High Speed Cable Assemblies

High Speed Cable Assemblies Data Rate Cable Assemblies s.................................. 4-9 Data Rate Coax & Twinax Cable Assemblies DataRay High Density Cable Assemblies Custom Data Rate Cable Capabilities Data Rate Cable Specifications High Speed I/O Cable Assemblies semblies................................ 10 V-Port Cable Assemblies HDMI Cable Assemblies Edge Rate Cable Assemblies AccliMate Cable Systems........................................ 11 IP68 Sealed Circular Ethernet, USB, RF Assemblies Field Termination kits Custom & Application Specific Sealed Circular Assemblies RF Cable Assemblies es.......................................... 12-14 Complete RF Cable Assemblies Unique RF Cable Assemblies Custom RF Cable Assemblies High Speed Flex.................................................... 15 Standard High Speed Flex High Speed Data Links & Edge Card ZIF Flex Jumpers Design / Build Capabilities BOARD-TO-BOARD Interconnect Solutions Samtec offers a full line of interconnect solutions for Signal Integrity, Rugged and Micro applications, with the unique ability to weave products together for mix and match solutions for custom applications. CABLE ASSEMBLIES PANEL AND I/O S U D D E N S E R I V C E 2

Signal Integrity Services Signal Integrity Center Online support and reference for selection, development, simulation and testing of high speed systems for any application. User friendly website High speed connector simulations, models, reports, drawings and searches SPICE, IBIS models High speed characterization reports Time and frequency domain test data Bandwidth Performance Selector and Interactive Cable Builders Application notes: reference designs that verify performance to industry standards Signal Integrity Group Personal SI support for questions that cannot be answered via the Signal Integrity Center. EE customer interface via in-house staff Design, modeling and testing of sub-systems Application Specific Services for design, modeling and testing of full or sub-system Samtec involvement available at various levels Specific services tailored to your needs and products Extensive modeling, simulation and testing capabilities Final Inch PCB Design Tools Reference designs that save design, development and validation time and resources Models of connector components with Samtec recommended Final Inch PCB trace routing to the connector Downloadable art files and HSPICE simulations Test and evaluation kits Empirical signal integrity data On-Request test data Contact Us! For assistance with Signal Integrity Capabilities, contact sig@samtec.com Data Rate Cables, contact hdr@samtec.com RF Cable Systems, contact rf@samtec.com High Speed Flex, contact flexcircuits@samtec.com Custom & Application Specific Cables, contact asp@samtec.com 3

Data Rate Cable Assemblies Coax Data Rate Cable 38 AWG ribbon coax cable 50Ω & 75Ω signal routing 0,5mm, 0,635mm and 0,8mm pitch Vertical or edge mount termination to cable Ideal for longer cable assemblies (6" to 40") 50Ω or 75Ω signal routing Screw downs available 38 AWG 50Ω coax High speed connectors Coax Data Rate Cable Assemblies Rated @ -3dB Insertion Loss SERIES EQCD HQCD MICD HBCD PITCH 0,8 mm 0,5 mm 0,635 mm 0,5 mm MATES QTE/QSE QTH/QSH MIS/MIT BTH/BSH 12" (304,8mm) 1.42 GHz / 2.82 Gbps 1.16 GHz / 2.32 Gbps 801 MHz / 1.60 Gbps 2.01 GHz / 4.02 Gbps 19.68" (0,5m) 900 MHz / 1.80 Gbps 740 MHz / 1.48 Gbps 648 MHz / 1.29 Gbps 1.60 GHz / 3.20 Gbps 39.37" (1m) 480 MHz / 0.96 Gbps 390 MHz / 0.78 Gbps 400 MHz / 0.80 Gbps 586 MHz / 1.17 Gbps Board-to-Board Coax Data Rate Cable 38 AWG ribbon coax cable 50Ω signal routing Header or socket termination Vertical or edge mount.050" (1,27mm), 2mm (.079") and.100" (2,54mm) pitch.050" (1,27mm) pitch with high reliability Tiger Eye Contact.100" (2,54mm) pitch is JTAG (IEEE 1149.1) compatible High cable flexing life (> 40,000 cycles) Ideal for longer cable assemblies (6" to 40") 38 AWG 50Ω coax Vertical or edge mount Coax Data Rate Cable Assemblies Rated @ -3dB Insertion Loss SERIES FHSC THSC HHSC PITCH 1,27 mm 2 mm 2,54 mm MATES SFM/TFM SQW/TMMH SSW/TSW 10" (254mm) 175 MHz / 0.35 Gbps 175 MHz / 0.35 Gbps 400 MHz / 0.8 Gbps Headers or sockets Visit www.samtec.com /cable_builder for our Interactive Cable Builder program! 4

Twinax Data Rate Cable 30 AWG ribbon twinax cable 100Ω Differential Pair signal routing Choice of terminations: - Edge card - High speed connectors on 0,5mm, 0,635mm and 0,8mm pitch - Shielded High Speed Connectors on 0,635mm pitch Vertical or edge mount termination to cable Locking & Latching options Shielded and unshielded versions Optional screw downs Low skew (pair-to-pair < 10 ps/ft; within a pair < 5ps/ft ) Superior EMI Performance (FCC Class A) Contact hdr@samtec.com for custom Signal Integrity specifications 30 AWG 100Ω twinax High speed connectors Latching and screw systems available Edge Card Twinax Data Rate Cable Assemblies Rated @ -3dB Insertion Loss SERIES EQDP HQDP EEDP 6QDPS PITCH 0,8 mm 0,5 mm 0,8 mm 0,635 mm MATES QTE-DP/QSE-DP QTH-DP/QSH-DP HSEC8 QMSS-DP/QFSS-DP 12" (304,8mm) 4.74 GHz / 9.48 Gbps 2.12 GHz / 4.24 Gbps N/A 1.86 GHz / 3.72 Gbps 19.68" (0,5m) 4.46 GHz / 8.92 Gbps 1.64 GHz / 3.28 Gbps 2.85 GHz / 5.70 Gbps 1.58 GHz / 3.16 Gbps 39.37" (1m) 1.59 GHz / 3.18 Gbps 1.37 GHz / 2.74 Gbps 1.15 GHz / 2.30 Gbps 1.25 GHz / 2.50 Gbps DataRay High Density Cable Assemblies Currently in design contact Samtec for more information 30 AWG 100Ω Data Rate twinax cable Optimizes Signal Integrity with no transition board between cable and contacts Surface Mount or Panel Mount orientations Socket or terminal end connector options 8 pairs per chicklet; 4 chicklets per bank Choice of 1 or 2 banks, for a total of 32 or 64 pairs Bank holders with Finger Actuated Locking Clips Combination Guide Pin/Locking Posts (solders to PCB) Mating Surface Mount Terminal (GCAM Series) Mounting Blocks for Right Angle applications also available Signal clip Conductor Dielectric Shield Ground clip Insulator Patent Pending Grounds Contacts Shielded or unshielded Surface Mount or Panel Mount Mounting Blocks for Right Angle applications Finger actuated locking clips Pin 02 Pin 01 Socket or terminal end connector options Combination Guide Pin/ Locking Posts 30 AWG 100Ω Data Rate twinax cable Gnd 02 Gnd 01 5

Custom Data Rate Cable Capabilities Breakouts to multiple boards Custom Cables & Combinations Mix and match Data Rate and other cable types or customize with special sizes, lengths and types. For application specific options, contact hdr@samtec.com Mix and match signal & power Coax Cable 26 AWG 50Ω 30 AWG 50Ω 32 AWG 50Ω 34 AWG 50Ω 38 AWG 50Ω 38 AWG 75Ω Quiet Power Coax 26 AWG 20Ω Twinax Cable 30 AWG 100Ω RF Cable 32 & 36 AWG 50Ω for MHF 20 AWG RG58 50Ω 26 AWG RG 174 or high performance RG 316 50Ω 30 AWG RG 178 50Ω 30 AWG RG 179 75Ω Mix and Match coax/twinax and RF Mix and match twinax and coax Every cable 100% continuity tested and hi/pot tested 26 AWG 20Ω Quiet Power coax Finger actuated locking clips 6

Custom Connectors & Features Customize your assembly with a variety of industry standard, conventional and non-standard connector terminations, combinations and features. High Speed Connectors Q Strips Q Pairs Q2 TM Test Pogo Pins in shielded and unshielded bodies Spring Contacts Edge Cards Industry Standards RF Connectors MHF MMCX, MCX SMA, SMB BNC, TNC, N Type High Speed ed I/O HDMI VHDCI RJ45 USB, Firewire D-Subminiature PCI Express Interface I/O Terminations High speed connectors Conventional and Industry standard terminations Rugged features Retention, screw downs, self latching and other rugged options UV cured epoxy for cable termination region protection Spring contacts and pogo pins Special housings 7

Data Rate Cable Specifications Coax Cables 26 to 34 AWG 26 AWG 50Ω (± 1Ω) Coax (0,76) 030 (0,76).030 (5,21) 205 (1,52).060 (1,78).070 30 AWG 50Ω (± 1Ω) Coax (1,69).066 (17,4).685 Standard Samtec Series: DHSC (1,02).040 (0,51).020 (5,08).200 (1,52).060 (1,19).047 (12,42).498 (1,78).070 32 AWG 50Ω (± 1Ω) Coax (0,81).032 (0,46).018 (1,52).060 (5,05).1990 (0,99).039 (1,78).070 (20,28).799 34 AWG 50Ω (± 1Ω) Coax (0,81).032 (0,46).018 (0,80).032 (16,66).656 (1,78).070 8 (5,05).199 (1,52).060

Coax Cables 38 AWG 38 AWG 50Ω (± 2Ω) Coax Standard Samtec Series: SQCD, MICD, HQCD, EQCD, HBCD, FHSC, HHSC, THSC (0,15).038 (0,89).035 (1,52).060 (5,02).198 (0,64).025 (13,53).533 (1,78).070 38 AWG 75Ω (± 3.5Ω) Coax Standard Samtec Series: EQSD (0,38).015 (0,89).350 (1,52).060 (5,02).198 (0,97).038 (19,84).781 (1,78).070 30 AWG 100Ω (± 5Ω) Coax Twinax Cables 30 AWG Standard Samtec Series: EQDP, HQDP, EEDP, 6QDPS (0,57).022 (1,27).050 (1,52).060 (4,83).190 (0,83).325 (2,03).080 (16,89).665 (1,78).070 Coax Quiet Power Cables 26 AWG 26 AWG 20Ω Coax Power Integrity: minimizes coupling to high speed signals Power EMI: minimizes EMI aggression Current Rating: 4A Capacitance: 239 pf/meter (nominal) Inductance:.092 mh/meter (nominal) Temp Rating: -25 C to +105 C (0,76).030 (1,14).045 (0,76).030 (1,52).060 (5,21).205 (12,70).500 (1,78).070 9

High Speed I/O Cable Assemblies V-Port Cable Assemblies 100Ω Differential Pair Signal Routing Ideal for high speed data transfer applications Standard Thumbscrews Optional Reverse Polarization Mates with VRDPC Series keyed to prevent accidental mating with common VHDCI cable plugs Cost-efficient Shielded Twisted Pair for longer cable runs (VPSTP Series) No. of Signal Pairs Cable Type VPSTP 30 AWG Shielded Twisted Pair 8, 12, 16, 24, 32 VPLSP 26 AWG Low Skew Pair Outer EMI Shield Yes Yes Standard Cable Length Applications Performance 1 to 5 meters 1 to 5 meters Rugged, Panel-to-Panel Rugged, Panel-to-Panel 1 GHz @ 1 meter* 2 GHz @ 1 meter* * Estimated, may vary depending on signal type 26 AWG Low Skew Pair (VPLSP Series) 30 AWG twinax HPDPI Series No. of Signal Pairs No. of Power Lines Cable Type HPDPI HPSTP HPLSP 30 AWG Twinax 5 or 8 5 30 AWG Shielded Twisted Pair 26 AWG Low Skew Pair Outer EMI Shield No Yes Yes Standard Cable Length 152 mm to 2,5 meters 1 to 5 meters 1 to 5 meters Applications Rugged, Cable-to- Rugged, Rugged, Board Panel-to-Panel Panel-to-Panel Performance TBD 1 GHz @ 1 meter* 2 GHz @ 1 meter* * Estimated, may vary depending on signal type HDMI Cable Assemblies 100Ω Differential Pair Signal Routing Ideal for HDMI and high speed data transfer applications Mates with industry standard HDMI receptacles HDMI is a registered trademark of HDMI Licensing LLC. 26 AWG Low Skew Pair (HPLSP Series) 30 AWG Shielded Twisted Pair for longer cable runs (1 to 4 meters) (HPSTP Series) Edge Rate Cable Assemblies 100Ω Differential Pair Signaling 26 AWG Low Skew Pair Cable plug with rugged Edge Rate contacts Die cast cable housing Positive latching Mating right angle connector (ERM8-RA Series) and PCB cage (ERC Series) also available Die cast housing ERLSP Series 26 AWG Low Skew Pair (HPLSP Series) Edge Rate Contacts 10

AccliMate Systems AccliMate IP68 Sealed Circular Cable Systems Meets IP68 requirements for dust and waterproof sealing Cable Plugs and Receptacles, size 17 shell Shielded USB-A, USB-AM & USB-B Shielded Ethernet/RJ45 & RF connectors Field Termination Kits for long cable runs and small-opening applications, where the Sealed Circular Ethernet housing is applied after the run is complete Also Available: Tiger Eye Contacts on (1,27mm).050" pitch Power pins on (3,96mm).156" pitch Size 10 shell in development Ethernet Field Termination Kit (SCPFE Series) TM RF connectors (SCPC/SCRC Series) USB (SCPU/SCRU Series) Ethernet (SCPE/SCRE Series) Meets IP68 requirements Locking & Latching features Dust cap available (DCA Series) Power and High Density also available Application Specific Custom connectors Other AWG Other lengths Special pitches 11

Complete RF Cable Assemblies 0,81mm & 1,13mm RF Cable Assemblies 50Ω systems on a choice of 36 AWG 0,81mm diameter or 32 AWG 1,13mm diameter coax cable 0,81mm diameter cable with MHF1 or MHF3 Type Plugs on End 1 and MHF1, MHF3 Type Plugs or SMA Bulkhead Jacks (Standard or Reverse Polarity) on End 2 1,13mm diameter cable with MHF1 Type Plugs on End 1 and MHF1 Type Plugs or SMA Bulkhead Jacks (Standard or Reverse Polarity) on End 2 Micro RF PCB Connectors for MHF RFs also available RG 174 & RG 316 RF Cable Assemblies 50Ω systems on 26 AWG coax cables choice of 2.3 dk RG 174 or High Performance 2.1 dk RG 316 Choice of end options, including SMA, SMB, MCX, MMCX, BNC and TNC Plugs, MCX Jacks and SMB, SMA, BNC, TNC and N Type Bulkhead Jacks Standard Heat Shrink Wraps Single or double ended Choice of cable lengths Additional end options available Cable components and board level mates available 12 Easily Build RF Cable Assemblies Online! www.samtec.com/rfbuilder

RG 178 RF Cable Assemblies 50Ω systems on 30 AWG 2.1 dk RG 178 coax cables Choice of end options including MCX & MMCX Plugs, MCX Jacks and SMA Bulkhead Jacks Standard Heat Shrink Wraps Single or double ended Choice of cable lengths Additional end options available Cable components and board level mates available RG 179 RF Cable Assemblies 75Ω systems on 30 AWG 2.1 dk RG 179 coax cables Choice of BNC, MCX and SMB Plugs and BNC Bulkhead Jack end terminations Standard Heat Shrink Wraps Single or double ended Choice of cable lengths Additional end options available Cable components and board level mates available RG 58 RF Cable Assemblies 50Ω systems on 20 AWG RG 58 coax cables Choice of TNC Reverse Polarity Plugs and N Type Plug end terminations Standard Heat Shrink Wraps Single or double ended Choice of cable lengths Additional end options available Cable components and board level mates available Samtec offers a full line of completely assembled RF cables, and has developed an interactive program to help you quickly and easily create a valid part number for your RF Cable Assembly, making design and ordering simple. Select the cable type for your assembly Specify the assembly length, then view available RF connector end options Choose the End 1 and End 2 connectors for your assembly View the RF Cable Assembly part number, engineering drawings and technical specifications for the series Order samples online For Custom RF Cable capabilities, contact rf@samtec.com www.samtec.com/rfbuilder 13

Unique RF Cable Systems EQRF Series Combo High Speed Connector/RF Coax Cable Assemblies High Speed 0,8mm pitch (Q Series ) sockets or terminals Choice of MMCX, MCX or SMA Plugs or Jacks 40 or 80 RF connectors Choice of RG 316 or RG 178 coax cable systems Mating Q Series connectors and RF receptacles also available SCPC Series SCRC Series GRF1 Series Ganged In-line RF Cable Systems Ganged In-line MMCX-scale RF Plugs 2, 4, 6 or 8 positions RG 316 coax cable, single or double ended Optional captive panel screws Mating edge mount or through-hole receptacle (GRF1-J Series) also available AccliMate IP68 Sealed Circular RF System Cable Plugs & Receptacles with MMCX-scale Plugs & Jacks Meets IP68 requirements for dust and waterproof sealing Bundled RG 316 coax cable Ganged RF (GRF1-C Series) PCB Interface Custom RF Cable Capabilities Other RF connectors including QMA, SMC, UHF, 1.0/2.3 & Mini UHF I/O assemblies Higher precision termination for lower loss Custom grounding and signal pin geometry Reverse polarity Double shielded Semi-rigid, semi-flex and other cable styles Alternative platings Contact rf@samtec.com 14

High Speed Flex Standard High Speed Flex 0,5mm pitch (HFHM Series) and 0,8mm pitch (HFEM Series) systems Terminate with Single-ended or Differential Pair High Speed connectors High Speed shielded flex circuits Easy customization of cable lengths, pin counts, guide posts, connector heights, etc. Contact flexcircuits@samtec.com Differential Pair High Speed Flex Assemblies Rated @ -3dB Insertion Loss SERIES HFEM HFEM2 HFHM HFHM2 ZFHF PITCH 0,8 mm 0,8 mm 0,5 mm 0,5 mm 0,8 mm MATES QTE-DP/QSE-DP QTE-DP/QSE-DP QTH-DP/QSH-DP QTH-DP/QSH-DP QSE-DP/ZF5 5" (127mm) 3.75 GHz / 7.5 Gbps 2.62 GHz / 5.24 Gbps 2.40 GHz / 4.80 Gbps 2.36 GHz / 4.72 Gbps 3.16 GHz / 6.32 Gbps 10" (254mm) 1.75 GHz / 3.5 Gbps 1.36 GHz / 2.72 Gbps 1.80 GHz / 3.60 Gbps 1.64 GHz / 3.28 Gbps 1.65 GHz / 3.30 Gbps Single-Ended High Speed Flex Assemblies Rated @ -3dB Insertion Loss SERIES HFEM HFHM2 HSF8 PITCH 0,8 mm 0,5 mm 0,8 mm MATES QTE/QSE QTH/QSH HSEC8 5" (127mm) 1.85 GHz / 3.70 Gbps 1.91 GHz / 3.82 Gbps 6 GHz / 12 Gbps 10" (254mm) 1.15 GHz / 2.30 Gbps 1.05 GHz / 2.10 Gbps 4.5 GHz / 9 Gbps High Speed Data Links 0,8mm pitch (ZFHF Series) Terminates with Differential Pair High Speed connectors and Flex Cable Jumpers 14 signal pairs Easily modified for custom pin counts, cable lengths, guide posts and connector heights High Speed shielded flex circuits Reversed end optional Mating ZIF (ZF5 Series) and Q Pairs Interfaces (QSE-DP Series) available High Speed Edge Card Double-sided card interface (HSF8 Series) for mating with mini edge card connectors on 0,8mm pitch Choice of vertical, horizontal and edge mount mating connectors Easy customization of cable lengths, pin counts, polarization, etc. High Density Data Link.050" x.050" pitch grid array (SADL Series) Mates with SEARAY open pin field arrays Standard and custom jumper lengths and pin counts Design/Build Capabilities Double-sided and Multi-Layer High speed, controlled impedance designs Design and manufacture capabilities Connector and component placement 15