Oven Controlled Crystal Oscillators

Similar documents
Oven Controlled Crystal Oscillators

Oven Controlled Crystal Oscillators

Oven Controlled Crystal Oscillators

SMD TCXO/VCTCXO ASTXR-12 OVERVIEW: ESD Sensitive. Revised: Moisture Sensitivity Level (MSL) 1

Ultra Low Phase Noise VCXO

TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR

Ultra Low Phase Noise XO / VCXO

Excellent Integrated System Limited

Key Electrical Specifications Parameters Minimum Typical Maximum Units Notes ppm

Ultra-Low Phase Noise OCXO

2.0 Absolute Maximum Ratings 1 Parameter Min. Max. Unit.

RFPT Specifications. SMD Low Acceleration Sensitivity TCXO / TCVCXO. Product description. Applications

Pb RoHS. ASG-D Series; LVDS Output STANDARD SPECIFICATIONS: 7.0 x 5.0 x 1.9mm APPLICATIONS: FEATURES:

32.768kHz IoT Optimized SMD Crystal

TX-801 Temperature Compensated Crystal Oscillator

Ultra-miniature, Low Power, kHz MEMS Oscillator

QTCT570 SERIES 5 x 7mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to MHz Description

2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Nominal frequency range

TX-500 Temperature Compensated Crystal Oscillator

QTCT350 SERIES 3.2 x 5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 5.0Vdc MHz to 52.

Frequency Translator / Jitter Attenuator

Ultra-miniature, Low Power, kHz MEMS Oscillator

Performance Specifications

Ultra-miniature, Low Power, kHz MEMS Oscillator

QTCT220 SERIES 2.0 x 2.5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 52.

CLEARCLOCK POWER OPTIMIZED 0.12ps 5x7mm XO

OX-200 Oven Controlled Crystal Oscillator

PECL, LVDS, CMOS Output Low Jitter SMD Crystal Oscillator

MX-041 Oven Controlled Crystal Oscillator

PERFORMANCE PLASTIC PACKAGE ULTRA MINIATURE PURE SILICON TM CLOCK OSCILLATORS ASDMP Series

C MHz 52 MHz

ClearClock Ultra-Low Jitter & Power Optimized 5.0 x 3.2 mm XO. (3): Stability over OTR. D: ±15ppm over -20 C to +70 C F: ±20ppm over -40 C to +85 C

MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator

TX-700 Temperature Compensated Crystal Oscillator

Low Power MEMS Jitter Attenuator

TX-705 Temperature Compensated Crystal Oscillator

OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator

OX-171 Oven Controlled Crystal Oscillator

Ultra-miniature, Low Power, kHz SMD MEMS Oscillator

Frequency Divider Evaluation Board

Performance Specifications

OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator

Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V

Performance Specifications

OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator

Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V

Rakon Product Proposal

2.0 Absolute Maximum Ratings 1 Parameter Min. Max. Unit. a. Storage temperature C b. Supply voltage (VDD) V

OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator

Model 149 Stratum 3E, 9x14 mm OCXO

RFID Chip Antenna ACAJ-110- ACAJ-110-T Moisture Sensitivity Level (MSL) MSL = 1. SPECIFICATION Frequency Range. 868/915MHz VSWR

High Performance MEMS Jitter Attenuator

Rakon Product Proposal

Performance Specifications. Frequency Stabilities 1 ( 10 & 20 MHz)

OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator

Ultra-Low Phase Jitter SMD Clock Oscillator

Solder Dip Option: T = Standard S = Solder Dip (*) G = Solder Dip (*) Package

Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz

STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO

Performance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve

Solder Dip Option: T = Standard S = Solder Dip (*) Package

LOW POWER TCXO & VCTCXO OSCILLATOR

IQXT IQXT-205-3

AMJD-SERIES. fout = 27MHz, VDD=1.8V,

±0.1 ppm ±5 % ±0.1 ppm ±10 % 10 kω // 10 pf

MX-600 Microprocessor Controlled Crystal Oscillator High Precision

EX-421 Evacuated Miniature Crystal Oscillator

PARAMETER SYMBOL CONDITIONS VALUE UNIT

MX-503 Microprocessor Controlled Crystal Oscillator High Precision

Solder Dip Option: T = Standard S = Solder Dip (*) Package: 81 = Thru-Hole 82 = Formed Lead 83 = Gull Wing

VS-701 High Shock Discrete Voltage Controlled SAW Oscillator

MX-503 High Precision Microprocessor Controlled Crystal Oscillator

OD100LP-Series Low Phase Noise

DTCXO Temperature Compensated Real-Time-Clock Module with SPI bus

IQXT IQXT is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package.

QTCH350LD92-32K768Hz Q T CH 350 L D kHz Drilling, data logging tools Oil service industry High temperature applications

Oven Controlled Crystal Oscillator OCXO SERIES IEEE 1100

VX-706 Voltage Controlled Crystal Oscillator

VS-507 Voltage Controlled SAW Oscillator

TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator

Other Options Available For An Additional Charge Hot Solder Dip Sn60/Pb40 per MIL-PRF Specifications subject to change without prior notice.

VT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.

3.000 MHz MHz. Cat. No.

VX-701 Voltage Controlled Crystal Oscillator

MEMS Oscillator, Low Power, LVCMOS, MHz to MHz

Low Noise Oscillator series LNO 4800 B MHz

HCMOS 7 x 5mm 1.8V Oscillator

Low Noise Oscillator series LNO 100 OCXO LNO 100

Solder Dip Options T = Standard S = Sn60Pb40 G=SAC305. Package 86 =Leaded 80 = Formed Leads 85=SMT. VCXO model

Logic & Supply Voltage: L = LVHCMOS +3.3V at 15pF N=LVHCMOS +2.5V at 15pF R = LVHCMOS +1.8V at 15pF

Oven Controlled Crystal Oscillator OCXO SERIES 8100

OX-221 Oven Controlled Crystal Oscillator

O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM)

OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator

VX-505 Voltage Controlled Crystal Oscillator Extended Temperature

OX-400 / OX 401 Oven Controlled Crystal Oscillator

OX-249 Space Qualified Oven Controlled Crystal Oscillator (OCXO)

Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f MHz

C

CMOS/LVCMOS HF VCXO AE-X32BXX-X Series

Transcription:

Moisture Sensitivity Level (MSL) 1 OVERVIEW: Abracon s series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology, patented by Rakon. This Advanced Technology coupled with Rakon s proprietary manufacturing techniques enable ±10 stability over -20 C to +70 C, with typical short-term aging of better than ±2 per day. Sophisticated Integrated Oven Control architecture ensures fast warm-up time, while minimizes initial power consumption to 350mW typical at 25 C. Further, the integration of critical functionality improves overall product reliability by reducing FIT rates 10x relative to traditional discrete OCXOs. The series is offered in Industry leading 9.7 x 7.5 x 4.3 mm SMT package, while -DIL is available in 21.7 x 13.08 x 8.6 mm leaded hermetic package. FEATURES: APPLICATIONS: Stratum 3 Small Cells Switches and Routers Time & Frequency References SyncE and IEEE 1588 Compact package size: 9.7 x 7.5 x 4.3mm Frequency stability over temperature as low as ±10 over -20 to +70 C Low power consumption High reliability STANDARD SPECIFICATIONS: Parameters Frequency Range Supply Voltage (Vdd) Input Power (warm-up) Input Power (steady-state) Operable Temperature Range Storage Temperature Range Initial Frequency Tolerance @25 C±2 C, at time of shipment Reflow Shift Frequency Stability over Operating Temperature Range in Still Air Slope in Still Air Holdover Stability Minimum Typical Maximum Units 50 5.5-40 400 85 MHz V mw mw ºC -55 +125 ºC ±0.5 See te 1 ±1 After 1hr recovery ±10 ±100 Ref. to (FMAX+FMIN)/2 ±0.5 ±2 / C 5 2.7 1000 <±2.5~±4 Free-run Accuracy Stability vs. Supply Voltage Change (for Freq. < 26MHz) Load Coefficient (for Freq. < 26MHz) Frequency Aging (per day) ±4.6 ±10 ±10 <±2 tes ±5% @25 C still air Temperature ramp 1 C/minute max. 24hrs, temperature variation ±1 C. See te 2 All causes, 20 years life, ref. to nominal frequency. ±5% variation in Vdd, ref. to freq. @Vdd=V ±5pF/10% variation in load, ref. to freq. @ 15pF load See te 2

Parameters Frequency Aging (long-term stability) Minimum Maximum Units First Year ±1 10 Years ±3 Warm-up Time Typical <3 Root Allan Variance (@20MHz) 7x10 Acceleration Sensitivity minute -11 <2 /g 1.1 Vpk-pk tes See te 3 @25 C, τ=1.0s Gamma vector of all 3 axes from 30Hz to 1500Hz Clipped Sinewave Output Voltage 0.8 Output Load 10kΩ//10pF High-level Output Voltage (VOH) 90%*Vdd V Low-level Output Voltage (VOL) Output Load Rise and Fall Time (tr, tf) Duty Cycle Control Voltage (Vc) Frequency Tuning Range (over Control Voltage range) 10%*Vdd V 30 pf 45 4 55 ns % 0. 5 2.5 V 0 15 ±5 Frequency Tuning Linearity Slope Port Input Impedance Modulation Bandwidth Phase ise @ 24.576MHz Carrier @ 1 @ 10 @ 100 @ 1,000 @ 10,000 @ 100,000 @ 1,000,000 1 +8 80 3.5-55 -88-110 -135-148 -152-153 % 10% to 90% At 50% level Ref. to Frequency @ Vc=1.5V Deviation from linear over control voltage range /V kω khz te: 1. The characteristics of the component may be temporarily affected by the processes of assembly and soldering. The frequency specifications apply 48 hours after assembly. minal conditions apply unless otherwise stated. 2. After 30 days of continuous operation. 3. Time needed for frequency to be within reference to frequency after 1hour, at 25 C. Parameter is assembly and operating history dependent

PART IDENTIFICATION: - MHz - - Configuration Code See Table below for available configurations Frequency See Table below for available frequencies Packaging Blank = Bulk T = Tape & Reel(1k/reel) Table of Available Configurations Abracon P/N 12.800MHzM6451LF 10.000MHzM5625LF 12.800MHzM5649LF 12.800MHzM5776LF 19.200MHzM6049LF 20.000MHzM6452LF 20.000MHzM6226LF 20.000MHzM5627LF 20.000MHzM6260LF 20.000MHzM6261LF Supply Voltage (V) Freq. Stability Over Temperature () Slope (/ C) Operating Temperature ( C) Output Type Voltage Control ±1.00 ±10-20 to +70-20 to +85 ±1.00-20 to +70-20 to +70

Abracon P/N 24.576MHzM6069LF 24.576MHzM6453LF 25.000MHzM5857LF 25.000MHzM5859LF 25.000MHzM6454LF 30.720MHzM6328LF 30.720MHzM6455LF 38.880MHzM6456LF 40.000MHzM5917LF 40.000MHzM6457LF 50.000MHzM5948LF 20.000MHzM5627LF 24.576MHzM5834LF 49.152MHzM5942LF Supply Voltage (V) Freq. Stability Over Temperature () Slope (/ C) Operating Temperature ( C) Output Type Voltage Control ±0.83 ±1.00-30 to +85 Clipped Sine ±0.83 ±1.00 ±40 ±3.00

REFERENCE DESIGN INFORMATION Equivalent Rakon P/N Chipset M6451LF ne M5625LF IDT 12.800MHzM5649LF M5649LF 12.800MHzM5776LF M5776LF M6049LF TI Abracon P/N 12.800MHzM6451LF 10.000MHzM5625LF 19.200MHzM6049LF 20.000MHzM6452LF 20.000MHzM6226LF 20.000MHzM5627LF 20.000MHzM6260LF 20.000MHzM6261LF 24.576MHzM6069LF 24.576MHzM6453LF Reference Design Chipset P/N Keyword 82V3399, 82V3391, 82V3398, SyncE/SONET Sync Equipment Timing Source (SETS) ACS1790T, ACS9510, ACS9520T, ACS9522T, ACS9550, ACS9593T, ACS8522BT, ACS8509, ACS8510, ACS8514, ACS8515, ACS8520, ACS8520A, ACS8522, ACS8522A, ACS8525, ACS8525A, ACS8526, ACS8527, ACS8530, ACS8595 ACS1790T, ACS9510, ACS9520T, ACS9522T, ACS9550, ACS9593T, ACS8522BT, ACS8509, ACS8510, ACS8514, ACS8515, ACS8520, ACS8520A, ACS8522, ACS8522A, ACS8525, ACS8525A, ACS8526, ACS8527, ACS8530, ACS8595 TCI6612, TCI6614, TCI6630 M6452LF Stratum 3 Topsync Option Topsync Option Smallcell M6226LF ACS1790T, ACS9510, ACS9520T, ACS9522T, ACS9550, ACS9593T Topsync Option M5627LF ACS1790T, ACS9510, ACS9520T, ACS9522T, ACS9550, ACS9593T TOPPort Sync Box / Topsync option M6260LF ACS9522T, ACS9550, ACS9593T Smallcell M6261LF ACS9522T, ACS9550, ACS9593T Smallcell M6069LF TI TCI6612, TCI6614, TCI6630 Smallcell M6453LF

REFERENCE DESIGN INFORMATION CONTD: Abracon P/N Equivalent Rakon P/N Chipset 25.000MHzM5857LF M5857LF Broadcom 25.000MHzM5859LF M5859LF Broadcom 25.000MHzM6454LF 30.720MHzM6328LF 30.720MHzM6455LF 38.880MHzM6456LF 40.000MHzM5917LF 40.000MHzM6457LF Reference Design Chipset P/N BCM560xx, BCM561xx, BCM562xx, BCM563xx, BCM564xx, BCM56440, BCM565xx, BCM566xx, BCM567xx, BCM56750, BCM568xx, BCM56850 BCM560xx, BCM561xx, BCM562xx, BCM563xx, BCM564xx, BCM56440, BCM565xx, BCM566xx, BCM567xx, BCM56750, BCM568xx, BCM56851 M6454LF M6328LF Stratum 3 Stratum 3, G.8262, G.8263 Cavium CNF71xx Stratum 3, G.8262, G.8263 M6455LF M6456LF M5917LF Mindspeed Transcede 2000, Transcede 3000, Transcede 4000 Stratum 3, G.8262, G.8263 G.827x M6457LF 50.000MHzM5948LF M5948LF Broadcom 20.000MHzM5627LF BCM560xx, BCM561xx, BCM562xx, BCM563xx, BCM564xx, BCM56440, BCM565xx, BCM566xx, BCM567xx, BCM56750, BCM568xx, BCM56853 M5627LF Microsemi ZL30152, ZL30155, ZL30157, ZL30159, ZL30160, ZL30165 24.576MHzM5834LF M5834LF Microsemi 49.152MHzM5942LF M5942LF Microsemi Keyword ZL30152, ZL30155, ZL30157, ZL30159, ZL30160, ZL30165, ZL30145, ZL30146, ZL30150, ZL30152, ZL30155, ZL30158, ZL30159, ZL30160, ZL30165, MAX24705, MAX24710, MAX24305, MAX24310, ZL30130, ZL30138, ZL30142, ZL30143, ZL30153, ZL30154, ZL30161, ZL30162, ZL30163 ZL30152, ZL30155, ZL30157, ZL30159, ZL30160, ZL30165, ZL30145, ZL30146, ZL30150, ZL30152, ZL30155, ZL30158, ZL30159, ZL30160, ZL30165, MAX24705, MAX24710, MAX24305, MAX24310, ZL30130, ZL30138, ZL30142, ZL30143, ZL30153, ZL30154, ZL30161, ZL30162, ZL30163 G.827x G.827x

OUTLINE DIMENSION: Recommended Land Pattern Pin 1 2 3 4 Dimension: mm XO NC Function VCXO Control Voltage Ground RF-output Supply Voltage te: 1. For correct operation, decouple the supply voltage with a 10µF capacitor close to the oscillator. 2. The GND of the control voltage needs to be connected directly to pin 2 as ground lead impedance may cause performance degradation. REFLOW PROFILE

TAPE & REEL: Reel Size: Ø13 Reel Qty: 1000pcs/reel Dimension: mm ATTENTION: Abracon Corporation s products are COTS Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.