BAS7.../BAS7W Silicon Schottky Diode General-purpose diode for high-speed switching Circuirotection Voltage clamping High-level detecting and mixing BAS7-S: For orientation in reel see package information below Pb-free (RoHS compliant) package ) Qualified according AEC Q BAS7W BAS7-L BAS7-W BAS7 BAS7- BAS7-W BAS7-S BAS7-5 BAS7-5W!! $ # "!,,,,,!, ",,! BAS7-6 BAS7-6W BAS7-7 BAS7-7W! "!,,,, Pb-containing package may be available upon special request 7-9-9
BAS7.../BAS7W Type Package Configuration L S (nh) Marking BAS7W BAS7 BAS7-L BAS7-W BAS7- BAS7-S BAS7-W BAS7-5 BAS7-5W BAS7-6 BAS7-6W BAS7-7 BAS7-7W SOD SOT TSLP-- SCD8 SOT SOT6 SOT SOT SOT SOT SOT SOT SOT single single single, leadless single series dual series series common cathode common cathode common anode common anode parallel pair parallel pair.8.8..6.8.6..8..8..8 white 7 7s F 7 7s 7s 7s 75s 75s 76s 76s 77s 77s Maximum Ratings at T A = 5 C, unless otherwise specified Parameter Symbol Value Unit Diode reverse voltage V R 7 V Forward current I F 7 ma Non-repetitive peak surge forward current t ms I FSM Total power dissipation BAS7, BAS7-7, T S 7 C BAS7-L, T S 7 C BAS7-W, T S 7 C BAS7-, BAS7-6, T S 8 C BAS7-S/W/-6W, BAS7W, T S 97 C BAS7-5, T S C BAS7-5W, T S 9 C BAS7-7W, T S C P tot 5 5 5 5 5 5 5 5 mw Junction temperature T j 5 C Operating temperature range T op -55... 5 Storage temperature T stg -55... 5 7-9-9
BAS7.../BAS7W Thermal Resistance Parameter Symbol Value Unit Junction - soldering point ) BAS7, BAS7-7 BAS7-L, BAS7-W BAS7-, BAS7-6 BAS7-S/W, BAS7-6W BAS7-5 BAS7-5W BAS7-7W BAS7W R thjs K/W 7 5 5 9 Electrical Characteristics at T A = 5 C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. DC Characteristics Breakdown voltage V (BR) 7 - - V I (BR) = µa Reverse current V R = 5 V I R - -. µa Forward voltage I F = ma I F = ma I F = 5 ma Forward voltage matching ) I F = ma V F mv 6 7 75 75 88 75 V F - - For calculation of R thja please refer to Application Note Thermal Resistance V F is the difference between lowest and highest V F in a multiple diode component. 7-9-9
BAS7.../BAS7W Electrical Characteristics at T A = 5 C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. AC Characteristics Diode capacitance C T -.5 pf V R =, f = MHz Forward resistance r f - - Ω I F = ma, f = khz Charge carrier life time I F = 5 ma τ rr - - ps 7-9-9
BAS7.../BAS7W Diode capacitance C T = ƒ (V R ) f = MHz Forward resistance r f = ƒ (I F ) f = khz. BAS 7W/BAS 7W EHB C T pf Ohm.5 rf..5. 6 V 8 V R - - ma I F Reverse current I R = ƒ(v R ) Forward current I F = ƒ (V F ) T A = Parameter T A = Parameter BAS 7W/BAS 7W EHB BAS 7W/BAS 7W EHB Ι R µ A T A = 5 C Ι F ma 85 C - - 5 C - T A = - C 5 C 85 C 5 C - 6 V 8 -..5. V.5 V R V F 5 7-9-9
BAS7.../BAS7W Forward current I F = ƒ (T S ) BAS7, BAS7-7 Forward current I F = ƒ (T S ) BAS7-L ma 8 ma 8 6 6 IF 5 IF 5 5 5 6 75 9 5 C 5 5 5 6 75 9 5 C 5 T S T S Forward current I F = ƒ (T S ) BAS7-W Forward current I F = ƒ (T S ) BAS7-, BAS7-6 ma 8 ma 8 6 6 IF 5 IF 5 5 5 6 75 9 5 C 5 5 5 6 75 9 5 C 5 T S T S 6 7-9-9
BAS7.../BAS7W Forward current I F = ƒ (T S ) BAS7-S/W, BAS7-6W, BAS7W Forward current I F = ƒ (T S ) BAS7-5 ma 8 ma 8 6 6 IF 5 IF 5 5 5 6 75 9 5 C 5 5 5 6 75 9 5 C 5 T S T S Forward current I F = ƒ (T S ) BAS7-5W Forward current I F = ƒ (T S ) BAS7-7W ma 8 ma 8 6 6 IF 5 IF 5 5 5 6 75 9 5 C 5 5 5 6 75 9 5 C 5 T S T S 7 7-9-9
BAS7.../BAS7W Forward current I F = ƒ (T S ) BAS7W Permissible Puls Load R thjs = ƒ ( ) BAS7 8 ma K/W 6 IF 5 RthJS.5...5...5 D = 5 5 6 75 9 5 C 5 T S -6-5 - - - s Permissible Pulse Load I Fmax / I FDC = ƒ ( ) BAS7 Permissible Puls Load R thjs = ƒ ( ) BAS7-L K/W IFmax/IFDC - RthJS D =.5...5...5.5...5...5 D = -6-5 - - - s -6-5 - - - s 8 7-9-9
BAS7.../BAS7W Permissible Pulse Load I Fmax / I FDC = ƒ ( ) BAS7-L Permissible Puls Load R thjs = ƒ ( ) BAS7-W K/W IFmax/IFDC - D =.5...5...5 RthJS D=.5...5...5-6 -5 - - - s -6-5 - - - s Permissible Pulse Load I Fmax / I FDC = ƒ ( ) BAS7-W Permissible Puls Load R thjs = ƒ ( ) BAS7-, BAS7-6 K/W IFmax/IFDC D=.5...5...5 RthJS.5...5...5 D = -6-5 - - - s -6-5 - - - s t P 9 7-9-9
BAS7.../BAS7W Permissible Pulse Load I Fmax / I FDC = ƒ ( ) BAS7-, BAS7-6 Permissible Puls Load R thjs = ƒ ( ) BAS7-S K/W IFmax/IFDC - D =.5...5...5 RthJS.5...5...5 D = -6-5 - - - s t P -6-5 - - - s Permissible Pulse Load I Fmax / I FDC = ƒ ( ) BAS7-S Permissible Puls Load R thjs = ƒ ( ) BAS7-W, BAS7-6W K/W IFmax/IFDC - RthJS D =.5...5...5.5...5...5 D = -6-5 - - - s -6-5 - - - s 7-9-9
BAS7.../BAS7W Permissible Pulse Load I Fmax / I FDC = ƒ ( ) BAS7-W, BAS7-6W Permissible Puls Load R thjs = ƒ ( ) BAS7-5 K/W IFmax/IFDC - D =.5...5...5 RthJS.5...5...5 D = -6-5 - - - s -6-5 - - - s Permissible Pulse Load I Fmax / I FDC = ƒ ( ) BAS7-5 Permissible Puls Load R thjs = ƒ ( ) BAS7-5W K/W IFmax/IFDC - D =.5...5...5 RthJS.5...5...5 D = -6-5 - - - s -6-5 - - - s 7-9-9
BAS7.../BAS7W Permissible Pulse Load I Fmax / I FDC = ƒ ( ) BAS7-5W Permissible Puls Load R thjs = ƒ ( ) BAS7-7W K/W IFmax/IFDC - D =.5...5...5 RthJS.5...5...5 D = -6-5 - - - s -6-5 - - - s Permissible Pulse Load I Fmax / I FDC = ƒ ( ) BAS7-7W Permissible Puls Load R thjs = ƒ ( ) BAS7W IFmax/IFDC - D =.5...5...5 RthJS.5...5...5 D = -6-5 - - - s -7-6 -5 - - - s 7-9-9
BAS7.../BAS7W Permissible Pulse Load I Fmax / I FDC = ƒ ( ) BAS7W IFmax/IFDC D =.5...5...5-6 -5 - - - s 7-9-9
Package SCD8 BAS7.../BAS7W Package Outline.8 ±..7 ±. MAX.. M A +.5. -. ±.5 7. ±. A Cathode marking. ±.5.7±.. ±.5 Foot Print.5.5.5 Marking Layout (Example) 5, June Date code BAR6-W Type code Cathode marking Laser marking Standard Packing Reel ø8 mm =. Pieces/Reel Reel ø8 mm = 8. Pieces/Reel ( mm Pitch) Reel ø mm =. Pieces/Reel Standard Reel with mm Pitch..5 8.5 Cathode marking..9 Cathode marking.7 7-9-9
BAS7.../BAS7W Date Code marking for discrete packages with one digit (SCD8, SC79, SC75 ) ) CES-Code Month 5 6 7 8 9 a p A P a p A P a p A P b q B Q b q B Q b q B Q c r C R c r C R c r C R d s D S d s D S d s D S 5 e t E T e t E T e t E T 6 f u F U f u F U f u F U 7 g v G V g v G V g v G V 8 h x H X h x H X h x H X 9 j y J Y j y J Y j y J Y k z K Z k z K Z k z K Z l L l L l L n N 5 n N 5 n N 5 ) New Marking Layout for SC75, implemented at October 5.. 5 7-9-9
Package SOD BAS7.../BAS7W Package Outline +..5 -. ±.5.9 +. -..5 ±.. +. -.5 Cathode marking.5 ±.5 +. -..7. A +.5 -..5 M A +..5 -.6 Foot Print.8.7.8.6 Marking Layout (Example) BAR6-W Type code Cathode marking Laser marking Standard Packing Reel ø8 mm =. Pieces/Reel Reel ø mm =. Pieces/Reel. 8.9 Cathode marking.65.5 6 7-9-9
Package SOT BAS7.../BAS7W Package Outline. +..8 -.5.9 ±..9.7 B +.. -.5.5 M B. ±.5.5 MIN. MAX....8. M A ±.. MAX. MAX..8...5. ±. A Foot Print.8..8..8.8.9..9 Marking Layout (Example) RF s 56 Manufacturer 5, June Date code (YM) Pin BFP8 Type code Standard Packing Reel ø8 mm =. Pieces/Reel Reel ø mm =. Pieces/Reel..6 8 Pin.5.5 7 7-9-9
Package SOT BAS7.../BAS7W Package Outline +. ). -.5.9 ±..9 B C.95. ±.5.5 MIN. MAX. ±.. MAX....8 MAX..8...5. ±. A.5 M BC. M A Foot Print ) Lead width can be.6 max. in dambar area.8.8..9..9 Marking Layout (Example) EH s Manufacturer 5, June Date code (YM) Pin BCW66 Type code Standard Packing Reel ø8 mm =. Pieces/Reel Reel ø mm =. Pieces/Reel.9. 8..65 Pin.5.5 8 7-9-9
Package SOT BAS7.../BAS7W Package Outline ±.. +. -.5 x. M. MAX...9 ±. A.65.65.±.. MIN..5 +. -.5.5 ±.. M A Foot Print.6 Marking Layout (Example) Standard Packing Reel ø8 mm =. Pieces/Reel Reel ø mm =. Pieces/Reel.. 8.8.6.65.65 Manufacturer 5, June Date code (YM) Pin BCR8W Type code Pin.5. 9 7-9-9
Package SOT BAS7.../BAS7W Package Outline ±... MAX...9 ±. A. +. -.5 x. M.5 +..6 -.5. ±.. MIN.. M Foot Print.6 Marking Layout (Example) 5, June Date code (YM) BGA Type code Standard Packing Reel ø8 mm =. Pieces/Reel Reel ø mm =. Pieces/Reel.. 8.6.8 A.5 +. -.5.5 ±..5.9 Manufacturer Pin Pin.5. 7-9-9
Package SOT6 BAS7.../BAS7W Package Outline ±. +.. -.5 6 5 6x. M. MAX...9 ±. A Pin marking.65.65.±.. MIN. +..5 -.5 Foot Print..9.6.7.65.65 Marking Layout (Example) Small variations in positioning of Date code, Type code and Manufacture are possible. Manufacturer 5, June Date code (Year/Month) Pin marking Laser marking BCR8S Type code Standard Packing Reel ø8 mm =. Pieces/Reel Reel ø mm =. Pieces/Reel For symmetric types no defined Pin orientation in reel... 8.5 ±.. M A Pin marking.5. 7-9-9
Package TSLP-- BAS7.../BAS7W Package Outline Top view +.. Bottom view.5 MAX..6 ±.5.65±.5 ±.5 Cathode marking ).5 ±.5 ) Dimension applies to plated terminal Foot Print For board assembly information please refer to Infineon website "Packages".6.5.5.75.75.75..95.5 Copper Solder mask Stencil apertures Marking Layout (Example) BAS6-L Type code Cathode marking Laser marking Standard Packing Reel ø8 mm = 5. Pieces/Reel Reel ø mm = 5. Pieces/Reel (optional).5.6 8 ).5 ±.5 Cathode marking.76 7-9-9
BAS7.../BAS7W Edition 6-- Published by Infineon Technologies AG 876 München, Germany Infineon Technologies AG 7. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics ( Beschaffenheitsgarantie ). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 7-9-9