General Specifications GS 1E22-1E XF14 Magnetic Flowmeter onverter for Remote Flowtube The XF14 magnetic flowmeter converter is a sophisticated product with outstanding reliability and ease of operation, developed on the basis of decades of fieldproven experience. The XF14 employs an LD indicator, infra-red ray switches, and Easy Setup parameters to ensure ease of maintenance. The combination of a replaceable electrode type flowtube and diagnostics to detect the adhesion level on the electrodes dramatically improves maintainability. The XF14 also employs the fluid noise free Dual Frequency Excitation Method and the newly added Enhanced Dual Frequency Excitation Method as an option for more severe applications to ensure higher stability and quicker response. Note: The Dual Frequency Excitation Method is Yokogawa s unique technology. FETURES User Friendly Fluid dhesion Level Diagnosis y constantly monitoring the level of insulating substance on the electrodes, it is possible to determine when maintenance is required. With the utilization of a replaceable electrode type flowtube, in cases of severe adhesion, the electrodes can be easily removed from the meter and cleaned. lear and Versatile Indications The LD indicator employs a large, backlit full dot-matrix, that can facilitate various displays. One to three lines of indications are possible. When there is an alarm condition, a full description of the countermeasure is indicated. Easy Setup Parameters The most frequently used parameters are arranged in a group at the top. The infra-red ray switches enable the users to set parameters without opening the cover. Enhanced Performance and Specifications Enhanced Dual Frequency Excitation Method The Enhanced Dual Frequency Excitation Method can be optionally selected. For severe applications such as for high concentration slurry or low conductivity fluid, extremely stable measurements can be realized. Improved Minimum onductivity The lower limit of conductivity is from 1 S/cm. High-Speed Pulse : The pulse rate now goes up to 1, pps (pulse/ second) for use with high speed applications such as in short time batch processes. Versatile Input/ouput Function Now vailable Expansion of Product Lineup Two Types of ccuracy Standard accuracy is.35% of Rate, and High grade accuracy type (.2% of Rate) is also available. ONTENTS Features P. 1 Standard Specifications P. 2 Standard Performance P. 3 Normal Operating onditions P. 5 ccessories P. 5 Model and Suffix ode P. 5 Optional Specifications for XF14 onverter P. 6 Terminal onfiguration, Terminal Wiring P. 6 External Dimensions P. 6 Ordering Information P. 7 Yokogawa Electric orporation 2-9-32 Nakacho, Musashino-shi, Tokyo 18, Japan Tel.: 81-422-52-4443 Fax.: 81-422-52-218 GS 1E22-1E opyright June 23 1st Edition June 23
STNDRD SPEIFITIONS onverter *1: Select the functions for any two points from: one pulse output, one alarm output, one status input, or two status outputs. *2: For models without an indicator, the hand-held terminal is neccessary to set parameters. Excitation Method Standard dual frequency excitation: Size 2.5 to 4 mm (.1 to 16 in.) ombined with XF Remote Flowtube Enhanced dual frequency excitation: Size 25 to 2 mm (1. to 8. in.) ombined with XF Remote Flowtube (for optional code HF1 or HF2) Input Signal (*1): One Status Input: Dry contact Load resistance: 2 Ω or less (ON), 1 kω or more (OFF) Signals: One urrent : 4 to 2 m D (load resistance: to 75 Ω, including cable resistance) One Pulse (*1): Transistor contact output (open collector) ontact capacity: 3 V D (OFF), 2 m (ON) rate.1 to 1, pps (pulse/second) One larm (*1): Transistor contact output (open collector) ontact capacity: 3 V D (OFF), 2 m (ON) Two Status s (*1): Transistor contact output (open collector) ontact capacity: 3 V D (OFF), 2 m (ON) ommunication Signals: RIN or HRT communication signal (Superimposed on the 4 to 2 m D signal) ommunication Line onditions: Load resistance: 25 to 6 Ω (including cable resistance) Distance from power line: 15 cm (6 in.) or more (Parallel wiring should be avoided.) RIN: ommunication Distance: Up to 2 km (1.25 miles), when polyethylene insulated PV-sheathed cables (EV cables) are used. ommunication distance varies depending on the type of cable and wiring used. Load apacitance:.22 µf or less Load Inductance: 3.3 mh or less Input Impedance of ommunicating Device: 1 kω or more (at 24 khz) HRT: ommunication Distance: Up to 1.5 km (.9 mile), when using multiple twisted pair cables. ommunication distance varies depending on the type of cable used. able Length for Specific pplications: Use the following formula to determine the cable length for specific applications: 2 L 65 16 (R ) (f 1,) where: L = length in meters or feet R = resistance in Ω (including barrier resistance) = cable capacitance in pf/m or pf/ft f = maximum shunt capacitance of receiving devices in pf/m or pf/ft Note: HRT is a registered trademark of the HRT ommunication Foundation. Data Security During Power Failure: Data (parameters, totalizer value, etc.) storage by EEPROM. No back-up battery required. Indicator (*2): Full dot-matrix LD (32 132 pixels) Lightning Protector: The lightning protector is built into the excitation current output, the current output, pulse/alarm/status input and output terminals. If optional code is selected, the lightning protector is built into the power terminals. Protection: IP67, NEM4X, JIS 92 water tight protection oating: ase and over: Polyurethane corrosion-resistant oating olor: Mint green (Munsell 5.6 G 3.3/2.9 or its equivalent) onverter Material: ase and over: luminum alloy Mounting/Shapes: Electrical onnection: NSI 1/2 NPT female ISO M2 1.5 female JIS G1/2 (PF1/2) female Terminal onnection: M4 size screw terminal Grounding: grounding resistance 1 Ω or less When optional code is selected, lass grounding (grounding resistance 1 Ω or less) shall be applied. ombined Remote Flowtube: XF14 onverter can be combined with XF Remote Flowtube. If a combined converter is changed from XF14 to XF11 or vice versa, the meter factor must be adjusted by flow calibrations. If the size is 25 mm (1 in.) or larger under conditions of severe fluid noise due to low conductivity or high concentration slurry, use the XF11 onverter. ll Rights Reserved. opyright 23, Yokogawa Electric orporation GS 1E22-1E June 3,23-
Functions How to Set Parameters (*2): The indicator s LD and three infra-red ray switches enable users to set parameters without opening the case cover. Parameters can also be set by means of the HHT. Displayed Languages (*2): Users can choose a language from among English or Japanese. German, French, Italian, Spanish are now preparing. Instantaneous Flow Rate/Totalized Value Display Functions (for models with an indicator) (*2): The full dot-matrix LD enables arbitrary selections of displays from one line to three lines for: Instantaneous flow rate Instantaneous flow rate (%) Instantaneous flow rate (bar graph) urrent output value (m) Totalized value Tag No. Results of electrode adhesion diagnostics Totalizer Display Function (*2): The flow rate is counted one notch at a time according to the setting of totalization pulse weights. For forward/ reverse ranges, the totalized values of the flow direction (forward or reverse) and the flow rate are displayed on the indicator together with the units. The difference values between the forward and reverse flow rate totalized values can be displayed. The reverse flow rate is not counted for a forward single range. Damping Time onstant (*2): Time constant can be set from.1 second to 2. seconds (63% response). Span Setting Function (*2): Span flows can be arbitrarily set in units such as volume flow rate, mass flow rate, time, or flow rate value. The velocity unit can also be set. Volume Flow Rate Unit: kcf, cf, mcf, Mgal (US), kgal (US), gal (US), mgal (US), kbbl (US)*, bbl (US)*, mbbl (US)*, µbbl (US)*, Ml (megaliter), m 3, kl (kiloliter), l (liter), cm 3 Mass Flow Rate Unit (Density must be set.): klb (US), lb (US), t (ton), kg, g Velocity Unit: ft, m (meter) Time Unit: s (sec), min, h (hour), d (day) * US Oil or US eer can be selected Pulse (*1): Scaled pulse can be output by setting a pulse weight. Pulse Width:Duty 5% or fixed pulse width (.5,.1,.5, 1, 2, 33, 5, 1 ms) can be selected arbitrarily. Rate:.1 to 1, pps (pulse/second) Multi-range Function (*1)(*2): Status input enables the switching of up to two ranges. For automatic range switching, the status of up to four ranges can be shown in status outputs and on the indicator. 3 Forward and Reverse Flow Measurement Functions (*1)(*2): Flows in both forward and reverse directions can be measured. The status is shown in status outputs and on the indicator during the reverse flow measurement. Totalization Switch (*1): The status is output if a totalized value becomes equal to or greater than the set value. Preset Totalization (*1): The parameter setting or status input enables a totalized value to be preset to a setting value or zero. % Signal Lock (*1)(*2): Status input forcibly fixes the instantaneous flow rate display, current output, pulse output, and flow rate totalization to %. larm Selection Function (*2): larms are classified into System larms (hard failures), Process larms (such as Empty Pipe, Signal Overflow and dhesion larm ), Setting larms, and Warnings. Whether alarms should be generated or not can be selected for each item. The current output generated for an alarm can be selected arbitrarily from among 2.4 m or less, fixed to 4 m, 21.6 m or more, or HOLD. larm (*1): larms are generated only for the items selected via the larm Selection Function if relevant failures occur. Self Diagnostics Functions (*2): If alarms are generated, details of the System larms, Process larms, Setting larms and Warnings are displayed together with concrete descriptions of countermeasures. Flow Upper/Lower Limit larms (*1): If a flow rate becomes greater or smaller than the set value, this alarm is generated. In addition, two upper limits (H, HH) and two lower limits (L, LL) can be set. If a flow rate becomes greater or smaller than any of the set values, the status is output. Electrode dhesion Diagnostics Function (*1) (*2): This function enables monitoring of the adhesion level of insulating substances to the electrodes. Depending on the status of adhesion, users are notified by a warning or an alarm via status outputs. If replaceable electrodes are used, they can be removed and cleaned if adhesion occurs. STNDRD PERFORMNE Reference onditions: Similar to S EN 2914 (1993); ISO914 (1991) Fluid temperature: 2 1 mbient temperature: 25 5 Warm-up time: 3 min Straight runs Upstream > 1 DN Downstream > 5 DN Properly grounded Properly centered ll Rights Reserved. opyright 23, Yokogawa Electric orporation GS 1E22-1E June 3,23-
ccuracy (ombined with XF Remote Flowtube at reference conditions) Pulse : PF/eramics Lining: Size mm (in.) 2.5 (.1) to 15 (.5) 25 (1.) to 2 (8.) 25 (1) to 4 (16) V.3 (1).3 V 1 (1) (33) 1. mm/s V.15 (.5).5 mm/s V.15 (.5).5 mm/s.15 V 1 (.5) (33) V.15 (.5).15 V 1 (.5) (33) Standard ccuracy (alibration code ).35% of Rate.35% of Rate.5 mm/s.35% of Rate Size 2.5 mm (.1 in.) to 15 mm (.5 in.) Pulse ccuracy % of Rate 1.2 1..8.6.4.35.2 High Standard grade ccuracy High grade ccuracy (alibration code ).15 V 1.18% of Rate (.5) (3.3).2mm/s 1 V 1.2% of Rate ll Rights Reserved. opyright 23, Yokogawa Electric orporation T1.EPS 1 2 6 8 1 V[m/s] F1.EPS Size 25 mm (1. in.) to 4 mm (16 in.) % of Rate 1.2 1..8 Standard ccuracy Pulse.6 High grade ccuracy ccuracy.4.2 1 2 6 8 1 V[m/s] F2.EPS Polyurethane Lining Size mm (in.) 25 (1.) to 4 (16) V.3 (1.).3 V 1 (1.) (33) 1. mm/s.35% of Rate Size 25 mm (1. in.) to 4 mm (16 in.) % of Rate 1.2 1..8 Pulse.6 ccuray.4.35.2 High Standard grade ccuracy Standard ccuracy (alibration code ) T2.EPS 1 2 6 8 1 V[m/s] F3.EPS Enhanced dual frequency excitation (ombined with XF Remote Flowtube Optional code HF2).3 (1) V 1 (3.3) 1 (3.3) V 1 (33) Pulse ccuracy.45 /V % of Rate Standard ccuracy +1 mm/s 4 T13.EPS urrent : Plus.5% of Span Repeatability:.1% of Rate (V 1 m/s (3.3 ft/s)).5% of Rate +.5 mm/s (V < 1 m/s (3.3 ft/s)) Maximum Power onsumption: ombined with XF Remote Flowtube: 12 W Insulation Resistance (*1): 1 MΩ between power terminals and ground terminal at 5 V D 1 MΩ between power terminals and each output/ status input terminal at 5 V D 2 MΩ between ground terminal and each output/status input terminal at 1 V D 2 MΩ between output/status input terminals at 1 V D Withstand Voltage (*1): 135 V between power terminals and ground terminal for two seconds 16 V between excitation terminals and ground terminal for two seconds 2 V between excitation terminals and each output/status input terminal for two seconds UTION *1: efore performing the Insulation Resistance Test or the Voltage reakdown Test, disconnect the ground terminal if the power terminal has a lightning protector (optional code ). Following the relevant test, wait for more than 1 seconds after the power supply has been turned off before removing the cover. fter testing, be sure to use a resistance for discharge and return the short bar to its correct position. Screws must be tightened to a torque of 1.18 N-m or more. fter closing the cover, the power supply can be restored. Safety Requirement Standards: EN611 ltitude at installation site: Max. 2 m above sea level Installation category based on IE11: Overvoltage category II ( II applies to electrical equipment which is supplied from a fixed installation-like distribution board.) Pollution degree based on IE11 Pollution degree 2 ( Pollution degree describes the degree to which a solid, liquid, or gas which deteriorates dielectric strength or surface resistivity is adhering. 2 applies to a normal indoor atmosphere.) EM onformity Standards: EN61326 EN61-3-2, EN61-3-3 S/NZS 264 GS 1E22-1E June 3,23-
NORML OPERTING ONDITIONS mbient Temperature: 4 to 6 Indicator s operating range: 2 to 6 Maximum temperature should be 5 in the case of Power Supply ode 2. mbient Humidity: to 1% Lengthy continuous operation at 95% or more is not recommended. Power Supply Power supply code 1: specifications Rated power supply: 1 to 24 V, 5/6 Hz (Operating voltage range: 8 to 264 V ) D specifications Rated power supply: 1 to 12 V D (Operating voltage range: 9 to 13 V D) Power supply code 2: specifications Rated power supply: 24 V, 5/6 Hz (Operating voltage range: 2.4 to 28.8 V ) D specifications Rated power supply: 24 V D (Operating voltage range: 2.4 to 28.8 V D) Supplied Power and able Length for Power Supply ode 2 1 9 8 7 6 5 4 3 2 1 2 22 24 26 28 Input voltage (V) able cross section area: 1.25 mm 2 able cross section area: 2 mm 2 llowable cable length (m) F4.EPS Vibration onditions: Level of vibration in conformity with IE 668-2-6 (SM31. 1-198) 1 G or less (frequency 5 Hz or less) Note: void locations with much vibration (with a vibration frequency of 5 Hz or more), which may cause damage to the equipment. ESSORIES Fuse (T2., 25 V): 1 pc. *Time lag fuse Mounting bracket: 1 set Hexagonal wrench: 1 pc. MODEL ND SUFFIX ODE XF14 Magnetic Flowmeter onverter for Remote Flowtube: Model Suffix ode Description XF14 Use Option G Signal and -D ommunication -E 1 Power Supply 2 - Electrical onnections -2-4 1 Indicator (*1) 2 N *1: 1 2 N Signal able: / 5 Magnetic Flowmeter onverter General-Purpose Use For XF Remote Flowtube of Size 2.5 to 4 mm (.1 in. to 16 in.) 4 to 2 m D, RIN ommunication 4 to 2 m D, HRT ommunication 1 V to 24 V or 1 to 12 V D 24 V /D JIS G1/2 female NSI 1/2 NPT female ISO M2 1.5 female With Indicator (Horizontal) With Indicator (Vertical) None Optional code (See the Table of Optional Specifications) Model Suffix ode Description XF Termination able Length Option - -4 -L / T3.EPS Magnetic Flowmeter Dedicated Signal cable for the DMG XF series No Termination. set of termination parts for M4 screws is attached. Terminated for the XF11/14 onverter. Designate the cable length, unit: m Following L, specify the cable in three digits as multiple of 1 meter (e.g., 1, 2, or 5) for a length up to 5 m, or as a multiple of 5 meters (i.e., 5, 1, 15, or the like). The maximum cable length: 2 m for combined use with XF11 1 m for combined use with XF14 With termination parts sets. Following, specify the q ty of sets of termination parts in one digits. T4.EPS Note: The cable is constructed with double shielding over the two conductors, and uses heat-resistant vinyl as the outer covering material. Finished diameture: 1.5 mm (.413 in.) Maximum temperature: 8 (175 F) Unneccessary to order the above cable for submersible type flowtube or for the optional code DH flowtube because the flowtube is wired with 3 m (98 ft) cable. For excitation, prepare a two-core cable at the customer side. Recommended Excitation able: Use polyvinyl chloride insulated and sheathed control cable (JIS 341) or Polyvinyl chloride insulated and sheathed portable power cables (JIS 3312) or equivalents. Outer Diameter: 6.5 to 12 mm (.26 to.47 in.) 7.5 to 12 mm (.3 to.47 in.) (Waterproof Glands, optional code EG, EU, EW) Nominal ross Section:.5 to 2.5 mm 2 ll Rights Reserved. opyright 23, Yokogawa Electric orporation GS 1E22-1E June 3,23-
6 OPTIONL SPEIFITIONS FOR XF14 ONVERTER Item Specification ode Lightning Protector D Noise ut ircuit urn Out Down NMUR NE43 ompliant ctive Pulse Waterproof Glands Waterproof Glands with Union Joints Plastic Glands Stainless Steel Mounting racket Stainless Steel Tag Plate Painting olor hange Epoxy Resin oating High nti-corrosion oating alibration ertificate lightning protector is built into the power terminals. The D Noise ut ircuit is built in. vailable for 15 mm (.5 in.) and larger sizes, and for fluids with the conductivity of 5 µs/cm or higher. Nullifies the empty check and electrode adhesion diagnostic function. The output level is set to m during a PU failure and is set 2.4 m or less during an alarm. Standard products are delivered with a setting 25 m during a PU failure and 21.6 m or more during an alarm. signal limits: 3.8 to 2.5 m Failure alarm down-scale: status at a PU failure or an alarm is 2.4 m ( 1%) or less. Failure alarm up-scale. status at a PU failure or an alarm is 21.6 m (11%) or more. ctive pulses are output in order to drive an external electromagnetic or electronic counter directly using the converter s internal power supply. (Nullfies the standard transistor contact pulse output.) voltage: 24 V D ±2% Pulse specifications: t the drive current of 3 to 15 m Pulse rate:.1 to 2 pps (pulse/second); Pulse width: 2, 33, 5, or 1 ms Waterproof glands are attached to the electrical connections. vailable only for JIS G1/2 electric connections. Waterproof glands with union joints are attached to the electrical connections. vailable only for JIS G1/2 electric connections. Plastic glands are attached to the electrical connections. vailable only for JIS G1/2 electric connections. Provided with a JIS SUS34 (ISI 34 SS/EN 1.431 equivalent) stainless steel mounting bracket in lieu of the standard carbon steel bracket. Screwed JIS SUS34 (ISI 34 SS/EN 1.431 equivalent) stainless steel tag plate. hoose this option when an SS tag plate is required in addition to the standard nameplate with the tag number inscribed on it. oated in black (Munsell N1.5 or its equivalent.) oated in jade green (Munsell 7.5G4/1.5 or its equivalent.) oated in metallic silver. Epoxy resin coating instead of standard polyurethane resin coating. The color is same as standard type. Three-layer coating (urethane coating on two-layer epoxy resin coating) in the same range as that for the standard coating. The color is same as standard type. Salt/alkali/acid/weather-resistance. Level 2: The Declaration and the alibration Equipment List are issued. Level 3: The Declaration and the Primary Standard List are issued. EL 1 2 3 EM EG EU EP S ST P1 P2 P7 X1 X2 L2 L3 Terminal onfiguration EX1 EX2 S S Terminal Wiring Terminal Symbols EX1 EX2 S S Description Excitation current Flow singal input Level 4: The Declaration and the Yokogawa Measuring Instruments ontrol System are issued. N/- L/+ I+ I- DO+ DO- DIO+ DIO- F5.EPS Terminal Symbols N/ L/+ I+ I DO+ DO DIO+ DIO Description Functional grounding Power supply urrent output 4 to 2m D Pulse output/ larm output/ Status output larm output/ Status output/ Status input Protective grounding (Outside of the terminal) T6.EPS EXTERNL DIMENSIONS onverter XF14 Ground Terminal (M4) 139.5(5.49) 28 (1.1) 197(7.76)* 1 13(4.6) 66(2.6) 31(1.22) ø128(5.4) 18(7.9) *1: When indicator code N is selected, subtract 12 mm (.47 inch) from the value in the figure. 49(1.92) 57(2.24) L4 T5.EPS Unit: mm (approx. inch) 243.5(9.59) ø87(3.43) Weight: 2.8kg (6.2lb) F6.EPS ll Rights Reserved. opyright 23, Yokogawa Electric orporation GS 1E22-1E June 3,23-
7 Dedicated Signal able XF-4-L E 15 +.2 (5.91) 8(.31)Max. 15 +.2 (5.91) G 9(3.54) 55(2.17) 9(3.54) F S S Unit: mm (approx. inch) (WHITE) (LK) (RED) D (WHITE) (LK) (RED) 8(.31)Max. ONVERTER 2(.79) L(SPEIFIED LENGTH) XF ø1.5(.41) FLOW TUE Model XF-4 D E F G 7(2.76) 25(.98) 5(1.97) 6(1.36) XF--L F7.EPS P ø1.5(.41) XF L(SPEIFIED LENGTH)+34(13.39)(LENGTH for END TRETMENT) F8.EPS ORDERING INFORMTION Note 1: When ordering a remote flowtube and/or a converter, specify the flow span, unit, pulse weight, and totalizer display pulse weight for the order details of the flowtube. These parameters will then be set in the combined converter before shipment. Please refer to GS1E2D1-1E ORDERING INFORMTION. Note 2: Some options, if ordered, require the relevant specifications to be input when ordering. RELTED INSTRUMENTS alibrator for Magnetic Flowmeter (M12): GS 1E6K2-E T2 rain Terminal: GS 111-E XF Magnetic Flowmeter Integral Type/Remote Flowtube: GS 1E2D1-1E XF11 onverter for Remote Flowtube: GS 1E21-1E 1. Model, specification and option codes. 2. Tag number Each tag number can be specified in up to 16 characters in a combination of letters (upper or lower case), numbers, - and.. If specified, the tag number is inscribed on the product s name plate and tag plate (if optional code ST is selected). If the product is an integral type, the tag number is also written into the memory of its converter. For HRT protocol, up to 8 characters can be specified. If the user wishes to change only the setting to be written into a converter s memory, specify the software tag. If a tag number is not specified, the relevant product is delivered without it. ll Rights Reserved. opyright 23, Yokogawa Electric orporation GS 1E22-1E June 3,23-