Compliance with RoHS Directive FEATURES. 2, V breakdown between contact and coil The body block construction of the coil that is sealed at formation offers a high breakdown of 2, V between contact and coil, and, V between open contacts. 2. Outstanding surge resistance. Surge breakdown between open contacts:, V 6µ sec. (FCC part 68) Surge breakdown between contact and coil: 2, V 2 µ sec. (Bellcore) ORDERING INFORMATION New pin layout (LT type) added. Best seller with broad lineup and AC 2 V breakdown. 3. : High sensitivity of 4mW By using the highly efficient polar magnetic circuit seesaw balance mechanism, a nominal operating of 4 mw (minimum operating of 79 mw) has been achieved. 4. High contact capacity: 2 A 3 V DC. Compact size.(l) (W) 8.2(H) (L) (W) (H) 6. The use of gold-clad twin crossbar contacts ensures high contact reliability. *We also offer a range of products with AgPd contacts suitable for use in low level load analog circuits ( V DC ma). *SX relays designed for low level loads are also available. 7. Outstanding vibration and shock resistance. Functional shock resistance: 7 m/s 2 Destructive shock resistance:, m/s 2 Functional vibration resistance: to Hz (at double amplitude of 3.3 mm.3 inch) RELAYS TESTING Destructive vibration resistance: to Hz (at double amplitude of mm.97 inch) 8. Sealed construction allows automatic washing. 9. A range of surface-mount types is also available SA: Low-profile surface-mount terminal type SL: High connection reliability surfacemount terminal type SS: Space saving surface-mount terminal type TYPICAL APPLICATIONS. Communications (xdsl, Transmission) 2. Measurement 3. Security 4. Home appliances, and audio/visual equipment. Automotive equipment 6. Medical equipment 2: 2 Form C Surface-mount availability Nil: Standard PC board terminal type or self-clinching terminal type SA: SA type SL: SL type SS: SS type Operating function Nil: Single side stable L: coil latching L2: 2 coil latching LT: 2 coil latching Terminal shape Nil: Standard PC board terminal or surface-mount terminal H: Self-clinching terminal (DC)*., 3, 4.,, 6, 9, 2, 24, 48V material Nil: Standard contact (AgAu clad) : AgPd contact (low level load); AgPdAu clad (stationary), AgPd (movable) Packing style Nil: Tube packing X: Tape and reel (picked from /3/4/-pin side) Z: Tape and reel packing (picked from the 8/9//2-pin side) Notes:. *48 V coil type: Single side stable only 2. In case of V transistor drive circuit, it is recommended to use 4. V type relay. 2
TYPES. Standard PC board terminal 2 Form C Single side stable coil latching 2 coil latching (L2) 2 coil latching (LT).V DC 2-.V 2-L-.V 2-L2-.V 2-LT-.V 3V DC 2-3V 2-L-3V 2-L2-3V 2-LT-3V 4.V DC 2-4.V 2-L-4.V 2-L2-4.V 2-LT-4.V V DC 2-V 2-L-V 2-L2-V 2-LT-V 6V DC 2-6V 2-L-6V 2-L2-6V 2-LT-6V 9V DC 2-9V 2-L-9V 2-L2-9V 2-LT-9V 2V DC 2-2V 2-L-2V 2-L2-2V 2-LT-2V 24V DC 2-24V 2-L-24V 2-L2-24V 2-LT-24V 48V DC 2-48V Standard packing: Tube: 4 pcs.; Case:, pcs. Note: Please add - to the end of the part number for AgPd contacts (low level load). 2. self-clinching terminal Single side stable coil latching 2 coil latching (L2) 2 coil latching (LT).V DC 2-H-.V 2-L-H-.V 2-L2-H-.V 2-LT-H-.V 3V DC 2-H-3V 2-L-H-3V 2-L2-H-3V 2-LT-H-3V 4.V DC 2-H-4.V 2-L-H-4.V 2-L2-H-4.V 2-LT-H-4.V V DC 2-H-V 2-L-H-V 2-L2-H-V 2-LT-H-V 2 Fom C 6V DC 2-H-6V 2-L-H-6V 2-L2-H-6V 2-LT-H-6V 9V DC 2-H-9V 2-L-H-9V 2-L2-H-9V 2-LT-H-9V 2V DC 2-H-2V 2-L-H-2V 2-L2-H-2V 2-LT-H-2V 24V DC 2-H-24V 2-L-H-24V 2-L2-H-24V 2-LT-H-24V 48V DC 2-H-48V Standard packing: Tube: 4 pcs.; Case:, pcs. Note: Please add - to the end of the part number for AgPd contacts (low level load). 3. Surface-mount terminal ) Tube packing 2c Single side stable coil latching 2 coil latching (L2) 2 coil latching (LT).V DC 2S -.V 2S -L-.V 2S -L2-.V 2S -LT-.V 3V DC 2S -3V 2S -L-3V 2S -L2-3V 2S -LT-3V 4.V DC 2S -4.V 2S -L-4.V 2S -L2-4.V 2S -LT-4.V V DC 2S -V 2S -L-V 2S -L2-V 2S -LT-V 6V DC 2S -6V 2S -L-6V 2S -L2-6V 2S -LT-6V 9V DC 2S -9V 2S -L-9V 2S -L2-9V 2S -LT-9V 2V DC 2S -2V 2S -L-2V 2S -L2-2V 2S -LT-2V 24V DC 2S -24V 2S -L-24V 2S -L2-24V 2S -LT-24V 48V DC 2S -48V : For each surface-mounted terminal identification, input the following letter. SA type: A, SL type: L, SS type: S Standard packing: Tube: 4 pcs.; Case:, pcs. Note: Please add - to the end of the part number for AgPd contacts (low level load). 2) Tape and reel packing Single side stable coil latching 2 coil latching (L2) 2 coil latching (LT).V DC 2S -.V-Z 2S -L-.V-Z 2S -L2-.V-Z 2S -LT-.V-Z 3V DC 2S -3V-Z 2S -L-3V-Z 2S -L2-3V-Z 2S -LT-3V-Z 4.V DC 2S -4.V-Z 2S -L-4.V-Z 2S -L2-4.V-Z 2S -LT-4.V-Z V DC 2S -V-Z 2S -L-V-Z 2S -L2-V-Z 2S -LT-V-Z 2 Form C 6V DC 2S -6V-Z 2S -L-6V-Z 2S -L2-6V-Z 2S -LT-6V-Z 9V DC 2S -9V-Z 2S -L-9V-Z 2S -L2-9V-Z 2S -LT-9V-Z 2V DC 2S -2V-Z 2S -L-2V-Z 2S -L2-2V-Z 2S -LT-2V-Z 24V DC 2S -24V-Z 2S -L-24V-Z 2S -L2-24V-Z 2S -LT-24V-Z 48V DC 2S -48V-Z Standard packing: Tape and reel: pcs.; Case:, pcs. Notes:. Tape and reel packing symbol -Z is not marked on the relay. X type tape and reel packing (picked from /2/3/4-pin side) is also available. 2. Please add - to the end of the part number for AgPd contacts (low level load).
RATING. Coil data ) Single side stable.v DC 2) coil latching Pick-up (at 2 C 68 F) 3) 2 coil latching (L2, LT) *Pulse drive (JIS C 442-986) Drop-out (at 2 C 68 F) current [±%] (at 2 C 68 F) 93.8mA Coil resistance [±%] (at 2 C 68 F) 3V DC 46.7mA 64.3Ω 4.V DC 3mA 4Ω V DC 28.mA 78Ω 6V DC 7%V or less of %V or more of nominal * nominal * 23.3mA 27Ω 9V DC (Initial) (Initial).mA 79Ω 2V DC.7mA,28Ω 24V DC.8mA 4,4Ω 6Ω 4mW 48V DC.6mA 8,33Ω 27mW.V DC Set (at 2 C 68 F) Reset (at 2 C 68 F) current [±%] (at 2 C 68 F) Coil resistance [±%] (at 2 C 68 F) 66.7mA 22.Ω 3V DC 33.3mA 9Ω 4.V DC 22.2mA 22.Ω V DC 7%V or less of 7%V or less of 2mA 2Ω nominal * nominal * 6V DC (Initial) (Initial) 6.7mA 36Ω 9V DC.mA 8Ω 2V DC 8.3mA,44Ω 24V DC 4.2mA,76Ω.V DC Set (at 2 C 68 F) Reset (at 2 C 68 F) current [±%] (at 2 C 68 F) Coil resistance [±%] (at 2 C 68 F) mw Set coil Reset coil Set coil Reset coil Set coil Reset coil 33.9mA 33.9mA.2Ω.2Ω 3V DC 66.7mA 66.7mA 4Ω 4Ω 4.V DC 44.mA 44.mA.2Ω.2Ω V DC 7%V or less of 7%V or less of 4mA 4mA 2Ω 2Ω nominal * nominal * 6V DC (Initial) (Initial) 33.3mA 33.3mA 8Ω 8Ω 9V DC 22.2mA 22.2mA 4Ω 4Ω 2V DC 6.7mA 6.7mA 72Ω 72Ω 24V DC 8.3mA 8.3mA 2,88Ω 2,88Ω 2mW 2mW applied (at 2 C 68 F) %V of nominal 2%V of nominal applied (at 2 C 68 F) %V of nominal applied (at 2 C 68 F %V of nominal
2. Specifications Characteristics Item Specifications Arrangement 2 Form C Initial contact resistance, max. mω (By drop 6 V DC A) Standard contact: AgAu clad, material AgPd contact (low level load): AgPdAu clad (stationary), AgPd (movable) Nominal switching capacity Standard contact: 2 A 3 V DC, AgPd contact: A 3 V DC (resistive load) switching Standard contact: 6 W (DC), AgPd contact: 3 W (DC) (resistive load) switching 22V DC Rating switching current Standard contact: 2 A, AgPd contact: A switching capacity (Reference value)* µa mv DC Single side stable 4 mw (. to 24 V DC), 27 mw (48 V DC) coil latching mw (. to 24 V DC) 2 coil latching 2 mw (. to 24 V DC) Insulation resistance (Initial),MΩ (at V DC) Measurement at same location as Initial breakdown section. Between open contacts, Vrms for min. (Detection current: ma) Breakdown Between contact and coil 2, Vrms for min. (Detection current: ma) (Initial) Between contact sets, Vrms for min. (Detection current: ma) Electrical Surge breakdown Between open contacts, V ( 6µs) (FCC Part 68) characteristics (Initial) Between contacts and coil 2, V (2 µs) (Telcordia) Temperature rise (at 2 C 68 F) C (By resistive method, nominal coil applied to the coil; contact carrying current:.) Operate time [Set time] (at 2 C 68 F) 4 ms [ 4 ms] ( applied to the coil, excluding contact bounce time.) Release time [Reset time] (at 2 C 68 F) 4 ms [ 4 ms] ( applied to the coil, excluding contact bounce time.) (without diode) Functional 7 m/s Shock resistance (Half-wave pulse of sine wave: 6 ms; detection time: µs.) Mechanical Destructive, m/s 2 (Half-wave pulse of sine wave: 6 ms.) characteristics Functional to Hz at double amplitude of 3.3 mm (Detection time: µs.) Vibration resistance Destructive to Hz at double amplitude of mm Expected life Mechanical 8 (at 8 cpm) Electrical (2 A 3 V DC resistive), ( A 3 V DC resistive) (at 2 cpm) Ambient temperature: 4 C to 8 C (up to 24 V coil) 4 F to 8 F (up to 24 V coil) Conditions Conditions for operation, transport and storage* 2 [4 C to 7 C (48 V coil) 4 F to 8 F (48 V coil)]; Humidity: to 8% R.H. (Not freezing and condensing at low temperature) operating speed (at rated load) 2 cpm Unit weight Approx. 2 g.7 oz Notes: * This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (AgPd contact type is available for low level load switching [V DC, ma max. level]) *2 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT. REFERENCE DATA. Maximum switching capacity 2. Life curve 3. Mechanical life Tested sample: 2-V, pcs. Operating speed: 8 cpm 3. 9 Switching current, A 2....4.3.2 DC resistive load 2 3 2 3, V 4. Electrical life ( 3V DC resistive load) Tested sample: 2-V, 6 pcs. Operating speed: 2 cpm Change of pick-up and drop-out Ratio against the rated, %V 9 8 7 6 4 3 2 Pick-up Drop-out 2 3 4 6 7 8 9 No. of operations, 4 No. of operations 4 3 2 3V DC resistive load. 2. Switching current, A Change of contact resistance resistance, mω 9 8 7 6 4 3 2 2 3 4 6 7 8 9 No. of operations, 4 Ratio against the rated, %V 8 7 6 4 3 2 Pick-up Drop-out,, No. of operations, 4 -(). Coil temperature rise Tested sample: 2-V, 6 pcs. Point measured: Inside the coil Ambient temperature: 2 C 77 F, 8 C 8 F Temperature rise, C 7 6 4 3 2 A A 2 3 4 Coil applied, % 2 C 77 F 8 C 8 F
-(2). Coil temperature rise Tested sample: 2-48V, 6 pcs. Point measured: Inside the coil Ambient temperature: 2 C 77 F, 7 C 8 F Temperature rise, C 7 6 4 3 2 2 C 77 F 7 C 8 F A A 6-(). Operate and release time (with diode) Tested sample: 2-V, pcs. Operate and release time, ms 4 3 2 Operate time Release time 6-(2). Operate and release time (without diode) Tested sample: 2-V, pcs. Operate and release time, ms 4 3 2 Operate time Release time 2 3 4 Coil applied, % 7 8 9 2 Coil applied, %V 7 8 9 2 Coil applied, %V 7. Ambient temperature characteristics Tested sample: 2-V, pcs. 8-(). High frequency characteristics (Isolation) Tested sample: 2-2V, 2 pcs. 8-(2). High frequency characteristics (Insertion loss) Tested sample: 2-2V, 2 pcs. Rate of change, % 4 2 4 2 2 4 6 8 Ambient temperature, C 2 Drop-out x x Pick-up Isolation, db Insertion loss, db..8.6.4 4.2 9 Malfunctional shock (single side stable) Tested sample: 2-V, 6 pcs., Frequency, MHz -(). Influence of adjacent mounting Tested sample: 2-2V, 6 pcs., Frequency, MHz -(2). Influence of adjacent mounting Tested sample: 2-2V, 6 pcs. Z' Y Y' X m/s 2 m/s 2 Z' Z X X' Y m/s 2 m/s 2 Y' Deenergized condition Energized condition Z m/s 2 m/s 2 X' Rate of change, % Rate of change, % ON ON Pick-up ON Drop-out 2 4 6 8.79.7.236.3.394 Inter-relay distance, Rate of change, % Rate of change, % ON Pick-up ON ON Drop-out 2 4 6 8.79.7.236.3.394 Inter-relay distance,. Pulse dialing test Tested sample: 2-V, 6 pcs. (3 ma 48 V DC wire spring relay load) Change of pick-up and drop-out Change of contact resistance Circuit.8 µf 48V DC 48 Ω 48 Ω.8 µf Wire spring relay 4 3 Ratio against the rated, %V 9 8 7 6 4 3 2 Pick-up Drop-out resistance, mω 9 8 7 6 4 3 2 2 3 4 No. of operation, 4 2 3 4 No. of operations, 4 Note: Data of surface-mount type are the same as those of PC board terminal type.
DIMENSIONS () The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac. Standard PC board terminal and Self clinching terminal CAD Data Single side stable and coil latching type External dimensions Standard PC board terminal 2 coil latching type (L2, LT) External dimensions Standard PC board terminal...6.26 8.2.6.26 8.2..2..4. 3..38 Self clinching terminal.2...2..4. 3..38 Self clinching terminal.2....6.26 8.2.6.26 8.2 PC board pattern (Bottom view)..2..4. 3..38 Schematic (Bottom view) Single side stable coil latching.2. General tolerance: ±.3 ±.2 PC board pattern (Bottom view)..2..4. (.) (.4)3..38.2. General tolerance: ±.3 ±.2 Schematic (Bottom view) 2 coil latching (L2) 2 coil latching (LT).6.4. 8-. dia. 8-.39 dia. 3 4 2 9 8 3 4 2 9 8 2.7.. -. dia. -.39 dia. 3 4 6 2 9 8 7 3 4 6 2 9 8 7 Tolerance: ±. ±.4 (Deenergized condition) Tolerance: ±. ±.4 2. Surface-mount terminal CAD Data Type External dimensions (General tolerance: ±.3 ±.2) Suggested mounting pad (Top view) (Tolerance: ±. ±.4) Single side stable and coil latching type 2 coil latching type (L2, LT) Single side stable and coil latching type 2 coil latching type (L2, LT) SA type..2.6.26. 8.2 8.4.33 9.4±..37±.2.2...2.6.26. 8.2 8.4.33 3.6.39.24 9.4±..37±.2.2.. 3.6.39.24. SL type..2 8.2.394.2.6..26 9.4±...37±.2..2 8.2.394.2.6..26 9.4±...37±.2 3.6.39.24. 3.6.39.24. SS type..2.6.26. 8.2.394 ±. ±.2.2...2.6.26. 8.2.394 ±. ±.2.2. 2.6.39.8. 6.24.246 2.6.8.39. 6.24.246 Schematic (Top view) Single side stable coil latching 2 coil latching (L2) 2 coil latching (LT) 2 9 8 3 4 2 9 8 3 4 2 9 8 7 3 4 6 2 9 8 7 3 4 6 (Deenergized condition)
NOTES. Packing style ) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below. Stopper (gray) 2) Tape and reel packing (surface-mount terminal type) () Tape dimensions (i) SA type (ii) SL type Orientation (indicates PIN No.) stripe Relays 6..63 Tape coming out direction D..394 Stopper (green).. dia. Relay polarity bar.4.9 (Z type) 2. 4..7 dia..4.79.7.69.6 C A B..43..6 Relay polarity bar (Z type) 24. ±.3 ±.2 ±.2.94 9.2.362±.8.. dia..4.9 dia. 2. 4..7.4.79.7.69.6 2. Automatic insertion To maintain the internal function of the relay, the chucking pressure should not exceed the values below. Chucking pressure in the direction A: 4.9 N {gf} or less Chucking pressure in the direction B: 9.8 N { kgf} or less Chucking pressure in the direction C: 9.8 N { kgf} or less A Please chuck the portion. Avoid chucking the center of the relay. In addition, excessive chucking pressure to the pinpoint of the relay should be avoided. For general cautions for use, please refer to the Cautions for use of Signal Relays or General Application Guidelines. C B (iii) SS type 6. Relays.63..394 Tape coming out direction..43..6 24. ±.3.94 ±.2 ±.2.8.42±.8 Relay polarity bar (Z type).. dia..4.9 dia. 2. 4..7.4.79.7.69.6 6. Relays.63 Tape coming out direction..43..6 8..3 24. ±.3.94 ±.2 ±.2.8 ±.8.42 (2) Dimensions of plastic reel 3 dia..2 dia. 2..79 2 dia..827 dia. 38 dia. 4.96 dia. 8 dia. 3. dia.