 2.5 3 3.5 4 Instantaneous Forward oltage () Fig. - Maximum Non-Repetitive Surge Current Fig. 12 - Forward oltage Drop Characteristics (For 1400 /1600 ) Z thjc - Transient Thermal Impedance (K/W) 1 0.1 Steady State alue (DC Operation) 40HF(R).. Series 0.01 0.0001 0.001 0.01 0.1 1 Square Wave Pulse Duration (s) Fig. 13 - Thermal Impedance Z thjc Characteristics Revision: 07-Sep-17 5 Document Number: 93513 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?900
S- ORDERING INFORMATION TABLE Device code S- 40 HF R 160 M 1 2 3 4 5 6 1 - product 2-40 = standard device 41 = not isolated lead 42 = isolated lead with silicone sleeve (red = reverse polarity) (blue = normal polarity) 3 - HF = standard diode 4 - None = stud normal polarity (cathode to stud) R = stud reverse polarity (anode to stud) 5 - oltage code x = RRM (see oltage Ratings table) 6 - None = stud base DO-5 (DO-203AB) 1/4" 28UNF-2A M = stud base DO-5 (DO-203AB) M6 x 1 Dimensions LINKS TO RELATED DOCUMENTS www.vishay.com/doc?95344 Revision: 07-Sep-17 6 Document Number: 93513 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?900
Outline Dimensions DO-203AB (DO-5) for 40HF(R) and 41HF(R) Series DIMENSIONS FOR 40HF(R) SERIES in millimeters (inches) Ø 14.6 (0.57) 6.1/7 (0.24/0.27) 4 (0.16) 4 (0.16) MIN. 25.4 (1) MAX..8 (0.42) 11.4 (0.45) 11.1 ± 0.4 (0.44 ± 0.02) 1/4" 28UNF-2A for metric devices: M6 x 1 1.20 (0.04) 17.40 (0.68) Document Number: 95344 For technical questions, contact: indmodules@vishay.com www.vishay.com Revision: 29-Sep-08 1
Outline Dimensions DO-203AB (DO-5) for 40HF(R) and 41HF(R) Series DIMENSIONS FOR 41HF(R) SERIES in millimeters (inches) 11 (0.43) MAX. Ø 6.3 (0.25) MAX. 118.5 (4.67) MAX. 7 (4.21) MAX. www.vishay.com For technical questions, contact: indmodules@vishay.com Document Number: 95344 2 Revision: 29-Sep-08
Legal Disclaimer Notice ishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. ishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. ishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, ishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on ishay s knowledge of typical requirements that are often placed on ishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify ishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, ishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the ishay product could result in personal injury or death. Customers using or selling ishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized ishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of ishay. Product names and markings noted herein may be trademarks of their respective owners. 2017 ISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERED Revision: 08-Feb-17 1 Document Number: 900