Exposed Ends (EXP) Mtching specie veneer on 1/2" thick cbinet sides. Avilble in both Advntge nd Essence lines. Specify: L (Left), R (Right) or B (Both). 1/4" revel from edge of front frme to surfce of the side. Soft Mple nd Hrd Mple cbinets hve Hrd Mple exposed ends. Pricing: per cbinet, per side Advntge: use exposed end pricing column. Essence: exposed end pricing unpublished. Flush Ends (FL) Mtching specie veneer on exposed of 3/4" thick cbinet sides. Avilble in Advntge line only. Specify: L (Left), R (Right) or B (Both). 1/32" revel from edge of front frme to surfce of the side. Soft Mple nd Hrd Mple cbinets hve Hrd Mple flush ends. Pricing: per cbinet, per side use flush end pricing column. Flush Unexposed Ends (FUE) Shop grde veneer on exterior fce of 3/4" thick cbinet sides finishing is not vilble. Order when thicker, non-exposed sides re required for solid surfce nd stone counter tops. Avilble in Advntge line only. Specify: L (Left), R (Right) or B (Both). 1/32" revel from edge of front frme to surfce of the side. Pricing: per cbinet, per side use Conestog s online ordering system or Conestog order entry for pricing. Key: D=Number of Doors DF=Number of Drwer Fronts DB=Drwer Boxes EXT=Extended Stiles EXP=Exposed End(s) FL=Flush End(s) WS=Solid Wood Shelves MI=Mtching Interior FT=Flush Toe Cbinet Systems Winter 2016.1
Extended Stiles (EXT) Adds 3" to the left, right or both stiles s n lterntive to loose filler strips. Specify: ESL (Extended Stile Left), ESR (Extended Stile Right) or ESB (Extended Stile Both). Totl stile width is 4-1/2" with no glue lines. Avilble on most wll, bse nd tll units. Mtching Interior (MI) Cbinets will hve unfinished mtching specie interior sides, tops, bottoms, shelves nd bcks. Avilble on Advntge line only. Specify: MI (Mtching Interior). Shelves re mtching specie 3/4" plywood with veneer edgebnding on front edge. Soft Mple nd Hrd Mple cbinets hve Hrd Mple veneered interior components. Cbinets with mtching interior stndrd do not hve the mtching interior upchrge included in the cbinet price. Pricing: per cbinet percentge upchrge per specie. Mtching Specie Interior Specie Percent Upchrge Cherry 30% Mple 25% Red Ok 15% Key: D=Number of Doors DF=Number of Drwer Fronts DB=Drwer Boxes EXT=Extended Stiles EXP=Exposed End(s) FL=Flush End(s) WS=Solid Wood Shelves MI=Mtching Interior FT=Flush Toe.2 Cbinet Systems Winter 2016
Flush Toe (FT) Bottom ril height is 5-1/2". Specify: FT (Flush Toe). Cbinet side is mnufctured without toe notch. 96" tll cbinets do not use toe pltform. Avilble on most bse nd tll cbinets. Shped Bottom Ril (SBR) Ril height is 5-1/2". Flush toe option is stndrd; cbinet side is constructed without toe notch. Design is centered on bottom ril. To order specify using CWS designtions ssocited with the design. Not vilble with loose toe pltform option for tll cbinets. Avilble on most bse, tll nd vnity cbinets. Minimum cbinet width is 15". Use Conestog s online ordering system or Conestog order entry for pricing. CWS6 Elegnt Arch shown CWS4 Romn Arch: CWS6 Elegnt Arch: CWS5 Clssic Arch: CWS7 Trditionl Arch: Dust Top (DT) Full top in plce of front nd bck top strips. Avilble on Advntge or Essence lines. Specify: DT (Dust Top). Use Conestog s online ordering softwre or Conestog order entry for pricing. Key: D=Number of Doors DF=Number of Drwer Fronts DB=Drwer Boxes EXT=Extended Stiles EXP=Exposed End(s) FL=Flush End(s) WS=Solid Wood Shelves MI=Mtching Interior FT=Flush Toe Cbinet Systems Winter 2016.3
Prepre for Flse Door Side Option (PFD) Solid Wood Shelf Upgrde Prepres the sides of wll, bse, tll or vnity cbinets to ccept 3/4" thick doors s decortive, integrl cbinet sides. Doors not included, must be ordered seprtely. Cbinet crcss width is reduced to provide 13/16" extension of the front frme on left, right or both sides. Overll cbinet front width remins unchnged. Left nd right stiles re 1-1/2" wide. Avilble on Advntge or Essence lines. Specify: L (Left), R (Right) or B (Both). Avilble on most wll, bse nd tll cbinets. Conceled Inset Hinges nd Pull-Out Trys (POT s) re not vilble with Prepre for Flse Door Side Option. Use Conestog s online ordering system or Conestog order entry for pricing. Order door width 3/4" less thn overll cbinet depth. Height of door equls cbinet height. Replces Advntge line 3/4" thick prefinished plywood shelving with 3/4" thick, prefinished solid wood shelving with bullnose on front edge. Solid wood shelves vilble up to 18" deep. Solid wood shelf upgrde is not vilble with mtching interior. Pricing: per cbinet use shelf pricing column. Plywood Shelf Upgrde Replces Essence line 3/4" thick pper covered prticle bord shelving with 3/4" thick, prefinished plywood shelving. Use Conestog s online ordering system or Conestog order entry for pricing. Key: D=Number of Doors DF=Number of Drwer Fronts DB=Drwer Boxes EXT=Extended Stiles EXP=Exposed End(s) FL=Flush End(s) WS=Solid Wood Shelves MI=Mtching Interior FT=Flush Toe.4 Cbinet Systems Winter 2016
Plywood Toebord Strips 1/2" thick 4" x 96" plywood strips vilble in Cherry, Hrd Mple or Red Ok. Order s loose prt; specify specie. Plywood Toebord Strips TE5003 (4" x 96") Specie Cherry Mple Red Ok Price Plywood Toebord Bcker 1/2" thick unfinished plywood strips. Designed to fully enclose bse, tll nd vnity toe spces nd provide bcker for finished toebords or mouldings. Bckers re 4-15/16" high, sized to fit between cbinet sides in the toe spce notch. To order, check toebord bcker option. Toebord Bcker Option Cbinet Width Less thn 36" 36-1/16" & bove Price Per Cbinet Cbinet Systems Summer 2017.5
Custom Top Revel (CTR) Specify Totl Top Revel Reduces door height to ttch decortive mouldings directly to cbinet fce frme. Left, right nd bottom revel remin unchnged. Avilble with 1-1/4" nd 1-3/8" overly only. 1-1/4" overly 1/2" top revel is stndrd, CTR vilble 9/16"- 1-1/4". 1-3/8" overly 1/4" top revel is stndrd, CTR vilble 5/16"- 1-1/4". Revel cn be specified in 1/16" increments. Specify: CTR followed by the totl mount of top revel required. Mximum revel is 1-1/4". See the Doors/Overly section for stndrd overly rules. Custom Bottom Revel (CBR) Reduces door height to ttch light ril or decortive mouldings directly to the bottom ril of the cbinet fce frme. Left, right nd top revel remin unchnged. Avilble with 1-1/4" nd 1-3/8" overly only mx CBR 1-1/4". Revel cn be specified in 1/16" increments. Specify: CBR followed by the totl mount of bottom revel required. Mximum revel is 1-1/4". See the Doors/Overly section for stndrd overly rules. Specify Totl Bottom Revel 4 Sided Dovetil Drwer Boxes English dovetil construction. Advntge drwer sides nd ends re 5/8" thick solid wood with 1/4" Birch plycore bottoms. Essence drwer sides nd ends re 5/8" thick plywood with 1/4" Birch plycore bottoms. Drwer boxes re ssembled nd prefinished. Drwer boxes cn be ordered with bottom lip mount or undermount drwer slides nd re pckged on skid seprte from cbinets. Boxes will be notched nd hook hole drilled ccordingly, bsed on slide requirements. Approprite upchrges pply. Hrd Mple, Soft Mple nd Wlnut drwer boxes re vilble with Cbinet Systems orders; custom pricing nd led-times pply. Pricing use 4-sided pricing column for cbinets using Blum STANDARD 230 slides. Add custom upchrges nd drwer slide upgrdes s needed per box. See the Interior Storge section of the Custom Product Mnul for dditionl drwer box led-times, options nd pricing..6 Cbinet Systems Summer 2017
Drwer Slide Bottom Lip Mount Slides STANDARD Blum STANDARD 230 Stndrd slide for drwer boxes on 18", 21" nd 24" deep cbinets only. Cbinet bcks hve pilot holes to locte rer mounting brckets. Not vilble with wll cbinets or POT s. 1/2" bottom revel is stndrd. Undermount Slide Optionl Upgrde Blum TANDEM Plus BLUMOTION Integrted Soft Close Optionl slide for drwer boxes on 18", 21" nd 24" deep cbinets. Stndrd slide for drwer boxes in 12", 15", 27" nd 30" deep cbinets. Cbinet bcks hve pilot holes to locte rer mounting brckets. Full extension zinc coted steel with rer mount screw-in brcket (15", 18", 21" or 24" deep). Side mount with clets (12", 27", or 30" deep). 1/2" bottom revel, undermount notch nd hook hole required. Blum TANDEM sizing without slides lso vilble. Upgrde price (including slides nd hrdwre): for 18", 21" nd 24" deep cbinets. Side Mount Slides Bll Bering Full Extension Stndrd slide for wll cbinets nd POT s when ordered with Blum STANDARD 230. Not vilble with bse, vnity or tll cbinets. 1/2" bottom revel is stndrd. Ordering - With Cbinet Select Blum STANDARD 230 or Blum TANDEM Plus BLUMOTION from drwer boxes/drwer slides box on Cbinet Systems order form. Side mount slides will replce Blum STANDARD 230 slides s pproprite for specific cbinets. Ordering - Loose Prts Cbinet Depth Blum STANDARD 230 Blum TANDEM Plus BLUMOTION Bll Bering Full Extension 12" Deep 2100497A 12-1/2" Deep 2100069A 15" Deep 2100498A 18" Deep 2100368A 2100476A 21" Deep 2100367A 2100475A 2100028A 24" Deep 2100366A 2100474A 2100027A 27" Deep 2100499A 30" Deep 2100500A Cbinet Systems Fll 2016.7
Cbinet Hinge BLUM Progrm Overview One piece steel, nickel plted conceled hinges designed for use with 3/4" thick front frmes. Hinges pcked in pirs or bulk pck nd include mounting screws, instlltion instructions nd wrrnty informtion. Hinge option is only vilble on door styles nd edge profiles which support conceled hinge boring. Doors over 42" high will receive 3 hinges. Specify hinging left or right for single door cbinets if hinge boring option is selected. Blum hinges crry limited lifetime wrrnty. COMPACT BLUMOTION Hinges with Integrted Soft Close Avilble for 1/2", 1-1/4" nd 1-3/8" overlys. Soft close feture is integrted in the hinge cup itself. Soft close function cn be esily dectivted with switch on individul hinges s needed bsed on the door size nd weight. All hinges feture side, height, nd depth djustment for fine tuning door spcing with wrpround fce frme mounting for ese of instlltion. Blum COMPACT BLUMOTION hinges require Pttern A cup only boring. Note: When 1-1/4" or 1-3/8" overly is ordered, extended stiles or loose filler strips my be required in pplictions where cbinets re instlled next to tll cbinet, corner cbinet or wll. Hinges vilble in pirs or bulk pck (50 hinges per pck, including mounting screws). 1/2" Overly Hinge Blum COMPACT BLUMOTION 38N 105 opening ngle COMPACT BLUMOTION Hinges (per pir) Prt # Overly Price 2100150A 1/2" 2100151A 1-1/4" 2100152A 1-3/8" COMPACT BLUMOTION Bulk Pck Hinges (50 hinges) Prt # Overly Price 2100153A 1/2" 2100154A 1-1/4" 2100155A 1-3/8" 1-1/4" nd 1-3/8" Overly Hinge Blum COMPACT BLUMOTION 39C 0 opening ngle.8 Cbinet Systems Fll 2016
Cbinet Hinge (continued) Blum Specilty Hinges 170 Hinges (overly 170 shown) Blum 71T6550 hinge Blum 175H6000 mounting plte Overly 170 Blum 71T6650 hinge Blum 175H5030 mounting plte Inset 170 Provides full ccess to cbinet interiors with 170 opening ngle for overly nd inset door pplictions. In 1-1/4" nd 1-3/8" overly pplictions, cbinets will hve their doors sized s 1/2" overly in width only. Two-piece, clip style hinge with side, height nd depth djustment points. 170 corner hinges require Pttern B cup only boring. BLUMOTION soft close feture is not vilble. Stndrd on WCP nd BLS cbinets. To order loose, specify: w Overly 170 prt # 2100063A w Inset 170 prt # 2100509A Inset Hrdwre Inset Mounting Brckets for TANDEM plus BLUMOTION Drwer Slides Drwer slide djustble mounting plte system for inset pplictions with frmed cbinetry. Elimintes the need for supplementl blocking behind fce frmes to secure TANDEM slides. Sold in pirs, brcket sets include instlltion screws nd instructions. Brckets fford up to 5/8" depth djustment using stndrd TANDEM rer mounting brckets. To order loose, specify prt # 2100200. Conceled Inset Hinges Hinge nd mounting plte system for conceled inset pplictions with frmed cbinetry. Soft close feture is integrted in the hinge cup. Hinge pcks include screws nd two djustble door stops with bumpers. Conceled inset hinges require Pttern B cup only boring. Door nd front frme thickness must mtch. To order loose, specify prt # 2100067A. (view of inside of cbinet) Blum 71B3650NI hinge Blum 175H5030.21 mounting plte 120 opening ngle Cbinet Systems Summer 2017.9
Cbinet Hinge (continued) Ferrri Progrm Overview One piece steel, self closing conceled hinges designed for use with 3/4" thick front frmes. Hinges pckged in pirs with mounting screws, instlltion instructions nd wrrnty informtion. Hinge option is only vilble on door styles nd edge profiles which support conceled hinge boring. Doors over 42" high will receive 3 hinges. Specify hinging left or right for single door cbinets. Ferrri hinges crry limited lifetime wrrnty. Overly Hinges Avilble with 1/2", 1-1/4" or 1-3/8" overlys. Soft close feture is integrted in the hinge cup. All hinges feture side, height nd depth cm style djustment for fine tuning door spcing. Ferrri hinges require Pttern A cup only boring. Note: When 1-1/4" or 1-3/8" overly is ordered, extended stiles or loose filler strips my be required in pplictions where cbinets re instlled next to tll cbinet, corner cbinet or wll to ensure dequte clernce for door functionlity. Ferrri Compct 1/2" Overly Hinge 105 opening ngle Ferrri Hinges (per pir) Prt # Overly Price 2100196A 1/2" 2100197A 1-1/4" 2100198A 1-3/8" Ferrri Compct 1-1/4" nd 1-3/8" Overly Hinge 105 opening ngle.10 Cbinet Systems Summer 2017
Shelf Omit Shelving Choose to omit interior shelving in wll, bse nd tll cbinets. Wll nd bse omit option deletes ll shelves. Tll cbinets: specify top, bottom or ll shelves. Omits shelving only; if shelf holes re not required, specify No Shelf Hole Option. Use Conestog s online ordering system or Conestog order entry for pricing. No Shelf Hole Option (NSH) Choose to omit line boring for shelf rests in wll, bse nd tll cbinets. Most wll nd ll bse omit option deletes ll holes. Two tiered wll cbinets (TTW) nd tll cbinets: specify top, bottom or ll holes. Omit shelf holes only; if shelves re not required, specify Omit Shelving Option. No upchrge. Nturl Finished Bottom Advntge line only. Cler UV finish on Nturl Birch veneer on top nd bottom of wll cbinets. To order, specify nturl finished bottom. Use Conestog s online ordering system or Conestog order entry for pricing. Cbinet Systems Summer 2017.
Extended Height Option - Tll Cbinets Vrible 96-1/16" - 120" Choose to extend height of Custom Size Tll Cbinets from 96-1/16" to 120". Advntge line only. Mtching interiors not vilble. Fixed section is bsed on cbinet configurtion chosen. Flush ends only. Use Conestog s online ordering system or Conestog order entry for pricing. Seprte 4" high toe pltform is vilble in ll heights nd is strongly recommended for the extended height option. When cbinet height chnges, top opening height chnges ccordingly. Mximum overll height is 120". 96-1/16" to 108" tll cbinets hve 8 shelves. 108-1/16" to 120" tll cbinets hve 9 shelves. Fixed.12 Cbinet Systems Summer 2017
Squre Toe Notch Option Intersecting corner of toe kick notch is 90. Aids in toebord moulding instlltion. Avilble on most bse, tll nd vnity cbinets. Not vilble with flush toe or shped bottom ril options. Stndrd 1/4" rdius 90 squre toe notch Leg Extension (LE) Option extends exterior frme stiles to the floor into toe spce for furniture leg styling. To order specify leg extension left, right or both. Stile width is 1-1/2". Not vilble with loose toe pltform or shped bottom ril. Toe spce side option is vilble, not on the sme side s the extension. Avilble on most bse tll nd vnity cbinets. Minimum cbinet width is 9". Toebord bcker vilble. Use Conestog s online ordering system or Conestog order entry for pricing. Cbinet Systems Summer 2017.13
Toe Spce Side Option (TSS) Plces stndrd toe spce depth on the left, right or both sides of most bse cbinets. Avilble in Advntge or Essence Lines. Specify TSS L (Left), R (Right) or B (Both). Toe Spce Side is not vilble on the following cbinets: BLS, BSC, BCFD, BAE, BEAL/R, RTB, RTR, RTL, TCH, DB, DBFD, DB2D, DB3D, LF2D, ORS, DWEP, REP, BFC, WSUD nd FS. Minimum cbinet width nd depth is 15". Shped Side Option (SSO) Option incorportes one of four vlnce designs on exposed of flush ends. To order, specify using Conestog designtions ssocited with the design. Avilble in Advntge or Essence Lines. Specify SSO L (Left), R (Right) or B (Both). Design is centered on the length of the cbinet side Not vilble with extended stiles, loose toe pltform or flush unexposed ends. Toe spce side option is vilble with but not on the sme side s the shped side option. Avilble on most bse, tll nd vnity cbinets. Minimum cbinet depth is 15". CWS6 Elegnt Arch shown CWS4 Romn Arch: CWS6 Elegnt Arch: CWS5 Clssic Arch: CWS7 Trditionl Arch:.14 Cbinet Systems Summer 2017