GUXW Mini-Breakout Cables (Distribution) Universal Indoor/ Outdoor, Steel Wire Armor (SWA) A/I-VQ(ZN)HBH Full Rodent Protection 05--0 v5.0 Ordering Information Belden Part Numbers Fibre Description / count 4 6 8 6.5/5-OM GUXW04 GUXW06 GUXW08 GUXW 50/5-OM BI GUXW04 GUXW06 GUXW08 GUXW 50/5-OM3 BI GUXWD04 GUXWD06 GUXWD08 GUXWD 50/5-OM4 BI GUXWE4 GUXWE06 GUXWE08 GUXWE 9/5 ITU G.657A BI GUXWA04 GUXWA06 GUXWA08 GUXWA 9/5 ITU G.657A BI GUXWF04 GUXWF06 GUXWF08 GUXWF 9/5 ITU G.657B3 BI GUXWI04 GUXWI06 GUXWI08 GUXWI Std. plywood reel (non-returnable) Std. delivery length Ø800*475mm 7.65 kg 00 ± 05m Ø000*530mm 8 kg Applications Structured (premises) wiring systems: campus and/or building backbone (riser) and/or horizontal cabling. Support all computer network applications such as FDDI, Gigabit Ethernet and ATM. Easy to install in ducts, tunnels and trenches. Not recommended for direct burial. Features & Benefits These cables are halogen-free (= FRNC and LSNH) and watertight and therefore suitable for internal and external use. Consequently splicing can be avoided and the installation gets more cost-effective. High mechanical and full rodent protection provided by Steel Wire Armor (SWA). Predicted lifetime > 30 years.
Construction & Dimensions Cable Specifications (construction in accordance with IEC 60794). Swellable reinforced glassyarns as common strength members and for the longitudinal watertightness.. Primary coated optical fibres: Ø 80 ± 5 um. 3. Tight buffered fibres: Ø 0.9 ± 0.05 mm. Colour coding of the buffered fibres: white red blue yellow green violet brown black orange turquoise pink grey The fibres 3 4 are ringmarked. 4. Swellable glassyarns for longitudinal watertightness. 5. Halogen-free inner jacket. 6. Steel Wire Armouring (SWA): helical stranded galvanized steel wires of Ø 0.9 mm 7. Black halogen-free (FRNC/LSNH) outer jacket. Identification: BELDEN OFC cable type number x type of fibre + date-, meter- and. Mechanical Data No. of fibres 4 6 8 Ø nom. (mm) 0.8.. 4.0 Max. pulling tension (N) Short term 30 460 50 330 Energy of flame (kj/m) 05 50 77 746 Weight (kg/km) 3 46 5 33
Optical Characteristics Characteristics Single-Mode Matched-Cladded optical fibres according to ITU. Fibre-Type Mode-Field /Cladding Diameter (um) Attenuation B typical/ max. (db/km)) Dispersion (ps/(nm-km) PMD A (ps/km) Cable Cut-off A 9/5 G.657A BI 8.9 ± 0.4 4.8 ± 0.3 30 65 0.34 / 0.35 0.9 / 0 / 4 3.5 8 0.06 60 F 9/5 G.657A BI 8.9 ± 0.4 4.8 ± 0.3 30 65 0.34 / 0.35 0.9 / 0 / 4 3.5 8 0.06 60 I 9/5 G.657B3 BI 8.8 ± 0.4 5 ± 0.4 30 65 0.34 / 0.35 0.9 / 0 / 3 3.5 8 0.06 60 Note A- Link design value Note B- Due to cabling the optical attenuation values can increase with max 0.5 db/km (30 nm), max. 0.09 db/km ( nm) and max. 7 db/km (65 nm) Characteristics Multi-Mode Graded-Index optical fibres according to IEC 60793 Fibre- Type Core/ Cladding Diameter (um) Attenuation C typical/ max. (db/km)) Bandwidth (MHzkm) Ethernet Performance (m) GBE 0 GBE Num. Apert. (µm) 6.5/5 OM 6.5 ±.5 5 ±.7 / 3.0 0.7 / 0.8 00 600 0 33 75 ± 0.05 50/5 OM BI 50 ±.5 5 ±.3 /.5 / 0.6 600 600 83 0 ± 0.05 D 50/5 OM3 BI 50 ±.5 5 ±.3 /.5 / 0.6 000 0 ± 0.05 E 50/5 OM4 BI 50 ±.5 5 ±.3 /.5 / 0.6 3500 00 0 ± 0.05 Note C- Due to cabling the optical attenuation values can increase with max. 0.4 db/km 3
Macro Bending Performance Fibers Maximum attenuation increase for Bend Insensitive Single Mode fibers in db depending on turns and radius. Fibre-Type 00 5 mm 0 5 mm Turn 0 mm Turn 7.5 mm Turn 5 mm ) A 9/5 G.657A 65 0.0 0.05 F 9/5 G.657A 65 0.03 0. 0..0 I 9/5 G.657B3 65 0.03 0.0 0.08 5 0.5 0.45 Maximum attenuation increase for Bend Insensitive Multi Mode fibers in db depending on turns and radius. Fibre-Type 6.5/5 OM 00 37.5 mm 5 mm ) 7.5 mm 50/5 OM BI 0. 0.3 D 50/5 OM3 BI 0. 0.3 E 50/5 OM4 BI 0. 0.3 4
Mechanical, Physical and/or Environmental Characteristics Description: Tested according to: Requirement: According to Family specification: Storage Temperature Range IEC 60794---F -30 to +70 C IEC 60794--0 Installation Temperature Range -5 to +50 C Operating Temperature Range -30 to +70 C Strippability Secondary coating only 0 cm Secondary + primary coating 0 mm Bending radii for fibres and tight buffers Installation/operation For Bend Insensitive fibres >5 mm See Optical Characteristics Cable Core Water Blocking IEC 60794---F5 Pass Cable Min. Bend Operation (Long Term) IEC 60794---E 5 x Cable Diam. IEC 60794--0 Cable Min. Bend Installation (Short Term) IEC 60794---E6 0 x Cable Diam. Cable Max. Tensile Strength Operation (Short Term) IEC 60794---E See table with dimensions IEC 60794--0 Cable Max. Crush Resistance Operation (Long Term) Cable Max. Crush Resistance Installation (Short Term) IEC 60794---E3 8 kn/m 0 kn/m IEC 60794--0 Safety Testing standard Description / Value Reaction to fire IEC 6033- IEC 6033-3- Smoke density IEC 6034- Halogen acid gas content IEC 60754- Zero Degree of acidity of gases IEC 60754- Min. 4.3 ph IEC 60754- Max. 0 µs/mm 5
Guide to installation and handling When laying and installing optical fibre cables it is vitally important not to exceed the specified values set for pulling tension, bending radii and temperature. The installation methods have to be in accordance with the common standards. To ease insertion into tubes certified lubricants (e.g. paraffin) may be used. The use of soap or similar substances as lubricants is strictly prohibited. If a cable needs to be fastened, constrictions > 0.3 mm must be prevented. It is advisable to cap the cable-ends during storage. Options Non-standard cable constructions with standard rodent protection, colours, details and/or additional information regarding specifications are available on request. 6