Data Sheet IT Field Electro-Magetic Flowmeters Mii-Mag with itegral XE coverter 10D1475W/Y Flowmeter Systems utilizes a smart microprocessor coverter. System accuracy of ±0.5% of rate. Field cofigurable via itegral push-butto thereby elimiatig the eed for a exteral hadheld device. Magetic wad allows cofiguratio without opeig the coverter cover. Log term accuracy stability ad stable zero poit by digital sigal processig with pulsed DC excitatio. Oe time cofiguratio at start up via EEPROM for field parameter selectio. Wafer desig body mouts betwee ANSI Class 150 or 300 flages adglobal flage desigs available. Available i sizes 1/10" to 4". MINI-MAG W/Y with itegral XE coverter Series 10D1475W/Y
Electro-Magetic Flowmeters Mii-Mag with itegral XE coverter - 10D1475W/Y MINI-MAG W MAGNETIC FLOWMETER (with Itegral XE Coverter) The Mii-Mag W is the ideal flowmeter to meter homogeeous liquids with a specific miimum electrical coductivity. The flowmeter's accuracy, lack of movig parts, miimal pressure loss ad resistace to abrasio ad chemical corrosio make it suitable for a variety of applicatios. For may years, magmeters have bee successfully istalled i the chemical, pharmaceutical, food, muicipal water ad waste water idustries. The Mii-Mag W flowmeter is compact desig where the primary ad coverter are assembled as oe uit. This cofiguratio provides for a simple cost savig istallatio with o eed for itercoectig cables betwee the primary ad coverter. The Series 10D1475W magmeter is a pulsed DC volumetric liquid flow rate detector. The coils of the meter primary are excited with pulsed DC curret i order to establish a magetic field. As a coductive liquid passes through this magetic field, a electrical voltage is iduced i the liquid which is directly proportioal to its velocity. This iduced voltage is sesed by the electrodes ad set to the coverter which digitally processes the sigals ad coverts them ito aalog ad digital output sigals. Egieerig Specificatios Miimum Liquid Coductivity: 20µS/cm Pressure Limits: 740 psi (5.10 Mpa) @ 100 F (38 C) Vacuum Limits: 1/10" to 3" -- Full Vacuum to 212 F (100 C) 4" -- Full Vacuum to 176 F (80 C) Temperature Limits: Process: -13 to 250 F (-25 to 121 C Ambiet: -4 to 131 F (-20 to 55 C) Ambiet Temperature 149 F 77 F 32 F -4 F Acceptable Operatig Rage -4 F 32 F 77 F 149 F 212 F 250 F Fluid Temperature Vibratio Limits: 5 to 14 Hz, 0.10 ich displacemet, 14 to 2000 Hz, 1g. Power Requiremets: 115/230 VAC, -15/+10%, 50/60 Hz ±6% 24 VDC, -30/+30%, residual ripple 5%. Power Cosumptio: 10 VA (primary ad coverter) Coil Excitatio Frequecy: 6-1/4 or 7/1/2 Hz for 50/60 Hz power supply. Empty Pipe Detector: Drives the outputs to a value whe the electrodes become ucovered (0% or 130% of the limitig curret value) ad the Totalizer will stop icremetig. Miimum fluid coductivity is 50 µs/cm. Low Flow Cut-Off: 0 to 10%, software selectable. Dampig: 0.5 to 99.99 secods, software selectable. Curret Output: Selectable betwee - 0/4-20 ma dc ito 0-600W load, 0/2-20 ma dc ito 0-1200W load, Scaled Pulse Output (Passive): Maximum scaled pulse output frequecy is 1 khz. The pulse multiplicatio factor may be set betwee 0.001 ad 1000.The pulse width is adjustable from 0.1 ms to 2000 ms. Isolatio: Curret ad pulse outputs are galvaically isolated from the iput circuit ad from oe aother. Cotact Output: The followig fuctios are software selectable: -System Supervisio -- opeed or closed at alarm -Empty Pipe -- opeed or closed at alarm -Forward / Reverse Flow -- closed for forward flow -Limit Alarm -- opeed or closed at alarm -Optocouple, termials G2 & P7 16V < UCEH < 30V; 0V < UCEL < 2V 0mA < ICEH < 0.2 ma; 2mA < ICWL < 5mA *Cotact fuctios (ormally closed, ormally ope) are software selectable. Cotact Iput: The followig fuctios are software selectable: -Exteral Output Cutoff -- all output sigals are tured off. -Exteral Totalizer Reset -- The iteral Totalizer value ca be reset via applicatio of exteral sigal. -Optocoupler, Termials G2 & X1 16V < U < 30V, Ri = 2kW HART Protocol Commuicatios: 1200 Baud usig frequecy shift keyig Maximum cable legth: 5000 ft (1500m). 2
Electro-Magetic Flowmeters Mii-Mag with itegral XE coverter - 10D1475W/Y System Accuracy: Frequecy Output: Flow > 7% of Cal. Factor = ±0.5% of rate Flow < 7% of Cal. Factor = ±0.00035 of Cal. Factor Aalog Output: Same as frequecy output but with a additioal ±0.1% of spa Eclosure Classificatio: Stadard: NEMA 4X (IEC 529, IP65) suitable for idoor or outdoor istallatio. Optioal: Accidetal submergece (IEC 529, IP67) i water up to a depth of 33 feet (10m) for up to 48 hours. Meter Housig: All welded carbo steel costructio with a epoxy fiish Electroics Housig: Epoxy paited cast alumium Electrical Coectios: Cage-clamp termials for wirig ad 1/2 ich NPT iterally threaded coduit fittigs. Meter Weights (lbs) Safety Classificatio: Stadard: Geeral Purpose (No Approvals) Optioal: FM Approved - Noicedive for Class I, Divisio 2, Groups A, B, C & D: Electrodes are itrisically safe for Class I, Divisio 1, Groups A, B, C, & D: Dust-Igitio proof for Class II, Divisio 1, Groups E, F &G: Suitable for Class III, Divisio 1. Optioal: FM Approved - Explosioproof for Class I, Divisio 1, Groups B, C & D: Electrodes are itrisically safe for Class I, Divisio 1, Groups A, B, C & D: Dust-Igitio proof for Class II, Divisio 1, Groups E, F & G: Suitable for Class II, Divisio 1. Meter Size Geeral Purpose & i. mm Cl 1, Div. 2 Meters 1/10 3 7 9 5/32 4 7 9 1/4 6 7 9 3/8 10 7 9 1/2 15 7 9 1 25 8 10 1-1/2 40 9 11 2 50 10 12 3 80 14 16 4 100 20 21 Cl 1, Div. 1 Meters CONFIGURABLE FLOW RANGE: METER 0 TO VALUE SIZE CAPACITY MINIMUM MAXIMUM* Ich mm gpm gpm l/mi gpm l/mi 1/10 3 1.06 0.05 0.20 1.06 4.0 5/32 4 2.12 0.11 0.40 2.12 8.0 1/4 6 5.28 0.26 1.00 5.28 20.0 3/8 10 11.9 0.6 2.25 11.9 45.0 1/2 15 26.4 1.33 5.00 26.4 100.0 1 25 52.8 2.65 10.0 52.8 200.0 1-1/2 40 158.5 7.93 30.0 158 600.0 m 3 /hr m 3 /hr 2 50 264.2 13.3 3.0 264 60.0 3 80 792.5 39.7 9.0 792 180.0 4 100 1057 52.9 12.0 1057 240.0 Flow Velocity (ft/s) = Operatig GPM x 32.81 / Meter Capacity *Maximum values listed are at 10 m/s velocity. TABLE 1. 3
Electro-Magetic Flowmeters Mii-Mag with itegral XE coverter - 10D1475W/Y Model Number Desigatio for the 10D1475W/Y 10D1475 N 2 9 5 1 Desig Level w/50xe Itegral µp coverter 1/10-3/8... Y 1/2-4... W Lier Material Tefzel (ETFE)... N Meter Size - iches (mm) l 1/10 (3)... 01 l 5/32 (4)... 02 l 1/4 (6)... 04 l 3/8 (10)... 06 l 1/2 (15)... 07 1 (25)... 09 1-1/2 (40)... 11 2 (50)... 12 3 (80)... 14 4 (100)... 15 Flage Stadard ad Pressure Ratig ANSI Class 150... P ANSI Class 300... Q Electrode Material Hastalloy C... D Tatalum... F Platium (1/10-3/8 )... M Platium (1/2-4 )... M Electrode Type Flush... 2 Flage Material Flageless Desig w/riveted SST Tag... 9 Safety Classificatio Geeral Purpose... A FM Approved - o-icedive for Cl. I, Div. 2, Groups A,B,C & D: outdoor hazardous locatios, with itrisically safe electrodes... K FM Approved - Explosioproof for Class I, Divisio 1, Groups B, C, ad D... L Power Requiremets 220/230/240 Vac, 50/60 Hz... A 110/115/120 Vac, 50/60 Hz... C 24 Vdc... H Eclosure Classificatio IEC 529 IP65, NEMA 4X... 1 Accidetal Submersio, (IEC 529, IP67, 30 ft./h 2 O/48 h)... 5 Fluid Temperature Rage Stadard (see Specificatio for details)... 1 Output Curret 0-20 ma dc... B 4-20 ma dc (Stadard)... C Output Optios Noe... 1 Commuicatio Mode Noe... 1 HART Protocol... 4 Coil Drive Frequecy 7-1/2 Hz (60 Hz lie frequecy), (Stadard)... 1 6-1/4 Hz (50 Hz lie frequecy)... 2 Additioal Optios Empty Pipe Detector (Eabled)... 1 Empty Pipe Detector (Disabled)... 2 HART Protocol & Empty Pipe Detector (Eabled)... 3 HART Protocol (Disabled)... 4 Moutig Hardware Kit Stadard Kit: Steel bolts & uts, ceterig device, Kliger Sil, C4401 gaskets... C Optioal Kit: Steel bolts & uts, ceterig device, Teflo gaskets... E Not required... X Coverter Required... 1 Not required (Primary oly)... 2 Note: Meters are wafer-style ad clamp betwee customer s pipelie flages. Moutig hardware kit is furished ad icludes: studs, uts, gaskets ad adaptor for the class of selected matig flage. l 1/2 ich a smaller are desiged for use with 1/2 ich size flages Oly for 1/2-ich meter size ad larger ad if coductivity is >50 µsiemes HART is a registered trademark of the HART Commuicatio Foudatio. 4
Electro-Magetic Flowmeters Mii-Mag with itegral XE coverter - 10D1475W/Y METER AND FLANGE SIZES CUSTOMER FLANGE TYPE AND RATING A B C DIA ½ (15) 8-31/32 6-17/32 1-7/8 (228) (166) (48) 1 (25) 9-11/32 6-29/32 2-5/8 ANSI CLASS 150 (237) (175) (67) ANSI CLASS 300 1-1/2 (40) BS 10 TL D.E.F. 9-23/32 7-9/32 3-3/8 DIN PN 10, (247) (185) (86) 2 (50) 16, 25 & 40 10-1/32 7-19/32 4 (255) (193) (102) 3 (80) 10-21/32 (271) 4 (100) 11-5/16 (287) 8-7/32 (209) 8-7/8 (225) 5-1/4 (133) 6-1/2 (165) D 2-5/32 (55) 2-5/32 (55) 2-3/4 (70) 3-11/32 (85) 4-23/32 (120) 5-29/32 (150) NOTES: 1. DIMENSIONS ARE IN INCHES. DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS 2. DIMENSIONS GUARANTEED ONLY IF THIS PRINT IS CERTIFIED 3. ALL DIMENSIONS SUBJECT TO MANUFACTURING TOLERANCE OF +/-1/8 INCH (3mm) 4. METER MUST BE COMPLETELY FILLED WITH LIQUID TO INSURE ACCURACY 5. FLOW MUST BE IN SAME DIRECTION AS FLOW ARROW. 1/2 NPT CONDUIT CONNECTIONS IN HOUSING INDICATE UPSTREAM END OF METER. 6. METER MOUNTS BETWEEN CUSTOMER S PIPELINE FLANGES. TYPES AND RATINGS LISTED IN TABLE OF DIMENSIONS 7. THIS DRAWING IS THIRD ANGLE PROJECTION AS SHOWN 5
Electro-Magetic Flowmeters Mii-Mag with itegral XE coverter - 10D1475W/Y Notes ABB has Sales & Customer Support expertise i over 100 coutries worldwide www.abb.com The Compay s policy is oe of cotiuous product improvemet ad the right is reserved to modify the iformatio cotaied herei without otice. Prited i USA (05.09.03) ABB 2003 ABB Ic. 125 East Couty Lie Road Warmister PA 18974 USA Tel: +1 215 674 6000 Fax: +1 215 674 7183 ABB Ltd Howard Road, St. Neots Cambridgeshire PE19 8EU UK Tel: +44 (0)1480 475321 Fax: +44 (0)1480 217948 ABB Automatio Products GmbH Drasfelder Str. 2. 37079 Goettige Germay Tel: +49 551 905-0 Fax: +49 551 905-777 6