3 Light Pipe Series LPS100, LPS150, and LPS250 Product Bulletin LPS Release A, Effective January 2008 Table of Contents User Information................................................... 2 Product Description................................................. 2 Product Applications................................................ 2 General Information................................................. 2 Product Characteristics.............................................. 3 LPS100 Series................................................. 3 LPS150 Series................................................. 3 LPS250 Series................................................. 3 Safety Information.................................................. 4 Hazardous Voltage Risk........................................... 4 Improper Installation Risk.......................................... 4 High Intensity Light Risk.......................................... 4 Hot Surface Temperature Risk...................................... 4 Supplied Components............................................... 5 Additional Materials Required.......................................... 6 Product Configurations.............................................. 6 How to Read a Light Pipe Description................................. 7 About Colors in the Tables......................................... 7 Storage......................................................... 7 Handling........................................................ 7 Cleaning........................................................ 7 LPS100C Series s with One Light Source........................... 8 LPS100C-A90.............................................. 8 LPS100C-A120............................................. 8 LPS100C-A180............................................. 8 LPS100C-A270............................................. 8 LPS100C-A360R............................................ 8 LPS100C Series s with Two Light Sources........................... 9 LPS100C-A90, LPS100C-A120, LPS100C-A180...................... 9 LPS100C-A270............................................. 9 LPS150C Series s with One Light Source........................... 10 LPS150C-A90.............................................. 10 LPS150C-A120............................................. 10 LPS150C-A180............................................. 10 LPS150C-A270............................................. 10 LPS150C-A360R............................................ 11 LPS150C Series s with Two Light Sources........................... 11 LPS150C-A90.............................................. 11 LPS150C-A120............................................. 11 LPS150C-A180............................................. 11 LPS150C-A270............................................. 11 LPS250C Series s with One Light Source............................ 12 LPS250C-G90.............................................. 12 LPS250C-G120............................................. 12 LPS250C-G180............................................. 12 LPS250C-G270............................................. 13 LPS250C Series s with Two Light Sources........................... 13 LPS250C-G90.............................................. 13 LPS250C-G120............................................. 13 LPS250C-G180............................................. 13 All three series............................................. 13 LPS250C-G270............................................. 14 Warranty........................................................ 14 3M Related Literature............................................... 15
User Information Product Suitability for Use About this Bulletin The user is solely responsible for evaluating and determining whether this 3M product is suitable and appropriate for any particular use or manufacturing process in which it may be used. Technical information, recommendations, and other statements provided by 3M are based on information, tests, or experience which 3M believes to be reliable, but the accuracy or completeness of such information is not guaranteed. Such technical information is intended for persons with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. The typical values shown should not be used for specifications. General Information The information in this Bulletin is subject to change. Be sure you have the most current Bulletin. Call 3M Technical Service at 1-877-891-7806 if you have any questions about the information in this Bulletin. Product Description Product Applications 3M Light Pipe Series LPS100, LPS150 and LPS250 are innovative, modular lighting systems that are designed to distribute light evenly along their entire length. The light pipes are a series of cylindrical, interconnected light distribution modules ranging in length from 4 to 20 meters for LPS250 series and from 8 to 64 feet for LPS100 series and LPS150 series. These modules, called light pipes, are lined with a 3M Optical Lighting Film 2301with unique properties that produce a uniform illumination from a single light source. An extractor strip of 3M Light Enhancement Film 3635-100 diffuses light reflection inside the pipe so that it is uniformly distributed along the entire length of the system. The light pipe diameters for each series are as follows: - LPS100-4 inches (102 mm) - LPS150-6 inches (152 mm) - LPS250-10 inches (254 mm) Each light pipe system is supplied with one or more: - Modular light pipe sections (modules) - Coupling clamps to interconnect the modules The Configuration Charts at the end of this Bulletin show the available product configurations for each series. See Additional Materials Required for a complete list of the components needed to install the light pipe system. These light pipe systems are not supplied with a light source. Consult with your light source manufacturer to select a suitable light source for your light pipe system and its intended application. Read and follow all product safety warnings and procedures as documented in this Bulletin and in the light source manufacturer's manual. The installer is responsible to know and follow all applicable building and electrical codes and workplace regulations. Light pipe series LPS100, LPS150 and LPS250 may be used for a variety of architectural, entertainment, industrial and general lighting applications. Depending on the light source used, possible applications for general interior and exterior lighting include: Open spaces Hallways Swimming pools Warehouses Conference facilities Parking ramps Curtain wall backlighting Note: Light sources are available for a variety of applications, including functional white lighting and static or dynamic lighting colors for decorative purposes. Product Bulletin LPS - 2
Product Characteristics LPS100 Series 4.0 OD (102 mm) x 8 ft (2.45 m) LPS150 Series 6.0 OD (152 mm) x 8 ft (2.45 m) LPS250 Series 10.0 OD (254 mm) x 2 m (6' 6-3/4 ) Characteristic Outer shell Description 0.125 inch (3 mm) wall thickness, UV-stabilized polycarbonate tubing Light management films 3M Optical Lighting Film 2301 3M Light Enhancement Film 3635-100 Light emitting aperture 90, 120, 180, 270, 360 Weight per module 6.83 lbs (3.10 kg) Weight per system 8 feet (16.07 lbs/7.29 kg) to 64 feet (84.54 lbs/38.35 kg) approximate (for LPS Module, 3M couplings, hanger brackets, end cap only; does not include light source) Coupling Silicone in a polycarbonate sleeve Mounting Clamps Cast aluminum End cap Aluminum weldment with mirror film on ABS plastic disk Ingress protection (I.P.) 66 Outer shell 0.125 inch (3 mm) wall thickness, UV-stabilized polycarbonate tubing Light management films 3M Optical Lighting Film 2301 3M Light Enhancement Film 3635-100 Light emitting aperture 90, 120, 180, 270, 360 Weight per module 9.36 lbs (4.25 kg) Weight per system 8 feet (13.60 lbs/6.17 kg) to 64 feet (87.42 lbs/39.65 kg)) approximate (for LPS Module, 3M couplings, hanger brackets, end cap; does not include light source) Coupling Silicone gasket in a polycarbonate sleeve Mounting Clamps Cast aluminum End cap Aluminum weldment with mirror film on ABS plastic disk Ingress protection (I.P.) 66 Outer shell 0.040 (1.02 mm) polycarbonate plastic Light management films 3M Optical Lighting Film 2301 3M Light Enhancement Film 3635-100 Light emitting aperture 90, 120, 180, 270 Weight per module 12.28 lbs (5.6 kg) Weight per system 4 meters (26.71 lbs/12.11 kg) to 20 meters (128.41/58.25 kg lbs) approximate (for LPS Module, 3M couplings, hanger brackets, end cap; does not include light source) Hanger bracket Aluminum Coupling clamp ABS Plastic End cap ABS Plastic Ingress protection (I.P.) 55 Product Bulletin LPS - 3
Safety Information WARNING Hazardous Voltage Risk To reduce the risk of death or serious injury, including shock and burns, or property damage from hazardous voltage: Use only licensed electricians to install and service the electrical components in the lighting system. Comply with all local, state and national electrical and building codes. WARNING Improper Installation Risk To reduce the risk of serious injury or property damage due to the lighting system dislodging from its mounting structure and striking a person or property: Ensure the light pipes are installed with the proper gaps so the couplings can absorb any thermal expansion and contraction of the lighting system. Select suitable anchoring hardware and fastening techniques for the mounting structure. Refer to 3M Instruction Bulletins 7.2 and 7.4 for more information. CAUTION High Intensity Light Risk To reduce the risk of eye damage from high intensity light from the light source or the highly reflective mirrored surface inside the end cap: Never look directly at the bulb or any reflected light from the end cap when the system is energized. Never look directly into the end cap in sunlight or allow any reflected sunlight from the end cap to be directed towards a person's eyes. CAUTION Hot Surface Temperature Risk To reduce the risk of burns from hot surfaces, never touch the surface of the light source when energized. CAUTION When handling any chemical products, read the manufacturers' container labels and the Material Safety Data Sheets (MSDS) for important health, safety and environmental information. To obtain MSDS sheets for 3M products go to 3M.com/MSDS, or by mail or in case of an emergency, call 1-800-364-3577 or 1-651-737-6501. When using any equipment, always follow the manufacturers' instructions for safe operation. Product Bulletin LPS - 4
Supplied Components Note: Items and quantities supplied vary by the length and diameter of the light pipe series you order. FIGURE 1 Light Pipe Module Number FIGURE 2 Collar Clamp LPS250 FIGURE 3 End Cap with Mirror LPS250 The light pipe module transports and distributes light uniformly along its entire length. Each module in a system is individually numbered and must be installed in the proper sequence. The collar clamp secures the LPS250 locking collar connection between light pipe modules. The integral gasket creates a weather-tight seal (IP55) between the modules, light source and end cap to seal out dust, dirt and moisture. One end cap per light pipe system is required. The cap is connected to the inside of a coupling at the end of the system. 3M's fabricated aluminum end cap uses a highly reflective 3M film on the inside surface to redirect light back into the light pipe system. See the label for the module number FIGURE 4 Hanger Bracket LPS250 Two hanger brackets are required per each LPS250 module. FIGURE 5 Coupling LPS100/LPS150 The coupling aligns adjacent light pipe modules and absorbs any thermal expansion and contraction from the modules. Its gasket creates a weather-tight seal (IP 66) between the modules, light source and end cap to seal out dust, dirt and moisture. Product Bulletin LPS - 5
Additional Materials Required FIGURE 6 End Cap LPS100/LPS150 LPS100 and LPS150 do not ship with end caps or mounting clamps: they must be ordered separately from 3M. One end cap per light pipe system is required. The cap is connected at the end of the system. 3M's fabricated aluminum end cap uses a highly reflective 3M film on the inside surface to redirect light back into the light pipe system. FIGURE 7 Mounting Clamp lps100/lps150 One mounting clamp per light pipe module is required for attaching the modules to a structure. 3M's mounting clamps are supplied with a lower and upper clamp half, an O-ring to protect and grip the module and two 1/4-20 x 25-inch screws. LPS100 LPS150 Other Materials Required Light source designed with a 6 inch (15 cm) outer diameter snout that is at least 2 inches (51 cm) in length. Anchoring hardware to attach mounting clamps to a structure. Three anchors are required for each mounting clamp. Select hardware that is appropriate for the structure's surface. Silicone lubricant to ease the installation of the couplings. Use only silicone lubricants; other types of lubricants may attack the plastic and rubber parts. Note: For specific mounting instructions, always refer to the 3M Installation Instructions provided with the light pipe series you are using. Product Configurations The available product configurations for light pipe series LPS100, LPS150 and LPS250 are provided in the tables on the following pages. The light pipe modules supplied for each configuration are individually numbered. Each module has a unique interior design to ensure uniform illumination along the entire length of the lighting system. Therefore, each light pipe module must be installed in sequential order, according to the applicable table, with the lowest number oriented toward the light source. The number of the light pipe module closest to the light source varies according to the length of the system. For example, the LPS150, 32-foot (9.8 m) system has four light pipe modules with number 5 closest to the light source, while a LPS150, 24-foot (7.3 m) system has three modules with number 6 closest to the source. Product Bulletin LPS - 6
How to Read a Light Pipe Description Light Pipe Series LPS 250C G180 20M LPS 150C A360 16FT Diameter 250 mm - 10 150 mm - 6 100 mm - 4 Profile C - Circular Type G - General (LSP250) A - Architectural (LPS150, LPS100) Available Light Emitting Aperture 90, 120, 180, 270 or 360 degree Available System LPS 250 LPS100, LPS150 Meters (Feet, Inches) Feet (meters) 4M (13'2 ) 8FT (2.44 m) 6M (19'8 ) 16FT (4.88 m) 8M (26'3 ) 24FT (7.32 m) 10M (32'3 ) 32FT (9.75 m) 12M (39'4 ) 40FT (12.19 m) 14M (45'11 ) 48FT (14.63 m) 16M (52'6 ) 56FT (17.07 m) 18M (59'0 ) 64FT (19.51 m) 20M (65'7 ) About Colors in the Tables Yellow indicates the light pipes. Red indicates the position of the light source. Storage Store the light pipe system in its original packaging until installation. Store at 50 to 110 F (10 to 43 C) in a clean dry area. Avoid exposing the film on the interior of the light pipe module to direct sunlight or high intensity UV light. Once installed, the outer housing of the module and an appropriate light source filter protect the film. Handling Important Note! Do NOT touch the interior of the light pipe module. The film lining the inside of the module can be easily damaged if it is touched or if dust or moisture is allowed to penetrate the module. Do not remove the protective wrap until immediately before installation. Light Pipes showing signs of handling may not be returned. Cleaning Handle the light pipe modules with care. Although the exterior housing of the light pipe module is rugged and capable of withstanding an impact, it is susceptible to scratching and should be handled accordingly. Important Note! Do NOT clean the interior of the light pipe modules. Do NOT use any cleaning products or solvents. Clean the exterior of the light pipe modules with a soft dry or dampened cloth. Use a soap and water mixture or mild window cleaner. Do not use any abrasive cleanser or solvent cleaning solutions. Wipe dry to prevent possible visible water spots. Product Bulletin LPS - 7
LPS100C Series s with One Light Source Each series includes light pipe modules and couplings. Hanger brackets and end caps must be ordered separately. Standard series are available only in the configurations shown below. Custom lengths are available for an additional cost per cut. IMPORTANT: Follow the module numbering carefully in the following tables. The module numbers are not always sequential (horizontally and/or vertically) and may not start with module 1 nor end with the module you may expect. LPS100C-A90-90 degree light - 4 inch diameter 40 feet 1 2 3 4 5 32 feet 2 3 4 5 24 feet 3 4 5 16 feet 4 5 8 feet 5 LPS100C-A120-120 degree light - 4 inch diameter 40 feet 1 2 3 4 5 32 feet 2 3 4 5 24 feet 3 4 5 16 feet 4 5 8 feet 5 LPS100C-A180-180 degree light - 4 inch diameter 40 feet 1 2 3 4 5 32 feet 2 3 4 5 24 feet 3 4 5 16 feet 4 5 8 feet 5 LPS100C-A270-270 degree light - 4 inch diameter Module Configuration 24 feet 1 2 3 16 feet 2 3 8 feet 3 LPS100C-A360R - 360 degree light with decorative ring (R) pattern - 4 inch diameter - Uses Module 1 only Module Configuration 24 feet 1 1 1 16 feet 1 1 8 feet 1 Product Bulletin LPS - 8
LPS100C Series s with Two Light Sources For dual light sources, configure by installing two single source light pipe series as one light pipe system. Each series includes light pipe modules and couplings. Mounting clamps must be ordered separately. End caps are not required in dual light source configurations. Standard series are available only in the configurations shown below. Custom lengths are available for an additional cost. IMPORTANT: Follow the module numbering carefully in the following tables. The module numbers are not always sequential (horizontally and/or vertically) and may not start with module 1 nor end with the module you may expect. LPS100C-A90 LPS100C-A120 LPS100C-A180-90, 120 or 180 degree light emitting window - 4 inch diameter - Two light sources LPS100C-A270-90, 120 or 180 degree light emitting window - 4 inch diameter - Two light sources 80 feet 1 2 3 4 5 5 4 3 2 1 64 feet 2 3 4 5 5 4 3 2 48 feet 3 4 5 5 4 3 32 feet 4 5 5 4 16 feet 5 5 48 feet 1 2 3 3 2 1 32 feet 2 3 3 2 16 feet 3 3 Product Bulletin LPS - 9
LPS150C Series s with One Light Source Each series includes light pipe modules and couplings. Hanger brackets and end caps must be ordered separately. Standard series are available only in the configurations shown below. Custom lengths are available for an additional cost IMPORTANT: Follow the module numbering carefully in the following tables. The module numbers are not always sequential (horizontally and/or vertically) and may not start with module 1 nor end with the module you may expect. LPS150C-A90-90 degree light - 6 inch diameter 64 feet 1 2 3 4 5 6 7 8 56 feet 2 3 4 5 6 7 8 48 feet 3 4 5 6 7 8 40 feet 4 5 6 7 8 32 feet 5 6 7 8 24 feet 6 7 8 16 feet 7 8 8 feet 8 LPS150C-A120-120 degree light - 6 inch diameter 64 feet 1 2 3 4 5 6 7 8 56 feet 2 3 4 5 6 7 8 48 feet 3 4 5 6 7 8 40 feet 4 5 6 7 8 32 feet 5 6 7 8 24 feet 6 7 8 16 feet 7 8 8 feet 8 LPS150C-A180-180 degree light - 6 inch diameter 64 feet 1 2 3 4 5 6 7 8 56 feet 2 3 4 5 6 7 8 48 feet 3 4 5 6 7 8 40 feet 4 5 6 7 8 32 feet 5 6 7 8 24 feet 6 7 8 16 feet 7 8 8 feet 8 LPS150C-A270-270 degree light - 6 inch diameter 32 feet 3 4 5 6 24 feet 4 5 6 16 feet 5 6 8 feet 6 Product Bulletin LPS - 10
LPS150C-A360-360 degree light with decorative ring (R) pattern - 6 inch diameter 32 feet 1 1 1 1 24 feet 1 1 1 16 feet 1 1 8 feet 1 LPS150C Series s with Two Light Sources For dual light sources, configure by installing two single source light pipe series as one light pipe system. Each series includes light pipe modules and couplings. Mounting clamps must be ordered separately. End caps are not required in dual light source configurations. Standard series are available only in the configurations shown below. Custom lengths are available for an additional cost. IMPORTANT: Follow the module numbering carefully in the following tables. The module numbers are not always sequential (horizontally and/or vertically) and may not start with module 1 nor end with the module you may expect. LPS150C-A90 LPS150C-A120 LPS150C-A180-90, 120 or 180 degree light emitting window - 6 inch diameter - Two light sources 128 feet 1 2 3 4 5 6 7 8 8 7 6 5 4 3 2 1 112 feet 2 3 4 5 6 7 8 8 7 6 5 4 3 2 96 feet 3 4 5 6 7 8 8 7 6 5 4 3 80 feet 4 5 6 7 8 8 7 6 5 4 64 feet 5 6 7 8 8 7 6 5 48 feet 6 7 8 8 7 6 32 feet 7 8 8 7 16 feet 8 8 LPS150C-A270-270 degree light - 6 inch diameter - Two light sources 64 feet 3 4 5 6 6 5 4 3 48 feet 4 5 6 6 5 4 32 feet 5 6 6 5 16 feet 6 6 Product Bulletin LPS - 11
LPS250C Series s with One Light Source Each series includes light pipe modules and coupling clamps, hanger brackets and end caps. Standard series are available only in the configurations shown below. LSP250C series modules are not available in custom lengths. IMPORTANT: Follow the module numbering carefully in the following tables. The module numbers are not always sequential (horizontally and/or vertically) and may not start with module 1 nor end with the module you may expect. Note: LSP250C series modules are not available in 360 degree light emitting aperture. LPS250C-G90-90 degree light - 10 inch diameter - 2 meter modules 20 m 1 2 3 4 5 6 7 8 9 10 18 m 2 3 4 5 6 7 8 9 10 16 m 3 4 5 6 7 8 9 10 14 m 5 6 7 8 9 10 11 12 m 6 7 8 9 10 11 10 m 7 8 9 10 11 8 m 9 10 11 12 6 m 10 11 12 4 m 11 12 LPS250C-G120-120 degree light - 10 inch diameter - 2 meter modules 20 m 1 2 3 4 5 6 7 8 9 10 18 m 2 3 4 5 6 7 8 9 10 16 m 3 4 5 6 7 8 9 10 14 m 5 6 7 8 9 10 11 12 m 6 7 8 9 10 11 10 m 7 8 9 10 11 8 m 9 10 11 12 6 m 10 11 12 4 m 11 12 LPS250C-G180-180 degree light - 10 inch diameter - 2 meter modules 20 m 1 2 3 4 5 6 7 8 9 10 18 m 2 3 4 5 6 7 8 9 10 16 m 3 4 5 6 7 8 9 10 14 m 5 6 7 8 9 10 11 12 m 6 7 8 9 10 11 10 m 7 8 9 10 11 8 m 9 10 11 12 6 m 10 11 12 4 m 11 12 Product Bulletin LPS - 12
LPS250C-G270-270 degree light - 10 inch diameter - 2 meter modules 20 m 1 2 3 4 5 6 7 8 9 10 18 m 2 3 4 5 6 7 8 9 10 16 m 3 4 5 6 7 8 9 10 14 m 4 5 6 7 8 9 10 12 m 5 6 7 8 9 10 10 m 6 7 8 9 10 8 m 7 8 9 10 6 m 8 9 10 4 m 9 10 LPS250C Series s with Two Light Sources Each series includes light pipe modules and coupling clamps, hanger brackets and end caps. Standard series are available only in the configurations shown below. IMPORTANT: Follow the module numbering carefully in the following tables. The module numbers are not always sequential (horizontally and/or vertically) and may not start with module 1 nor end with the module you may expect. Note: LSP250C series are not available in 360 degree light emitting aperture. LPS250C-G90-90 degree light LPS250C-G120-120 degree light LPS250C-G180-180 degree light All three series - 10 inch diameter - 2 meter modules - Two light sources 1 of 2 40 m 1 2 3 4 5 6 7 8 9 10 10 9 8 7 6 5 4 3 2 1 36 m 2 3 4 5 6 7 8 9 10 10 9 8 7 6 5 4 3 2 32 m 3 4 5 6 7 8 9 10 10 9 8 7 6 5 4 3 28 m 5 6 7 8 9 10 11 11 10 9 8 7 6 5 24 m 6 7 8 9 10 11 11 10 9 8 7 6 20 m 7 8 9 10 11 11 10 9 8 7 16 m 9 10 11 12 12 11 10 9 12 m 10 11 12 12 11 10 8 m 11 12 12 11 2 of 2 (MM = Middle Module) 38 m 2 3 4 5 6 7 8 9 10 11MM 10 9 8 7 6 5 4 3 2 34 m 3 4 5 6 7 8 9 10 11MM 10 9 8 7 6 5 4 3 30 m 5 6 7 8 9 10 11 12MM 11 10 9 8 7 6 5 26 m 6 7 8 9 10 11 12MM 11 10 9 8 7 6 22 m 7 8 9 0 11 12MM 11 10 9 8 7 18 m 9 10 11 12 13MM 12 11 10 9 14 m 10 11 12 13MM 12 11 10 10 m 11 12 13MM 12 11 Product Bulletin LPS - 13
LPS250C-G270-270 degree light - 10 inch diameter - 2 meter modules - Two light sources 1 of 2, LPS250C-G270 40 m 1 2 3 4 5 6 7 8 9 10 10 9 8 7 6 5 4 3 2 1 36 m 2 3 4 5 6 7 8 9 10 10 9 8 7 6 5 4 3 2 32 m 3 4 5 6 7 8 9 10 10 9 8 7 6 5 4 3 28 m 4 5 6 7 8 9 10 10 9 8 7 6 5 4 24 m 5 6 7 8 9 10 10 9 8 7 6 5 20 m 6 7 8 9 10 10 9 8 7 6 16 m 7 8 9 10 10 9 8 7 12 m 8 9 10 10 9 8 8 m 9 10 10 9 2 of 2, LPS250C-G270 (MM = Middle Module) 38 m 2 3 4 5 6 7 8 9 10 11MM 10 9 8 7 6 5 4 3 2 34 m 3 4 5 6 7 8 9 10 11MM 10 9 8 7 6 5 4 3 30 m 4 5 6 7 8 9 10 11MM 10 9 8 7 6 5 4 26 m 5 6 7 8 9 10 11MM 10 9 8 7 6 5 22 m 6 7 8 9 10 11MM 10 9 8 7 6 18 m 7 8 9 10 11MM 10 9 8 7 14 m 8 9 10 11MM 10 9 8 10 m 9 10 11MM 10 9 Warranty Information Limitation of Warranty 3M warrants to its customer and to the final owner/end user ( Purchaser") that 3M Light Pipes ( products") will be free from defects in material and will conform to published specifications for a period of two years from the date of shipment. Purchaser's failure to make a warranty claim within the two-year period shall constitute Purchaser's irrevocable acceptance of the products and Purchaser's acknowledgement that the products fully comply with the terms and conditions of any purchase agreement and any published specifications for the products. If Purchaser discovers an alleged breach of this warranty, Purchaser shall contact 3M for written authorization to return the applicable product(s). 3M shall repair or replace any products proved to violate this warranty. If repair or replacement is not possible, 3M shall refund to Purchaser the amount paid to 3M by 3M's immediate customer for the affected product(s). Warranty claims must be received by 3M within the warranty period. 3M shall not be responsible for, and this warranty does not cover, the lighting luminaire, nor does it cover defects in product(s) caused by accident, misuse, neglect, mishandling, alteration or the physical environment. This warranty is available only if Purchaser has installed, used and maintained the products according to 3M's instructions. This warranty does not cover the efficiency of the light pipe system. Light output reductions due to dirt accumulation or lamp deterioration are not covered by this warranty. Lamps, ballasts and other associated lamp hardware carry the manufacturer's standard warranty and are not covered by this warranty. 3M replacement products shall carry the unexpired warranty term of the products they replace. All statements, technical information and recommendations contained in this warranty and in 3M's product literature are based on tests 3M believes to be reliable. 3M does not warrant the accuracy of completeness of this information. 3M reserves the right to change, at any time and without prior notice, the technical specifications of its Light Pipe products. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING OR PERFORMANCE OR ANY CUSTOM OF USAGE OF TRADE, EXCEPT FOR THE IMPLIED WARRANTIES OF TITLE AND AGAINST PATENT INFRINGEMENT. Product Bulletin LPS - 14
Limited Remedy Limitation of Liability 3M Related Literature IF ANY PRODUCT IS PROVED TO VIOLATE THIS WARRANTY, 3M'S ENTIRE LIABILITY AND PURCHASER'S EXCLUSIVE REMEDY WILL BE FOR 3M, AT 3M'S OPTION, TO EITHER: (A) REPAIR OR REPLACE THE PRODUCT(S), OR (B) REFUND TO PURCHASER THE AMOUNT PAID TO 3M BY 3M'S IMMEDIATE CUSTOMER FOR THE AFFECTED PRODUCT(S). 3M does not assume liability for any additional costs such as lost production time, labor to remove or reapply products, or replacement of non-3m materials. 3M SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, REVENUE OR BUSINESS RESULTING FROM OR IN ANY WAY RELATED TO THE PRODUCTS OR TO THIS WARRANTY. This limitation applies regardless of whether the damages are sought based on breach of warranty, breach of contract, negligence, strict liability in tort, or any other legal theory. If Purchaser has been authorized by 3M to resell the products and if Purchaser offers to its customers express or implied warranties or remedies which differ from those stated above, Purchaser agrees to assume full responsibility for all liability, loss, cost and expense arising out of different warranties and/or remedies offered by Purchaser. This limited warranty and its associated remedies and limitations may not be modified or supplemented except by and agreement signed by officers of Purchaser and 3M. Before starting any job, be sure you have the most current Product and Instruction Bulletins. The information in 3M Product and Instruction Bulletins is subject to change. For a current copy of this Bulletin, contact Technical Service at 1-877-891-7806. Any warranty, if offered, is based on information in the appropriate Bulletin(s) that was current at the time you purchased the 3M products. The following applicable Bulletins provide information and processes you need to properly use the products described in this Bulletin. Subject Type Bulletin No. Bulletin types: PB = Product Bulletin; PB-IB = Product & Instruction Bulletin; IB = Instruction Bulletin Installation Bulletin - Light Pipe Series LPS150 IB 7.2 Installation Bulletin - Light Pipe Series LPS250 IB 7.4 3M is a trademark of 3M. Light Management Solutions from Commercial Graphics Division 3M Center, Building 220-12E-04 PO Box 33220 St. Paul, MN 55144-3220 USA Technical Info. 1-877-891-7806 www.3m.com/lightingproducts 3M 2008. All rights reserved. Product Bulletin LPS - 15