COMPONENT Component A Component B 513-80859-999 DESCRIPTION Zinc organic primer with galvanising USE Transozinc Epoxy Primer can be used as a high performance anticorrosive base coat on steel surfaces, as structures, machinery and tank walls. It's recommended for severe industrial environments and over permanently immersed surfaces. It can be covered with any finish. Structure Exterior/Interior Surface Product line Buried Pipes, Buried Structures, Exterior pipes, exterior tank walls, Interior Pipe Walls, Metallic Structures, Structural elements (column, trusses, etc.), Wastewater tanks Indoor, Outdoor, Roofed Exterior walls Steel Professional/industrial Line CHARACTERISTICS ASSESSMENT Finish Primer Excellent cathodic protection Matte PHYSICAL PROPERTY DATA
Volume Solids (%) 57 to 59% Weight per Gallon (kg/gl) 11,8 Weigth Solids of the mix (%) 86 to 88% Theoretical Yield (m²/gallon) 103 m² a 1 mil VOC (grams/liter) 365 Maximum Service Temperature ( C) 120 Pot life 12 h to 20 C Useful life in stock Comp. A: 12 months Comp. B: 12 months Recommended Dry Film Thickness 3 mils Definition of theoretical yield: Maximum surface that can be covered with a painting under ideal conditions. The practical performance varies depending on the type of surface used tool, applicator experience and other factors. 1 mil = 0.0254 mm. PRESENTATION AVAILABLE PRESENTATIONS, Metal container of 3,785 Liters = 1 Gallon AVAILABLE COLORS Gris 513-80859-999, Metallic Container of 0.946 Liters = 1/4 Gallon SURFACE PREPARATION CONDITION New steel Surfaces INSTRUCTION New steel or iron surfaces should be cleaned with Desoxidante- Desengrasante Sur # 305-900.
Mechanical cleaning Abrasive blast Cleaning Use hand or power tools to clean surface up to a SSPC (Standard Steel Structures Painting Council) SP2 or SP3 Cleaning Standard. Clean with abrasive blast to get a SSPC (Standard Steel Structures Painting Council) SP5 o SP10 cleaning standard. PRODUCT PREPARATION COMPONENT MIXING RATIO MIXING INSTRUCTIONS Component A: - Component B: 513-80859-999 - COMPONENTE B 4 partes Mix Component A and B as indicated, wait for the induction time and finally add the diluent.: 1 parte INDUCTION TIME : 20 minutes PRODUCT APPLICATION IT CAN BE APPLIED WITH Airless spray Brush Spray gun (gravity or suction feed)
Airless spray application Nozzle size. 0,43-0,50 mm Fan Angle 60-80 Dry Coat Thickness Wet Film Thickness Line Pressure 3 mil 5,2 mil 180 BAR These are references values. It may be necessary to vary output pressure or nozzle size to get better results. Application conditions Surface Temperature 5 C - 35 C Room Temperature 10 C - 40 C Relative Humidity 10% - 85% Surface temperature should be at least 3 C (5 F) over dew point. Number of layers and thickness Apply the following layers of the intended paint system within the recommended repainting times. Drying times Dry-to-Touch Time Recoat time Curing Time (days) 1,5 h 4 h - 24 h 7 d Dry times are based in normal application, temperature, film thickness and dilution conditions and are provided to serve as a guide. If necessary to apply a second coat, or the next layer of the paint system, observe the recommended drying times.
OBSERVATIONS If you need more information, one of our technicians will assist you. Call 800-SUR-2000 or email us at customerservice@gruposur.com Keep container tightly closed in a ventilated place, between 20 and 30 C, out of reach of children. Container must be kept tightly closed to avoid loss of its properties. HEALTH The user of this product may need the appropriate Personal Protection Equipment (PPE), as described in its Safety data Sheet (MSDS), available at http://www.gruposur.com If you need to dispose of empty containers of our products in Costa Rica, contact your SUR Color paint store or our industrial compound in La Uruca, San Jose.