For igh Speeds Simultaneous fit system surpasses all other spindle concepts while offering interchangeability with existing machines and toolholders. CATAO No. SPINDE SYSTEM DUA CONTACT Patented U.S.A., CANADA, ERMANY, U.K., FRANCE, ITAY & SOUT KOREA For I PUS SPINDE SYSTEM, please refer to Catalog No. 8 igh speed series is now introduced. igh speed machining creates new improved machining techniques for higher finish and accuracies with increased production. SK-A DIN 989-/ ( ISO - ) SK-E (DIN 989-) SK-F (DIN V 989-) For igh Speed Cutting MEA MICRO CUCK MEA NEW AY CUCK MEA E CUCK MEA DOUE POWER CUCK Takaramachi -, igashiosakashi Osaka 79-80 JAPAN Phone : (+8)-7-98-8 Fax : (+8)-7-98-870 http://www.big-daishowa.com E-mail: export@big-net.ne.jp CERTIFIED MANAEMENT SYSTEM ISO 0 JQA-QMA AWAJI No. Factory JQA-QM9 FA Dept. CATAO No.EXm--0807- Subject to technical changes by further developments. S The ody, Collet, Nut, Wrench and Pullstud are specifically designed to be ideal for high speed operations. Patented; USA, Canada, ermany, UK, France, Italy and South Korea SPINDE SYSTEM DUA CONTACT
Mega Chuck Series is designed and developed based Patented; USA, Canada, ermany, UK, France, Italy and South Korea on the superior technology of the New aby Chuck and i- Power Milling Chuck. igh speed (max. 0,000 ), balanced and precision machining is achieved by totally SPINDE SYSTEM DUA CONTACT PRECISION ROUND AND AANCED FOR I SPEED MACININ EASY AND FIRM CAMPIN Y TE MEA WRENC new designed series including accessories. Mega Chucks are micro mirror ground finished on all surfaces to The unique Mega Wrench has a one way clutch system with roller assure perfect concentricity for high speed machining. The drive bearings and a ratchet function which is capable of safely and keyway is machined after heat treatment. The Mega Chucks are evenly applying force to the entire nut periphery. then balanced with a high precision dynamic balancing machine. Smooth tightening operation by ratchet function. Drive keyways are ground after heat treatment. TYPE ( ) MEA MICRO CUCK - 0,000 MEA NEW AY CUCK,00-0,000 MEA E CUCK,000-0,000 MEA DOUE POWER CUCK,000 - DUA CONTACT I-PUS SPINDE SYSTEM AS STANDARD Dual Contact Spindle System assures the highest rigidity possible in high speed and difficult metal machining applications. Known as I-PUS, this system offers simultaneous dual contact between the machine spindle and toolholder flange face, as well as the machine SPINDE SYSTEM spindle taper and the toolholder taper shank. DUA CONTACT NOTC-FREE DESIN MEA NUT PREVENTS VIRATION AND REDUCES NOISE Vibration at high speeds is eliminated with the use of notch free designed nuts, which offer superior balance and concentricity. This ideal nut design not only reduces whistling noise and splattering SPACE CONTACT coolant, but also assures increased strength of the nut itself. CONVENTIONA I-PUS SPINDE SYSTEM Perfect interchangeability with existing machines and toolholders Notches for wrench application I-PUS SPINDE + I-PUS ODER CONTACT.mm Example of T0 T0.mm I-PUS SPINDE Notches for wrench application CONVENTIONA SPINDE + I-PUS ODER.mm I-PUS ODER CONVENTIONA SPINDE To benefit from all the technical advantages which the I-PUS Spindle System offers, both a I-PUS ODER and a I-PUS Spindle are required.
For small diameter cutting tools World's original Extremely slim design of body and nut provides superior balance and concentricity and is ideal for reaching into confined areas. For drilling, reaming and endmilling World's original igh speed design, offered in six different size collet series, utilizes ultra precision New aby Collets which guarantee a runout at the collet nose of less than micron. 0.mm increments for higher precision Clamping range: ø0. - ø.0 Clamping range: ø0. - ø I-PUS I-PUS STANDARD STANDARD Nut diameter 0, & mm. Extremely slim design. Stype ø0mm Full scale Stype Stype Stype Slim design avoids interference. Ideal for small mold making combining high speed and high precision capability. igh concentricity µm µm 00% concentricity inspection. Within micron at nose is guaranteed. igh precision Micro Collet At nose Collet class AA At d Collet concentricity m m d Max. runout (µm) At nose At end of test bar Within µm Within µm igh precision collet, close to submicron Within µm at nose Within µm at d 00% inspection to guarantee accuracy. Material, production, heat treatment... everything is selected for precision. Endmill Collet is also available. Designed to clamp nominal shank diameter for further improved rigidity and concentricity. way coolant supply Sealed collet nut MEA PERFECT SEA. Through Tools Tools with holes MPS P9 COOANT PRESSURE 7MPa Jet Through Tools without holes Three versions are available. Straight Type: where access is restricted Taper Type: for increased rigidity Cylindrical Shank Type: for increased versatility Straight Type Taper Type 0.mm increments for higher precision Available in 0.mm increments. Collet models Reduced shrinkage optimizes precision. Precision nut to optimize performance of collet. Thrust ball bearings Thrust ball bearings to eliminate distortion of the collet during tightening. Patented design prevents ball bearings from moving at high speed. Threads are finished after heat treatment. Standard NC Collet is used. igh dust resistance Unique sealed collet nut for coolant-through tools. The sealing performance increases with higher coolant pressure. Remove the sealing ring to supply coolant to the periphery of the cutting tool. Coolant through tools Maximum performance! Cylindrical Shank Type Flexible tool layout For tighter and deeper area Precision holder is recommended for chucking. Setup Machine older Cutter Workpiece Cutting conditions Spindle speed Cutting speed Feed rate Axial depth of cut T0 vertical machining center T0-MEAS-T ø -flute carbide ball endmill S0C (JIS),000 (min ) (m/min.) 7 (mm/min.) 0.0 (mm/cutter).8 (mm) Rigid taper design avoids chatter even with high peck feed milling leading to dramatically reduced machining time. Comparison of peck feed amount Pf Ad=.8 08 T versions are available as standard. Ideal length and diameter of holder is the key to precision machining. Select the optimum from the wide range. If selection is limited; Increased tool extension reduces performance Tool extension ess rigid Thrust ball NC collet TiN coating Seal (PS Ring) T0-MEAS-T Other manufacturer..8 0 Peck feed Pf(mm) Tool extension ess rigid Ideal condition! Maximum performance!
For endmills World's original Collet chuck designed exclusively for endmilling up to ømm with high concentricity & rigidity. For endmills World's original Ideal for solid machines Flange contacting nut and simultaneous taper & flange contact assure highest rigidity. Clamping range: ø - ø Clamping range: ø - ø0 I-PUS I-PUS STANDARD STANDARD igh grip collet (P) ripping force is an important element for endmilling with a collet chuck. The long gripping length of the collet in the MEA E series provides a powerful gripping force. The shallower taper of the Extended clamping area collet improves concentricity in order to achieve better surface finishes and longer cutting tool life. Shallow taper earings Seals Clamping nut with thrust ball bearings Eliminates distortion of the collet during tightening for higher gripping force and improved concentricity. Ultimate performance in both chip volume and surface finish! igher gripping force, rigidity and concentricity achieve outstanding results compared to others. T0-MEAE- Other manufacturer MEAE ø, = At nose At d igh concentricity µm µm 00% inspection to guarantee accuracy within m runout at collet nose. Collet concentricity m m d Within µm at nose Within µm at d MEA E COET Substantial and tapered body design Shallow taper Thick body Slit-through coolant Collet class AA Thick body eliminates chatter and deflection. Tapered extension provides the rigidity to prevent vibration. Coolant is reliably directed to cutting surface through slits in the collet. Tool life is extended together with improved surface finish as a result of smooth chip evacuation. Max. runout (µm) At nose At end of test bar Within µm Within µm COOANT PRESSURE 7MPa Stabilizing contact between flange & nut provides exceptional rigidity. The expanded contact diameter of the nut of the Mega Double Power Chuck to the flange provides the highest rigidity as if the chuck and nut were one solid piece. This superior rigidity assures heavier duty machining without chatter. Released Secure coolant supply Tightened Contact Two types are individually designed for the most effective coolant supply Improved surface finish Extended tool life Through tools Type D Smoother chip evacuation Cooling & lubrication of tools Jet through Type DS Flange contacting nut together with I-PUS I-PUS Spindle System igh rigidity achieves higher level of stability. Stabilizing contact of nut to the flange provides exceptional rigidity in addition to the I-PUS effect.. times increased rigidity Comparison test proves increased stiffness compared to others. 0 Contact Contact Siffness(N/µm) 0..0 T0-MEAD- T0 from other manufacturer Deeper cutting depth achieves. times more efficient operation compared to conventional milling chuck. (T0-MEAD-) Machine & cutter Cutting conditions Rated power /8.KW V8m/min Coated carbide endmill S,800 ø, -flutes F,mm/min Workpiece: SS00 (JIS) Axial depth 0mm Cutter Radial DOC (mm) Axial DOC (mm) Removal (CC/min) Power (kw) Roughness (m) For coolant-through tools Sealed collet nut to supply coolant reliably through cutting tool. Coolant is reliably directed to cutting tool periphery from chuck nose. d 0 T0- MEAD- Radial d = mm Power.KW Other manufacturer ( = ) Radial d = 9.mm Power 9.KW ø ø MEA E Other manufacturer MEAE Other manufacturer 0..0 9 9 8 8.9 7. 9.8....0 0..9 9.7 P MEA E PERFECT SEA Ideal for burnishing drills and reamers due to extended gripping length of MEA E Chuck. Chip volume 7cc/min 0cc/min
Type S 7 T-MEAS- - -MEAS- - - T0-MEAS- - -MEAS- - Clamping Range : ø0. - ø.0 T - MEA S - ength Micro Chuck Max. Capacity Mega Chuck I-PUS taper No.. Mega Nut is included. Collet and wrench must be ordered separately.. Weight does not include a collet.. The "MAX" allowable spindle speed listed in the table is directly influenced by the rigidity of the machine and balance of cutting tool. Therefore, it is possible that the max. allowable speed may not always be achievable. I-PUS holders can be used in machining centers with conventional spindles. Type T T T-MEAS- T - T - T -T -MEAS- T - T - T -T -T -MEAS- T - T - T -T -T CAMPIN RANE 0. - 0. -.0 0. - 0. -.0. 8.. 8. T - MEA S - T Taper type ength Micro Chuck Max. Capacity Mega Chuck I-PUS taper No. CAMPIN RANE. 0. -. 0.7 8. 8 0. - 0. -.0.0.8 7..0... 8.9...8 9 9. 8. 9. Refer to notes below the table of Type S for Type T also. Taper-off design minimizes interference and maximizes rigidity. 9 9 T No. M P0.8 M7 P0. M P0.8 M7 P0. Micro diameter design is ideal for high speed applications in tight areas with small diameter cutting tools. 0,000 For MEA MICRO COET P9 For MEA MICRO NUT P0 T No. 0,000 0,000 0,000 0,000,000 0,000 0,000,000 T =JIS 9(I-PUS) M P0.7 M P0.8 M7 P0. COET F o r s m a ll T =JIS 9(I-PUS) MNS MNS MNS MNS d i a m e t e r NUT For MEA WRENC P0 COET.. (S=0.) NUT MNS MNS MNS t o o l s c u tti n g WEIT 0.0 0. 0. 0. 0..0.0 WEIT 0.8 0. 0. 0.9 0.0 0. 0. 0.0 0. 0. 0. 0. 0. 0.8 Type T T0 CAMPIN RANE T0-MEAS- T - T -T -MEAS- T - T - T -T -T T -MEAS- T - T - T -T -T T 0. -. 0. - 0. -.0. Refer to notes below the table of Type S for Type T also. CYINDRICA SANK TYPE ST0-MEAS- ST-MEAS- - ST-MEAS-. Nut is included. Collet and Wrench are optional.. Weights do not include a collet. 0. 7..7.9. 9..8. 7.0. 8.0.7..9 8. 7 7 87 7 7 7 87 0 7 7 7 87 0. 8. 8 9 For MEA MICRO COET P9 For MEA MICRO NUT P0 ø0 ultra small dia. to avoid interference. igh precision is maintained by combination with NEW AY CUCK. CAMPIN RANE 0. -. 0. - 0. -.0 ST0 - MEA S - ength Micro Chuck New aby Chuck System Cylindrical Shank Size 0 SST-MEAS- SST-MEAS- CAMPIN RANE 0. - 0. -.0. 8. MEA MICRO CUCK SET Including convenient storage case. 8 9 For MEA MICRO COET P9 For MEA MICRO NUT P0. 8. M P0.7 M P0.8 M7 P0. M P0.7 M P0.8 M7 P0. 8,000,000,000 8,000,000,000,000 8,000,000,000 COET NCS- NCS- NCS- NCS- NCS- NCS- NCS- NCS- NCS- NCS- COET NCS- NCS- NCS- NCS- NCS- SPINDE SYSTEM For MEA WRENC P0 For MEA WRENC P0 8 DUA CONTACT NUT MNS MNS MNS WEIT 0.99.0..00.0.0.08...0.0.0.0... (S=0.) NUT WEIT MNS 0.0 0. MNS 0. 0.8 MNS 0. Contents < SST - MEAS - > < SST - MEAS - > ODY/ ST - MEAS - (with MNS nut) ODY/ ST - MEAS - (with MNS nut) COET/ NCS - & ( pcs.) COET/ NCS -,, & ( pcs.) WRENC/ MR WRENC/ MR WOODEN OX WOODEN OX 9 COET NUT MNS MNS WEIT 0. 0.8
SPINDE SYSTEM DUA CONTACT MEA MICRO COET MICRO COET PROTECTIVE CASE Despite their compact size, high clamping force and accuracy are achieved. NC S - 0. AA Class Max. Collet Capacity Micro Chuck Max. ody Capacity New aby Collet øa Collet Class AA Micron Micron d Max. Runout (Micron) At nose Within µm At end of test bar Within µm Exclusive collet case to protect and maintain the high precision Micro Collets and ease location. NS NS NS COET NCS NCS NCS. Case dimensions include the handle. NUMER OF OES 0 0 70 NUMER OF SPARE OES CASE SIZE (Width X ength) X 9 89 X 8 Case Material: Polypropylene MEAS MEAS MEAS COET CAMPIN RANE COET CAMPIN RANE COET CAMPIN RANE COET NCS-0. AA -0. AA -0.7 AA -0.8 AA -0.9 AA -.0 AA -. AA -. AA -. AA -. AA -. AA -. AA -.7 AA -.8 AA -.9 AA -.0 AA -. AA -. AA -. AA -. AA -. AA -. AA -.7 AA -.8 AA -.9 AA - AA -. AA -.AA -. AA øa=.0 =8.8 0. - 0. 0. - 0. 0. - 0. 0. - 0.8 0.8-0.9 0.9 -.0.0 -.. -.. -.. -.. -.. -.. -.. -.8.8 -.9.9 -.0.0 -.. -.. -.. -.. -.. -.. -.. -.8.8 -.9.9 - -.. -.. -. NCS-0. AA -0. AA -0.7 AA -0.8 AA -0.9 AA -.0 AA -. AA -. AA -. AA -. AA -. AA -. AA -.7 AA -.8 AA -.9 AA -.0 AA -. AA -. AA -. AA -. AA -. AA -. AA -.7 AA -.8 AA -.9 AA - AA -. AA -.AA -. AA -. AA -. AA -. AA -. AA -.7 AA -.8 AA -.9 AA - AA 0. - 0. 0. - 0. 0. - 0. 0. - 0.8 0.8-0.9 0.9 -.0.0 -.. -.. -.. -.. -.. -.. -.. -.8.8 -.9.9 -.0.0 -.. -.. -.. -.. -.. -.. -.. -.8.8 -.9.9 - -.. -.. -.. -.. -.. -.. -.. -.. -.8.8 -.9.9 - NCS-0. AA -0. AA -0.7 AA -0.8 AA -0.9 AA -.0 AA -. AA -. AA -. AA -. AA -. AA -. AA -.7 AA -.8 AA -.9 AA -.0 AA -. AA -. AA -. AA -. AA -. AA -. AA -.7 AA -.8 AA -.9 AA - AA -. AA -.AA -. AA -. AA -. AA -. AA -. AA -.7 AA -.8 AA -.9 AA - AA 0. - 0. 0. - 0. 0. - 0. 0. - 0.8 0.8-0.9 0.9 -.0.0 -.. -.. -.. -.. -.. -.. -.. -.8.8 -.9.9 -.0.0 -.. -.. -.. -.. -.. -.. -.. -.8.8 -.9.9 - -.. -.. -.. -.. -.. -.. -.. -.. -.8.8 -.9.9 - NCS-. AA -. AA -. AA -. AA -. AA -. AA -.7 AA -.7AA -.8 AA -.9 AA -.0 AA -. AA -. AA -. AA -. AA -. AA -. AA -.7 AA -.8 AA -.9 AA -.0 AA øa=7. =. øa=9. =. CAMPIN RANE -.. -.. -.. -.. -.. -.. -..7 -.8. -.8.8 -.9.9 -.0.0 -.. -.. -.. -.. -.. -.. -.. -.8.8 -.9.9 -.0 MEA MICRO NUT ighly balanced and slim nut. Notch-free design eliminates vibration at high speeds as well as reduces wind noise and coolant spray. MEA WRENC Micro Dia. ø0 MN S Micro Chuck Max. Clamping Dia. Mega Nut Firm tightening by one-way clutch system with roller bearings. Tightening force is evenly distributed to entire surface of the nut. The ratchet function easily tightens and loosens the nut. Inside Taper Cleaner of Collet Chucks TAPER CEANER Maintain the precision of collet chucks MR 0 Inner Dia. of Wrench Mega Wrench SC-NCS SC-NCS SC-NCS CUCK WRENC MNS 0 0..0 MEAS MR0 MNS...0 MEAS MR MNS. 7.0. MEAS MR. Nut is included as standard accessory with Mega Micro Chuck. CUCK MEAS MEAS MEAS MR0 MR MR 0 Toolholder taper cleaner TOOIN CEANER OCK CUCK MEAS MEAS MEAS Cleans both taper and flange of the T toolholders. Cleaning strip for Face Cleaning strip for taper SCE- SCE-0 CUCK T T T0 T0 9 0
T - MEA N - ength New aby Chuck Max. Capacity Mega Chuck I-PUS Taper No. T-MEA N- - - - - -MEA 8N- - - - - MEA0N- - - - - -MEAN- - - - - MEAN- - - - MEAN- - - - CAMPIN RANE Clamping Range : ø0. - ø T No. Coolant-Through ole Ideal ultra precision holders for high speed machining with carbide drills, reamers and endmills. Wide range of lengths and a variety of collet series sizes covers all machining applications up to ømm. Standard New aby Collets are used, which guarantee a runout within micron at the collet chuck nose. COET T =JIS 9(I-PUS) NUT 0,000 0. - - NC - MN 9 0,000 9 0. - 8 79 - NC 8- MN 8 9 0,000 9. - 0 8-8,000 NC0- MN0 79 9 0,000 9. - -,000 NC- MN 79 9 8 -. -,000 8-8 NC- MN 8 -. - - - 8 - NC- MN -,000 F o r d rilli n g, r e a m i n g a n d Adjusting Screw (Optional) WEIT 0. 0. 0. 0. 0.9 0. 0. 0. 0.7 0.7 0. 0. 0.8 0. 0.8 0. 0. 0.7 0.8 0.9 0. 0.8 0.9. 0.7 0.8.0. illi n g e n d m T0-MEA N- - - - - -MEA 8N- - - - - MEA0N- - - - - -MEAN- - - - - -MEAN- - - - - -MEAN- - - - - CAMPIN RANE 0. - 0. - 8. Mega New aby Nut is included. Collet and wrench must be ordered separately.. Weight does not include collet.. Designed to be capable of supplying coolant through spindle.. - 0 7 87 8-8 NC0- MN0 0 7 0. - 70-8 NC- MN 00 0. - 70 8 8-8 NC- MN 00 7. - 7 87-8 NC- MN 0 7 is recommended with the use of coolant through cutting tools. 8 8 8 98 8 7 7 7 87 0 7 7 - -,000 9,000,000 9,000. The "MAX" allowable spindle speed listed in the table is directly influenced by the rigidity of the machine and balance of cutting tool. Therefore, it is possible that the max. allowable speed may not always be achievable. I-PUS toolholders can be used in machining centers with conventional spindles. For MEA PERFECT SEA: P COET NC - NC 8- SPINDE SYSTEM DUA CONTACT NUT MN MN 8 WEIT.0.0...8....0.0...8.......7....7.......8.0.....7.8.0......8.9.. For NEW AY COET P For MEA WRENC P7 For ADJUSTIN SCREW P7
SPINDE SYSTEM DUA CONTACT. Mega New aby Nut is included. Collet and wrench must be ordered separately.. Weight does not include collet.. Designed to be capable of supplying coolant through spindle. T0-MEA N- - -MEA 8N- - -MEA0N- - -0-0 -MEAN- - -0-0 -MEAN- - - -0 -MEAN- - - -0 CAMPIN RANE 0. - 0. - 8. - 0. -. -. - is recommended with the use of coolant through cutting tools. T No. COET NUT 7 7 -,000 NC - MN 7 9,000 7 - NC 8- MN 8 7 7,000 8-8,000 NC0- MN0 0 0 97 7 7 8,000,00 -,000 NC- MN 0 0 97 8,000,00 7,000 7,000 7 7,000 8-8 7 NC- MN 0,000 7-8 NC- MN 0,000. The "MAX" allowable spindle speed listed in the table is directly influenced by the rigidity of the machine and balance of cutting tool. Therefore, it is possible that the max. allowable speed may not always be achievable. I-PUS toolholders can be used in machining centers with conventional spindles. For MEA PERFECT SEA: P T =JIS 9(I-PUS) Adjusting Screw (Optional) WEIT.7.8.9.8.9...9..7.7.9...7.0....8......9..7 For NEW AY COET P For MEA WRENC P7 For ADJUSTIN SCREW P7 The New aby Collet is world renowned for its unmatched accuracy and precision. It offers runout less than micron at the collet nose, which is a decided advantage in high speed machining. øa NEW AY COET NC - 0. AA Class (AA) Max. Collet Capacity Max. ody Capacity New aby Collet Max. Runout (Micron) Collet Class At nose At end of test bar CASS AA Within µm d Within µm NEW AY COET øa Use only a cutting tool shank with exactly the same diameter as the collet bore diameter. The tolerance of the cutting tool shank must be within h7. MEAN NC -0. AA -0.AA - AA -.AA -. AA -.AA - AA -.AA -. AA -.AA - AA -.AA -.AA -. AA -.AA - AA -.AA -. AA -.AA - AA -.AA -. AA -.AA - AA Clamping Range 0. - 0.0 0.0-0. 0. -.00.00 -.. -.0.0 -.. -.00.00 -.. -.0.0 -.. - 0.9 -. 0 -.. -.0.0 -.. - 0 0 -.. -.0.0 -.. -.00.00 -.. -.0.0 -.. -.00 øa=9. = MEAN Clamping Range NC- AA. - -.AA.9 -. -. AA -. - AA. - -. AA -. - AA. -.0 -. AA.0 -. - AA. -.0 -. AA.0 -. - 7 AA. - 7.0-7. AA 7.0-7. - 8 AA 7. - 8.0-8. AA 8.0-8. - 9 AA 8. - 9.0-9. AA 9.0-9. -0 AA 9. - 0.0-0. AA 0.0-0. - AA 0. -.0 -. AA.0 -. - AA. -.0 -. AA.0 -. - AA. - øa=. = MEAN NC -E AA -E AA -E AA -E AA øa=9. =7 MEAN NC- E AA - E AA - E AA - E AA - 8E AA -0E AA -E AA øa= =8.0.0.0.0 8.0 0.0.0 MEA8N Clamping Range NC 8- AA 0. -.0 -. AA.0 -. - AA. -.0 -. AA.0 -. - AA. - -.AA.9 -. -. AA -. - AA. - -. AA -. - AA. -.0 -. AA.0 -. - AA. -.0 -. AA.0 -. -7 AA. - 7.0-7. AA 7.0-7. -8 AA 7. - 8.0 øa=. =8 MEAN Clamping Range. - -.. - -.. -.0.0 -.. -.0.0 -.. - 7.0 7.0-7. 7. - 8.0 8.0-8. 8. - 9.0 9.0-9. 9. - 0.0 0.0-0. 0. -.0.0 -.. -.0.0 -.. - -.. - -.. -.0.0 -.. -.0 NC- AA -.AA - AA -.AA - AA -.AA - AA -.AA - 7 AA - 7.AA - 8 AA - 8.AA - 9 AA - 9.AA -0 AA -0.AA - AA -.AA - AA -.AA - AA -.AA - AA -.AA - AA -.AA - AA øa=. = MEA8N NC 8-E AA -E AA -E AA -E AA -8E AA øa= = MEAN NC- E AA - E AA - E AA - E AA - 8E AA -0E AA -E AA -E AA -E AA øa= =.0.0 8.0.0.0 8.0 0.0.0.0 MEA0N Clamping Range NC0- AA. -.0 -. AA.0 -. - AA. - -.AA.9 -. -. AA -. - AA. - -. AA -. - AA. -.0 -. AA.0 -. - AA. -.0 -. AA.0 -. - 7 AA. - 7.0-7. AA 7.0-7. - 8 AA 7. - 8.0-8. AA 8.0-8. - 9 AA 8. - 9.0-9. AA 9.0-9. -0 AA 9. - 0.0 øa=. =7 MEAN NC- AA -.AA - AA -.AA - AA -.AA - AA -.AA - 7 AA - 7.AA - 8 AA - 8.AA - 9 AA - 9.AA -0 AA -0.AA - AA -.AA - AA -.AA - AA -.AA - AA -.AA - AA -.AA - AA -.AA -7 AA -7.AA -8 AA -8.AA -9 AA -9.AA - AA øa=8. =8 MEA0N NC0- E AA - E AA - E AA - E AA - 8E AA -0E AA øa= = MEAN NC- E AA - E AA - E AA - E AA - 8E AA -0E AA -E AA -E AA -E AA -E AA øa=8 = Clamping Range. - -.. - -.. -.0.0 -.. -.0.0 -.. - 7.0 7.0-7. 7. - 8.0 8.0-8. 8. - 9.0 9.0-9. 9. - 0.0 0.0-0. 0. -.0.0 -.. -.0.0 -.. - -.. - -.. -.0.0 -.. -.0.0 -.. - 7.0 7.0-7. 7. - 8.0 8.0-8. 8. - 9.0 9.0-9. 9. -.0.0.0 8.0 0.0.0.0 8.0 0.0.0.0.0
SPINDE SYSTEM DUA CONTACT MEA PERFECT SEA Sealed collet nut for coolant-through tools COOANT PRESSURE TRUST MPS - 0 A TiN COATIN 7MPa NC COET SEA (PS RIN) Tool Shank Dia. Clamping Range : ø - ø. Replaceable ody Size Seal Mega Perfect Seal Standard NC Collet ODY + MEA PERFECT SEA Order Example Please specify model numbers of the ody, NC Collet and Mega Perfect Seal when ordering. Mega New aby Chuck model Nut is not included. T-MEAN-/N NC Collet model NC-AA MEA PERFECT SEA Mega Perfect Seal model MPS-0 Reliable coolant supply to the tool tip! Unique design increases sealing performance with higher coolant pressure to create a "perfect seal". [PS RIN] way coolant Through Tools With PS RIN Jet Through Without PS RIN PS - 0 PS Ring Replaceable seal is installed in the MEA PERFECT SEA Replacement seal is recommended when coolant leaks due to damage of the PS Ring. PS-0 00 00 07 0708 Cutter Shank Dia. MPS -0 -. -0 - -00 -. -00 - -00 -. -00 - MPS 8-0 -. -0 - -00 -. -00 - -00 -. -00 - -0 -. -07-7 -070 7-7. -0708 7-8 MPS0-0 -. -0 - -00 -. -00 - -00 -. -00 - -0 -. -07-7 -070 7-7. -0708 7-8 -0808 8-8. -0809 8-9 -09 9-9. -090 9-0 MPS-0 -. -0 - -00 -. -00 - -00 -. -00 - -0 -. -07-7 -070 7-7. -0708 7-8 -0808 8-8. -0809 8-9 -09 9-9. -090 9-0 -0 0-0. -0 0 - - -. - - - -. - - Corresponding MPS MPS -0,0 00,00 00,00 0,07 070,0708 package contains pcs. ( size)...9..9.....9. Collet NC - -. - -. - -. - -. - -. - - NC 8- - - -. - - - -. - - - -. - - 7 - - 7. -7-8 -7-8 NC0- - - -. - - - -. - - - -. - - 7 - - 7. -7-8 -7-8. -8-9 -8-9. -9-0 -9-0 NC- - - -. - - - -. - - - -. - - 7 - - 7. -7-8 -7-8. -8-9 -8-9. -9-0 -9-0. -0 - -0 -. - - - -. - - - - PS-0809 090 0 MPS-0-0 -00-00 -00-00 -0-07 -070-0708 -0808-0809 -09-090 -0-0 - - - - - - - MPS-0-0 -00-00 -00-00 -0-07 -070-0708 -0808-0809 -09-090 -0-0 - - - - - - - -7-78 -89-9 Corresponding MPS MPS -0808,0809 09,090 0,0,, Cutter Shank Dia. -. - -. - -. - -. - 7 7-7. 7-8 8-8. 8-9 9-9. 9-0 0-0. 0 - -. - -. - - - - -. - -. - -. - -. - 7 7-7. 7-8 8-8. 8-9 9-9. 9-0 0-0. 0 - -. - -. - - - - - 7 7-8 8-9 9 - pce. of PS Ring is included. To supply coolant to the periphery of the cutting tool, Adjusting Screw should not be mounted.......... PS- 7 78 89 9 Collet NC- - - -. - - - -. - - - -. - - 7 - - 7. -7-8 -7-8. -8-9 -8-9. -9-0 -9-0. -0 - -0 -. - - - -. - - - -. - -. - -. - - NC- - - -. - - - -. - - - -. - - 7 - - 7. -7-8 -7-8. -8-9 -8-9. -9-0 -9-0. -0 - -0 -. - - - -. - - - -. - -. - -. - -. - - 7. -7-8. -8-9. -9 - Corresponding MPS MPS - 7 78 89 9 Nut is not included as a standard accessory in the ody models with "N" at the end. Please order the suitable Mega Perfect Seal separately. ody Mega Perfect Seal is not included. T-MEA N- /N - /N - /N -/N -/N -MEA 8N- /N - /N - /N -/N -/N -MEA0N- /N - /N - /N -/N -/N -MEAN- /N - /N - /N -/N -/N -MEAN- /N - /N - /N -/N -MEAN- /N - /N - /N -/N T0-MEA N-/N - /N - /N -/N -/N /N /N /N -MEA 8N- /N - /N - /N -/N -/N /N /N /N -MEA0N- /N - /N - /N -/N -/N /N /N /N. Mega Perfect Seal Collet and wrench must be ordered separately.. Designed to be capable of supplying coolant through spindle.. I-PUS toolholders can be used in machining centers with conventional spindles. - - 8-0 - - - - - 8-0 For axially adjustable range (), weight and max. speed, refer to pages to. For dimension, refer to the table on the previous page. Mega Perfect Seal MPS - MPS 8- MPS - MPS 8- ody Mega Perfect Seal is not included. T0-MEAN- /N - /N - /N -/N -/N /N /N /N -MEAN- /N - /N - /N -/N -/N /N /N /N -MEAN- /N - /N - /N -/N -/N /N /N /N T0-MEA N- /N -/N /N /N -MEA 8N- /N -/N /N /N -MEA0N- /N -/N /N /N -0/N -0/N -MEAN- /N -/N /N /N -0/N -0/N -MEAN- /N - /N -/N /N /N -0/N -MEAN- /N - /N -/N /N /N -0/N - - - - - 8-0 - - - 0 0 0 0 0 0 Adjusting Screw (Optional) Mega Perfect Seal MPS - MPS 8- MPS0- MPS- MPS- MPS- MPS0- MPS- MPS- MPS- MPS0- MPS- MPS- MPS-
SPINDE SYSTEM DUA CONTACT MEA NUT Notch-free design eliminates vibration as well as reduces wind noise and coolant spray. Original internal construction prevents steel ball bearings from jumping out due to centrifugal force at high speed revolution. MEA WRENC MN Max. Clamping Dia. Mega Nut Firm tightening by one way clutch system with roller bearings. Tightening force is easily distributed to the entire outer surface of the nut. The ratchet function easily tightens and loosens the nut. MR ADJUSTIN SCREW For adjusting cutting tool projection COET EJECTOR Inner Dia. of Wrench Mega Wrench For easy assembly or removal of New aby Collet Inside Taper Cleaner of Collet Chucks TAPER CEANER Maintain the precision of collet chucks SC-NC SC-NC 8 SC-NC0 SC-NC SC-NC SC-NC Rubber CUCK MEA N MEA 8N MEA0N MEAN MEAN MEAN OCK øa MN MN 8 MN0 MN MN MN NA NA 8 NA0 NA NA NA øa. 7 7 7 CUCK MEA N MEA 8N MEA0N MEAN MEAN MEAN WRENC MR MR MR MR MR MR CUCK MR MR MR MR MR MR M 7 M 9 M M M8 M 00 0 0 70 80. MEA N MEA 8N MEA0N MEAN MEAN MEAN CUCK MEA N MEA 8N MEA0N MEAN MEAN MEAN NUT COET NC -CE NC 8-CE NC0-CE NC-CE Toolholder taper cleaner TOOIN CEANER MN MN 8 MN0 MN Cleans both taper and flange of the T toolholders. Cleaning strip for Face Cleaning strip for taper SCE- SCE-0 NC NC 8 NC0 NC CUCK T T T0 T0 T - MEA E - 0 ength Mega E Chuck Max. ody Capacity Mega Chuck I-PUS Taper No. T-MEA E- 0 - - - MEA 8E- 0 - - - MEA 0E- 0 - - - MEA E- 0 - - - T0-MEA E- - - - - MEA 8E- - - - - -MEA 0E- - - - - MEA E- - - - - CAMPIN RANE - - 8-0 - - - 8-0 -. Nut is included. Collet and wrench must be ordered separately.. Weight does not include a collet.. Designed to be capable of supplying coolant through spindle. Clamping Range : ø - ø.7 9.9.... 7. 0.. 9.7... 8.7..9. 9. 0.7. 8.7..9 9..8 8. 0.9.. 8.8...7 8 0.. 7.. 0 0 0 0 9 79 9 80 0. 8 7. 8 8 7 7 87 0 7 8 7 7 87 0 70 9 7 7 87 0 70 9 9 7 70 T No. 7 - - 8-8 0-8 0-7 - - 8-8 - 8 0 - Coolant-Through ole F o r e n d m ill s Exclusively designed with the advanced technology for high speed endmilling. The long gripping length of the collet provides a powerful gripping force. The shallow taper of the collet improves concentricity. The substantial body design enhances rigidity to prevent chatter and deflection. 0,000,000,000 0,000,000,000 9,000,000,000 8,000,000,000,000 9,000 9,000 7,000 9,000 9,000 7,000 9,000 9,000 7,000,000 9,000 9,000,000,000 T =JIS 9(I-PUS) COET MEC - MEC 8- MEC - MEC 8- MEC0- MEC- MEC0- MEC- NUT MEN MEN 8 MEN0 MEN MEN MEN 8 MEN0 MEN Adjusting Screw (Optional) WEIT 0. 0. 0.7 0.8 0. 0.7 0.8 0.9 0. 0.80 0.9.0 0. 0..0..08...9...8.......7.0......78.98.7 7.9...8.07..80.. The "MAX" allowable spindle speed listed in the table is directly influenced by the rigidity of the machine and balance of cutting tool. Therefore, it is possible that the max. allowable speed may not always be achievable. I-PUS toolholders can be used in machining centers with conventional spindles. For MEA E PERFECT SEA P For MEA E COET P 7 8
SPINDE SYSTEM DUA CONTACT T0-MEA E- - MEA 8E- - MEA 0E- - MEA E- -. Nut is included. Collet and wrench must be ordered separately.. Weight does not include a collet.. Designed to be capable of supplying coolant through spindle. MEA WRENC MR MEA E NUT Inner Dia. of Wrench Mega Wrench MEN MEN 8 MEN0 MEN CAMPIN RANE - - 8-0 - Inside Taper Cleaner of Collet Chucks TAPER CEANER Maintain the precision of collet chucks NUT OUTER DIA. SC-MEC SC-MEC 8 SC-MEC0 SC-MEC T0 - MEA E - ength Mega E Chuck Max. ody Capacity Mega Chuck I-PUS Taper No. OCK... 9.. 0. 8.. 0.0. 9...0 9.0.7 CUCK MEA E 8E 0E E CUCK MEA E MEA 8E MEA0E MEAE 7 7 7 7.The "MAX" allowable spindle speed listed in the table is directly influenced by the rigidity of the machine and balance of cutting tool. Therefore, it is possible that the max. allowable speed may not always be achievable. I-PUS toolholders can be used in machining centers with conventional spindles. MR MR MR MR 00 0 0 70 Recommended Tightening Torque (N m) N m N m 0N m 0N m CUCK MEA E 8E 0E E The recommended tightening torque is achieved by using genuine wrenches. ADJUSTIN SCREW Rubber T No. 7 - - 8-8 0 -,000 9,000,000,000,000 For MEA E PERFECT SEA P For adjusting cutting tool projection NA NA 8 NA0 NA COET MEC - MEC 8- MEC0- MEC- M 7 M 9 M M NUT MEN MEN 8 MEN0 MEN. WEIT.8..9.9.....9....0 Please be aware of the different sizes of the suitable MEA WRENC between MEA E CUCK and MEA NEW AY CUCK. Toolholder taper cleaner TOOIN CEANER Cleans both taper and flange of the T toolholders. Cleaning strip for Face Cleaning strip for taper For MEA E COET P SCE- SCE-0 Adjusting Screw (Optional) CUCK MEA E 8E 0E E CUCK T T T0 T0 MEA E COET MEA E PERFECT SEA 9 COOANT PRESSURE 7MPa MEA E COET(MEC) EPS - 0 ody Size Mega Perfect Seal Ideal for burnishing drills and reamers due to extended gripping length of MEA E Chuck. [PS RIN] MEC Clamping Range : ø Replaceable seal is installed in the MEA PERFECT SEA Replacement seal is recommended when coolant leaks due to damage of the PS Ring. - Inner Dia. of Collet Max. ody Capacity MEA E COET ODY /MEA E ODY /MEA 8E ODY /MEA0E ODY /MEAE Insertion ength Insertion ength Insertion ength Insertion ength MEC-AA -AA -AA -AA =.9 =. NUT =MEN 9 7 MEC8-AA -AA -AA -AA -7AA -8AA 7 8 9 8 9 MEC0- AA - AA - AA - AA - 7AA - 8AA 7 8 9 8 9. MEC- AA - AA - AA - AA - 7AA - 8AA 7 8 9 8 9. =9. =. NUT =MEN8-9AA -0AA 9 0 7-9AA -0AA 9 0 Use only a cutting tool shank with exactly the same diameter as the collet bore diamater. =.7 =7. NUT =MEN0 -AA -AA 7 9 The tolerance of the cutting tool shank must be within h7. =.9 =. NUT =MEN Sealed collet nut for coolant-through tools Reliable coolant supply to the tool tip! Unique design increases sealing performance with higher coolant pressure to create a "perfect seal". Remove the PS Ring, to supply coolant to the cutting tool periphery. EPS -0-0 -0-0 EPS 8-0 -0-0 -0-07 -08 EPS0-0 -0-0 -0-07 -08-09 -0 PS - 0 PS Ring.......7 PS-0-00 -00-07 -0708-0809 Cutter Collet Shank Dia. MEC - - - - MEC 8- - - - 7-7 8-8 MEC0- - - - 7-7 8-8 9-9 0-0 CUCK EPS -0-0 -0-0 -07-08 PS-090-0 - - TRUST A NC COET Cutter Shank Dia. Collet EPS-0-0 -0-0 -07-08 -09-0... 7 8 9 0 MEC- - - - - 7-8 - 9-0 - -. - - pce. of PS Ring is included. To supply coolant to the periphery of the cutting tool, Adjusting Screw should not be mounted. CUCK EPS -09-0 - - package contains pcs. ( size). Collet Class AA Micron Micron d TiN COATIN SEA (PS RIN) Max. Runout (Micron) At nose At end of test bar Within µm Within µm Replaceable Seal
SPINDE SYSTEM DUA CONTACT Clamping Range : ø - ø0 Coolant-Through ole F o r e n d m ill s Type D T =JIS 9(I-PUS) T - MEA D - ength Double Power Chuck Max. Capacity Mega Chuck I-PUS Taper No. T/0 T-MEAD- -MEAD- T0-MEAD- - -MEAD- - - -MEAD- 8 - -MEAD- - "FK" version is not available for T models. Adjusting Screw (optional) Fig. Fig. Fig CAMPIN RANE.7 0 0.7 70.7.7 70.7 8..... 8 78 08 8 7 8 78 9 08 8 7 7 Close to integral rigidity and precision of a solid toolholder. Advanced technology for high speed and heavy duty endmilling. Two types are available, Type D for use with/without coolant through the tool and Type DS to feed coolant to cutting tool periphery. Type DS Adjusting Screw (optional) Insertion ength 7 For coolant to cutting tool periphery,000,000,000 7,000,000,000 7,000,000,000,000,000,000 For TYPE DS P Mega Double Power Chuck with slots for C-Wrench is available upon request. Please add "FK" after each model number when ordering. Example : T0-MEAD-FK WRENC MR MR0 MR MR MR MR70 WEIT 0.8 0.9...8...7...7...0..7.7....7. T0 T0-MEAD- -0 -MEAD- -0 -MEAD- -0 -MEAD- - -0-0 -MEAD- -MEA0D- Fig CAMPIN RANE 0 0 0 0 0. Wrench must be ordered separately.. The "MAX" allowable spindle speed listed in the table is directly influenced by the rigidity of the machine and balance of cutting tool. Therefore, it is possible that the max. allowable speed may not always be achievable. I-PUS holders can be used in machining centers with conventional spindles. 0 70 80 99 Adjustable STRAIT COET (Type "C") 9 8 99.7 7 AC - 7 8 8 8 9 Inner Dia. Outer Dia. Adjustable Straight Collet COOANT FEED STRAIT COET (Type "OCA") OCA - Oil ole Collet Inner Dia. Outer Dia... 9...... 8. 8 7 97 7 7 97 7 7 97 7. 7 97 7 0 7 7 Insertion ength 7 7 ADJUSTAE STRAIT COET AC -, 8, 0,,, AC -, 8, 0,,,, AC -, 8, 0,,,,, AC -, 8, 0,,,,,. Coolant through is not provided, see below. SEAED STRAIT COET,000 9,000,000 9,000 7,000,000,000 9,000 7,000,000,000,000,000,000 WRENC MR MR MR70 MR80 MR99 MR For STRAIT COET P For WRENC P WEIT...7. 7.0..0.8 7.7 9... 7. 8.9 0.8.8. 7.0 8. 9.9...0 7.8 9. 7. For ADJUSTIN SCREW P CUCK MEAD MEAD MEAD MEAD For Through tool with MEA-D /Jet Through with MEA-DS OCA -, 8, 0,,, OCA -, OCA -, 8, 0,,,,, OCA -, 8, 0,,,,, CUCK MEAD DS MEAD DS MEAD DS MEAD DS
Clamping Range : ø - ø0 SPINDE SYSTEM DUA CONTACT Coolant-Through ole Type DS For coolant to cutting tool periphery T =JIS 9(I-PUS) T - MEA DS - Max. Capacity Mega Chuck I-PUS Taper No. T/0 Adjusting Screw (optional) T-MEADS- -MEADS- T0-MEADS- - -MEADS- - - -MEADS- 8 - -MEADS- - Double Power Chuck for type DS Fig. Fig. Fig CAMPIN RANE 0 70.7 0.7.7.7 70.7 COOANT. 07. 7. 7... 07.. 7. 7.. 87. 07. 7. 7.. 9. 07. 7. 7.. 8.. 7.. 0. 80. 0. 0.. 0. 80. 9. 0. 0.. Adjusting Screw (optional) 7 7-8 7-8 7-8 7-78 7-8 Insertion ength 7,000,000,000 7,000,000,000 7,000,000,000,000,000,000 F o r MR MR0 MR MR MR MR70 e n d m COOANT WRENC 0.8 0.9...8...7...7...0..7.7....7. ill s WEIT T0 T0-MEADS- -0 -MEADS- -0 -MEADS- -0 -MEADS- - -0-0 -MEADS- -MEA0DS- Fig CAMPIN RANE 0 70 80 99 8 99.7 7 8 8 8 9 07. 7. 7... 07. 7. 7... 07. 7. 7... 9. 07. 7. 7.... 07 7 7. Wrench must be ordered separately.. The "MAX" allowable spindle speed listed in the table is directly influenced by the rigidity of the machine and balance of cutting tool. Therefore, it is possible that the max. allowable speed may not always be achievable. I-PUS toolholders can be used in machining centers with conventional spindles. 9 7 8 9 9. 99. 9... 9. 8. 99. 9... 9.. 99. 9....7 9.. 99. 9... 8. 8.. 7. 7 7-8 7-8 80-97 - 07 9 - Insertion ength 7 7,000 9,000,000 9,000 7,000,000,000 9,000 7,000,000,000,000,000,000 WRENC MR MR MR70 MR80 MR99 MR For STRAIT COET P For WRENC P WEIT...7. 7.0..0.8 7.7 9... 7. 8.9 0.8.8. 7.0 8. 9.9...0 7.8 9. 7. For ADJUSTIN SCREW P "FK" version is not available for T models. Mega Double Power Chuck with slots for C-Wrench is available upon request. Please add "FK" after each model number when ordering. Example : T0-MEADS-FK
SPINDE SYSTEM DUA CONTACT MEA WRENC CUCK MR Inner Dia. of Wrench Mega Wrench OCK MR MR0 MR MR MR MR70 MR80 MR99 MR 0 70 80 99 80 80 0 80 9 9 T-MEAD, DS T0-MEAD, D/FK, DS, DS/FK T0-MEAD, D/FK, DS, DS/FK T-MEAD, DS T0-MEAD, D/FK, DS, DS/FK T0-MEAD, D/FK, DS, DS/FK T0-MEAD, D/FK, DS, DS/FK T0-MEAD, D/FK, DS, DS/FK T0-MEAD, D/FK, DS, DS/FK T0-MEAD, D/FK, DS, DS/FK T0-MEAD, D/FK, DS, DS/FK T0-MEA0D, 0D/FK, 0DS, 0DS/FK Tensile Strength Improved y Utilizing Tool Steel (X0CrMOV). Toolholders may be pulled out of the machine spindle at high speeds due to strong centrifugal forces. Strong MEA PUSTUDS are recommended to protect against this possibility. It is recommended to use MEA PUSTUDS, especially in the case of I-PUS dual contact applications. PT-M PT-M PM(JIS) PM(JIS) P0T-M P0T-M 0PM(JIS) P0T-M STANDARD with a hole through P0T-M 0PM(JIS) P0T-M P0T-M 0PM(JIS) P0T-M P0T-M 0PM(JIS) STANDARD MAS- JIS MAS- MAS- JIS MAS- with a hole through with a hole through MAS- MAS- JIS JIS MAS- MASwith a hole through JIS MASwith a hole through MASwith a hole through with a hole JIS through DIN standard or other types of Mega Pullstuds are also available upon request. C-WRENC ADJUSTIN SCREW W NK FK- FK8- FK8- FK80- FK9-00 FK0- MA-M MA-MS MA-M 70 0 80 80 9 9 7 7 9. T0-MEAD/FK, DS/FK T0-MEAD/FK, DS/FK T0-MEAD/FK, DS/FK T0-MEAD/FK, DS/FK T0-MEAD/FK, DS/FK T0-MEAD/FK, DS/FK T0-MEAD/FK, DS/FK T0-MEAD/FK, DS/FK T0-MEAD/FK, DS/FK T0-MEA0D/FK, 0DS/FK MP. MP. MP. CUCK W CUCK 8 MEAD, DS MEAD, DS 0 T0-MEAD/DS T0-MEAD/DS 0 MEAD/DS MEA0D/DS T0 ø T0 Rd C (SC) 8 Comparison of the max. radial depth of cut. MEA E CUCK MACINE TOO TOO ODER CUTTER WORK MATERIA SPINDE SPEED CUTTIN SPEED FEED RATE T0 (Vertical Machining Center) T0-MEAE- T0-ø- (Other manufacturer) ø -Flute Carbide End Mill C (SC),7 (min-) 0 (m/min.) (mm/min.) 0.08 (mm/tooth) MEA DOUE POWER CUCK MACINE TOO T0 (Vertical Machining Center) 0 T0-MEAE-. T0-ø- (Other manufacturer) 8 0 Max. radial depth of cut Rd (mm) Toolholder taper cleaner TOOIN CEANER Cleans both taper and flange of the T toolholders. Cleaning strip for Face Cleaning strip for taper SCE- SCE-0 CUCK T T T0 T0 ø Rd C (SC) 8 TOO ODER CUTTER WORK MATERIA SPINDE SPEED CUTTIN SPEED FEED RATE T0-MEAD- T0-ø- (Other manufacturer) ø -Flute Carbide End Mill C (SC),7 (min-) 00 (m/min.) 0 (mm/min.) 0. (mm/tooth) T0-MEAD- 0 T0-ø- (Other manufacturer) 7 0 8 0 Max. radial depth of cut Rd (mm) T0 MEA DOUE POWER CUCK MACINE TOO T0 (Vertical Machining Center) TOO ODER T0-MEAD- T0-ø- (Other manufacturer) T0-MEAD- ø Rd C (SC) 8 CUTTER WORK MATERIA SPINDE SPEED CUTTIN SPEED FEED RATE ø -Flute Roughing end Mill C (SC) 70 (min-) (m/min.) 0 (mm/min.) 0. (mm/tooth) T0-ø- (Other manufacturer) 8 0 8 0 8 Max. radial depth of cut Rd (mm)