RETENTION KNOBS/PULL STUDS - PDF Free Download

RETENTION KNOS/PULL STUDS LIVE ENTERS LTHE HUKS MDE IN THE US QUNTITY DISOUNTS FOR END USERS! uy 0 or more of any retention knob and receive a 0% Discount! VISE ESSORIES VISE WS We offer arguably the largest variety of retention knobs in the United States. We offer, Lyndex and Parlec knobs in T and T Tapers. If you cannot find the correct retention knob, please call us and let us help you locate the correct knob for your machine. Why hoose Retention Knobs? retention knob is certified free of cracks after being INDIVIDULLY Magnetic icle Tested by an Independent Nationally ertified Laboratory in the U.S. to ensure knob integrity. (STM E-0) Manufacturing date, batch number and part number are all clearly laser marked on each retention knob. Knobs are made to applicable standards (NSI, MT, DIN). oolant holes are left non-carburized. Made from 8620, heat-treated to R 56/58. Stronger threads resulting from thread rolling on a vast majority of the knobs. High quality black oxide treatment to ensure long life. Made in US. SELETION OF THE ORRET KNO Machine tool manufacturers use various styles and sizes of retention knobs. They often look similar and appear to be interchangeable, but in reality they are not. It is very important not to interchange metric retention knobs with inch toolholders. The use of the incorrect knob, or the incorrect usage of a knob, may result in injury or property damage. To ensure choosing the correct knob, please use the following guidelines: ) Specify the make model and spindle size of your machine. 2) Make sure that the critical dimensions are correct. The retention knob print, usually found in the machine manual, is one of the best tools for selection of the correct knob. ) The part number of previously used retention knobs from any manufacturer can also help us provide you with the correct knob for your machine. Our database contains most manufacturer s part numbers We try to insure that we specify the correct knob, however, it is the responsibility of the end user to check that the supplied knobs are correct for the machine tool and taper type. WRNING! Machining enter manufacturers have increased the draw bar force on retention knobs frequently in recent years. It is now more important than ever to check your retention knobs periodically. Remember to fully tighten the retention knob. Failure to do so may result in the toolholder coming loose during operation. PREVENTIVE MINTENNE ND PERIODI REPLEMENT machine out of alignment or used beyond capacity can cause failure. Metal fatigue, over time, can also cause failure. Retention knobs should be inspected periodically and replaced. ny signs of wear or damage indicate that the retention knobs should be replaced. Every 2 to years, depending on use, knobs should be removed from the holder and inspected. ny retention knobs showing indications of cracking must be discarded. If your machine has been in a collision, or releases a tool prematurely, this is may be an indication that the retention knob fingers, finger guide, belleville washers or the retention knob itself may be damaged. The machine tool should not be used until inspected by Maintenance or Factory trained personnel. In this case, all of the machine s retention knobs should be checked for cracks or damage immediately. STRIGHT SHNK OLLET HOLDERS LTHE USHINGS DRILL HUKS THREDING/GROOVING RIDE INSERTS UTTING TOOLS MHINERY PREISION TOOLS DEURRING Over-tightening of the retention knob may result in bulging of the toolholder. Retention knob sockets and torque wrenches. are highly recommended to ensure the correct tightness. Please all Us nd Let Us Help You Select The orrect Retention Knob For Your Machine. all Us Or Visit Our Website For Our omplete Selection! 200- Master atalog 7 TOOL STORGE OOLNT/FLUIDS

T STYLE RETENTION KNOS / PULL STUDS RETENTION KNOS FOR T 0 TOOL HOLDERS to [G] LYNDEX [] PRLE [] Knob T 0 SHNK HOLDERS (M6-2.00 Thread)- MS 0 STYLE or MT Style 2 P0T I 5º- P0T I 5º- P0T II 60º- P0T II 60º- P0T III 90º- P0T III 90º- 0.59 0 (5mm) 0.9 (0mm) 0.989 (25.mm).265 (2.mm) 0.22 (6.mm).02.77 0.26 0-H $8.80 (5mm) 0-S $5.68 0-H $8.80.02.77 0.26 (5mm) 0-S $5.68 0-H $8.80.02.77 0.26 (2mm) (5mm) 0-S $5.68 T 0 SHNK HOLDERS (M6-2.00 Thread)-U.S. NSI Style all Us Or Visit Our Website For Our omplete Selection! ft / lbs 0-502S $6.7 P-MH0 $26.6 85 H H H metric-no 0-50H $5.8 0.0 0.60 0.20 STD (.2mm) (6.mm) (mm) 0.70 0.90 0-50S $2.5 (8.8mm) (2.5mm) $25.8 P-00 $.6 85 $2.52 P-00 $8.00 85 $22.5 P-00 85 $2.52 P-00 $8.00 85 $25.8 P-002 85 $2.52 P-002 $25.8 85 $25.8 P-0 $27. 85 P-0 SOLID 85 metric-no =0.669 0-50H $7.77 P-MZ0 $8.02 85 0.550 0.755 0.20 =0.669 (mm) (9.2mm) (6.mm) 0-50S $.62 $29.0 P-F0 $2. 85 FDL T 0 SHNK HOLDERS (M6-2.00 Thread)- ISO TYPE Style 6 6 0.78 (9mm) 0.55 (mm) (2mm). (29mm) 0.275 (7mm) 0.275 (7mm) 0-7500H $9.86 500 $.2 P-MK0 85 0-7500S $7.5 85 2 P-020 $2.75 85 T 0 SHNK HOLDERS (M6-2.00 Thread)- DIN 69872 Form Style DIN Std DIN Std MDE IN THE US /2" drive 6 0-750H $2.58 $.2 P-DIN0 $.6 85 0.78 0.55 0.787.02 0.57 500ISOH (9mm) (mm) (26mm) (mm) 6 P-DIN0S $25.8 85 Kingston Tool offers a complete line of balanced N tool holders, manufactured to meet today s machinists need for speed and accuracy at a competitive price. alanced to 2000 rpm @ g6., Kingston alanced Toolholders increase spindle and tool life, as well as helping to improve surface finish. Quick-Look Retention Knob Finder = Diameter = Diameter = E= H= oolant Hole = to For pplicable N Mills 0-50S/H FDL (T Taper) HS 0-S/H (T Taper) 0-S MORI SEIKI HS & FDL make both T & T Taper Toolholders. Please make sure you are using the correct taper retention knobs. LNED TOOLHOLDERS FOR INRESED SPEED & SPINDLE LIFE alanced Toolholders Starting t Only $5.00 each FETURES: alanced to 2,000 rpm @ g6. Manufactured to the highest degree of technical excellence to ISO9002 quality control standards ertification included with each holder rafted from SE 8620 alloy steel T lass ccuracy alanced holders result in less vibration, chatter and extended tool life. 00% Satisfaction Guaranteed! 200- Master atalog 9 LTHE HUKS LIVE ENTERS VISE WS VISE ESSORIES STRIGHT SHNK OLLET HOLDERS LTHE USHINGS DRILL HUKS THREDING/GROOVING RIDE INSERTS UTTING TOOLS MHINERY PREISION TOOLS DEURRING OOLNT/FLUIDS TOOL STORGE

T STYLE RETENTION KNOS / PULL STUDS RETENTION KNOS FOR T 0 & T 0 TOOL HOLDERS to T 0 SHNK HOLDERS (/2" - Thread)- U.S. NSI Style 2 all Us Or Visit Our Website For Our omplete Selection! Quick-Look Retention Knob Finder 0-S 0-50S 0-50S For pplicable N Mills FDL MZK HS KITMUR OKUM-HOW ININNTTI (RROW-SER) [G] LYNDEX [] PRLE [] Knob 0-H $2.99 P-0 $26.6 0 0.520 0.85 0.20 0.6 0.0 (.2mm) (9.8mm) (8.mm) (.8mm) (2.6mm) 0-S $2.5 P-0N 0 0.9 (0mm) 0.26 0.6 0.787-0-HI- RONINH T 0 SHNK HOLDERS (5/8" - Thread)- MS 0 Style or MT Style 2 Thin Thin 0.78 (9mm) 0.589 (5mm) 0.55 (mm) 0.92 (0mm) (2mm). (29mm) 0.989.265 0.25 0-502H $8.80 (25.mm) (2.mm) (.2mm) 0-502S $5.68 2 0-50H $7.77 0.989.265 0.26 (25. mm) (2.mm) 2 0-50S $.62 2 2 Thin Thin 2 2 Thin Thin Shorter Than other 0 0.989 (25.mm).000 (25.mm) 0.992 0.992 0.989 (25.mm) 0.989 (25.mm).265 (2.mm).265 (2.mm).259 (2mm).259 (2mm).265 (2.mm).265 (2.mm) P-00 $2.75 0 - P-00 $22.50 85 0.26 0.26 0.20 (mm) 0.20 (mm) 0.26 0.26 0-50SG $.62 H H LY-0S- $26.00 P-005 $22.50 85 $2.52 P-005 $8.00 85 $26.00 P-009 $22.50 85 $2.52 P-009 $8.00 85 $2.52 85 0-50S $.62 P-022 85 0-6006S $6.5 0-6006H $9.5 H $2.52 85 $25.8 85 0-H $7.77 P-0 $.6 85 0-S $.62 0.992.259 0.20 0-9006S (2mm) (mm) 0-9006H 2 9 0.708 (8mm) 0.775 (9.7mm) 0.98 (2.9mm).05 (26.7mm) 0.2 00 0- $.0 2 0.989.265 0.26 2 (25.mm) (2.mm) 0-S $.62 LY-0S- H = Diameter = Diameter = E= H= oolant Hole = to HS & FDL make both T & T Taper Toolholders. Please make sure you are using the correct taper retention knobs. $2.52 P-0 $8.00 85 $2.52 85 $25.8 85 $25.8 85 0-900S $.62 MZK $25.8 P-M00 $0.8 85 0-H $7.77 P-00 $.6 85 LY-0S- $2.52 P-00 $8.00 85 0-50H $9.86 P-00 $2.75 85 0.59 0.05.9.6 0.87 (5.mm) (0.mm) (28.9mm) (6.5mm) (.8mm) 0-50S $5.68 P-00 $2.75 85 HELPFUL HINT: worn knob is extremely detrimental to the TIR of a toolholder and replacing your retention knob is an easy and inexpensive way to improve the accuracy of the toolholder by up to 0X! /2" drive RK-W0 $5.00 200- Master atalog 5 LTHE HUKS LIVE ENTERS VISE WS VISE ESSORIES STRIGHT SHNK OLLET HOLDERS LTHE USHINGS DRILL HUKS THREDING/GROOVING RIDE INSERTS UTTING TOOLS MHINERY PREISION TOOLS DEURRING OOLNT/FLUIDS TOOL STORGE

T STYLE RETENTION KNOS / PULL STUDS = Diameter = Diameter = E= H= oolant Hole = to MDE IN THE US LTHE HUKS LIVE ENTERS VISE WS VISE ESSORIES RETENTION KNOS FOR T 50 TOOL HOLDERS to [G] LYNDEX [] PRLE [] Knob T 50 SHNK HOLDERS (" - 8 Thread)- MS 0 Style or MT Style P50T I 5º-Inch P50T I 5º-Inch P50T I 5º-Inch P50T I 5º-Inch P50T II 60º-Inch P50T II 60º-Inch P50T III 90º- Inch- P50T III 90º- Inch- P50T I 5º-Inch 0.77 (9mm) 0.55 (mm) 0.787.026 (26.mm) 0.20 0.669 50-50S $8.02 (2mm) (7mm) all Us Or Visit Our Website For Our omplete Selection! ft/ lbs 50-502H $25.70 0 50-50H $2.6 H.85.779 0.90 7 50-50R $2.95 (5.2mm) (5.2mm) (9.9mm) 50-H $2.6.85.77 0.90 (5.2mm) (5mm) (9.9mm) 50-S $8.02 2 - P50T I 5º-Inch P50T II 60º-Inch P50T III 90º- Inch- - 0.90 (2.mm) (2mm) 0.900 (22.9mm) 0.906 (2mm) 0.667 (6.9mm) 0.669 (7mm) - - 0 0.990 -.85 (5.2mm).85 (5.2mm).85 (5.2mm).77 (5mm).85 (5.2 mm).85 (5.2 mm).85 (5.2 mm).779 (5.2mm).77 (5mm).779 (5.2mm).28 (82.5mm).779 (5.2mm).779 (5.2mm).779 (5.2mm) T 50 SHNK HOLDERS (" - 8 Thread)- U.S. NSI Style 0.690 (7.5mm) 0.90 (9.9mm) 0.92 (9.96mm) 0.90 (9.9mm) 0.90 (9.9mm) 0.90 (9.9mm) 0.90 (9.9mm) 0.90 (9.9mm) 50-H $2.6 50-S $8.02 H MZK H HITHI OKUMH $28.2 $25.8 $28.2 $25.8 $28.2 $28.2 $25.8 50-50R P-5005 P-MK 050 P-5005 P-50 P-50 P-MH500 P-500 P-500 $2.25 0 $2.00 0 $20.25 0 $2.25 0 $20.25 0 $20.25 0 $2.25 0 $20.25 0 /2"drive RK-W50- $6.22 0 - $56.00 0 - $5.9 0 - $5.28 0 - $5.9 0 - P-50 $28.2 0 0.700.000 - Integrex, (7.8mm) (25.mm) (5.08mm) 8 50-506R $.6 0,Ring Integrex,, No Ring. 0 0.820 8 50-506H $2.9 0 (29mm) (20.8mm) 50-H $5.9 $2.52 0.706.000 STD (7.9mm) (25.mm) 50-R $9.86.6 (7.mm). (29mm).05 (26.6mm) - 0.706 (7.9mm).080 (27.mm) 0.700 (7.8mm).000 (25.mm).500 (8.mm).000 (25.mm) 0.20 (5.2mm) 50-S $.88 - STD P-M50 $0.8 RK-W50-200- Master atalog 5 P-50 P-M50 P-50 N P-60/50 $7.25 0 $0.8 0 $7.25 0 $9.9 0 - $5.9 0 RK-W50- STRIGHT SHNK OLLET HOLDERS LTHE USHINGS DRILL HUKS THREDING/GROOVING RIDE INSERTS UTTING TOOLS MHINERY PREISION TOOLS DEURRING OOLNT/FLUIDS TOOL STORGE

MRO & SFETY RSIVES ENDMILLS, DRILLS INDEXLE DRILLS TOOLHOLDERS RETENTION KNOS MHINE VISES HUK WS FLT STOK/DRILL ROD MESURING TOOLS TPS & REMERS TURNING & ORING TP HOLDERS ER, D, TG OLLETS MGNETI HUKS LTHE WORKHOLDING T STYLE RETENTION KNOS / PULL STUDS RETENTION KNOS FOR T 50 ND T 60 TOOL HOLDERS DRWR LMPING FORE GGE N Machines using pull-studs for tool retention experience a slow but progressive loss of tool holding pressure from the time the machine is new. This little known fact has a major impact on surface finishes, cutting tool life, and on your productivity. Testing a drawbar requires a force gage which simulates a tool being held in the spindle. The lamprite Gage uses a common tool holder as the interface between the gage and machine spindle, eliminating the need for a high-priced precision adapter for each different spindle size (only HSK-type spindles require an adapter). Prevent Unscheduled Maintenance! Low drawbar force can result in: Increase utter Life! Reduced cutter life hatter and rough finishes Protect Your Spindles! Difficulty with repeatability Lower feeds and productivity Rapid wear of toolholder and spindle tapers Patented The lamprite Gage was designed for accurate spindle tension testing right on the machine. The actual pressure exerted by the spindle drawbar mechanism is read directly on the dial, so there is never a need for any calculations or conversions. Drawbar force checking is made easy using the lamprite drawbar force gage. Drawbar testing takes less than one minute, so production time is barely affected. Its simple and rugged design requires no batteries, electrical cords or delicate electronic components to pre-set, calibrate or burn out. FETURES: Test drawbar force in less than one minute Reads directly in lbs of force- no calculating Rugged, reliable and works on all machines Helps to prevent unscheduled maintenance HSK models also available Made in US ccuracy Traceable to NIST- Suitable for ISO Shops! to T 50 SHNK HOLDERS (" - 8 Thread)- ISO Std. Type Style ISO Std. Inch- ISO Std. Inch- 6 6.00.00 0.826 (2mm) 75-75 0.992 0.980 (2.9mm).50 (.mm).50 (.mm) HSK Models lso vailable! 0.280 (7.mm) T 50 SHNK HOLDERS (" - 8 Thread)- DIN 69872 Form Style DIN Std. Inch-.00 0.826 (2mm) 75 0.977 (2.8mm) T 50 SHNK HOLDERS (" - 8 Thread)- Style. 2 0.90 (2.9mm) 0.90 (2.9mm) 0.706 (7.9mm) 0.708 (8mm) 90 0.90 (22.9mm) (2mm).8 (mm).28 (0.9mm).220 (mm) T 60 SHNK HOLDERS - ( /" - 7 Thread)- U.S. NSI Style.60 (7.mm).05 (26.6mm) 90 5.080 (27.mm).500 (8.mm) all Us Today For ll Of Your Machine Tool Needs! 5 200- Master atalog est Practices for Retention Knob Usage: Store unused knobs carefully so the knobs do not get dented, scratched or nicked in storage. Use the correct knob for the tool machine and the tool holder. Log the installation date. Properly tighten the knobs at all times per the machine manufacturer recommendations. Use a torque wrench. Over-tightening or under-tightening are both detrimental. Do not use glue or binding compound on the knobs. Inspect and clean knobs regularly. Unusual wear on the knobs may indicate other problems with gripper or the feed fingers. You should only see a uniform set of slight indentations from your grip fingers. hange O-ring on a regular basis. Replace the retention knobs regularly every two years, depending on the operation. Replace knobs more often for tools used in roughing. [G] LYNDEX [] PRLE [] Knob 50-750H 500 500ISO /2" drive $25.8 0 - $6.26 0 - - 50-7550H P-500 $2. 0 #N/ P-MS50 RK-W50- $20.25 0 - $28.2 P-502 $28.2 0 - - P-60 $02.90 lamprite Kit Includes: Gage head Spindle adapter Internal transfer screw coupling Foam fitted metal tool box PSI lbs Taper dapter Included MDE IN THE US Kit T 0 taper R-GK0 $70.55,000 Lb. T 0 taper R-GK0 $70.55 T 0 taper R-GK0 $70.55 T 0 taper R-G5K0 $70.55 T 0 taper R-G5K0 $70.55 5,000 Lb. T 50 taper R-G5K50 $79.55 T 50 taper R-G5K50 $79.55 T or T 0 & 50 R-G5K0/50 $87.05 0,000 Lb. T 50 taper R-G0K50* $797.05 T 50 taper R-G0K50* $797.05 *0,000 lb gages only required for EXTR HEVY DUTY machines and some HSK s.

RETENTION KNO SOKETS RETENTION KNO SOKETS Most N facilities are unaware of the critical importance of correctly measuring torque when installing retention knobs. Operators often employ adjustable wrenches and similar crude tools that poorly grip the retention knob and fail to measure torque. For optimal performance and safety, retention knobs are designed to be tightened to specific torque settings. Stud allows the operator to safely and correctly torque retention knobs. Retention Knob or Standard MT Std. PT0-I FETURES: ids in the installation and removal of retention knobs Use in conjunction with a torque wrench to uniformly tighten knobs to Manufacturer s standards Extends life of retention knob and tool holderhelp to eliminate rounding off of knob s corners value clearly laser marked on socket s have /2 drive- For use with Wrench ( RK-WRENH) Retention Knob RK-W0M- FETURES: For use with retention knob sockets Using /2 or /8 drive wrenches Dial-in torque setting up to 50 for /2 and 80 for /8 oth marking scales available Reversible ratchet Supplied with durable plastic case 0lbs MT Std. PT0-II RK-W0M- 0lbs 0-H RK-W0M- 0lbs 0-S RK-W0M- $.62 0lbs 0-S RK-W0M- 0lbs 0-S RK-W0M- 0lbs 0-7500H RK-W0M- 0lbs DIN Std. 0 RK-W0D $5.00 0lbs MT Std. PT5-I RK-W0M 0lbs $58.50 MT Std. PT5-II RK-W0M 0lbs MT Std. PT0-I MT Std. PT0-II 0-502S 0-H 0-S 0-H 0-S 0-H 0-S 0-50H 0-50S 0-50H 0-50S ISO Std 0 0-7500H 0-7500S DIN Std. 0 0-750H MT Std. PT5-I RK-W5M 00lbs $6.00 MT Std. PT5-II RK-W5M 00lbs 5-S RK-W5M 00lbs 5-S RK-W5M $6.00 00lbs 5-S RK-W5M 00lbs TORQUE WRENHES For Use With Retention Knob s Retention Knob or Standard Retention Knob ISO Std 5 RK-W5M 00lbs $6.00 DIN Std. 5 RK-W5M 00lbs MT Std. PT50-I RK-W50M- MT Std. PT50-II RK-W50M- 50-H RK-W50M- 50-S RK-W50M- 50-H RK-W50M- 50-S RK-W50M- 50-H RK-W50M- 50-S RK-W50M- 50-509H-NEW RK-W50 $69.0 50-509S RK-W50 ISO Std 50 RK-W50M- DIN Std. 50 RK-W50M- 50-7500S-NEW RK-W50M- 50-7500H-NEW RK-W50M- U.S. Std. NSI 0 RK-W0 0 lbs 0-H RK-W0 $5.00 0 lb 0-S RK-W0 0 lb 0-50H 0-50S 0-50SG - 0-502H 0-502S 0-50S 0-6006S 0-6006H 0-H 0-S 0-0-9006S 0-9006H 0-900S Retention Knob or Standard all Us Or Visit Our Website For Our omplete Selection! D RK merican Retention Knobs Retention Knob 0-H 0-S 0-50H 0-50S U.S. Std. NSI 0 0-H 0-S 0-SG - 0-505H 0-505S 0-7500H 0-7500S 0-755H 5-S RK-W5M 00lbs 5-S RK-W5M $6.00 00lbs 5-S RK-W5M 00lbs 5-50H RK-W5 00lbs 5-50S RK-W5 $6.00 00lbs U.S. Std. NSI 5 RK-W5 00lbs 50-50H RK-W50-50-50R RK-W50-50-50S RK-W50-50-H RK-W50-50-S RK-W50-50-H RK-W50-50-S RK-W50- U.S. Std. NSI 50 RK-W50-50-H RK-W50-50-R RK-W50-50-S RK-W50-50-506H RK-W50-50-506R RK-W50-50-7550H RK-W50- Drive /8 RK-WRENH-/8 $9.99 /2 RK-WRENH-/2 $9.99 200- Master atalog 55 LTHE HUKS LIVE ENTERS VISE WS VISE ESSORIES STRIGHT SHNK OLLET HOLDERS LTHE USHINGS DRILL HUKS THREDING/GROOVING RIDE INSERTS UTTING TOOLS MHINERY PREISION TOOLS DEURRING OOLNT/FLUIDS TOOL STORGE