VDE JQ HIGH ELECTRICAL & MECHANICAL NOISE IMMUNITY RELAY JQ RELAYS.77.39.. mm inch FEATURES High electrical noise immunity High switching capacity in a compact package High sensitivity: mw (a), mw () High surge voltage:, V between contacts and coil UL, CSA, VDE, TÜV, SEMKO approved Class B coil insulation type available About Cd-free contacts We have introduced cadmium-free type products to reduce environmentally hazardous substances. Please replace parts that contain cadmium with Cd-free products. Evaluate them with your actual application before use because the life of a relay depends on the contact material and load. SPECIFICATIONS Contact Arrangement Initial contact resistance, max. (By voltage drop V DC A) Contact material Expected electrical life (min. operations) Type Switching capacity No. of operations Coil (at C F) switching capacity Form A, Form C mω AgSnO type a A V AC, A V AC, A 3 V DC A V AC, A V AC, A 3 V DC A V AC, A V AC, 3 A 3 V AC A V AC, A V AC, A 3 V DC A V AC, A V AC, A 3 V DC 3 A V AC, A V AC, A 3 V DC a VA, W, VA, W Rating switching power VA, 9 W, V AC, W (resistive) VA, 3 W V AC, 3 W switching voltage V AC, V DC (.3A) switching current : A : A : A : 3 A switching capacity # ma, V DC Expected mechanical life (at cpm)(min. operations) 7 a a A V AC 3 A V AC A V AC A 3 V DC A V AC A V AC 3 A 3 V DC A V AC A V AC A 3 V DC A V AC A V AC A 3 V DC A V AC A V AC A 3 V DC 3 A V AC A V AC A 3 V DC # This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. operating power a: mw : mw ds en_jq: D
Characteristics operating speed Initial insulation resistance* Remarks * Specifications will vary with foreign standards certification ratings. * Measurement at same location as Initial breakdown voltage section * Detection current: ma * 3 Wave is standard shock voltage of ±. μs according to JEC--9 * Excluding contact bounce time * Measured conditions Resistive, applied to the coil. Contact carrying current: A, at 7 C F Resistive, applied to the coil. Contact carrying current: A, at 7 C F * Half-wave pulse of sine wave: ms; detection time: μs * 7 Half-wave pulse of sine wave: ms * Detection time: μs * 9 Refer to. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (p. 9, Relay Technical Information). * When using relays in a high ambient temperature, consider the pick-up voltage rise due to the high temperature (a rise of approx..% V for each C 33. F with C F as a reference) and use a coil impressed voltage that is within the maximum allowable voltage range. TYPICAL APPLICATIONS Air conditioners Refrigerators Microwave ovens Heaters cpm, MΩ at V DC a:, Vrms for min. Between open contacts Initial breakdown voltage* : 7 Vrms for min. Between contacts and coil, Vrms for min. Surge voltage between contact and coil* 3, V * (at ) ms * (at )(without diode) ms Temperature rise* C Shock resistance Vibration resistance Functional* Destructive Conditions for operation, transport and storage* 9 Ambient temp.* (Not freezing and condensing at low temperature) Humidity Unit weight Functional* 9 m/s {3 G} Destructive* 7 9 m/s { G} 9 m/s { G}, to Hz at double amplitude of. mm 7. m/s { G}, to Hz at double amplitude of. mm C to + C F to + F to % R.H. Approx. 7 g. oz ORDERING INFORMATION Ex. JQ a P B V F Contact arrangement Contact capacity Coil insulation class Coil voltage (DC) Contact material a: Form A : Form C Nil: Standard P: High capacity Nil: Class E coil insulation B: Class B coil insulation,, 9,,,, * V F: AgSnO type UL/CSA, VDE, SEMKO approved type is standard. * Available only for Form C type ds en_jq: D
TYPES AND COIL DATA at C F Form A Form C Part No. DIMENSIONS Pick-up (min.) Drop-out (min.) operating current, ma JQa-V-F 3.7. operating power, mw Coil resistance, Ω (±%) JQa-V-F..3 33.3 JQa-9V-F 9.7.. JQa-V-F 9..7 7 JQa-V-F 3..9., JQa-V-F..3, JQaP-V-F. JQaP-V-F..3 33.3 JQaP-9V-F 9 7... JQaP-V-F 9...7 7 JQaP-V-F..9., JQaP-V-F 9...3, JQ-V-F 3.7.. JQ-V-F..3.7 9 JQ-9V-F 9.7... JQ-V-F 9. 33.3 3 JQ-V-F 3..9. JQ-V-F..7, JQ-V-F 3..3,7 JQP-V-F.. JQP-V-F..3.7 9 JQP-9V-F 9 7.... JQP-V-F 9.. 33.3 3 JQP-V-F..9. JQP-V-F 9...7, JQP-V-F 3...3,7 Form A.39.77 Schematic (Bottom view) Form A Form C COM JQ allowable % of (at C F) 3% of (at C F) % of (at C F) % of (at C F) COM mm inch.. Coil Coil...3 Form C... dia.. dia....3..3.3..3..3 PC board pattern (Bottom view) Form A FormC.39.77...3 -.3 dia. -. dia....3 -.3 dia. -. dia....3.3.3..... dia.. dia....3......3..3. Dimension : General tolerance mm.39 inch ±. ±. to mm.39 to. inch ±.3 ±. mm. inch ±. ±..3..3 Tolerance: ±. ±. ds en_jq: D 3
REFERENCE DATA switching capacity ( Form A type) switching capacity ( Form C type) () () 77, Contact voltage, V 3 () side () side () side () side 77, Contact voltage, V -(). Operate & release time ( Form A type) Tested sample: JQa-V-F, pcs. -(). Operate & release time ( Form C type) Tested sample: JQ-V-F, pcs.. Life curve Ambient temperature: room temperature Life, V V 3 3-(). Coil temperature rise ( Form A type) 3-(). Coil temperature rise ( Form C type) 7 3 3 A at C A at 7 C 3 A at 7 C 3 3 A at 7 C A at 7 C 3 A at C 3 7 9 3 -(). Ambient temperature characteristics ( Form A type) Tested sample: JQa-V-F 3 3 7 9 -(). Ambient temperature characteristics ( Form C type) Tested sample: JQ-V-F 3 3 7 9 Allowable ambient temperature against set as 3 C F) (Carrying current: 3 A) Allowable ambient temperature against set as 3 C F) (Carrying current: A) 3 Allowable ambient temperature against set as C 39 F) (Carrying current: 3 A) Allowable ambient temperature against set as C 39 F) (Carrying current: A) Pick-up voltage with a hot-start condition of %V on the coil (Carrying current: A) Pick-up voltage with a hot-start condition of %V on the coil (Carrying current: 3 A) 7 Pick-up voltage ds en_jq: D
-(). Operate & release time ( Form A type) Tested sample: JQaP-V-F, pcs. -(). Operate & release time ( Form C type) Tested sample: JQP-V-F, pcs.. Life curve Ambient temperature: room temperature Life, V V 3-(). Coil temperature rise ( Form A type) Contact carrying current: A, A 3-(). Coil temperature rise ( Form C type) Contact carrying current: A, A 7 3 A at C A at 7 C A at 7 C 7 3 A at C A at 7 C A at 7 C 3 -(). Ambient temperature characteristics ( Form A type) Tested sample: JQaP-V-F Contact carrying current: A, A 3 3 7 9 -(). Ambient temperature characteristics ( Form C type) Tested sample: JQP-V-F Contact carrying current: A, A 3 3 7 9 Allowable ambient temperature against set as 3 C F) (Carrying current: A) Allowable ambient temperature against set as 3 C F) (Carrying current: A) 3 Allowable ambient temperature against set as C 39 F) (Carrying current: A) Allowable ambient temperature against set as C 39 F) (Carrying current: A) Pick-up voltage with a hot-start condition of %V on the coil (Carrying current: A) Pick-up voltage with a hot-start condition of %V on the coil (Carrying current: A) 7 Pick-up voltage For Cautions for Use, see Relay Technical Information. ds en_jq: D