v5.94 HMC66LPE DETECTOR, 8 - GHz Typical Applications The HMC66LPE is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement Functional Diagram Features Wide Input Bandwidth: 8 to GHz Wide Dynamic Range: >54 db up to 8 GHz Single Positive Supply: +.V Excellent Stability Over Temperature Fast Rise/Fall Time: 5ns / ns 6 Lead xmm SMT Package: 9mm² General Description The HMC66LPE Logarithmic Detector converts RF signals at its input, to a proportional DC voltage at its output. The HMC66LPE employs successive compression topology which delivers high dynamic range over a wide input frequency range. As the input power is increased, successive amplifiers move into saturation one by one creating an approximation of the logarithm function. The output of a series of detectors is summed, converted into the voltage domain and buffered to drive the LOG OUT output. The HMC66LPE provides a nominal logarithmic slope of + mv/db and an intercept of -7 dbm at 8 GHz. as a log detector for high volume microwave radio and VSAT applications, the HMC66LPE is housed in a compact x mm RoHS compliant SMT plastic package. Electrical Specifications, T A = +5 C Vcc = Vcc = +.V Parameter Typ. Typ. Typ. Typ. Typ. Units Input Frequency [] 4 8 8 GHz ± db Dynamic Range 59 6 6 64 54 db ± db Dynamic Range Center - -4-4 -5-7 dbm Log Error Over Temperature (-4 to +85) ± ± ± ± ± db Output Intercept - -5-7 - - dbm Output Slope 4.6.7.. 4 mv/db [] Video output load should be K Ohm or higher. For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 84Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 96, Norwood, MA 6-96 Phone: 978-5-4 Fax: 978-5-7 Order On-line at www.hittite.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: 78-9-47 Order online at www.analog.com Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: 978-5-4 Application or apps@hittite.com Support: Phone: -8-ANALOG-D
HMC66* PRODUCT PAGE QUICK LINKS Last Content Update: //7 COMPARABLE PARTS View a parametric search of comparable parts. EVALUATION KITS HMC66LPE Evaluation Board DOCUMENTATION Data Sheet HMC66 Data Sheet REFERENCE MATERIALS Quality Documentation Package/Assembly Qualification Test Report: 6L xmm QFN Package (QTR: REV: ) Package/Assembly Qualification Test Report: LP, LPC, LP, LPB, LPC, LPD, LPF, LPG (QTR: 4-64) DESIGN RESOURCES HMC66 Material Declaration PCN-PDN Information Quality And Reliability Symbols and Footprints DISCUSSIONS View all HMC66 EngineerZone Discussions. SAMPLE AND BUY Visit the product page to see pricing options. TECHNICAL SUPPORT Submit a technical question or find your regional support number. DOCUMENT FEEDBACK Submit feedback for this data sheet. This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
v5.94 HMC66LPE DETECTOR, 8 - GHz Electrical Specifications, (continued) Parameter Conditions Min. Typ. Max. Units LOGOUT Interface Output Voltage Range.9.8 V Output Rise Time [] / Fall Time [] f = GHz 5 / ns Power Down (EN) Interface Voltage Range for Normal Mode.8 x Vcc Vcc V Voltage Range for Powerdown Mode. x Vcc V Power Supply (Vcc, Vcc) Operating Voltage Range.5..45 V Supply Current in Normal Mode 88 ma Supply Current in Power Down Mode ma [] dbm Input Pulsed; measured from % to 9% [] dbm Input Pulsed; measured from 9% to % vs. Input Power, Fin = 8 GHz.5 ERR +5C ERR -4C - vs. Input Power, Fin = GHz.5 ERR +5C ERR -4C -.5 Log Out +5C Log Out -4C -6-5 -4 - - - - -.5 Log Out +5C Log Out -4C -6-5 -4 - - - - - vs. Input Power, Fin = 4 GHz vs. Input Power, Fin = 8 GHz ERR +5C ERR -4C ERR +5C ERR -4C.5 -.5 -.5 Log Out +5C Log Out -4C -6-5 -4 - - - - -.5 Log Out +5C Log Out -4C -6-5 -4 - - - - - Unless otherwise noted: Vcc, Vcc = +.V, T A = +5 C For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 84Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 96, Norwood, MA 6-96 Phone: 978-5-4 Fax: 978-5-7 Order On-line at www.hittite.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: 78-9-47 Order online at www.analog.com Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: 978-5-4 Application or apps@hittite.com Support: Phone: -8-ANALOG-D
v5.94 HMC66LPE DETECTOR, 8 - GHz vs. Input Power, Fin = GHz vs. Input Power, Fin = GHz.5.5 ERR +5C ERR -4C Log Out +5C Log Out -4C -6-5 -4 - - - vs. Input Power, Fin = 4 GHz..8.4 ERR +5C ERR -4C - - - 8 4.5.5 ERR +5C ERR -4C Log Out +5C Log Out -4C -6-5 -4 - - - vs. Input Power, Fin = 8 GHz..8.4 Log Out +5C Log Out -4C - - - 8 4.6 Log Out +5C Log Out -4C -6-5 -4 - - - -4-8.6 ERR +5C ERR -4C -6-5 -4 - - - -4-8..8 vs. Input Power, Fin = GHz Log Out +5C Log Out -4C 8 4.4 ERR +5C ERR -4C -4.6-8 -6-5 -4 - - - Unless otherwise noted: Vcc, Vcc = +.V, T A = +5 C For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 84Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 96, Norwood, MA 6-96 Phone: 978-5-4 Fax: 978-5-7 Order On-line at www.hittite.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: 78-9-47 Order online at www.analog.com Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: 978-5-4 Application or apps@hittite.com Support: Phone: -8-ANALOG-D
v5.94 HMC66LPE DETECTOR, 8 - GHz Fall Time @ GHz @ dbm.8 Rise Time @ GHz @ dbm.8.6.4..8 4 6 8 TIME (ns) Input Return Loss RETURN LOSS (db) -5 - -5 - -5 +5C +85C -4C.6.4..8 4 6 8 TIME (ns) LOG OUT vs. Frequency.7.4. GHz 4 GHz 8 GHz 4 GHz 8 GHz GHz - 4 FREQUENCY (GHz).8-6 -5-4 - - - Unless otherwise noted: Vcc, Vcc = +.V, T A = +5 C For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 84Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 96, Norwood, MA 6-96 Phone: 978-5-4 Fax: 978-5-7 Order On-line at www.hittite.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: 78-9-47 Order online at www.analog.com Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: 978-5-4 Application or apps@hittite.com Support: Phone: -8-ANALOG-D 4
v5.94 HMC66LPE DETECTOR, 8 - GHz Absolute Maximum Ratings EN +.6V Vcc. Vcc +.6V RF Input Power + dbm Junction Temperature 5 C Continuous Pdiss (T = 85 C) (Derate.6 mw/ C above 85 C).5W Thermal Resistance (R th ) (junction to ground paddle) 5.9 C/W Storage Temperature -65 to +5 C Operating Temperature -4 to +85 C ESD Sensitivity (HBM) Class Outline Drawing ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS NOTES:. LEADFRAME MATERIAL: COPPER ALLOY. DIMENSIONS ARE IN INCHES [MILLIMETERS].. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE.5mm MAXIMUM. PAD BURR HEIGHT SHALL BE.5mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED.5mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HMC APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [] [] 66 HMC66LPE RoHS-compliant Low Stress Injection Molded Plastic % matte Sn MSL XXX [] 4-Digit lot number XXXX [] Max peak reflow temperature of 6 C 5 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 84Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 96, Norwood, MA 6-96 Phone: 978-5-4 Fax: 978-5-7 Order On-line at www.hittite.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: 78-9-47 Order online at www.analog.com Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: 978-5-4 Application or apps@hittite.com Support: Phone: -8-ANALOG-D
v5.94 HMC66LPE DETECTOR, 8 - GHz Pin Descriptions Pin Number Function Description Interface Schematic, 4, 5, 8, 9 N/C No connection necessary. These pins may be connected to RF/DC ground without affecting performance. RFIN RF input pin. AC GND 6, 7 GND, LOG FB, LOG OUT External capacitor to ground is required. See application circuit. These pins and the exposed package bottom must be connected to a high quality RF/DC ground. Log out and feedback. These pins should be shorted to each other (see application circuit). Log out load should be at least K Ohm or higher. EN Enable pin connected to Vcc or Vcc for normal operation. Total supply current reduced to less than ma when EN is set to V. Vcc Bias Supply. Connect supply voltage to this pin with appropriate filtering. To ensure proper start-up supply rise time should be faster than usec For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 84Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 96, Norwood, MA 6-96 Phone: 978-5-4 Fax: 978-5-7 Order On-line at www.hittite.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: 78-9-47 Order online at www.analog.com Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: 978-5-4 Application or apps@hittite.com Support: Phone: -8-ANALOG-D 6
v5.94 HMC66LPE DETECTOR, 8 - GHz Pin Descriptions (Continued) Pin Number Function Description Interface Schematic 4-6 Vcc Bias Supply. Connect supply voltage to these pins with appropriate filtering. To ensure proper start-up supply rise time should be faster than usec Application & Evaluation PCB Schematic Note: C and C should be placed as close to the package as possible. Note: Log out load should be K Ohm or higher. 7 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 84Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 96, Norwood, MA 6-96 Phone: 978-5-4 Fax: 978-5-7 Order On-line at www.hittite.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: 78-9-47 Order online at www.analog.com Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: 978-5-4 Application or apps@hittite.com Support: Phone: -8-ANALOG-D
v5.94 HMC66LPE DETECTOR, 8 - GHz Evaluation PCB List of Materials for Evaluation PCB 4 [] Item J J J - J5 Description K-Type Connector SMA Connector DC Pin C, C pf Capacitor, Pkg. C, C4 nf Capacitor, 4 Pkg. C5 C6 R 47 pf Capacitor, 4 Pkg. 4.7 µf Tantalum Capacitor, CASE A Pkg. Ω Resistor, Pkg. R, R4 Ω Resistor, 4 Pkg. U PCB [] HMC66LPE Log Detector 4 Evaluation PCB [] Reference this number when ordering complete evaluation PCB [] Circuit Board Material: Rogers 45 or Arlon 5 FR The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 5 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 84Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 96, Norwood, MA 6-96 Phone: 978-5-4 Fax: 978-5-7 Order On-line at www.hittite.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: 78-9-47 Order online at www.analog.com Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: 978-5-4 Application or apps@hittite.com Support: Phone: -8-ANALOG-D 8
Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: 4-HMC66LPE