SURFACE MUNT SUPERFAST RECTIFIER VLTAGE 5 to 6 Volts CURRENT 1 Amperes FEATURES For surface mounted applications in order to optimize board space Built-in strain relief Easy pick and place Superfast recovery times for high efficiency. Plastic package has Underwriters Laboratory Flammability Classification 94V- Glass passivated junction Lead free in comply with EU RoHS 211/65/EU directives. Green molding compound as per IEC61249 Std.. (Halogen Free).62(1.6).47(1.2).181(4.6).157(4.).114(2.9).98(2.5) 12( 35) 6(.152) MECHANICAL DATA Case: JEDEC D-214AC molded plastic Terminals: Solder plated, solderable per MIL-STD-75,Method 226 Polarity: Indicated by cathode band Standard packaging: 12mm tape (EIA-481) Weight:.23 ounce,.679 gram.6(1.52).3(.76).8(.23).2(.51).28(5.28).188(4.8) 1 2 Cathode Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 6 Hz, resistive or inductive load. For capacitive load, derate current by 2%. PARAMETER SYMBL ES1A ES1B ES1C ES1D ES1E ES1G ES1J UNITS Maximum Recurrent Peak Reverse Voltage V RRM 5 15 2 3 4 6 V Maximum RMS Voltage V RMS 35 7 5 14 2 28 42 V Maximum DC Blocking Voltage V DC 5 15 2 3 4 6 V Maximum Average Forward Current at T L =12 C I F(AV) 1 A Peak F orward S urge Current : 8.3ms s ingle ha lf sine-wave superimposed on rated load (JEDEC method) I FSM 3 A Maximum Forward Voltage at 1A V F.95 1.25 1.7 V Maximum DC Reverse Current at Rated DC Blocking Voltage T J =25 C T J = C I R 1 15 μa Maximum Reverse Recovery Time (Note 1) t rr 35 ns Typical Junction Capacitance (Note 2) C J 7 pf Typica Thermal Resistance (Note 3) R θjl 35 C / W perating Junction and Storage Temperature Range T J,T STG -55 to +15 C NTES: 1.Reverse Recovery Tset Conditions:I F =.5A,I R =A,Irr=.25A 2.Measured at MHz and applied reverse voltage of 4. volts. 3.8.mm 2 (.13mm thick ) land areas. PAGE. 1
RATING AND CHARACTERISTIC CURVES 18 CAPACITANCE, pf 16 14 12 8. 6. 4. 2..1 1 REVERSE VLTAGE, VLTS Tj= 25 C f= MHz Vsig = 5mVp -p AVERAGE FRWARD RECIFIED CURRENT AMPERES 1.5.5 SINGLE PHASE, HALF-WAVE, 6Hz RESISTIVE R INDUCTIVE LAD P.C.B MUNTED N.3 x.3" (8. x 8. mm)cpper PAD AREAS 2 4 6 8 12 14 16 18 LEAD TEMPERATURE, C FIG.1 TYPICAL JUNCTIN CAPACITANCE FIG.2 MAXIMUM AVERAGE FRWARD CURRENT DERATING INVSTANTANEUS REVERSE CURRENT, MICRAMPERES T J= 125 C T=75 J C T=25 J C INSTANTANEUS FRWARD CURRENT, AMPERES.1.1 5-2V 3-4V 6V T=25 J C.1 2 4 6 8 12.1.4.6.8 1.2 1. 4 1. 6 1. 8 PERCENT F RATED PEAK INVERSE VLTGE, VLTS INSTANTANEUS FRWARD VLTAGE VLTS FIG.3 TYPICAL REVERSE CHARACTERISTICS FIG.4 TYPICAL FRWARD CHARACTERISTICS FRWARD SURGE CURRENT, AMPERES pk (HALF-SING WAVE) 35 3 25 2 15 5 1 2 4 6 8 2 4 6 8 NUMBER F CYCLES AT 6Hz FIG.5 MAXIMUM NN-REPEITIVE SURGE CURRENT PAGE. 2
MUNTING PAD LAYUT RDER INFRMATIN Packing information T/R - 7.5K per 13" plastic Reel T/R - 1.8K per 7" plastic Reel PAGE. 3
Part No_packing code_version ES1A_R1_1 ES1A_R2_1 For example : RB5V-4_R2_1 Part No. Serial number Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1 st Code Packing size code 2 nd Code HF or RoHS 1 st Code 2 nd ~5 th Code Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right riented) (TRR) Tape and Reel (Left riented) (TRL) FRMING A N/A HF serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHDE UP (PBCU) PANASERT T/B CATHDE DWN (PBCD) U D PAGE. 4
Disclaimer Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. PAGE. 5