C4D212H Silicon Carbide Schottky Diode Z-Rec Rectifier Features 1.2kV Schottky Rectifier Zero Reverse Recovery Current High-Frequency Operation Temperature-Independent Switching Extremely Fast Switching Positive Temperature Coefficient on V F Increased Creepage/Clearance Distance Benefits Replace Bipolar with Unipolar Rectifiers Essentially No Switching Losses Higher Efficiency Reduction of Heat Sink Requirements Parallel Devices Without Thermal Runaway Package TO-247-2 PIN 1 PIN 2 RM = 12 V ( =135 C) = 26 Q c = 99 nc CSE pplications Switch Mode Power Supplies (SMPS) Boost diodes in PFC or DC/DC stages Free Wheeling Diodes in Inverter stages C/DC converters Part Number Package Marking C4D212H TO-247-2 C4D212 Maximum Ratings (=25 C unless otherwise specified) Symbol Parameter Value Unit Test Conditions Note RM Repetitive Peak Reverse Voltage 12 V SM Surge Peak Reverse Voltage 13 V DC Peak Reverse Voltage 12 V Continuous Forward Current 54 26 2 =25 C =135 C =156 C Fig. 3 RM Repetitive Peak Forward Surge Current 86 56 =1 ms, Half Sine Pulse =11 C, t P =1 ms, Half Sine Pulse SM Non-Repetitive Forward Surge Current 13 14 =1 ms, Half Sine Pulse =11 C, t P =1 ms, Half Sine Pulse Fig. 8,Max Non-Repetitive Peak Forward Current 115 95 =1 ms, Pulse =11 C, t P =1 ms, Pulse Fig. 8 P tot Power Dissipation 246 16.5 W =25 C =11 C Fig. 4 dv/dt Diode dv/dt ruggedness 2 V/ns =-96V i 2 dt i 2 t value 84.5 54 2 s =1 ms =11 C, t P =1 ms, T stg Operating Junction and Storage Temperature -55 to +175 C TO-247 Mounting Torque 1 8.8 Nm lbf-in M3 Screw 6-32 Screw 1 C4D212H Rev. -, 2-218
Electrical Characteristics Symbol Parameter Typ. Max. Unit Test Conditions Note V F I R Forward Voltage Reverse Current 1.5 2.2 35 65 1.8 3 2 4 Q C Total Capacitive Charge 99 nc C Total Capacitance 15 93 67 V μ pf = 2 =25 C = 2 = 12 V =25 C = 12 V = 8 V, = 2 di/dt = 2 /μs = V,, f = 1 MHz = 4 V, = 25 C, f = 1 MHz = 8 V, = 25 C, f = 1 MHz Fig. 1 Fig. 2 Fig. 5 Fig. 6 E C Capacitance Stored Energy 28 μj = 8 V Fig. 7 Note: This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol Parameter Typ. Unit Note R θjc Thermal Resistance from Junction to Case.61 C/W Fig. 9 Typical Performance 4 1 35 3 =-55 C = 75 C =125 C.9.8.7 25.6 () 2 15 I R (m).5.4 1 5.3.2.1 =-55 C = 75 C =125 C 1 2 3 4 V F 5 1 15 Figure 1. Forward Characteristics Figure 2. Reverse Characteristics 2 C4D212H Rev. -, 2-218
Typical Performance 18 28 16 24 (peak) () 14 12 1 8 1% Duty 2% Duty 3% Duty 5% Duty 7% Duty DC P Tot (W) 2 16 12 6 8 4 2 4 25 5 75 1 125 15 175 25 5 75 1 125 15 175 C C Figure 3. Current Derating Figure 4. Power Derating 14 16 12 14 1 12 Q c (nc) 8 6 C (pf) 1 8 6 4 4 2 2 2 4 6 8 1 12.1 1 1 1 1 Figure 5. Recovery Charge vs. Reverse Voltage Figure 6. Capacitance vs. Reverse Voltage 3 C4D212H Rev. -, 2-218
Typical Performance 5. 1 45. 4. E C Capacitive Energy (uj) E C (mj) 35. 3. 25. 2. 15. I IFSM() FSM () 1 1 _initial _initial = 11 C 1. 5. 5. 2 4 6 8 1 Reverse Voltage Figure 7. Typical Capacitance Stored Energy 1 1E-5 1.E-5 1E-4 1.E-4 1E-3 1.E-3 1E-2 1.E-2 tp(s) t p (s) Figure 8. Non-Repetitive Peak Forward Surge Current versus Pulse Duration (sinusoidal waveform) Junction Thermal To Case Resistance Impedance, ( C/W) Z thjc ( o C/W) 1 1E-3 1E-3.5.3.1.5.2.1 SinglePulse 1E-3 1E-6 1E-6 1E-6 1E-3 1E-3 1E-3 1 Time, T (Sec) t p (s) Figure 9. Transient Thermal Impedance 4 C4D212H Rev. -, 2-218
Package Dimensions Package TO-247-2 Inches Millimeters POS Min Max Min Max.19.25 4.7 5.31 1.87.12 2.21 2.59 2.59.98 1.5 2.49 b.39.55.99 1.4 b2.65.94 1.65 2.39 c.15.35.38.89 D.819.845 2.8 21.46 D1.515-13.8 - D2.2.53.51 1.35 E.62.64 15.49 16.26 E1.53-13.46 - E2.135.157 3.43 3.99 e.214 5.44 ØK.1.25 L.78.8 19.81 2.32 L1 -.177-4.5 ØP.14.144 3.56 3.66 ØP1.278.291 7.6 7.39 Q.212.244 5.38 6.2 S.243 6.17 W -.6 -.15 PIN 1 PIN 2 CSE Recommended Solder Pad Layout all units are in inches.4 Part Number Package Marking C4D212H TO-247-2 C4D212 TO-247-2 Note: Recommended soldering profiles can be found in the applications note here: http://www.wolfspeed.com/power_app_notes/soldering 5 C4D212H Rev. -, 2-218
Diode Model V ft = V T +If*R T V T =.97+( * -1.4*1-3 ) R T =.23+( * 2.71*1-4 ) Note: T j = Diode Junction Temperature In Degrees Celsius, valid from 25 C to 175 C V T R T Notes RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 211/65/EC (RoHS2), as implemented January 2, 213. RoHS Declarations for this product can be obtained from your Wolfspeed representative or from the Product Ecology section of our website at http:// www.wolfspeed.com/power/tools-and-support/product-ecology. RECh Compliance RECh substances of high concern (SVHCs) information is available for this product. Since the European Chemical gency (ECH) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree representative to insure you get the most up-to-date RECh SVHC Declaration. RECh banned substance information (RECh rticle 67) is also available upon request. This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, or air traffic control systems. Related Links Cree SiC Schottky diode portfolio: http://www.wolfspeed.com/power/products#sicschottkydiodes Schottky diode Spice models: http://www.wolfspeed.com/power/tools-and-support/diode-model-request2 SiC MOSFET and diode reference designs: http://go.pardot.com/l/11562/215-7-31/349i Copyright 218 Cree, Inc. ll rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. Cree, Inc. 46 Silicon Drive Durham, NC 2773 US Tel: +1.919.313.53 Fax: +1.919.313.5451 www.cree.com/power 6 C4D212H Rev. -, 2-218
Mouser Electronics uthorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cree, Inc.: C4D212H