Carbide Circular Sawing Systems P-70B Min. 5/8 Max. 2.75 Capacity P-100B Min. 3/4 Max. 4 Capacity P-150B Min. 2-3/4 Max. 6 Capacity
Carbide Circular Saws Standard Features Include Servo Driven Automatic Bar Feed Hydraulic Vise Clamping (side & vertical vises) Floating Bar Feed Vise Servo Drive & Precision Ball Screw Feed Hydraulic Sorting Chute Inverter Control Blade Speeds Automatic Loading Table Electro-magnetic Blade Brake 4 Carbide Blade Guides Air Filter Automatic Chip Conveyor Mist Type Coolant System Automatic trim cut separation
Automatic Loading Table Allows for fully automatic operation Can be set for continuous operation or just one bar Material is lifted onto the shuttle table one by one Trim cut is made automatically Remnant is ejected automatically Adjustable ramp settings Continuous operation increases productivity
Loading Table Capacities Weight Capacity P-70B P-100B P-150B 8,200 lbs. 8,200 lbs. 11,000 lbs. Shuttle Pulling Capacity P-70B P-100B P-150B 1,210 lbs. 1,320 lbs. 2,750 lbs.
Blade Feed System The saw blade is controlled by a Mitsubishi servo in conjunction with a precision ball screw. Precision blade control provides Vibration free cutting Optimum cycle time Surface finish of 64 RMS Minimal burr P70B Saw blade is driven through a heavy duty transmission Blade speeds are controlled through an inverter P100B & P150B
Blade Drive & Brake The blade drive transmission is cooled by an oil bath lubrication system. The electro-magnetic powdered metal blade brake compensates for transmission gear backlash which reduces vibration and prevents blade damage, ensuring smoother cuts and longer blade life
Carbide Blade Guides Four carbide blade guides Thin body carbide blades Minimal kerf loss Mist Type Coolant System Powered blade brush Automatic Chip Removal System
Automatic Bar Feed System The Automatic Bar Feed is powered by an AC servo motor and precision ball screw Hydraulic floating vise jaws accommodate crooked stock Sensors detect the bar end and signal the automatic loader Rollers both support and provide ease of material movement Blade Saver Feature - at the end of each cut the bar feed vise retracts the material preventing the blade from contacting the material as the head returns Remnants can be as Little as 3.4
Vise Clamping Hydraulically operated Clamping the material on three sides Two Machine vise clamps and one machine vertical clamp The position of the vise jaws automatically set the start and return limits of the blade P150B shown with optional remnant reducing vise.
Touch Screen Control User friendly touch screen control. Storage for up to 9 different jobs. Storage for up to 21 different material types with preprogrammed blade speeds and cutting rates. The self-diagnostic feature monitors 18 separate saw functions Amp meter can be set to automatically stop job when blade wear is detected. From the Touch Screen the Operator Can Set Shape and Size of the Work Piece Blade Speed in RPM Chip load Trim Cut Length Cut Length Job Quantities
Air Filter The large capacity Air Filter is standard equipment on all models and filters the vapors from the mist lubrication system keeping the environment around the saw clean
Hydraulic Discharge Chute Hydraulically controlled sorting chute automatically separates trims and remnants from finished parts.
Optional Roller Chain Loader Optional Roller Chain Loading Tables are available in place of the standard gravity feed loading tables. These powered loading tables are used for loading squares, rectangles and other non-round shapes.
Optional Remnant Reducing Vice Note: Some covers and guards may have been removed for illustration purposes.
Model P-70B P-100B P-150B Capacity Motor Min:.50 Max: 2.75 Min:.625 Max: 2 Min:.75 Max: 4 Min:.75 Max: 3.125 Min: 2.75 Max: 6 Min: 2.75 Max: 4.375 Blade Drive 10 HP 15HP 20HP Hydraulic Pump 2HP 3HP 5HP Saw Blade (T=Kerf t=thickness) Ø285 x T2.0 x 1.75t mm Blade Feed Ø360 x T2.6 x 2.25t mm Servo Motor and Ball Screw Ø460 x T2.7 x 2.25t mm Blade Speed 30-150 RPM 30-130 RPM 30-130 RPM Load Table 47.2 x 204.7 Bar Feed AC Servo Motor and Ball Screw Automatic Feed Length Single Feed 3/8-24 / Multiple Feed 118 Single Feed 3/8-27.5 /Multiple Feed 118 Automatic Chip Conveyor Cooling Tank Capacity Chain Type Air Compressed Oil Mist 29 L 32 L 35 L Machine Weight 5060 lbs. 6160 lbs. 7700lbs. Floor Space ( ) Machine 79 W x 68-1/2 L 114 W x 68-1/2 L 122 W x 82 L With 5M Load Table 79 W x 269 L 114 W x 269 L 122 W x 282-1/2 L 4L