TOP-SERVIS FHU S.C. ul. Czereśniowa 60 21-007 Mełgiew-Krępiec biuro@top-servis.eu tel: +48 81 721 67 89 fax: +48 81 723 41 02 SALES DEPARTMENT: +48 530 740 260 +48 535 434 441 +48 509 970 974
UNIVERSAL POLYESTER PUTTY UNI putty is two-components putty used for filling hollows and unevenness in the different surface. It is produced by the vacuum method, on the basis of high quality polyester resins and special components, thanks to which the product acquires required properties. It is characterized by fine-grained consistency and quite good elasticity. UNIVERSAL POLYESTER PUTTY 0,25 kg BLU000055 33 PCS 0,5 kg PRO000026 18 PCS 1,0 kg PRO000027 6 PCS 1,8 kg BLU037 6 PCS 4,5 kg PRO000037 2 PCS ALUMINUM POLYESTER PUTTY ALUMINUM POLYESTER PUTTY 0,25 kg PRO000048 33 PCS 0,5 kg PRO000020 18 PCS 1,0 kg PRO000023 6 PCS 1,5 kg PRO000027 6 PCS
POLYESTER FINISHING PUTTY POLYESTER FINISHING PUTTY 0,25 kg BLU000089 18 PCS 0,5 kg BLU000090 18 PCS 1,0 kg PRO000040 6 PCS 1,8 kg BLU039 6 PCS SUPER FINISH POLYESTER PUTTY SUPER FINISH PUTTY 1,4kg BLU000119 6 PCS
POLYESTER PUTTY WITH GLASSFIBER POLYESTER PUTTY WITH GLASSFIBER 0,25 kg BLU000076 18 PCS 0,5 kg BLU000077 18 PCS 1,0 kg BLU000079 6 PCS 1,7 kg BLU040 6 PCS 4,5 kg BLU000080 2 PCS LIGHTWEIGHT POLYESTER PUTTY LIGHTWEIGHT POLYESTER FILLER PUTTY 1,0 L BLU000091 6 SZT
GRAPHITE POLYESTER PUTTY Graphite colour two-components putty used for filling hollows and unevenness in the different surface. It is produced by the vacuum method, on the basis of high quality polyester resins and special components, thanks to which the product acquires required properties. It is characterized by fine-grained consistency and quite good elasticity. GRAPHITE POLYESTER PUTTY 1,8 kg BLU000117 6 PCS SOFT POLYESTER PUTTY Soft putty is two-components putty used for filling hollows and unevenness in the different surface. It is produced by the vacuum method, on the basis of high quality polyester resins and special components, thanks to which the product acquires required properties. It is characterized by fine-grained consistency and quite good elasticity. SOFT POLYESTER PUTTY 0,5 kg 000366 18 PCS 1,8 kg PRO000039 6 PCS 4,5 kg PRO000031 2 PCS
TOTAL PRIMER Black primer for the adhesive to the glass, which after application forms on the glass hard and impenetrable layer for UV and for light. The use of this product allows for faster and more stable adhesion of the adhesive to the glass. TOTAL PRIMER 10 ml BLU000142 15 PCS ACRYL FILLER ACRYL FILLER Capacity Colour Code Qty. in package 1L BLACK BLU033 6 PCS 1L GREY BLU036 6 PCS 1L GRAPHITE BLU035 6 PCS 1L WHITE BLU033 6 PCS 1L BEIGE BLU031 6 PCS 1L RED BLU034 6 PCS 3L WHITE BLU000112 6 PCS 3L GREY BLU000109 6 PCS 3L GRAPHITE BLU000110 6 PCS 3L BLACK BLU000111 6 PCS
WASH PRIMER Two-component reactive anti-corrosive primer based on polyvinyl resins, with very high anti-corrosion properties. It provides excellent adhesion to various substrates. It is designed for applying thin layers included with any protective primers. It can be used for steel, galvanized steel and aluminum. WASH PRIMER 1L EUR003 6 PCS ADHESION INCREASING AGENT One-component primer resulting in the increase of adhesion primers, coatings of acrylic and polyurethane to various substrates, particularly plastics (including polypropylene and mixtures thereof). For application with a spray gun. ADHESION INCREASING AGENT 0,5L BLU000122 6 PCS
CLEAR COAT MS + HARDENER High-quality, two-component colorless acrylic lacquer works perfectly with all paints available on the market. Extremely resistant to scratches, atmospheric agents and UV radiation. It has very good flow, dries quickly, no tendency to drip. The dried and cured coating is characterized by high durability, color depth and excellent gloss. CLEAR COAT MS + HARDENER 1L BLU028 6 SZT. 5L BLU029 4 SZT. CLEAR COAT HS + HARDENER High-quality, two-component colorless acrylic lacquer works perfectly with all paints available on the market. Extremely resistant to scratches, atmospheric agents and UV radiation. It has very good flow, dries quickly, no tendency to drip. The dried and cured coating is characterized by high durability, color depth and excellent gloss. CLEAR COAT HS + HARDENER 0,5L + 0,25L BLU000043 6 PCS 1,0L + 0,5L BLU000042 6 PCS MATTING PASTE Matting paste is added to paints and varnishes in order to reduce the degree of gloss paint finish. Its use does not impair the fluidity of paint, does not change the structure of the immune coat of paint on the weather conditions, mechanical and physicochemical properties. MATTING PASTE 1L BLU000081 6 PCS
UNIVERSAL HARDENER High-quality, multi-purpose hardener, compatible with other paints on the market. It is appropriately selected composition of solvents and isocyanate resin, prepared for the harden Acrylic and polyurethane products. It is characterized by high gloss, excellent flow and resistance to weather conditions. UNIVERSAL HARDENER 0,5L BLU041 12 PCS 1,0L BLU042 6 PCS 5,0L BLU043 4 PCS FAST HARDENER A high quality product for professional repair car body, has a very short drying time. This ensures a high quality harden combined with excellent gloss and appearance. FAST HARDENER 0,5L 000341 12 PCS 1L BLU101 6 PCS
METAL BASE AND ACRYLIC PAINTS SOLVENT universal solvent is a mixture of suitable organic solvents. The product is intended for dilution with acrylic paints, metal bases and primers to achieve the desired density before application to the body panel painted. UNIVERSAL SOLVENT 0,5 L BLU000051 11 PCS 1,0 L BLU000049 6 PCS 5,0 L BLU000053 1 PCS AB380 BASE SOLVENT Ab380 BASE SOLVENT is characterized by ease of application and accurate color matching. - This fast-drying basecoat quality covers with a thin layer (10-20 μ), gives smooth surfaces with perfect flake control in metallics aluminum. For best results we recommend to use hardener. It can be used for spot, panel and overall repair. Suitable for multi-colored stripes and artistic effects. AB380 BASE SOLVENT 1L POL000033 6 PCS
R-DY SOLVENT Universal solvent, designed for cleaning and degreasing of existing coatings, can be used with all types of primers, clearcoats and topcoats. It is designed for small and medium repair damage done at a temperature from 20 C to 30 C. R-DY SOLVENT 0,5 L 000364 11 PCS 1L 000363 6 PCS SILICON REMOVER Product perfect to remove any greasy stains, dirt and to dissolve synthetic resins. SILICON REMOVER 1L BLU000050 6 PCS 5L BLU000054 4 PCS
ANTISILICONE ADDITIVE It prevents the formation of silicone craters, which may arise as a result of surface contamination with silicone or grease. Used for: colorless acrylic paints, acrylic paints. Antisilicone additive to be used depending on the soil in an amount of from 2% to 4% of the finished paint mixture with the hardener. Colour: colorless. ANTISILICONE ADDITIVE 0,5 L BLU000121 11 PCS FADE OUT THINNER (SOLVENT) Special thinner for eliminating optical color differences at the contact point and the paintwork newly imposed acrylic varnish. Used for (the imposition of) color and acrylic paints, clear coats. Thinner shading is applied thinly in 1-2 passes in the joints of old paint coating and the newly applied paint. There are two methods of work: I method (recommended): Thinner for shading applied thinly immediately after application and the newly imposed clearcoat or enamel. Second method: Thinner for shading applied thinly immediately after application zakończaniu last layer of clear varnish or enamel. Colour: Colourless. ROZCIEŃCZALNIK DO CIENIOWANIA 0,5 L PRO000211 11 PCS ACRYL ACCELERATOR The product reduces the time of the drying and curing of two-component polyurethane and acrylic. It is advisable to use it primarily at low temperatures and high humidity. Accelerator for acrylic products can be applied to primers, clearcoats, enamels. The maximum amount of the accelerator may not exceed 1.5%! Do not use the fast hardener! Increasing the addition of the accelerator more than the recommended amount does not accelerate, and excess might cause paint defects such as loss of gloss, loss of adhesion or orange peel. Drying the paint with the addition of accelerator at elevated temperatures may cause fogging. Add it just before application. Colour: colourless. ACRYL ACCELERATOR 0,5 L PRO000212 11 PCS
AUTO SEAL Sealant for brush, designed to protect places of welded. Weight is the product of one component. Curing occurs through evaporation of the solvents. After drying, the coating is characterized by high flexibility and good adhesion to the substrate. It does not drip and leaves no figure. It can be painted with any acrylic lacquers. AUTO SEAL 1 KG BLU030 12 PCS ONE-COMPONENT POLYURETHANE ADHESIVE SEALANT Used for making tight junctions between metal sheets, gutters, light surrounds, sunroof and other car body parts. Can be painted with all the lacquer systems. Available in grey, black and white colours. ADHESIVE SEALANT Capacity Code Colour Qty. in package 310ml BLU000095 WHITE 12 PCS 310ml BLU000094 BLACK 12 PCS 310ml BLU000093 GREY 12 PCS FAST ADHESIVE FOR A CAR WINDOWS One-component polyurethane adhesive mass of very fast hardening thanks to humidity in the air. Used to fit windscreens. It can be used in cars equipped with with air-bag systems. After one hour from application the car is ready for use. It can be used in cars equipped with air-bag systems. FAST ADHESIVE FOR A CAR WINDOWS 310 ML BLU000092 25 PCS
POLYESTER RESIN + HARDENER Product which combined with a mat or fibre glass is used to fill significant loss of material in car bodies, boats, trailers, etc. and also to strengthen and stiffen the constructions of the elements under repair. Very good adherence to metal, plastic surfaces, steel, glass and concrete. Resistant to temperature up to 80 C has elasticity and short hardening time. After hardening it has big mechanical strength and can be covered with any polyester putty. POLYESTER RESIN + HARDENER 1L BLU000061 6 PCS 5L PRO000069 4 PCS POLYESTER RESIN REPAIR KIT Used to fill significant pits in car bodies, boats, trailers, etc. and to strengthen and stiffen the construction of the elements under repair. POLYESTER RESIN REPAIR KIT 250 G BLU000047 20 PCS
RESIN BASE AB150 for mixing the base metallic and non metallic and the connection of individual pigments. The binder used for the preparation of basecoat system C600. It has no chemical security and is therefore compatible with all mixers available in our market. RESIN BASE AB150 5L POL002 4 PCS RESIN BASE AK100 Automotive grade acrylic adhesive used in the preparation of clear coat twocomponent solid and metallic system C500 AK100 Capacity Code Qty. in pacage 5L PRO000065 4 PCS
BLACHOGUM Effective protection of the body on the brush creates a strong and flexible coating that protects the chassis of the car in front of stone chip and mechanical impact. Protects against corrosion, petrol, oil, water and salt. It has sound-absorbing properties and soundproofing. Applied to a surface manually using a brush. BLACHOGUM 1L IRY005 6 PCS 3L IRY006 4 PCS 5L IRY007 4 PCS BUMPER PAINT One component structural paint intended for bumpers, moldings and parts of mirrors made of plastic. It is characterized by short drying time and a very good adhesion to typical plastics. Easy to use, it allows you to achieve the desired effect delicate structure, concealing minor defects in the substrate. The paint has very good resistance to both mechanical and weather conditions. It can serve as a final coating, without further painting. BUMPER PAINT 0,25 L BLU000045 6 PCS 0,5 L BLU000100 6 PCS 1,0 L BLU000099 6 PCS
ANTI-GRAVEL Product on the base of synthetic resins, protecting against mechanical factors. It can be applied with all the varnish systems. Available in three colours: black, grey and white. ANTI-GRAVEL Capacity Code Colour Qty. in package 1 kg BLU027 WHITE 12 PCS 1 kg BLU023 GREY 12 PCS 1 kg BLU025 BLACK 12 PCS 1,8 kg BLU026 WHITE 6 PCS 1,8 kg BLU022 GREY 6 PCS 1,8 kg BLU024 BLACK 6 PCS ANTI-GRAVEL SPRAY 500ML Product on the base of synthetic resins, protecting against mechanical factors. It can be applied with all the varnish systems. Available in three colours: black, grey and white. ANTI-GRAVEL SPRAY 500ML Code Colour Qty. in package 000004 WHITE 12 PCS 000003 BLACK 12 PCS 000002 GREY 12 PCS LAKIER AKRYLOWY SPRAY 500ML They provide the ability to perform minor repairs and restoration paint coating to people who do not have a compressor and a pressure gun. Lacquer is part of the series of high-quality, fast-drying acrylic paints in the form of a spray. They have very good adhesion and high resistance to weather conditions. ACRYLIC LACQUER SPRAY 500ML Code Colour Qty. in package 000018 SILVER 12 PCS 000008 GREY PRIMER 12 PCS 000006 MATT BLACK 12 PCS 000005 BLACK GLOSS 12 PCS 000007 COLOURLESS 12 PCS 16
MEGA LACK SPRAY 400ML Quick-drying, high-performance, high hiding power. For use on all common surfaces such as metal, wood, glass and suitable for painting plastic. Usage: Before spraying painted surface, remove rust, cleaned of dust and grease. The paint is well mixed by shaking the container about 3 minutes. LAKIERY MEGA LACK SPRAY 400ML Code Colour Qty.in package 10180 COLOURLESS 190 12 PCS 10188 WHITE 40 12 PCS 10181 BLACK MATT 4 12 PCS 10182 BLACK GLOSS 39 12 PCS 10193 DARK RED 23 12 PCS 10189 RED LIGHT 131 12 PCS 10183 ORANGE 6 12 PCS 10198 FLASH SILVER 1580 12 PCS 10194 BLUE 21 12 PCS 10196 SILVER 100 12 PCS 10184 SILVER 36 12 PCS 10201 BLACK HEAT-RESISTANT 1200 12 PCS 10207 SILVER HEAT-RESISTANT 1300 12 PCS 10186 GREEN DARK 13 12 PCS 10187 GREEN LIGHT 308 12 PCS 10195 GOLD 35 12 PCS 10191 YELLOW 41 12 PCS 10206 GREY PRIMER 12 PCS 10111 PAINT ELIMINATION 12 PCS PRE-FILL STANDARD SPRAY 400ML Can filled with an ecological gas. After adding paint of a suitable shade the spray is ready for use. Nearly every type of lacquer can be used. It dilutes acrylic based lacquers very well as well as alkyd and cellulose lacquers. Available with female valve. PRE-FILL STANDARD SPRAY 400ML Code Qty. in package 000024 12 PCS 17
KOSMETYKI Witaj w świecie profesjonalistów. Welcome to the world of professionals. POLISHING PASTE 120G POLISHING PASTE 120G Code Qty. in package BLU000064 UNIVERSAL 50 PCS BLU000102 FINISH WAX 50 PCS BLU000103 HEAVY DUTY 50 PCS BLU000104 MEDIUM DUTY 50 PCS MULTI-PURPOSE FOAM CLEANER 650ML In the car to clean the plastic components, chrome, textiles, rugs, carpets and upholstery vinyl and velor - home cleaning carpets, upholstery furniture, terracotta and glazes, porcelain, bathroom fixtures and more. Penetrates deeply into the cleaned surfaces restoring the original color and appearance. MULTI-PURPOSE FOAM CLEANER 650ML Code Qty. in package 66016 12 PCS PASTE/GEL FOR HAND WASH Paste and gel are used for cleaning heavily soiled hands. Effectively remove grease, oil, grease, soot, etc. Just apply a small amount, rub thoroughly and wash with warm water. The ingredients protect the skin from drying out and irritation. Code BLU000120 Code BLU000118 GEL 500ML PASTE 500G Qty. in package 1 PCS Qty. in package 1 PCS 18
TOP-SERVIS FHU S.C. ul. Czereśniowa 60 21-007 Mełgiew-Krępiec POLAND biuro@top-servis.eu tel: +48 81 721 67 89 fax: +48 81 723 41 02 SALES DEPARTMENT: +48 530 740 260 +48 535 434 441 +48 509 970 974